JoVE Bioengineering
Alginate Hydrogels for Three-Dimensional Organ Culture of Ovaries and Oviducts
Medicinal Chemistry and Pharmacognosy, University of Illinois at Chicago
Culture of normal cells in their three-dimensional context represents an alternative method to study early events required for cellular transformation and tumorigenesis. This method is used to grow normal ovarian and oviductal cells to study early events in ovarian cancer formation.
JoVE Clinical and Translational Medicine
Reduction in Left Ventricular Wall Stress and Improvement in Function in Failing Hearts using Algisyl-LVR
1Department of Surgery, UCSF/VA Medical Center, 2Clinical & Regulatory, LoneStar Heart, Inc.
This article describes procedures for implanting a novel hydrogel in failing hearts and quantifying its effect on left ventricular wall stress and function. These procedures have been successfully applied in dogs and humans.
JoVE Bioengineering
Bridging the Bio-Electronic Interface with Biofabrication
1Fischell Department of Bioengineering, University of Maryland, 2Institute for Bioscience and Biotechnology Research, University of Maryland, 3Department of Materials Science and Engineering, University of Maryland
This article describes a biofabrication approach: deposition of stimuli-responsive polysaccharides in the presence of biased electrodes to create biocompatible films which can be functionalized with cells or proteins. We demonstrate a bench-top strategy for the generation of the films as well as their basic uses for creating interactive biofunctionalized surfaces for lab-on-a-chip applications.
JoVE General
A 3D System for Culturing Human Articular Chondrocytes in Synovial Fluid
1Department of Anatomy and Cellular Biology, Tufts University School of Medicine, 2Department of Rheumatology, Tufts Medical Center
A 3D system of culturing human articular chondrocytes in high levels of synovial fluid is described. Synovial fluid reflects the most natural microenvironment for articular cartilage, and can be easily obtained and stored. This system thus can be used for studying cartilage regeneration and for screening therapeutics for treating arthritis.
JoVE Bioengineering
A Method for Ovarian Follicle Encapsulation and Culture in a Proteolytically Degradable 3 Dimensional System
1Institute for BioNanotechnology in Advanced Medicine, Northwestern University, 2Department of Obstetrics and Gynecology, Northwestern University, Feinberg School of Medicine, 3Center for Reproductive Research, Northwestern University, 4The Robert H. Lurie Comprehensive Cancer Center, Northwestern University, 5Department of Chemical and Biological Engineering, Northwestern University
A new method for ovarian follicle encapsulation in a 3D fibrin-alginate interpenetrating network is described. This system combines structural support with proteolytic degradation to support the development of immature follicles to produce mature oocytes. This method may be applied to culture cell aggregates to maintain cell-cell contacts without limiting expansion.
JoVE Bioengineering
Tracking Hypoxic Signaling within Encapsulated Cell Aggregates
1Biomedical Engineering Program, University of South Carolina, 2Chemical Engineering Department, University of South Carolina
A method for photo-encapsulation of cells in a crosslinked PEG hydrogel is described. Hypoxic signaling within encapsulated murine insulinoma (MIN6) aggregates is tracked using a fluorescent marker system. This system allows serial examination of cells within a hydrogel scaffold and correlation of hypoxic signaling with changes in cell phenotype.
JoVE Bioengineering
Constructing a Collagen Hydrogel for the Delivery of Stem Cell-loaded Chitosan Microspheres
Department of Regenerative Medicine, United States Army Institute of Surgical Research
A major hurdle in current stem cell therapies is determining the most effective method to deliver these cells to host tissues. Here, we describe a chitosan-based delivery method that is efficient and simple in approach, while allowing adipose-derived stem cells to maintain their multipotency.
JoVE Bioengineering
Density Gradient Multilayered Polymerization (DGMP): A Novel Technique for Creating Multi-compartment, Customizable Scaffolds for Tissue Engineering
1Skaggs School of Pharmacy and Pharmaceutical Sciences, University of California, San Diego, 2Biomedical Sciences Program, University of California, San Diego, 3Department of Bioengineering, University of California, San Diego
Here we describe a unique strategy for creating biocompatible, layered matrices with continuous interfaces between distinct layers for tissue engineering. Such a scaffold could provide an ideal customizable environment to modulate cell behavior by various biological, chemical or mechanical cues
JoVE Clinical and Translational Medicine
Generation of Alginate Microspheres for Biomedical Applications
1Department of Chemical and Biological Engineering, Illinois Institute of Technology, 2Department of Biomedical Engineering, Illinois Institute of Technology, 3Department of Biomedical Engineering, University of California at Irvine, 4Wake Forest Institute for Regenerative Medicine and Department of Biomedical Engineering, Wake Forest University Health Sciences, 5Research Service, Hines Veterans Administration Hospital
In the following sections, we outline procedures for the preparation of alginate microspheres for use in biomedical applications. We specifically illustrate a technique for creating multilayered alginate microspheres for the dual purpose of cell and protein encapsulation as a potential treatment for type 1 diabetes.
JoVE Bioengineering
Alginate Microcapsule as a 3D Platform for Propagation and Differentiation of Human Embryonic Stem Cells (hESC) to Different Lineages
1Stem Cell Lab, School of Psychiatry, Faculty of Medicine, The University of New South Wales, 2Siriraj Center of Excellence for Stem cell Research, Faculty of Medicine Siriraj Hospital, Mahidol University, 3Neuropsychiatric Institute, Prince of Wales Hospital
We have optimized a microencapsulation technique as an effective 3D platform for propagation and differentiation of embryonic stem cells to endoderm and dopaminergic (DA) neurons. It also provides an opportunity for immune-isolation of cells from the host during transplantation. This platform can be adapted for other cell types.
JoVE Bioengineering
Fabrication of Micropatterned Hydrogels for Neural Culture Systems using Dynamic Mask Projection Photolithography
Biomedical Engineering, Tulane University
Simple techniques are described for the rapid production of microfabricated neural culture systems using a digital micromirror device for dynamic mask projection lithography on regular cell culture substrates. These culture systems may be more representative of natural biological architecture, and the techniques described could be adapted for numerous applications.
JoVE General
Studying the Effects of Matrix Stiffness on Cellular Function using Acrylamide-based Hydrogels
Department of Pharmacology, University of Pennsylvania
The effect of substrata stiffness on cellular function can be modeled in vitro using polyacrylamide hydrogels of varying compliances.
JoVE Applied Physics
Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics
Department of Mechanical Engineering, Massachusetts Institute of Technology
We demonstrate controlled pattern transformation of swelling gel tubes by elastic instability. A simple projection micro stereo-lithography setup is built using an off-the-shelf digital data projector to fabricate three-dimensional polymeric structures in a layer-by-layer fashion. Swelling hydrogel tubes under mechanical constraint display various circumferential buckling modes depending on dimension.
JoVE Applied Physics
Synthesis of Phase-shift Nanoemulsions with Narrow Size Distributions for Acoustic Droplet Vaporization and Bubble-enhanced Ultrasound-mediated Ablation
Department of Mechanical Engineering, Boston University
Phase-shift nanoemulsions (PSNE) can be vaporized using high intensity focused ultrasound to enhance localized heating and improve thermal ablation in tumors. In this report, the preparation of stable PSNE with a narrow size distribution is described. Furthermore, the impact of vaporized PSNE on ultrasound-mediated ablation is demonstrated in tissue-mimicking phantoms.
JoVE General
Mechanical Stimulation of Chondrocyte-agarose Hydrogels
1Department of Mechanical and Materials Engineering, Queen's University, 2Department of Chemical Engineering, Queen's University
The biosynthesis of cartilaginous extracellular matrix by chondrocytes can be affected by application of mechanical stimuli. This method describes the technique of applying dynamic compressive strains to chondrocytes encapsulated in 3D constructs and the evaluation of induced changes in chondrocyte metabolism.
JoVE Bioengineering
Generation and Recovery of β-cell Spheroids From Step-growth PEG-peptide Hydrogels
The following protocol provides techniques for encapsulating pancreatic β-cells in step-growth PEG-peptide hydrogels formed by thiol-ene photo-click reactions. This material platform not only offers a cytocompatible microenvironment for cell encapsulation, but also permits user-controlled rapid recovery of cell structures formed within the hydrogels.
JoVE Bioengineering
Microfabricated Platforms for Mechanically Dynamic Cell Culture
1Department of Mechanical and Industrial Engineering, University of Toronto, 2Institute of Biomaterials and Biomedical Engineering, University of Toronto, 3Faculty of Dentistry, University of Toronto
In this protocol, we demonstrate the fabrication of a microactuator array of vertically displaced posts on which the technology is based, and how this base technology can be modified to conduct high-throughput mechanically dynamic cell culture in both two-dimensional and three-dimensional culture paradigms.
JoVE General
Cellular Encapsulation in 3D Hydrogels for Tissue Engineering
1Department of Bioengineering, University of Pennsylvania, 2Department of Bioengineering, University of Pennsylvania-School of Medicine
We present protocols for the 3-dimensional (3D) encapsulation of cells within synthetic hydrogels. The encapsulation procedure is outlined for two commonly used methods of crosslinking (michael-type addition and light-initiated free radical mechanisms), as well as a number of techniques for assessing encapsulated cell behavior.
JoVE General
PuraMatrix Encapsulation of Cancer Cells
1Wellman Center for Photomedicine Massachusetts General Hospital, Harvard Medical School, 2Thayer School of Engineering, Dartmouth College, 3Department of Dermatology, Harvard Medical School
This video demonstrates how to encapsulate and culture cancer cells in PuraMatrix, a commercially available self assembling peptide gel.
JoVE Bioengineering
Encapsulation of Cardiomyocytes in a Fibrin Hydrogel for Cardiac Tissue Engineering
Department of Biomedical Engineering, Tufts University
We describe the isolation of neonatal cardiomyocytes and the preparation of the cells for encapsulation in fibrin hydrogel constructs for tissue engineering. We describe methods for analyzing the tissue engineered myocardium after the culture period including active force generated upon electrical stimulation and cell viability and immunohistological staining.
JoVE Bioengineering
Cultivation of Human Neural Progenitor Cells in a 3-dimensional Self-assembling Peptide Hydrogel
Albrecht-Kossel-Institute for Neuroregeneration, University of Rostock
Here we describe the use of a self-assembling 3-dimensional scaffold to culture human neural progenitor cells. We present a protocol to release the cells from the scaffolds to be analysed subsequently e.g. by flow cytometry. This protocol might be adapted to other cell types to perform detailed mechanistically studies.
JoVE Editorial
March 2013: This Month in JoVE
1Department of Ophthalmology, Massachusetts Eye and Ear, 2JoVE Content Production
Here are some highlights from the March 2013 issue of Journal of Visualized Experiments (JoVE).
JoVE Clinical and Translational Medicine
Matrix-assisted Autologous Chondrocyte Transplantation for Remodeling and Repair of Chondral Defects in a Rabbit Model
1Department of Orthopaedic Sports Medicine, Klinikum rechts der Isar der Technischen Universität München, 2Department of Radiology, Klinikum rechts der Isar der Technischen Universität München, 3Institute of Experimental Oncology and Therapy Research, Klinikum rechts der Isar der Technischen Universität München, 4Department of Radiology, Uniklinik Köln
An experimental technique for the treatment of chondral defects in the rabbit's knee joint is described. The implantation of autologous chondrocytes seeded on a matrix is a well-accepted method for the remodeling and repair of articular cartilage lesions providing satisfying long-term results. Matrix-assisted autologous chondrocyte transplantation (MACT) offers a standardized and clinically established implantation method.
JoVE General
Fabrication and Use of MicroEnvironment microArrays (MEArrays)
1Life Science Division, Lawrence Berkeley National Laboratory, 2Department of Comparative Biochemistry, University of California, Berkeley
A combinatorial functional screening method for gaining insights into the impacts of the molecular composition of microenvironments on cellular functions is described. The method takes advantage of existing microarray-based technologies to generate arrays of defined combinatorial microenvironments that support cell adhesion and functional analysis.
JoVE Bioengineering
Engineering a Bilayered Hydrogel to Control ASC Differentiation
1Department of Extremity Trauma Research and Regenerative Medicine, United States Army Institute of Surgical Research, 2Department of Biomedical Engineering, The University of Texas at Austin
This protocol focuses on utilizing the inherent ability of stem cells to take cue from their surrounding extracellular matrix and be induced to differentiate into multiple phenotypes. This methods manuscript extends our description and characterization of a model utilizing a bilayered hydrogel, composed of PEG-fibrin and collagen, to simultaneously co-differentiate adipose-derived stem cells1.
JoVE General
Microfluidic Co-culture of Epithelial Cells and Bacteria for Investigating Soluble Signal-mediated Interactions
1McFerrin Department of Chemical Engineering, Texas A&M University, 2Department of Biomedical Engineering, Texas A&M University
This protocol describes a microfluidic co-culture model for simultaneous and localized culture of epithelial cells and bacteria. This model can be used for investigating the role of different soluble molecular signals on pathogenesis as well as screen the effectiveness of putative probiotic bacterial strains.
JoVE General
Assessing Neural Stem Cell Motility Using an Agarose Gel-based Microfluidic Device
1Biomedical Engineering Department, Cornell University, 2Neurosurgical Laboratory for Translational Stem Cell Research, Weill Cornell Brain Tumor Center, Weill Cornell Medical College of Cornell University, 3Cell Morphology Department, Instituto de Investigacion Principe Felipe, 4Department of Chemical and Biomolecular Engineering, Cornell University
We demonstrate that the over expression of epidermal growth factor receptors (EGFR) enhances the motility of neural stem cells(NSCs) using a novel agarose gel based microfluidic device. This technology can be readily adaptable to other mammalian cell systems where cell sources are scarce, such as human neural stem cells, and the turn around time is critical.
JoVE Bioengineering
Planar and Three-Dimensional Printing of Conductive Inks
1Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, 2Center for Micro- and Nanotechnology, Lawrence Livermore National Laboratory, 3Presently at the Interdisciplinary Center for Wide Band-gap Semiconductors, University Of California Santa Barbara
Planar and three-dimensional printing of conductive metallic inks is described. Our approach provides new avenues for fabricating printed electronic, optoelectronic, and biomedical devices in unusual layouts at the microscale.
JoVE Bioengineering
Procedure for Lung Engineering
1Department of Biomedical Engineering, Yale University, 2Department of Biomedical Engineering, School of Medicine, Duke University, 3Department of Anesthesia, Yale University
We have developed a decellularized lung extracellular matrix and novel biomimetic bioreactor that can be used to generate functional lung tissue. By seeding cells into the matrix and culturing in the bioreactor, we generate tissue that demonstrates effective gas exchange when transplanted in vivo for short periods of time.
JoVE General
Fabrication of Myogenic Engineered Tissue Constructs
1Department of Anesthesiology, Children's Hospital Boston and Harvard Medical School, 2Perioperative and Pain Medicine, Children's Hospital Boston and Harvard Medical School
Here, we demonstrate fabrication of collagen-based, tissue constructs containing skeletal myoblasts. These 3-D engineered constructs may be used to replace or repair tissues in vivo. For our purposes, we have designed these as an atrioventricular electrical conduit for the repair of complete heart block[1].
JoVE Clinical and Translational Medicine
Cecal Ligation Puncture Procedure
1Department of Microbiology and Immunology School of Medicine, Temple University, 2Department of Biochemistry, School of Medicine, Temple University
The mouse model of cecal ligation and puncture as a valuable tool for the study of human sepsis.
JoVE Immunology and Infection
The Use of Drip Flow and Rotating Disk Reactors for Staphylococcus aureus Biofilm Analysis
Molecular, Cellular, and Developmental Biology, University of Michigan
Protocols for utilizing open system flow biofilms with drip flow reactors and rotating disk reactors are presented in detail.
JoVE Bioengineering
Formulation of Diblock Polymeric Nanoparticles through Nanoprecipitation Technique
1Laboratory of Nano- and Translational Medicine, Department of Radiation Oncology, Lineberger Comprehensive Cancer Center, University of North Carolina School of Medicine, 2Carolina Center for Nanotechnology Excellence, University of North Carolina
This article describes a nanoprecipitation method to synthesize polymer-based nanoparticles using diblock co-polymers. We will discuss the synthesis of diblock co-polymers, the nanoprecipitation technique, and potential applications.
JoVE Bioengineering
Engineering Skeletal Muscle Tissues from Murine Myoblast Progenitor Cells and Application of Electrical Stimulation
Engineered muscle tissue has great potential in regenerative medicine, as disease model and also as an alternative source for meat. Here we describe the engineering of a muscle construct, in this case from mouse myoblast progenitor cells, and the stimulation by electrical pulses.
JoVE General
Culturing and Applications of Rotating Wall Vessel Bioreactor Derived 3D Epithelial Cell Models
Basic Medical Sciences, University of Arizona College of Medicine - Phoenix
A rotating cell culture system that allows epithelial cells to grow under physiological conditions resulting in 3-D cellular aggregate formation is described. The aggregates generated display in vivo-like characteristics not observed in conventional culture models and serve as a more accurate organotypic model system for a multitude of scientific investigations.
JoVE Bioengineering
Air Filter Devices Including Nonwoven Meshes of Electrospun Recombinant Spider Silk Proteins
Biomaterials Research Group, University of Bayreuth
Spider silk fibers display extraordinary mechanical properties. Engineered Araneus diadematus Fibroin 4 (eADF4) can be processed into nonwoven meshes using electrospinning. Here, the eADF4 nonwoven meshes are used to improve the performance of air filtering devices.
JoVE Clinical and Translational Medicine
Treatment of Osteochondral Defects in the Rabbit's Knee Joint by Implantation of Allogeneic Mesenchymal Stem Cells in Fibrin Clots
1Department of Orthopaedic Sports Medicine, Klinikum rechts der Isar der Technischen Universität München, 2Department of Radiology, Klinikum rechts der Isar der Technischen Universität München, 3Institute of Experimental Oncology and Therapy Research, Klinikum rechts der Isar der Technischen Universität München, 4Department of Radiology, Uniklinik Köln
An experimental technique for the treatment of osteochondral defects in the rabbit's knee joint is described. The implantation of allogeneic mesenchymal stem cells into osteochondral defects provides a promising development in the field of tissue engineering. The preparation of fibrin-cell-clots in vitro offers a standardized method for implantation.
JoVE Editorial
December 2012: This Month in JoVE
1Department of Ophthalmology, Massachusetts Eye and Ear, 2JoVE Content Production
Here are some highlights from the December 2012 Issue of Journal of Visualized Experiments (JoVE).
JoVE Clinical and Translational Medicine
Longitudinal Evaluation of Mouse Hind Limb Bone Loss After Spinal Cord Injury using Novel, in vivo, Methodology
A longitudinal examination of bone loss in the femurs and tibiae of adult mice was performed following spinal cord injury using sequential low-dose X-ray scans. Tibia bone loss was detected throughout the study, while bone loss in the femur was not detected until 40 days post injury.
JoVE Clinical and Translational Medicine
Processing of Primary Brain Tumor Tissue for Stem Cell Assays and Flow Sorting
Stem Cell and Cancer Research Institute, McMaster University
The identification of brain tumor initiating cells (BTICs), the rare cells within a heterogeneous tumor possessing stem cell properties, provides new insights into human brain tumor pathogenesis. We have refined specific culture conditions to enrich for BTICs, and we routinely use flow cytometry to further enrich these populations. Self-renewal assays and transcript analysis by single cell RT-PCR can subsequently be performed on these isolated cells.
JoVE Neuroscience
Reproducible Mouse Sciatic Nerve Crush and Subsequent Assessment of Regeneration by Whole Mount Muscle Analysis
Center for Neural Repair and Rehabilitation, Temple University
In this report we describe a method to crush mouse sciatic nerve. This method uses readily available hemostatic forceps and easily and reproducibly produces complete sciatic nerve crush. In addition, we describe a method to prepare muscle whole mounts suitable for analysis of nerve regeneration after sciatic nerve crush.
JoVE Chemistry
Origami Inspired Self-assembly of Patterned and Reconfigurable Particles
1Department of Chemical and Biomolecular Engineering, The Johns Hopkins University, 2Department of Chemistry, The Johns Hopkins University
We describe experimental details of the synthesis of patterned and reconfigurable particles from two dimensional (2D) precursors. This methodology can be used to create particles in a variety of shapes including polyhedra and grasping devices at length scales ranging from the micro to centimeter scale.
JoVE Clinical and Translational Medicine
Heterotypic Three-dimensional In Vitro Modeling of Stromal-Epithelial Interactions During Ovarian Cancer Initiation and Progression
1Department of Preventive Medicine, University of Southern California, 2Institute for Women's Health, University College London
We describe methodologies for establishing in vitro heterotypic three-dimensional models comprising ovarian fibroblasts and normal ovarian surface or ovarian cancer epithelial cells. We discuss the use of these models to study stromal-epithelial interactions that occur during ovarian cancer development.
More Results...
