Translate this page to:
Choose Language…
In JoVE (1)
Other Publications (9)
- The Journal of Chemical Physics
- Journal of the American Chemical Society
- Physical Chemistry Chemical Physics : PCCP
- Journal of the American Chemical Society
- Angewandte Chemie (International Ed. in English)
- Langmuir : the ACS Journal of Surfaces and Colloids
- Clinical Biochemistry
- Journal of the American Chemical Society
- Journal of the American Chemical Society
Articles by Jaemin Kim in JoVE
JoVE Bioengineering
Alginate Microcapsule as a 3D Platform for Propagation and Differentiation of Human Embryonic Stem Cells (hESC) to Different Lineages
1Stem Cell Lab, School of Psychiatry, Faculty of Medicine, The University of New South Wales, 2Siriraj Center of Excellence for Stem cell Research, Faculty of Medicine Siriraj Hospital, Mahidol University, 3Neuropsychiatric Institute, Prince of Wales Hospital
We have optimized a microencapsulation technique as an effective 3D platform for propagation and differentiation of embryonic stem cells to endoderm and dopaminergic (DA) neurons. It also provides an opportunity for immune-isolation of cells from the host during transplantation. This platform can be adapted for other cell types.
Other articles by Jaemin Kim on PubMed
An Efficient Molecular Dynamics Simulation Method for Calculating the Diffusion-influenced Reaction Rates
We present a molecular dynamics (MD) simulation method for calculating the diffusion-influenced reaction rates in the limit of low reactant concentrations. To calculate the reaction rate coefficient, we use MD trajectories of a nonreactive equilibrium system that are initiated with a pair of reactant molecules in reactive configuration. Hence reaction systems involving complicated reactant molecules with geometrically restricted reactivities can be treated with comparable efficiency as the simple hard-sphere reaction system. Compared to the similar MD method proposed by Van Beijeren, Dong, and Bocquet [J. Chem. Phys. 114, 6265 (2001)], the present method has a couple of advantages. First, reactions involving more general sink functions can be treated. Second, more accurate results can be obtained when the reaction probability upon collision is less than unity. As an application, we investigate the effects of nondiffusive dynamics and hydrodynamic interaction of reactants on the reaction rate.
Synthesis of FePt Nanocubes and Their Oriented Self-assembly
Monodisperse FePt nanocubes are synthesized at 205 degrees C by controlling decomposition of Fe(CO)5 and reduction of Pt(acac)2 and addition sequence of oleic acid and oleylamine. Different from the assembly of the sphere-like FePt nanoparticles, which shows 3D random structure orientation, self-assembly of the FePt nanocubes leads to a superlattice array with each FePt cube exhibiting (100) texture. Thermal annealing converts the chemically disordered fcc FePt to chemically ordered fct FePt, and the annealed assembly shows a strong (001) texture in the directions both parallel and perpendicular to the substrate. This shape-controlled synthesis and self-assembly offers a promising approach to fabrication of magnetically aligned FePt nanocrystal arrays for high density information storage and high performance permanent magnet applications.
Electro-oxidation of Formic Acid Catalyzed by FePt Nanoparticles
The electrocatalytic oxidation of formic acid at a gold electrode functionalized with FePt nanoparticles was studied by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in a mixed solution of 0.1 M HCOOH and 0.1 M HClO4. The FePt bimetallic nanoparticles, with a mean diameter of 3 nm, were prepared by a chemical reduction method. The Au/FePt nanostructured electrode was prepared firstly by the deposition of FePt nanoparticles onto a clean Au electrode surface, followed by ultraviolet ozone treatment to remove the organic coating. In CV measurements, two well-defined anodic peaks were observed at +0.20 and +0.51 V (vs. a Ag/AgCl quasi-reference). The anodic peak at +0.20 V was attributed to the oxidation of HCOOH to CO2 on surface unblocked by CO, whereas the peak at +0.51 V was ascribed to the oxidation of surface-adsorbed CO (an intermediate product of HCOOH oxidation) and further oxidation of bulk HCOOH. From the onset potential and current density of the electro-oxidation of HCOOH, FePt nanoparticles exhibit excellent electrocatalytic activities as compared to Pt and other metal alloys. EIS measurements were carried out to further examine the reaction kinetics involved in the HCOOH electro-oxidation. The EIS responses were found to be strongly dependent on electrode potentials. At potentials more positive than -0.25 V (vs. Ag/AgCl), pseudo-inductive behavior was typically observed. At potentials between +0.3 and +0.5 V, the impedance response was found to reverse from the first quadrant to the second quadrant; such negative Faradaic impedance was indicative of the presence of an inductive component due to the oxidation of surface-adsorbed CO. The impedance responses returned to normal behavior at more positive potentials (+0.6 to +0.9 V). The mechanistic variation was attributed to the formation of different intermediates (CO or oxygen containing species) on the electrode surface in different potential regions. Two equivalent circuits were proposed to model these impedance behaviors.
Composition Effects of FePt Alloy Nanoparticles on the Electro-oxidation of Formic Acid
The catalytic activities of FexPt100-x alloy nanoparticles at different compositions (x=10, 15, 42, 54, 58, and 63) in the electro-oxidation of formic acid have been investigated by using cyclic voltammetry (CV), chronoamperometry, and electrochemical impedance spectroscopy (EIS). It was observed that the electrocatalytic performance was strongly dependent on the FePt particle composition. In chronoamperometric measurements, the alloy particles at x approximately 50 showed the highest steady-state current density among the catalysts under study and maintained the best long-term stability. In addition, on the basis of the anodic peak current density, onset potentials, and the ratios of the anodic peak current density to the cathodic peak current density in CV studies, the catalytic activity for HCOOH oxidation was found to decrease in the order of Fe42Pt58>Fe54Pt46 approximately Fe58Pt42>Fe15Pt85>Fe10Pt90>Fe63Pt37. That is, within the present experimental context, the alloy nanoparticles at x approximately 50 appeared to exhibit the maximum electrocatalytic activity and stability with optimal tolerance to CO poisoning. Consistent responses were also observed in electrochemical impedance spectroscopic measurements. For the alloy nanoparticles that showed excellent tolerance to CO poisoning, the impedance in the Nyquist plots was found to change sign from positive to negative with increasing electrode potential, suggesting that the electron-transfer kinetics evolved from resistive to pseudoinductive and then to inductive characters. However, for the nanoparticles that were heavily poisoned by adsorbed CO species during formic acid oxidation, the impedance was found to be confined to the first quadrant at all electrode potentials. The present work highlights the influence of the molecular composition of Pt-based alloy electrocatalysts on the performance of formic acid electro-oxidation, an important aspect in the design of bimetal electrocatalysts in fuel cell applications.
Comparison of Growth Factor and Cytokine Expression in Patients with Degenerated Disc Disease and Herniated Nucleus Pulposus
This study was conducted to investigate the expression of cytokines and growth factors in disc specimens obtained from patients with herniated nucleus pulposus (HNP) and degenerated disc disease (DDD).
FePt Nanoparticles As an Fe Reservoir for Controlled Fe Release and Tumor Inhibition
Chemically disordered face centered cubic (fcc) FePt nanoparticles (NPs) show the controlled release of Fe in low pH solution. The released Fe catalyzes H(2)O(2) decomposition into reactive oxygen species within cells, causing fast oxidation and deterioration of cellular membranes. Functionalized with luteinizing hormone-releasing hormone (LHRH) peptide via phospholipid, the fcc-FePt NPs can bind preferentially to the human ovarian cancer cell line (A2780) that overexpresses LHRH receptors and exhibit high toxicity to these tumor cells. In contrast, the fcc-FePt NPs pre-etched in the low pH (4.8) buffer solution show nonappreciable cytotoxicity. The work demonstrates that fcc-FePt NPs may function as a new type of agent for controlled cancer therapy.
Structurally Ordered FePt Nanoparticles and Their Enhanced Catalysis for Oxygen Reduction Reaction
We report the structure-controlled synthesis of FePt/MgO NPs and their catalysis for oxygen reduction reaction (ORR) in 0.5 M H(2)SO(4) solution. The synthesis yields fcc-FePt/MgO and fct-FePt/MgO NPs with the MgO coating being readily removed for catalytic studies. The fct-FePt NPs show higher activity and durability than the fcc-FePt in the ORR condition. The results indicate that the fully ordered fct-FePt could serve as a practical Pt-based catalyst for fuel cell applications.
