1Department of Physics, Clemson University, 2Department of Pharmacology and Toxicology, East Carolina University, 3Department of Bioengineering, Clemson University, 4Center for Optical Materials Science and Engineering Technologies, Clemson University
Graphene offers potential as a coating material for biomedical implants. In this study we demonstrate a method for coating nitinol alloys with nanometer thick layers of graphene and determine how graphene may influence implant response.
Here are some highlights from the September 2011 Issue of Journal of Visualized Experiments (JoVE).
Autologous Endothelial Progenitor Cell-Seeding Technology and Biocompatibility Testing For Cardiovascular Devices in Large Animal Model
A method for seeding titanium blood-contacting biomaterials with autologous cells and testing biocompatibility is described. This method uses endothelial progenitor cells and titanium tubes, seeded within minutes of surgical implantation into porcine venae cavae. This technique is adaptable to many other implantable biomedical devices.
A Chitosan Based, Laser Activated Thin Film Surgical Adhesive, 'SurgiLux': Preparation and Demonstration
The fabrication of a novel, flexible thin film surgical adhesive from FDA approved ingredients, chitosan and indocyanine green is described. Bonding of this adhesive to collagenous tissue through a simple activation process with a low-powered infra-red laser is demonstrated.
Labeling hESCs and hMSCs with Iron Oxide Nanoparticles for Non-Invasive in vivo Tracking with MR Imaging
For the evaluation of new stem cell therapies it is important to non-invasively track the injected cells in vivo. This video will show you how to label human mesenchymal and embryonic stem cells with iron oxide based contrast agents in vivo for subsequent MR imaging in vivo.
A method for photo-encapsulation of cells in a crosslinked PEG hydrogel is described. Hypoxic signaling within encapsulated murine insulinoma (MIN6) aggregates is tracked using a fluorescent marker system. This system allows serial examination of cells within a hydrogel scaffold and correlation of hypoxic signaling with changes in cell phenotype.
Despite the outstanding mechanical and biochemical properties of spider silks, this material cannot be harvested in large quantities by conventional means. Here we describe an efficient strategy to spin artificial spider silk fibers, which is an important process for investigators studying spider silk production and their use as next-generation biomaterials.
1Laboratory of Biophysics and Surface Analysis, University of Nottingham, 2School of Molecular Medical Sciences, University of Nottingham, 3David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology
A description of the formation of a polymer microarray using an on-chip photopolymerization technique. The high throughput surface characterization using atomic force microscopy, water contact angle measurements, X-ray photoelectron spectroscopy and time of flight secondary ion mass spectrometry and a cell attachment assay is also described.
1Laboratory of Nano- and Translational Medicine, Department of Radiation Oncology, Lineberger Comprehensive Cancer Center, University of North Carolina School of Medicine, 2Carolina Center for Nanotechnology Excellence, University of North Carolina
This article describes a nanoprecipitation method to synthesize polymer-based nanoparticles using diblock co-polymers. We will discuss the synthesis of diblock co-polymers, the nanoprecipitation technique, and potential applications.
Antigens Protected Functional Red Blood Cells By The Membrane Grafting Of Compact Hyperbranched Polyglycerols
1Centre for Blood Research, University of British Columbia, 2Department of Pathology and Laboratory Medicine, University of British Columbia, 3Canadian Blood Services, University of British Columbia, 4Department of Chemistry, Life Sciences Centre, University of British Columbia
The cell membrane modification of red blood cells (RBCs) with hyperbranched polyglycerol (HPG) is presented. Modified RBCs were characterized by aqueous two phase partitioning, osmotic fragility and complement mediated lysis. The camouflage of surface proteins and antigens was evaluated using the flow cytometry and Micro Typing System (MTS) blood phenotyping cards.
Synthesis and Functionalization of Nitrogen-doped Carbon Nanotube Cups with Gold Nanoparticles as Cork Stoppers
We discussed the synthesis of individual graphitic nanocups using a series of techniques including chemical vapor deposition, acid oxidation and probe-tip sonication. By citrate reduction of HAuCl4, the graphitic nanocups were effectively corked with gold nanoparticles due to the chemically reactive edges of the cups.
1Department of Orthopaedics, The Warren Alpert Brown Medical School of Brown University and the Rhode Island Hospital, 2Center for Restorative and Regenerative Medicine, VA Medical Center, Providence, RI, 3University of Texas Southwestern Medical Center
We designed a novel mechanical loading bioreactor that can apply uniaxial or biaxial mechanical strain to a cartilage biocomposite prior to transplantation into an articular cartilage defect.
A major hurdle in current stem cell therapies is determining the most effective method to deliver these cells to host tissues. Here, we describe a chitosan-based delivery method that is efficient and simple in approach, while allowing adipose-derived stem cells to maintain their multipotency.
We demonstrate protocols for manufacturing and automating elastomeric polydimethylsiloxane (PDMS)-based microvalve arrays that need no extra energy to close and feature photolithographically defined precise volumes. A parallel subnanoliter-volume mixer and an integrated microfluidic perfusion system are presented.
This protocol focuses on utilizing the inherent ability of stem cells to take cue from their surrounding extracellular matrix and be induced to differentiate into multiple phenotypes. This methods manuscript extends our description and characterization of a model utilizing a bilayered hydrogel, composed of PEG-fibrin and collagen, to simultaneously co-differentiate adipose-derived stem cells1.
Combinatorial Synthesis of and High-throughput Protein Release from Polymer Film and Nanoparticle Libraries
This method describes the combinatorial synthesis of biodegradable polyanhydride film and nanoparticle libraries and the high-throughput detection of protein release from these libraries.
1Department of Chemical and Biological Engineering, Illinois Institute of Technology, 2Department of Biomedical Engineering, Illinois Institute of Technology, 3Department of Biomedical Engineering, University of California at Irvine, 4Wake Forest Institute for Regenerative Medicine and Department of Biomedical Engineering, Wake Forest University Health Sciences, 5Research Service, Hines Veterans Administration Hospital
In the following sections, we outline procedures for the preparation of alginate microspheres for use in biomedical applications. We specifically illustrate a technique for creating multilayered alginate microspheres for the dual purpose of cell and protein encapsulation as a potential treatment for type 1 diabetes.
Fluorescent nanoparticles produced in our lab are used for imaging ion concentrations and ion fluxes in biological systems such as cells during signaling and interstitial fluid during physiological homeostasis.
Plant viral nanoparticles (VNPs) are promising platforms for applications in biomedicine. Here, we describe the procedures for plant VNP propagation, purification, characterization, and bioconjugation. Finally, we show the application of VNPs for tumor homing and imaging using a mouse xenograft model and fluorescence imaging.
A unique tissue engineering method was developed to elongate numerous nerve fibers in culture by recapitulating axon stretch growth; a form of nervous system growth whereby nerves elongate in conjunction with growth of the enlarging body.
1Department of Anatomy and Structural Biology, Albert Einstein College of Medicine - Yeshiva University, 2Gruss Lipper Biophotonics Center, Albert Einstein College of Medicine - Yeshiva University, 3Hubrecht Institute-KNAW and University Medical Center Utrecht
Intravital photoswitching and tracking of Dendra2-labeled tumor cells through the Mammary Imaging Window is a technique which allows us to image the metastatic behavior of tumor cells in chosen tumor microenvironments over a timescale of days.
In this protocol we demonstrate how to fabricate and condition tetrodes for use with a micro-drive array, which was designed for chronic electrophysiological recordings in rats. In addition, we illustrate the final stages of micro-drive array construction, which includes installing ground wires and a protective cone.
Silk films are a novel class of biomaterials readily customizable for an array of biomedical applications. The presented silk film culture system is highly adaptable to a variety of in vitro analyses. This system represents a biomaterial design platform offering in vitro optimization before direct translation to in vivo models.
Evaluation of Biomaterials for Bladder Augmentation using Cystometric Analyses in Various Rodent Models
Surgical stages of bladder augmentation are described using 3-D scaffolds in murine and rat models. To test the efficacy of biomaterial configurations for use in bladder augmentation, techniques for both awake and anesthetized cystometry are presented.
Parallel-plate Flow Chamber and Continuous Flow Circuit to Evaluate Endothelial Progenitor Cells under Laminar Flow Shear Stress
1Department of Surgery, Duke University Medical Center, 2Department of Biomedical Engineering, Duke University, 3School of Medicine, University of Pennsylvania, 4Department of Medicine, Division of Cardiology, Duke University Medical Center
We are describing a method to subject adherent cells to laminar flow shear stress in a sterile continuous flow circuit. The cells' adhesion, morphology can be studied through the transparent chamber, samples obtained from the circuit for metabolite analysis and cells harvested after shear exposure for future experiments or culture.
1JoVE Content Production, 2Department of Ophthalmology, Massachusetts Eye and Ear
Historically, JoVE, The Journal of Visualized Experiments, has focused primarily on biomedical research and has developed subsections for Bioengineering, Clinical and Translational Medicine, Immunology and Infection, and Neuroscience. This July, JoVE launches its Applied Physics section, which includes a range of content from Plasma Physics to Materials Science. We begin the new section with a notable article from Purdue University, where researchers in the Center for Laser-Based Manufacturing are studying.
Here are some highlights from the April 2012 Issue of Journal of Visualized Experiments (JoVE).
1Fischell Department of Bioengineering, University of Maryland, 2Institute for Bioscience and Biotechnology Research, University of Maryland, 3Department of Materials Science and Engineering, University of Maryland
This article describes a biofabrication approach: deposition of stimuli-responsive polysaccharides in the presence of biased electrodes to create biocompatible films which can be functionalized with cells or proteins. We demonstrate a bench-top strategy for the generation of the films as well as their basic uses for creating interactive biofunctionalized surfaces for lab-on-a-chip applications.