The discovery of novel biomaterials that are optimized for a specific biological application is readily achieved using polymer microarrays, which allows a combinatorial library of materials to be screened in a parallel, high throughput format ¹. Herein is described the formation and characterization of a polymer microarray using an on-chip photopolymerization technique ². This involves mixing monomers at varied ratios to produce a library of monomer solutions, transferring the solution to a glass slide format using a robotic printing device and curing with UV irradiation. This format is readily amenable to many biological assays, including stem cell attachment and proliferation, cell sorting and low bacterial adhesion, allowing the ready identification of 'hit' materials that fulfill a specific biological criterion ^3-5. Furthermore, the use of high throughput surface characterization (HTSC) allows the biological performance to be correlated with physio-chemical properties, hence elucidating the biological-material interaction ⁶. HTSC makes use of water contact angle (WCA) measurements, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). In particular, ToF-SIMS provides a chemically rich analysis of the sample that can be used to correlate the cell response with a molecular moiety. In some cases, the biological performance can be predicted from the ToF-SIMS spectra, demonstrating the chemical dependence of a biological-material interaction, and informing the development of hit materials ^5,3.

Langmuir : the ACS Journal of Surfaces and Colloids

We report on the design, stepwise synthesis, and surface analysis of enzyme-responsive surfaces that present cell adhesive RGD sequences on-demand, that is, by enzymatic hydrolysis of inactive RGD containing precursors that carry cleavable steric blocking groups. These surfaces, incorporating poly(ethylene glycol) (PEG) monolayers coupled via epoxy silanes to glass, are functionalized via stepwise solid phase synthesis, presenting a versatile and straightforward approach to preparation of peptide surfaces. Successive amino acid coupling and deprotection steps using fluorenylmethoxycarbonyl (Fmoc) chemistry are verified using surface analysis with time-of-flight secondary-ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS). Exposure of surfaces to elastase results in activation of cell binding ligands as demonstrated using osteoblast cells. These surfaces may have applications in spatiotemporally controlled attachment of cells as relevant for three-dimensional tissue engineering scaffolds and cell-based biosensors.

Langmuir : the ACS Journal of Surfaces and Colloids

Carbohydrate microarrays are essential tools to determine the biological function of glycans. Here, we analyze a glycan array by time-of-flight secondary ion mass spectrometry (ToF-SIMS) to gain a better understanding of the physicochemical properties of the individual spots and to improve carbohydrate microarray quality. The carbohydrate microarray is prepared by piezo printing of thiol-terminated sugars onto a maleimide functionalized glass slide. The hyperspectral ToF-SIMS imaging data are analyzed by multivariate curve resolution (MCR) to discern secondary ions from regions of the array containing saccharide, linker, salts from the printing buffer, and the background linker chemistry. Analysis of secondary ions from the linker common to all of the sugar molecules employed reveals a relatively uniform distribution of the sugars within the spots formed from solutions with saccharide concentration of 0.4 mM and less, whereas a doughnut shape is often formed at higher-concentration solutions. A detailed analysis of individual spots reveals that in the larger spots the phosphate buffered saline (PBS) salts are heterogeneously distributed, apparently resulting in saccharide concentrated at the rim of the spots. A model of spot formation from the evaporating sessile drop is proposed to explain these observations. Saccharide spot diameters increase with saccharide concentration due to a reduction in surface tension of the saccharide solution compared to PBS. The multivariate analytical partial least squares (PLS) technique identifies ions from the sugars that in the complex ToF-SIMS spectra correlate with the binding of galectin proteins.

Journal of the American Chemical Society

Monolayers of monomer 1,3,5-tri(4-bromophenyl)benzene (TBPB) and the dimerized product 3,3''',5,5'''-tetra(4-bromophenyl)quaterphenyl (TBPQ) on a gold surface have been studied using ambient scanning tunneling microscopy and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Molecular layers are prepared by allowing sessile drops of solution to dry on a gold substrate. For room-temperature deposition we observe ordered arrays of TBPB in three distinct packing arrangements. Deposition on a heated substrate leads to the formation of the dimerized product, TBPQ, through a surface-induced aryl-aryl coupling. Regions of TBPQ coexist with regions of disordered multiply linked molecules. The conversion of monomer TPBP to dimers is confirmed using ToF-SIMS. Our results demonstrate an alternative, solution-phase approach to the formation of large molecules and nanostructures by coupling reactions.

Journal of Materials Science. Materials in Medicine

Three different formulations comprising two drugs, felodipine and hydrochlorothiazide (HCT) and two polymers, poly(vinyl pyrolidone) (PVP) and poly(lactic-co-glycolic acid) (PLGA) were inkjet printed as micro-dot arrays and analysed on an individual micro-spot basis by time-of-flight secondary ion mass spectrometry (ToF-SIMS). For the HCT/PLGA formulation, the spots showed heterogeneity of the drug and other chemical constituents. To further investigate these heterogeneities, multivariate curve resolution was applied to the ToF-SIMS hyperspectral image datasets. This approach successfully identified distinct chemical components elucidating the HCT, PLGA, substrate material, and contaminants based on sulphur, phosphorous and sodium chloride. Spots printed using either of the drugs with PVP exhibited full substrate coverage and a uniform distribution of the active ingredient along with all other constituents within the printed spot area. This represents the preferred situation in terms of stability and controlling the release of a drug from a polymer matrix.

ACS Applied Materials & Interfaces

The modification of material surfaces with short peptide sequences has become an essential step in many biotechnological and biomedical applications. Due to their simple architecture compared to more complex 3D substrates, 2D surfaces are of particular interest for high throughput applications and as model surfaces for dynamic or responsive surface modifications. The decoration of these surfaces with peptides is commonly accomplished by synthesizing the peptide first and subsequently transferring it onto the surface of the substrate. Recently, several procedures have been described for the synthesis of peptides directly onto a 2D surface, thereby simplifying and accelerating the modification of flat surfaces with peptides. However, the wider use of these techniques requires a routine method to monitor the amino acid build-up on the surface. Here, we describe a fast, inexpensive and nondestructive fluorescence based method which is readily accessible to follow the amino acid build-up on solid 2D samples.