JoVE General
Fabrication and Operation of an Oxygen Insert for Adherent Cellular Cultures
Bioengineering, University of Illinois
Fabrication and validation of an add-on platform that offers enhanced control over the spatial and temporal oxygenation in a 6-well plate. The device is adaptable to a number of culture systems and can be used to investigate the effects of oxygen on wound healing.
JoVE Bioengineering
Microfluidic Mixers for Studying Protein Folding
1Department of Physics and Astronomy, Michigan State University, 2Department of Mechanical Engineering, Hong Kong University of Science and Technology, 3Center for Biophotonics, University of California, Davis
In this work we explain the fabrication and use of a microfluidic mixer capable of mixing two solutions in ~8 μs. We also demonstrate the use of these mixers with spectroscopic detection using UV fluorescence and fluorescence resonance energy transfer (FRET).
JoVE General
Microfluidic Chips Controlled with Elastomeric Microvalve Arrays
Dept. of Bioengineering, University of Washington
We demonstrate protocols for manufacturing and automating elastomeric polydimethylsiloxane (PDMS)-based microvalve arrays that need no extra energy to close and feature photolithographically defined precise volumes. A parallel subnanoliter-volume mixer and an integrated microfluidic perfusion system are presented.
JoVE Bioengineering
Microfluidic Chip Fabrication and Method to Detect Influenza
1Department of Mechanical Engineering, Boston University, 2Department of Biomedical Engineering, Boston University
An integrated microfluidic thermoplastic chip has been developed for use as a molecular diagnostic. The chip performs nucleic acid extraction, reverse transcriptase, and PCR. Methods for fabricating and running the chip are described.
JoVE General
A Multi-Parametric Islet Perifusion System within a Microfluidic Perifusion Device
1Department of Surgery, University of Illinois, Chicago, 2Department of Bioengineering, University of Illinois, Chicago
A microfluidic islet perifusion device was developed for the assessment of dynamic insulin secretion of multiple islets and simultaneous fluorescence imaging of calcium influx and mitochondrial potential changes.
JoVE General
Automated Microfluidic Blood Lysis Protocol for Enrichment of Circulating Nucleated Cells
1Department of Mechanical Engineering, University of Louisville, 2Department of Bioengineering, University of Louisville
An automated microfluidic device was developed for circulating nucleated cell enrichment from peripheral blood via erythrocyte lysis that ensures isolation of high quality sample without cell loss.
JoVE General
Brain Slice Stimulation Using a Microfluidic Network and Standard Perfusion Chamber
1Dept. of Bioengineering, University of Illinois, Chicago, 2Department of Anatomy and Cell Biology, University of Illinois, Chicago
We demonstrate fabrication of a simple microfluidic device that can be integrated with standard electrophysiology setups to expose microscale surfaces of a brain slice in a well controlled manner to different neurotransmitters.
JoVE Bioengineering
Separating Beads and Cells in Multi-channel Microfluidic Devices Using Dielectrophoresis and Laminar Flow
1Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, 2Micro and Nanotechnology Lab, University of Illinois at Urbana-Champaign, 3Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 4Bioengineering, University of Illinois at Urbana-Champaign
Dielectrophoresis (DEP) is an effective method to manipulate cells. Printed circuit boards (PCB) can provide inexpensive, reusable and effective electrodes for contact-free cell manipulation within microfluidic devices. By combining PDMS-based microfluidic channels with coverslips on PCBs, we demonstrate bead and cell manipulation and separation within multichannel microfluidic devices.
JoVE General
A Gradient-generating Microfluidic Device for Cell Biology
We describe a protocol for the microfabrication of the gradient-generating microfluidic device that can generate spatial and temporal gradients in well-defined microenvironment. In this approach, the gradient-generating microfluidic device can be used to study directed cell migration, embryogenesis, wound healing, and cancer metastasis.
JoVE Bioengineering
Fluorescence detection methods for microfluidic droplet platforms
1Department of Chemistry, Imperial College London, 2Department of Biochemistry, Protein Chip Research Center, Chungbuk National University, 3Department of Chemistry and Applied Biosciences, Institute for Chemical and Bioengineering, ETH Zurich
Droplet-based microfluidic platforms are promising candidates for high throughput experimentation since they are able to generate picoliter, self-compartmentalized vessels inexpensively at kHz rates. Through integration with fast, sensitive and high resolution fluorescence spectroscopic methods, the large amounts of information generated within these systems can be efficiently extracted, harnessed and utilized.
JoVE General
High Speed Droplet-based Delivery System for Passive Pumping in Microfluidic Devices
1Materials Science Program, University of Wisconsin-Madison, 2Department of Biomedical Engineering, University of Wisconsin-Madison
A novel microfluidic system has been developed using the phenomenon of passive pumping and a user controlled fluid delivery system. This microfluidic system has the potential to be used in a wide variety of biological applications given its low cost, ease of use, volumetric precision, high speed, repeatability and automation.
JoVE General
Automated System for Single Molecule Fluorescence Measurements of Surface-immobilized Biomolecules
1Physics Department, Boston University, 2Department of Biomedical Engineering, Boston University
In this article we describe how we obtain FRET traces from individual DNA molecules immobilized to a surface using an automated scanning confocal microscope.
JoVE General
Combining QD-FRET and Microfluidics to Monitor DNA Nanocomplex Self-Assembly in Real-Time
1Mechanical Engineering, Johns Hopkins University, 2Biomedical Engineering, Duke University, 3Biomedical Engineering, Johns Hopkins University
We present a novel and powerful integration of nanophotonics (QD-FRET) and microfluidics to investigate the formation of polyelectrolyte polyplexes, which is expected to provide better control and synthesis of uniform and customizable polyplexes for future nucleic acid-based therapeutics.
JoVE Bioengineering
A Microfluidic Device for Studying Multiple Distinct Strains
We present a simple method to produce microfluidic devices capable of applying similar dynamic conditions to multiple distinct strains, without the need for a clean room or soft lithography.
JoVE Bioengineering
Simple Microfluidic Devices for in vivo Imaging of C. elegans, Drosophila and Zebrafish
1Neurobiology, NCBS-TIFR, 2Department of Biological Sciences, TIFR
A simple microfluidic device has been developed to perform anesthetic free in vivo imaging of C. elegans, intact Drosophila larvae and zebrafish larvae. The device utilizes a deformable PDMS membrane to immobilize these model organisms in order to perform time lapse imaging of numerous processes such as heart beat, cell division and sub-cellular neuronal transport. We demonstrate the use of this device and show examples of different types of data collected from different model systems.
JoVE General
A Microfluidic Device with Groove Patterns for Studying Cellular Behavior
We describe a protocol for the fabrication of microfluidic devices that can enable cell capture and culture. In this approach patterned microstructures such as grooves within microfluidic channels are used to create low shear stress regions within which cell can dock.
JoVE General
A Microfluidic Device for Quantifying Bacterial Chemotaxis in Stable Concentration Gradients
1McFerrin Department of Chemical Engineering, Texas A&M University, 2Department of Biology, Texas A&M University, 3Department of Biomedical Engineering, Texas A&M University
This protocol describes the development of a microfluidic device for investigating bacterial chemotaxis in stable concentration gradients of chemoeffectors.
JoVE Bioengineering
Increasing cDNA Yields from Single-cell Quantities of mRNA in Standard Laboratory Reverse Transcriptase Reactions using Acoustic Microstreaming
1Florey Neuroscience Institutes and Centre for Neuroscience, University of Melbourne, 2Fluid Dynamics Group, CSIRO Materials Science and Engineering, 3Swinburne University of Technology, Faculty of Engineering and Industrial Sciences
We describe a novel method for increasing cDNA yield from single-cell quantities of mRNA in otherwise standard laboratory reverse transcription reactions. The novelty resides in the use of a micromixer, which utilizes the phenomenon of acoustic microstreaming, to mix fluids at microliter scales more effectively than shaking, vortexing or trituration.
JoVE General
A Multi-compartment CNS Neuron-glia Co-culture Microfluidic Platform
1Department of Electrical and Computer Engineering, Texas A&M University (TAMU), 2Department of Veterinary Integrative Biosciences, Texas A&M University (TAMU)
We developed a novel multi-compartment neuron co-culture microsystem platform for in vitro CNS axon-glia interaction research. The platform is capable of conducting up to six independent experiments in parallel and was fabricated using a newly developed macro/micro hybrid fabrication method.
JoVE General
Digital Microfluidics for Automated Proteomic Processing
1Department of Chemistry, University of Toronto, 2Donnelly Centre for Cellular and Biomolecular Research, 3Institute for Biomaterials and Biomedical Engineering, University of Toronto
Digital Microfluidics is a technique characterized by the manipulation of discrete droplets (~nL - mL) on an array of electrodes by the application of electrical fields. It is well-suited for carrying out rapid, sequential, miniaturized automated biochemical assays. Here, we report a platform capable of automating several proteomic processing steps.
JoVE Bioengineering
On-chip Isotachophoresis for Separation of Ions and Purification of Nucleic Acids
Mechanical Engineering, Stanford University
Isotachophoresis (ITP) is a robust electrokinetic separation and preconcentration technique with applications ranging from toxin detection to sample preparation. We review the physical principles of ITP and the methodology of applying this technique to two specific example applications: separation and detection of small molecules and purification of nucleic acids from cell culture lysate.
JoVE Applied Physics
Synthesis and Operation of Fluorescent-core Microcavities for Refractometric Sensing
Department of Physics, University of Alberta
Fluorescent-core microcavity sensors employ a high-index quantum-dot coating in the channel of silica microcapillaries. Changes in the refractive index of fluids pumped into the capillary channel cause shifts in the microcavity fluorescence spectrum that can be used to analyze the channel medium.
JoVE Bioengineering
Fabrication of Micro-tissues using Modules of Collagen Gel Containing Cells
1Institute of Biomaterials and Biomedical Engineering / Department of Chemical Engineering and Applied Chemistry, University of Toronto, 2Institute of Biomaterials and Biomedical Engineering, University of Toronto
Creation of micro-tissues using cylindrical collagen gels, called modules, that contain embedded cells and which surface is coated with endothelial cells.
JoVE General
Method for Measurement of Viral Fusion Kinetics at the Single Particle Level
1Department of Biological Chemistry and Molecular Pharmacology, Harvard Medical School, 2Howard Hughes Medical Institute, Harvard Medical School
We present an in vitro, two-color fluorescence assay to visualize the fusion of single virus particles with a fluid target bilayer. By labeling viral particles with fluorophores that differentially stain the viral membrane and its interior, we are able to monitor the kinetics of hemifusion and pore formation.
JoVE Neuroscience
In vivo Neuronal Calcium Imaging in C. elegans
1Department of Physiology and Biophysics, Boston University School of Medicine, 2Boston University Photonics Center
With its small transparent body, well-documented neuroanatomy and a host of amenable genetic techniques and reagents, C. elegans makes an ideal model organism for in vivo neuronal imaging using relatively simple, low-cost techniques. Here we describe single neuron imaging within intact adult animals using genetically encoded fluorescent calcium indicators.
JoVE General
Using an Automated Cell Counter to Simplify Gene Expression Studies: siRNA Knockdown of IL-4 Dependent Gene Expression in Namalwa Cells
Gene Expression Division, Bio-Rad Laboratories
This procedure describes a quick and easy workflow to introduce siRNA into difficult to transfect cell lines and follow gene expression by real-time PCR. Use of an automated cell counter, multi-well electroporation plate, and automated electrophoresis station provide quick and reliable results without the need for expensive robotic handling.
JoVE General
Automated Hydrophobic Interaction Chromatography Column Selection for Use in Protein Purification
1College of Nursing, Interdisciplinary Life Sciences Research Laboratory, Seattle University, 2College of Science and Engineering, Interdisciplinary Life Sciences Research Laboratory, Seattle University
An automated method for identifying suitable hydrophobic interaction chromatography (HIC) media to be used in the process of protein purification is presented. The method utilizes a medium-pressure liquid chromatography system including automated buffer blending, dynamic sample loop injection, sequential column selection, multi-wavelength analysis, and split fraction eluate collection.
JoVE Bioengineering
Lensless Fluorescent Microscopy on a Chip
Department of Electrical Engineering, University of California, Los Angeles
A lensless on-chip fluorescent microscopy platform is demonstrated that can image fluorescent objects over an ultra-wide field-of-view of e.g., >0.6-8 cm2 with <4μm resolution using a compressive sampling based decoding algorithm. Such a compact and wide-field fluorescent on-chip imaging modality could be valuable for high-throughput cytometry, rare-cell research and microarray-analysis.
JoVE Bioengineering
A Microfluidic-based Hydrodynamic Trap for Single Particles
1Center for Biophysics and Computational Biology, University of Illinois at Urbana-Champaign, 2Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign
In this article, we present a microfluidic-based method for particle confinement based on hydrodynamic flow. We demonstrate stable particle trapping at a fluid stagnation point using a feedback control mechanism, thereby enabling confinement and micromanipulation of arbitrary particles in an integrated microdevice.
JoVE Bioengineering
Wide-field Fluorescent Microscopy and Fluorescent Imaging Flow Cytometry on a Cell-phone
1Electrical Engineering Department, University of California, Los Angeles, 2Bioengineering Department, University of California, Los Angeles, 3California NanoSystems Institute (CNSI), University of California, Los Angeles
We review our recent results on the integration of fluorescent microscopy and imaging flow cytometry tools on a cell-phone using compact and cost-effective opto-fluidic attachments. These cell-phone based micro-analysis devices might be useful for cytometric analysis, such as performing various cell counting tasks as well as for high-throughput screening of e.g., water samples in resource limited settings.
JoVE Bioengineering
Endothelialized Microfluidics for Studying Microvascular Interactions in Hematologic Diseases
1Department of Pediatrics, Emory University School of Medicine, 2Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, 3Aflac Cancer Center and Blood Disorders Service of Children's Healthcare of Atlanta, 4Winship Cancer Institute of Emory University
A method to culture an endothelial cell monolayer throughout the entire inner 3D surface of a microfluidic device with microvascular-sized channels (<30 μm) is described. This in vitro microvasculature model enables the study of biophysical interactions between blood cells, endothelial cells, and soluble factors in hematologic diseases.
JoVE Editorial
JoVE 8th Issue
JoVE General
Fabrication of the Thermoplastic Microfluidic Channels
Department of Biomedical Engineering, Boston University
Here we demonstrate how to fabricate thermoplastic microfluidic chips using hot embossing and heat sealing. Then we demonstrate how to use in situ light directed surface grafting and polymerization through the sealed chip to form the composite solid phase columns.
JoVE Bioengineering
Creating Adhesive and Soluble Gradients for Imaging Cell Migration with Fluorescence Microscopy
1Centre for Vascular Research and Australian Centre for Nanomedicine, The University of New South Wales, 2School of Chemistry and Australian Centre for Nanomedicine, The University of New South Wales
A method for the assembly of adhesive and soluble gradients in a microscopy chamber for live cell migration studies is described. The engineered environment combines antifouling surfaces and adhesive tracks with solution gradients and therefore allows one to determine the relative importance of guidance cues.
JoVE General
Fabrication of a Microfluidic Device for the Compartmentalization of Neuron Soma and Axons
1Department of Biomedical Engineering, University of California, Irvine (UCI), 2Stem Cell Research Center, University of California, Irvine (UCI), 3Institute for Brain Aging and Dementia, University of California, Irvine (UCI)
In this video we demonstrate the technique of soft lithography with polydimethyl siloxane (PDMS) which we use to farbricate a microfluidic device for culturing neurons.
JoVE General
Platelet Adhesion and Aggregation Under Flow using Microfluidic Flow Cells
The platelet adhesion cascade takes place in the presence of shear flow, a factor not accounted for in conventional (static) well-plate assays. This article reports on a platelet-aggregation assay utilizing a microfluidic well-plate format to emulate physiological shear flow conditions.
JoVE General
Window on a Microworld: Simple Microfluidic Systems for Studying Microbial Transport in Porous Media
1Vanderbilt Institute for Integrative Biosystems Research and Education, Vanderbilt University, 2Department of Biomedical Engineering, Vanderbilt University, 3Department of Molecular Physiology and Biophysics, Vanderbilt University, 4Department of Physics and Astronomy, Vanderbilt University, 5Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, 6Center for Environmental Sciences and Engineering, University of Connecticut
Microfluidic devices can be used to visualize complex natural processes in real time and at the appropriate physical scales. We have developed a simple microfluidic device that mimics key features of natural porous media for studying growth and transport of bacteria in the subsurface.
JoVE Editorial
October 2012: This Month in JoVE
1Department of Ophthalmology, Massachusetts Eye and Ear, 2JoVE Content Production
Here are some highlights from the October 2012 Issue of Journal of Visualized Experiments (JoVE).
JoVE General
CD4+ T-Lymphocyte Capture Using a Disposable Microfluidic Chip for HIV
1Bio-Acoustic-MEMS Laboratory in Medicine (BAMM), HST-Center for Bioengineering, Brigham and Women's Hospital, 2Massachusetts Institute of Technology
JoVE General
The Microfluidic Probe: Operation and Use for Localized Surface Processing
Department of Biomedical Engineering, McGill University
In this video we present the microfluidic probe1 (MFP). We explain in detail how to assemble the MFP, mount it atop an inverted microscope, and align it relative to the substrate surface, and finally show how to use it to process a substrate surface immersed in a buffer solution.
JoVE Neuroscience
Imaging Analysis of Neuron to Glia Interaction in Microfluidic Culture Platform (MCP)-based Neuronal Axon and Glia Co-culture System
1Department of Neuroscience, Tufts University, 2Neuroscience Program, Tufts Sackler School of Graduate Biomedical Sciences
This study describes the procedures of setting up a novel neuronal axon and (astro)glia co-culture platform. In this co-culture system, manipulation of direct interaction between a single axon (and single glial cell) becomes feasible, allowing mechanistic analysis of the mutual neuron to glial signaling.
JoVE Editorial
JoVE 7th Issue
JoVE General
Assessing Neural Stem Cell Motility Using an Agarose Gel-based Microfluidic Device
1Biomedical Engineering Department, Cornell University, 2Neurosurgical Laboratory for Translational Stem Cell Research, Weill Cornell Brain Tumor Center, Weill Cornell Medical College of Cornell University, 3Cell Morphology Department, Instituto de Investigacion Principe Felipe, 4Department of Chemical and Biomolecular Engineering, Cornell University
We demonstrate that the over expression of epidermal growth factor receptors (EGFR) enhances the motility of neural stem cells(NSCs) using a novel agarose gel based microfluidic device. This technology can be readily adaptable to other mammalian cell systems where cell sources are scarce, such as human neural stem cells, and the turn around time is critical.
JoVE General
Non-plasma Bonding of PDMS for Inexpensive Fabrication of Microfluidic Devices
1Department of Biomedical Engineering, University of California, Irvine (UCI), 2Stem Cell Research Center, University of California, Irvine (UCI), 3Institute for Brain Aging and Dementia, University of California, Irvine (UCI)
In this video we demonstrate how to use the neuron microfluidic device without plasma bonding.
JoVE Bioengineering
High-throughput Protein Expression Generator Using a Microfluidic Platform
We present a microfluidic approach for the expression of protein arrays. The device consists of thousands of reaction chambers controlled by micro-mechanical valves. The microfluidic device is mated to a microarray-printed gene library. These genes are then transcribed and translated on-chip, resulting in a protein array ready for experimental use.
JoVE General
Biochemical Reconstitution of Steroid Receptor•Hsp90 Protein Complexes and Reactivation of Ligand Binding
1College of Nursing, Interdisciplinary Life Sciences Research Laboratory, Seattle University, 2College of Science and Engineering, Interdisciplinary Life Sciences Research Laboratory, Seattle University, 3School of Medicine, University of Washington
An in vitro method for preparing functional glucocorticoid receptor (GR)•hsp90 protein complexes from purified proteins and cellular lysates is described. The method utilizes immunoadsorption of recombinant GR followed by salt-stripping and protein complex reconstitution. The importance of cofactors and buffer conditions are discussed, as are potential method applications.
JoVE General
Applying Microfluidics to Electrophysiology
Dept. of Bioengineering, University of Illinois, Chicago
JoVE Bioengineering
Microfluidic-based Electrotaxis for On-demand Quantitative Analysis of Caenorhabditis elegans' Locomotion
1Department of Biology, McMaster University, 2Department of Mechanical Engineering, McMaster University
A semi-automated micro-electro-fluidic method to induce on-demand locomotion in Caenorhabditis elegans is described. This method is based on the neurophysiologic phenomenon of worms responding to mild electric fields (“electrotaxis”) inside microfluidic channels. Microfluidic electrotaxis serves as a rapid, sensitive, low-cost, and scalable technique to screen for factors affecting neuronal health.
JoVE Clinical and Translational Medicine
Evaluation of Cancer Stem Cell Migration Using Compartmentalizing Microfluidic Devices and Live Cell Imaging
1Department of Biomedical Engineering, University of Wisconsin-Madison, 2Materials Science Program, University of Wisconsin-Madison, 3Department of Neurological Surgery, University of Wisconsin-Madison, 4Carbone Comprehensive Cancer Center and Center for Stem Cell and Regenerative Medicine, University of Wisconsin-Madison
A compartmentalizing microfluidic device for investigating cancer stem cell migration is described. This novel platform creates a viable cellular microenvironment and enables microscopic visualization of live cell locomotion. Highly motile cancer cells are isolated to study molecular mechanisms of aggressive infiltration, potentially leading to more effective future therapies.
JoVE Bioengineering
On-Chip Endothelial Inflammatory Phenotyping
Department of Biomedical Engineering, University of California, Davis
Microfluidic flow chambers etched by photolithography and fabricated from PDMS are applied to probe functional outcomes associated with EC dysfunction and inflammation. In a representative experiment, the ability of differential shear stress to modulate monocytic cell adhesion to cytokine activated EC monolayers is demonstrated.
More Results...
