Silk films are a novel class of biomaterials readily customizable for an array of biomedical applications. The presented silk film culture system is highly adaptable to a variety of in vitro analyses. This system represents a biomaterial design platform offering in vitro optimization before direct translation to in vivo models.
Density Gradient Multilayered Polymerization (DGMP): A Novel Technique for Creating Multi-compartment, Customizable Scaffolds for Tissue Engineering
1Skaggs School of Pharmacy and Pharmaceutical Sciences, University of California, San Diego, 2Biomedical Sciences Program, University of California, San Diego, 3Department of Bioengineering, University of California, San Diego
Here we describe a unique strategy for creating biocompatible, layered matrices with continuous interfaces between distinct layers for tissue engineering. Such a scaffold could provide an ideal customizable environment to modulate cell behavior by various biological, chemical or mechanical cues
Methods for preparing an injectable matrix gel from decellularized tissue and injecting it into rat myocardium in vivo are described.
This work details the preparation of 3D fibrin scaffolds for culturing and differentiating plutipotent stem cells. Such scaffolds can be used to screen the effects of various biological compounds on stem cell behavior as well as modified to contain drug delivery systems.
A novel approach that allows the high-resolution analysis of cancer cell interactions with exogenous hyaluronic acid (HA) is described. Patterned surfaces are fabricated by combining carbodiimide chemistry and microcontact printing.
In this protocol, we demonstrate the fabrication of a microactuator array of vertically displaced posts on which the technology is based, and how this base technology can be modified to conduct high-throughput mechanically dynamic cell culture in both two-dimensional and three-dimensional culture paradigms.
Alginate Microcapsule as a 3D Platform for Propagation and Differentiation of Human Embryonic Stem Cells (hESC) to Different Lineages
1Stem Cell Lab, School of Psychiatry, Faculty of Medicine, The University of New South Wales, 2Siriraj Center of Excellence for Stem cell Research, Faculty of Medicine Siriraj Hospital, Mahidol University, 3Neuropsychiatric Institute, Prince of Wales Hospital
We have optimized a microencapsulation technique as an effective 3D platform for propagation and differentiation of embryonic stem cells to endoderm and dopaminergic (DA) neurons. It also provides an opportunity for immune-isolation of cells from the host during transplantation. This platform can be adapted for other cell types.
1McGowan Institute for Regenerative Medicine, 2Department of Bioengineering, University of Pittsburgh, 3Department of Cardiothoracic Surgery, Children's Hospital of Pittsburgh of UPMC, 4Department of Surgery, University of Pittsburgh
A method to rapidly and completely remove cellular components from an intact porcine heart through retrograde perfusion is described. This method yields a site specific cardiac extracellular matrix scaffold which has the potential for use in multiple clinical applications.
The following protocol provides techniques for encapsulating pancreatic β-cells in step-growth PEG-peptide hydrogels formed by thiol-ene photo-click reactions. This material platform not only offers a cytocompatible microenvironment for cell encapsulation, but also permits user-controlled rapid recovery of cell structures formed within the hydrogels.
1Laboratory of Biophysics and Surface Analysis, University of Nottingham, 2School of Molecular Medical Sciences, University of Nottingham, 3David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology
A description of the formation of a polymer microarray using an on-chip photopolymerization technique. The high throughput surface characterization using atomic force microscopy, water contact angle measurements, X-ray photoelectron spectroscopy and time of flight secondary ion mass spectrometry and a cell attachment assay is also described.
Autologous Endothelial Progenitor Cell-Seeding Technology and Biocompatibility Testing For Cardiovascular Devices in Large Animal Model
A method for seeding titanium blood-contacting biomaterials with autologous cells and testing biocompatibility is described. This method uses endothelial progenitor cells and titanium tubes, seeded within minutes of surgical implantation into porcine venae cavae. This technique is adaptable to many other implantable biomedical devices.
Perfusion decellularization is a novel technique to produce whole liver scaffolds that retains the organ's extracellular matrix composition and microarchitecture. Herein, the method of preparing whole organ scaffolds using perfusion decellularization and subsequent repopulation with hepatocytes is described. Functional and transplantable liver grafts can be generated using this technique.
The process of electrospinning polymers for tissue engineering and cell culture is addressed in this article. Specifically, the electrospinning of photoreactive macromers with additional processing capabilities of photopatterning and multi-polymer electrospinning is described.
Combinatorial Synthesis of and High-throughput Protein Release from Polymer Film and Nanoparticle Libraries
This method describes the combinatorial synthesis of biodegradable polyanhydride film and nanoparticle libraries and the high-throughput detection of protein release from these libraries.
Harvesting Murine Alveolar Macrophages and Evaluating Cellular Activation Induced by Polyanhydride Nanoparticles
Herein, we describe protocols for harvesting murine alveolar macrophages, which are resident innate immune cells in the lung, and examining their activation in response to co-culture with polyanhydride nanoparticles.
In this article, a high throughput method is presented for the synthesis of oligosaccharides and their attachment to the surface of polyanhydride nanoparticles for further use in targeting specific receptors on antigen presenting cells.
The generation of aligned myocardial tissue is a key requirement for adapting the recent advances in stem cell biology to clinically useful purposes. Herein we describe a microcontact printing approach for the precise control of cell shape and function. Using highly purified populations of embryonic stem cell derived cardiac progenitors, we then generate anisotropic functional myocardial tissue.
A Method for Ovarian Follicle Encapsulation and Culture in a Proteolytically Degradable 3 Dimensional System
1Institute for BioNanotechnology in Advanced Medicine, Northwestern University, 2Department of Obstetrics and Gynecology, Northwestern University, Feinberg School of Medicine, 3Center for Reproductive Research, Northwestern University, 4The Robert H. Lurie Comprehensive Cancer Center, Northwestern University, 5Department of Chemical and Biological Engineering, Northwestern University
A new method for ovarian follicle encapsulation in a 3D fibrin-alginate interpenetrating network is described. This system combines structural support with proteolytic degradation to support the development of immature follicles to produce mature oocytes. This method may be applied to culture cell aggregates to maintain cell-cell contacts without limiting expansion.
Electrospun scaffolds can be processed post production for tissue engineering applications. Here we describe methods for spinning complex scaffolds (by consecutive spinning), for making thicker scaffolds (by multi-layering using heat or vapour annealing), for achieving sterility (aseptic production or sterilisation post production) and for achieving appropriate biomechanical properties.
Antigens Protected Functional Red Blood Cells By The Membrane Grafting Of Compact Hyperbranched Polyglycerols
1Centre for Blood Research, University of British Columbia, 2Department of Pathology and Laboratory Medicine, University of British Columbia, 3Canadian Blood Services, University of British Columbia, 4Department of Chemistry, Life Sciences Centre, University of British Columbia
The cell membrane modification of red blood cells (RBCs) with hyperbranched polyglycerol (HPG) is presented. Modified RBCs were characterized by aqueous two phase partitioning, osmotic fragility and complement mediated lysis. The camouflage of surface proteins and antigens was evaluated using the flow cytometry and Micro Typing System (MTS) blood phenotyping cards.
Evaluation of Polymeric Gene Delivery Nanoparticles by Nanoparticle Tracking Analysis and High-throughput Flow Cytometry
1Biomedical Engineering Department, Johns Hopkins University School of Medicine, 2Translational Tissue Engineering Center, Johns Hopkins University School of Medicine, 3Wilmer Eye Institute, Johns Hopkins University School of Medicine, 4Institute for Nanobiotechnology, Johns Hopkins University School of Medicine
A protocol for nanoparticle tracking analysis (NTA) and high-throughput flow cytometry to evaluate polymeric gene delivery nanoparticles is described. NTA is utilized to characterize the nanoparticle particle size distribution and the plasmid per particle distribution. High-throughput flow cytometry enables quantitative transfection efficacy evaluation for a library of gene delivery biomaterials.
A 3D culture system for hematopoiesis is described using human cord blood and leukemic bone marrow cells. The method is based on the use of a porous synthetic polyurethane scaffold coated with extracellular matrix proteins. This scaffold is adaptable to accommodate a wide range of cells.
Directed Cellular Self-Assembly to Fabricate Cell-Derived Tissue Rings for Biomechanical Analysis and Tissue Engineering
This article outlines a versatile method to create cell-derived tissue rings by cellular self-assembly. Smooth muscle cells seeded into ring-shaped agarose wells aggregate and contract to form robust three-dimensional (3D) tissues within 7 days. Millimeter-scale tissue rings are conducive to mechanical testing and serve as building blocks for tissue assembly.
Repair of a Critical-sized Calvarial Defect Model Using Adipose-derived Stromal Cells Harvested from Lipoaspirate
1Department of Surgery, Stanford University, 2Department of Surgery, Duke University, 3Department of Surgery, Saint Joseph Mercy Hospital, 4School of Medicine, University of California, San Francisco, 5School of Dentistry, University of California, Los Angeles
This protocol describes the isolation of adipose-derived stromal cells from lipoaspirate and the creation of a 4 mm critical-sized calvarial defect to evaluate skeletal regeneration.
Evaluation of Biomaterials for Bladder Augmentation using Cystometric Analyses in Various Rodent Models
Surgical stages of bladder augmentation are described using 3-D scaffolds in murine and rat models. To test the efficacy of biomaterial configurations for use in bladder augmentation, techniques for both awake and anesthetized cystometry are presented.
Matrix-assisted Autologous Chondrocyte Transplantation for Remodeling and Repair of Chondral Defects in a Rabbit Model
1Department of Orthopaedic Sports Medicine, Klinikum rechts der Isar der Technischen Universität München, 2Department of Radiology, Klinikum rechts der Isar der Technischen Universität München, 3Institute of Experimental Oncology and Therapy Research, Klinikum rechts der Isar der Technischen Universität München, 4Department of Radiology, Uniklinik Köln
An experimental technique for the treatment of chondral defects in the rabbit's knee joint is described. The implantation of autologous chondrocytes seeded on a matrix is a well-accepted method for the remodeling and repair of articular cartilage lesions providing satisfying long-term results. Matrix-assisted autologous chondrocyte transplantation (MACT) offers a standardized and clinically established implantation method.
We demonstrate a simple method for placing cells at desired locations on a substrate. This method patterns cells by flipping a silicone chip containing microwells filled with cells onto the substrate. This method provides a new way to modulate diffusible and juxtacrine signaling between cells.
1Department of Chemical and Biological Engineering, Illinois Institute of Technology, 2Department of Biomedical Engineering, Illinois Institute of Technology, 3Department of Biomedical Engineering, University of California at Irvine, 4Wake Forest Institute for Regenerative Medicine and Department of Biomedical Engineering, Wake Forest University Health Sciences, 5Research Service, Hines Veterans Administration Hospital
In the following sections, we outline procedures for the preparation of alginate microspheres for use in biomedical applications. We specifically illustrate a technique for creating multilayered alginate microspheres for the dual purpose of cell and protein encapsulation as a potential treatment for type 1 diabetes.
The umbilical cords are used to isolate smooth muscle cells by different ways. In this work we used the enzymatic treatment to isolated smooth muscle cells.
Fabrication of Micropatterned Hydrogels for Neural Culture Systems using Dynamic Mask Projection Photolithography
Simple techniques are described for the rapid production of microfabricated neural culture systems using a digital micromirror device for dynamic mask projection lithography on regular cell culture substrates. These culture systems may be more representative of natural biological architecture, and the techniques described could be adapted for numerous applications.
A versatile plasma lithography technique has been developed to generate stable surface patterns for guiding cellular attachment. This technique can be applied to create cell networks including those that mimic natural tissues and has been used for studying several, distinct cell types.
1Department of Physics, Clemson University, 2Department of Pharmacology and Toxicology, East Carolina University, 3Department of Bioengineering, Clemson University, 4Center for Optical Materials Science and Engineering Technologies, Clemson University
Graphene offers potential as a coating material for biomedical implants. In this study we demonstrate a method for coating nitinol alloys with nanometer thick layers of graphene and determine how graphene may influence implant response.
Culture of normal cells in their three-dimensional context represents an alternative method to study early events required for cellular transformation and tumorigenesis. This method is used to grow normal ovarian and oviductal cells to study early events in ovarian cancer formation.
1Department of Ophthalmology, Massachusetts Eye and Ear, 2JoVE Content Production
Here are some highlights from the May 2013 Issue of Journal of Visualized Experiments (JoVE).
A method for developing cell culture substrates with the ability to change topography during culture is described. The method makes use of smart materials known as shape memory polymers that have the ability to memorize a permanent shape. This concept is adaptable to a wide range of materials and applications.
Elastomeric PGS scaffolds with vascular smooth muscle cells cultured in a pulsatile flow bioreactor may lead to promising small-diameter arterial constructs with native ECM production in a relatively short culture period.
Here we describe the use of a self-assembling 3-dimensional scaffold to culture human neural progenitor cells. We present a protocol to release the cells from the scaffolds to be analysed subsequently e.g. by flow cytometry. This protocol might be adapted to other cell types to perform detailed mechanistically studies.
This protocol focuses on utilizing the inherent ability of stem cells to take cue from their surrounding extracellular matrix and be induced to differentiate into multiple phenotypes. This methods manuscript extends our description and characterization of a model utilizing a bilayered hydrogel, composed of PEG-fibrin and collagen, to simultaneously co-differentiate adipose-derived stem cells1.
Here are some highlights from the July 2011 Issue of Journal of Visualized Experiments (JoVE).
Here are some highlights from the April 2012 Issue of Journal of Visualized Experiments (JoVE).
1JoVE Content Production, 2Department of Ophthalmology, Massachusetts Eye and Ear
Historically, JoVE, The Journal of Visualized Experiments, has focused primarily on biomedical research and has developed subsections for Bioengineering, Clinical and Translational Medicine, Immunology and Infection, and Neuroscience. This July, JoVE launches its Applied Physics section, which includes a range of content from Plasma Physics to Materials Science. We begin the new section with a notable article from Purdue University, where researchers in the Center for Laser-Based Manufacturing are studying.
Correlative Light and Electron Microscopy (CLEM) as a Tool to Visualize Microinjected Molecules and their Eukaryotic Sub-cellular Targets
The CLEM technique has been adapted to analyze ultrastructural morphology of membranes, organelles, and subcellular structures affected by microinjected molecules. This method combines the powerful techniques of micromanipulation/microinjection, confocal fluorescent microscopy, and electron microscopy to allow millimeter to multi-nanometer resolution. This technique is amenable to a wide variety of applications.
We present protocols for the 3-dimensional (3D) encapsulation of cells within synthetic hydrogels. The encapsulation procedure is outlined for two commonly used methods of crosslinking (michael-type addition and light-initiated free radical mechanisms), as well as a number of techniques for assessing encapsulated cell behavior.
1Institute of Biomaterials and Biomedical Engineering / Department of Chemical Engineering and Applied Chemistry, University of Toronto, 2Institute of Biomaterials and Biomedical Engineering, University of Toronto
Creation of micro-tissues using cylindrical collagen gels, called modules, that contain embedded cells and which surface is coated with endothelial cells.
Herein is described the procedure implemented in the Caffrey Membrane Structural and Functional Biology Group to set up manually crystallization trials of membrane proteins in lipidic mesophases.
An efficient approach for preparing nanofibers decorated with functional groups capable of specifically interacting with proteins is described. The approach first requires the preparation of a polymer functionalized with the appropriate functional group. The functional polymer is fabricated into nanofibers by electrospinning. The effectiveness of the binding of the nanofibers with a protein is studied by confocal microscopy.
1Department of Veteran Affairs, 2Department of Bioengineering, University of Utah, 3Scientific Computing and Imaging Institute , University of Utah, 4Department of Physical Medicine and Rehabilitation, University of Utah, 5Department of Orthopaedics, University of Utah
There is a need to develop alternative prosthesis attachment due to limb loss attributed to vascular occlusive diseases and trauma. The goal of the work is to introduce an osseointegrated intelligent implant design system to increase skeletal fixation and reduce periprosthetic infection rates for patients needing osseointegrated technology.
The Culture of Primary Motor and Sensory Neurons in Defined Media on Electrospun Poly-L-lactide Nanofiber Scaffolds
1Department of Biomedical Engineering, University of Michigan, 2State Key Laboratory of Bioelectronics, Southeast University, 3Department of Neurology, University of Michigan, 4Geriatric Research, Education and Clinical Center, Veterans Affairs Ann Arbor Health System
Aligned electrospun fibers direct the growth of neurons in vitro and are a potential component of nerve regeneration scaffolds. We describe a procedure for preparing electrospun fiber substrates and the serum-free culture of primary rat E15 sensory (DRG) and motor neurons. Visualization of neurons by immunocytochemistry is also included.
A description of the methods used to convert an HP DeskJet 500 printer into a bioprinter. The printer is capable of processing living cells, which causes transient pores in the membrane. These pores can be utilized to incorporate small molecules, including fluorescent G-actin, into the printed cells.
Solubilization and Bio-conjugation of Quantum Dots and Bacterial Toxicity Assays by Growth Curve and Plate Count
Nanoparticles such as semiconductor quantum dots (QDs) can be used to create photoactivatable agents for anti-microbial or anti-cancer applications. This technique shows how to water-solubilize cadmium telluride (CdTe) QDs, conjugate them to an antibiotic, and perform a bacterial inhibition assay based upon growth curves and plate count.