JoVE Bioengineering
Ex vivo Mimicry of Normal and Abnormal Human Hematopoiesis
1Department of Chemical Engineering and Chemical Technology, South Kensington campus, Imperial College London, 2Department of Hematology, Northwick Park & St. Mark's campus, Imperial College London
A 3D culture system for hematopoiesis is described using human cord blood and leukemic bone marrow cells. The method is based on the use of a porous synthetic polyurethane scaffold coated with extracellular matrix proteins. This scaffold is adaptable to accommodate a wide range of cells.
JoVE Bioengineering
Postproduction Processing of Electrospun Fibres for Tissue Engineering
1Materials Science and Engineering, University of Sheffield, 2Department of Biomedical Science, University of Sheffield, 3Department of Chemistry, University of Sheffield
Electrospun scaffolds can be processed post production for tissue engineering applications. Here we describe methods for spinning complex scaffolds (by consecutive spinning), for making thicker scaffolds (by multi-layering using heat or vapour annealing), for achieving sterility (aseptic production or sterilisation post production) and for achieving appropriate biomechanical properties.
JoVE Bioengineering
Elastomeric PGS Scaffolds in Arterial Tissue Engineering
1Department of Bioengineering, University of Pittsburgh, 2McGowan Institute for Regenerative Medicine, University of Pittsburgh
Elastomeric PGS scaffolds with vascular smooth muscle cells cultured in a pulsatile flow bioreactor may lead to promising small-diameter arterial constructs with native ECM production in a relatively short culture period.
JoVE Clinical and Translational Medicine
Repair of a Critical-sized Calvarial Defect Model Using Adipose-derived Stromal Cells Harvested from Lipoaspirate
1Department of Surgery, Stanford University, 2Department of Surgery, Duke University, 3Department of Surgery, Saint Joseph Mercy Hospital, 4School of Medicine, University of California, San Francisco, 5School of Dentistry, University of California, Los Angeles
This protocol describes the isolation of adipose-derived stromal cells from lipoaspirate and the creation of a 4 mm critical-sized calvarial defect to evaluate skeletal regeneration.
JoVE General
Electrospinning Fibrous Polymer Scaffolds for Tissue Engineering and Cell Culture
Department of Bioengineering, University of Pennsylvania
The process of electrospinning polymers for tissue engineering and cell culture is addressed in this article. Specifically, the electrospinning of photoreactive macromers with additional processing capabilities of photopatterning and multi-polymer electrospinning is described.
JoVE Bioengineering
Preparation of 3D Fibrin Scaffolds for Stem Cell Culture Applications
1Department of Biology, University of Victoria, 2Department of Mechanical Engineering, Division of Medical Sciences, University of Victoria
This work details the preparation of 3D fibrin scaffolds for culturing and differentiating plutipotent stem cells. Such scaffolds can be used to screen the effects of various biological compounds on stem cell behavior as well as modified to contain drug delivery systems.
JoVE Bioengineering
Cultivation of Human Neural Progenitor Cells in a 3-dimensional Self-assembling Peptide Hydrogel
Albrecht-Kossel-Institute for Neuroregeneration, University of Rostock
Here we describe the use of a self-assembling 3-dimensional scaffold to culture human neural progenitor cells. We present a protocol to release the cells from the scaffolds to be analysed subsequently e.g. by flow cytometry. This protocol might be adapted to other cell types to perform detailed mechanistically studies.
JoVE Bioengineering
Use of Human Perivascular Stem Cells for Bone Regeneration
1Dental and Craniofacial Research Institute and Section of Orthodontics, School of Dentistry, UCLA, 2UCLA and Orthopaedic Hospital, Department of Orthopaedic Surgery and the Orthopaedic Hospital Research Center, UCLA, 3Department of Bioengineering, UCLA, 4Center for Cardiovascular Science, University of Edinburgh
Human perivascular stem cells (PSCs) are a novel stem cell class for skeletal tissue regeneration similar to mesenchymal stem cells (MSCs). PSCs can be isolated by FACS (fluorescence activated cell sorting) from adipose tissue procured during standard liposuction procedures, then combined with an osteoinductive scaffold to achieve bone formation in vivo.
JoVE Bioengineering
Engineering Biological-Based Vascular Grafts Using a Pulsatile Bioreactor
1Department of Biomedical Engineering, Yale University, 2Department of Anesthesiology, Yale University School of Medicine
Our group has developed a bioreactor culture system that mimics the physiological pulsatile stresses of the cardiovascular system to regenerate implantable small-diameter vascular grafts.
JoVE Bioengineering
Fabrication of Biologically Derived Injectable Materials for Myocardial Tissue Engineering
University of California, San Diego
Methods for preparing an injectable matrix gel from decellularized tissue and injecting it into rat myocardium in vivo are described.
JoVE Bioengineering
Decellularization and Recellularization of Whole Livers
Perfusion decellularization is a novel technique to produce whole liver scaffolds that retains the organ's extracellular matrix composition and microarchitecture. Herein, the method of preparing whole organ scaffolds using perfusion decellularization and subsequent repopulation with hepatocytes is described. Functional and transplantable liver grafts can be generated using this technique.
JoVE Bioengineering
Tissue Engineering of the Intestine in a Murine Model
This article and the accompanying video present our protocol for generating tissue-engineered intestine in the mouse, using an organoid units-on-scaffold approach.
JoVE Neuroscience
Ex Vivo Organotypic Corneal Model of Acute Epithelial Herpes Simplex Virus Type I Infection
Department of Biochemistry and Molecular Biology, Drexel University College of Medicine
In this video article we describe the use of a new ex vivo model of acute herpes simplex virus type I corneal epithelial infection.
JoVE Bioengineering
Magnetic Resonance Elastography Methodology for the Evaluation of Tissue Engineered Construct Growth
1Department of Biological Systems Engineering, University of Nebraska-Lincoln, 2Department of Engineering Mechanics, University of Nebraska-Lincoln
The procedure demonstrates the methodology of magnetic resonance elastography for monitoring the engineered outcome of adipose and osteogenic tissue engineered constructs through noninvasive local assessment of the mechanical properties using microscopic magnetic resonance elastography (μMRE).
JoVE Bioengineering
Engineering a Bilayered Hydrogel to Control ASC Differentiation
1Department of Extremity Trauma Research and Regenerative Medicine, United States Army Institute of Surgical Research, 2Department of Biomedical Engineering, The University of Texas at Austin
This protocol focuses on utilizing the inherent ability of stem cells to take cue from their surrounding extracellular matrix and be induced to differentiate into multiple phenotypes. This methods manuscript extends our description and characterization of a model utilizing a bilayered hydrogel, composed of PEG-fibrin and collagen, to simultaneously co-differentiate adipose-derived stem cells1.
JoVE General
Chip-based Three-dimensional Cell Culture in Perfused Micro-bioreactors
Institute for Biological Interfaces, Forschungszentrum Karlsruhe
We describe a chip-based platform for the three-dimensional cultivation of cells in micro-bioreactors. One chip can house up to 10 Mio. cells that can be cultivated under precisely defined conditions with regard to fluid flow, oxygen tension etc. in a sterile, closed circulation loop.
JoVE Bioengineering
Tri-layered Electrospinning to Mimic Native Arterial Architecture using Polycaprolactone, Elastin, and Collagen: A Preliminary Study
1Department of Biomedical Engineering, Virginia Commonwealth University, 2Department of Anatomy and Neurobiology, Virginia Commonwealth University, 3Department of Cardiovascular Surgery, University Hospital of Geneva
The aim of this study was to mimic the native three layered architecture of the arterial wall. To accomplish this, electrospinning was employed with the use of a 3-1 (input-output) nozzle and blends of polycaprolactone, elastin, and collagen.
JoVE Bioengineering
Density Gradient Multilayered Polymerization (DGMP): A Novel Technique for Creating Multi-compartment, Customizable Scaffolds for Tissue Engineering
1Skaggs School of Pharmacy and Pharmaceutical Sciences, University of California, San Diego, 2Biomedical Sciences Program, University of California, San Diego, 3Department of Bioengineering, University of California, San Diego
Here we describe a unique strategy for creating biocompatible, layered matrices with continuous interfaces between distinct layers for tissue engineering. Such a scaffold could provide an ideal customizable environment to modulate cell behavior by various biological, chemical or mechanical cues
JoVE Bioengineering
Encapsulation of Cardiomyocytes in a Fibrin Hydrogel for Cardiac Tissue Engineering
Department of Biomedical Engineering, Tufts University
We describe the isolation of neonatal cardiomyocytes and the preparation of the cells for encapsulation in fibrin hydrogel constructs for tissue engineering. We describe methods for analyzing the tissue engineered myocardium after the culture period including active force generated upon electrical stimulation and cell viability and immunohistological staining.
JoVE Bioengineering
Procedure for Decellularization of Porcine Heart by Retrograde Coronary Perfusion
1McGowan Institute for Regenerative Medicine, 2Department of Bioengineering, University of Pittsburgh, 3Department of Cardiothoracic Surgery, Children's Hospital of Pittsburgh of UPMC, 4Department of Surgery, University of Pittsburgh
A method to rapidly and completely remove cellular components from an intact porcine heart through retrograde perfusion is described. This method yields a site specific cardiac extracellular matrix scaffold which has the potential for use in multiple clinical applications.
JoVE Bioengineering
Procedure for Lung Engineering
1Department of Biomedical Engineering, Yale University, 2Department of Biomedical Engineering, School of Medicine, Duke University, 3Department of Anesthesia, Yale University
We have developed a decellularized lung extracellular matrix and novel biomimetic bioreactor that can be used to generate functional lung tissue. By seeding cells into the matrix and culturing in the bioreactor, we generate tissue that demonstrates effective gas exchange when transplanted in vivo for short periods of time.
JoVE General
Chromatin Isolation by RNA Purification (ChIRP)
ChIRP is a novel and rapid technique to map genomic binding sites of long noncoding RNAs (lncRNAs). The method takes advantage of the specificity of anti-sense tiling oligonucleotides to allow the enumeration of lncRNA-bound genomic sites.
JoVE Bioengineering
Constructing a Collagen Hydrogel for the Delivery of Stem Cell-loaded Chitosan Microspheres
Department of Regenerative Medicine, United States Army Institute of Surgical Research
A major hurdle in current stem cell therapies is determining the most effective method to deliver these cells to host tissues. Here, we describe a chitosan-based delivery method that is efficient and simple in approach, while allowing adipose-derived stem cells to maintain their multipotency.
JoVE Bioengineering
Evaluation of Biomaterials for Bladder Augmentation using Cystometric Analyses in Various Rodent Models
1Children's Hospital Boston, Harvard Medical School, 2Tufts University
Surgical stages of bladder augmentation are described using 3-D scaffolds in murine and rat models. To test the efficacy of biomaterial configurations for use in bladder augmentation, techniques for both awake and anesthetized cystometry are presented.
JoVE General
A Step-by-step Method for the Reconstitution of an ABC Transporter into Nanodisc Lipid Particles
Department of Biochemistry and Molecular Biology, University of British Columbia
Nanodiscs are small discoid particles that incorporate membrane proteins into a small patch of phospholipid bilayer. We provide a visual protocol that shows the step-by-step incorporation of the MalFGK2 transporter into a disc.
JoVE Neuroscience
The Culture of Primary Motor and Sensory Neurons in Defined Media on Electrospun Poly-L-lactide Nanofiber Scaffolds
1Department of Biomedical Engineering, University of Michigan, 2State Key Laboratory of Bioelectronics, Southeast University, 3Department of Neurology, University of Michigan, 4Geriatric Research, Education and Clinical Center, Veterans Affairs Ann Arbor Health System
Aligned electrospun fibers direct the growth of neurons in vitro and are a potential component of nerve regeneration scaffolds. We describe a procedure for preparing electrospun fiber substrates and the serum-free culture of primary rat E15 sensory (DRG) and motor neurons. Visualization of neurons by immunocytochemistry is also included.
JoVE Bioengineering
Generation of Aligned Functional Myocardial Tissue Through Microcontact Printing
1Cardiovascular Research Center, Massachusetts General Hospital and Harvard Medical School, 2Harvard Stem Cell Institute
The generation of aligned myocardial tissue is a key requirement for adapting the recent advances in stem cell biology to clinically useful purposes. Herein we describe a microcontact printing approach for the precise control of cell shape and function. Using highly purified populations of embryonic stem cell derived cardiac progenitors, we then generate anisotropic functional myocardial tissue.
JoVE Neuroscience
Time-lapse Imaging of Neuroblast Migration in Acute Slices of the Adult Mouse Forebrain
The Cellular Neurobiology Unit, Centre de Recherche Université Laval Robert-Giffard
We describe a protocol for real-time videoimaging of neuronal migration in the mouse forebrain. The migration of virally-labeled or grafted neuronal precursors was recorded in acute live slices using wide-field fluorescent imaging with a relatively rapid acquisition interval to study the different phases of cell migration, including the durations of the stationary and migration phases and the speed of migration.
JoVE General
Implantation of Ferumoxides Labeled Human Mesenchymal Stem Cells in Cartilage Defects
Goal of the presentation is to demonstrate a highly reproducible method to generate matrix associated stem cell implants in cartilage defects, which can be visualized with MR imaging. Stem cells are labeled with FDA-approved Ferumoxides, mixed with agarose, implanted into cartilage defects and imaged with a 7T MR scanner.
JoVE General
In Vitro Analysis of PDZ-dependent CFTR Macromolecular Signaling Complexes
1Department of Biochemistry & Molecular Biology, Wayne State University School of Medicine, 2Cardiovascular Research Institute, Wayne State University School of Medicine, 3Barbara Ann Karmanos Cancer Institute, Wayne State University School of Medicine
Cystic fibrosis transmembrane conductance regulator (CFTR), an epithelial chloride channel, has been reported to interact with various proteins and regulate important cellular processes; among them the CFTR PDZ motif-mediated interactions have been well documented. This protocol describes methods we developed to assemble a PDZ-dependent CFTR macromolecular signaling complex in vitro.
JoVE Bioengineering
Directed Cellular Self-Assembly to Fabricate Cell-Derived Tissue Rings for Biomechanical Analysis and Tissue Engineering
Biomedical Engineering Department, Worcester Polytechnic Institute
This article outlines a versatile method to create cell-derived tissue rings by cellular self-assembly. Smooth muscle cells seeded into ring-shaped agarose wells aggregate and contract to form robust three-dimensional (3D) tissues within 7 days. Millimeter-scale tissue rings are conducive to mechanical testing and serve as building blocks for tissue assembly.
JoVE Bioengineering
Electrospinning Fundamentals: Optimizing Solution and Apparatus Parameters
1Department of Biomedical Engineering, University of Michigan, 2State Key Laboratory of Bioelectronics, Southeast University, 3Department of Neurology, University of Michigan, 4Geriatrics Research, Education and Clinical Center, Veterans Affairs Ann Arbor Healthcare Center
Electrospinning techniques can create a variety of nanofibrous scaffolds for tissue engineering or other applications. We describe here a procedure to optimize the parameters of the electrospinning solution and apparatus to obtain fibers with the desired morphology and alignment. Common problems and troubleshooting techniques are also presented.
JoVE General
Profiling of Methyltransferases and Other S-adenosyl-L-homocysteine-binding Proteins by Capture Compound Mass Spectrometry (CCMS)
1Department of Biochemistry / Analytics, caprotec bioanalytics GmbH, 2Institute of Organic Chemistry, RWTH Aachen University
Capture Compounds are trifunctional small molecules to reduce the complexity of the proteome by functional reversible small molecule-protein interaction followed by photo-crosslinking and purification. Here we use a Capture Compound with S-adenosyl-L-homocysteine-binding as selectivity function to isolate methyltransferases from an Escherichia coli whole cell lysate and identify them by MS.
JoVE Bioengineering
Fabrication of Electrochemical-DNA Biosensors for the Reagentless Detection of Nucleic Acids, Proteins and Small Molecules
1Department of Chemistry and Biochemistry, University Of California Santa Barbara, 2Department of Chemistry and Biochemistry, Program in BioMolecular Science and Engineering, University Of California Santa Barbara
"E-DNA" sensors, reagentless, electrochemical biosensors that perform well even when challenged directly in blood and other complex matrices, have been adapted to the detection of a wide range of nucleic acid, protein and small molecule analytes. Here we present a general procedure for the fabrication and use of such sensors.
JoVE Bioengineering
A Simple Hanging Drop Cell Culture Protocol for Generation of 3D Spheroids
Department of Surgery, UMDNJ-Robert Wood Johnson Medical School
We describe a simple, rapid method of generating 3D tissue-like spheroids and their potential application to quantify differences in cell-cell interactions.
JoVE General
Microfabrication of Chip-sized Scaffolds for Three-dimensional Cell cultivation
1Institute for Biological Interfaces, Karlsruhe Research Centre, 2Institute for BioMedical Technology, University of Twente, 3Department of Materials Research, Institute for Heavy Ion Research, 4Institute of Microstructure Technology, Karlsruhe Research Centre, 5Institute for Micro Process Engineering, Karlsruhe Research Centre
We present two processes for the microfabrication of porous polymer chips for three-dimensional cell cultivation. The first one is hot embossing combined with a solvent vapour welding process. The second one uses a recently developed microthermoforming process combined with ion track technology leading to a significant simplification of manufacture.
JoVE Clinical and Translational Medicine
Matrix-assisted Autologous Chondrocyte Transplantation for Remodeling and Repair of Chondral Defects in a Rabbit Model
1Department of Orthopaedic Sports Medicine, Klinikum rechts der Isar der Technischen Universität München, 2Department of Radiology, Klinikum rechts der Isar der Technischen Universität München, 3Institute of Experimental Oncology and Therapy Research, Klinikum rechts der Isar der Technischen Universität München, 4Department of Radiology, Uniklinik Köln
An experimental technique for the treatment of chondral defects in the rabbit's knee joint is described. The implantation of autologous chondrocytes seeded on a matrix is a well-accepted method for the remodeling and repair of articular cartilage lesions providing satisfying long-term results. Matrix-assisted autologous chondrocyte transplantation (MACT) offers a standardized and clinically established implantation method.
JoVE General
Correlative Light and Electron Microscopy (CLEM) as a Tool to Visualize Microinjected Molecules and their Eukaryotic Sub-cellular Targets
Department of Molecular Microbiology, University of Texas Southwestern Medical Center
The CLEM technique has been adapted to analyze ultrastructural morphology of membranes, organelles, and subcellular structures affected by microinjected molecules. This method combines the powerful techniques of micromanipulation/microinjection, confocal fluorescent microscopy, and electron microscopy to allow millimeter to multi-nanometer resolution. This technique is amenable to a wide variety of applications.
JoVE Bioengineering
Bioluminescence Imaging for Assessment of Immune Responses Following Implantation of Engineered Heart Tissue (EHT)
1Transplant and Stem Cell Immunobiology Lab (TSI) and CVRC, University Hospital Hamburg, University Heart Center Hamburg, 2Department of Experimental and Clinical Pharmacology and Toxicology, University Heart Center Hamburg, 3CT Surgery, Stanford University School of Medicine
This video demonstrates the use of in vivo bioluminescence imaging to study immune responses after implantation of Engineered Heart Tissue (EHT) in rats.
JoVE Clinical and Translational Medicine
Treatment of Osteochondral Defects in the Rabbit's Knee Joint by Implantation of Allogeneic Mesenchymal Stem Cells in Fibrin Clots
1Department of Orthopaedic Sports Medicine, Klinikum rechts der Isar der Technischen Universität München, 2Department of Radiology, Klinikum rechts der Isar der Technischen Universität München, 3Institute of Experimental Oncology and Therapy Research, Klinikum rechts der Isar der Technischen Universität München, 4Department of Radiology, Uniklinik Köln
An experimental technique for the treatment of osteochondral defects in the rabbit's knee joint is described. The implantation of allogeneic mesenchymal stem cells into osteochondral defects provides a promising development in the field of tissue engineering. The preparation of fibrin-cell-clots in vitro offers a standardized method for implantation.
JoVE Neuroscience
Analysis of Dendritic Spine Morphology in Cultured CNS Neurons
1Department of Physiology, Northwestern University Feinberg School of Medicine, 2Department of Psychiatry and Behavioral Sciences, Northwestern University Feinberg School of Medicine
Numerous recent studies have identified mutations in synaptic proteins associated with brain pathologies. Primary cultured cortical neurons offer great flexibility in examining the effects of these disease-associated proteins on dendritic spine morphology and motility.
JoVE General
Environmentally Induced Heritable Changes in Flax
Department of Biology, Case Western Reserve University
Growing some flax varieties under nutrient stress results in genomic variation within a subset of the genome and phenotypic variation. A complex insertion at a specific site is associated with growth under various nutrient regimes and with changes in gene expression around this site.
JoVE Immunology and Infection
In vitro tRNA Methylation Assay with the Entamoeba histolytica DNA and tRNA Methyltransferase Dnmt2 (Ehmeth) Enzyme
1Faculty of Medicine, Rappaport Institute, Technion - Israel Institute of Technology, 2The Pharmacy and Biochemistry Institute, Johannes Gutenberg University
This protocol describes the preparation of a synthetic tRNA substrate for the Entamoeba histolytica DNA/tRNA methyltransferase 2 (Dnmt2) homolog Ehmeth and the measure of its methyltransferase activity. This experimental approach can be used for investigating the activity of other Dnmt2 proteins.
JoVE General
Rat Mesentery Exteriorization: A Model for Investigating the Cellular Dynamics Involved in Angiogenesis
1Department of Biomedical Engineering, Tulane University, 2Department of Biomedical Engineering, University of Virginia, 3Center for Stem Cell Research and Regenerative Medicine, Tulane University
This article describes a simple model for stimulating angiogenesis in the rat mesentery. The model produces dramatic increases in capillary sprouting, vascular area and vascular density over a relatively short time course in a tissue that allows en face visualization of entire microvascular networks down to the single cell level.
JoVE Bioengineering
Creating Transient Cell Membrane Pores Using a Standard Inkjet Printer
Department of Bioengineering, Clemson University
A description of the methods used to convert an HP DeskJet 500 printer into a bioprinter. The printer is capable of processing living cells, which causes transient pores in the membrane. These pores can be utilized to incorporate small molecules, including fluorescent G-actin, into the printed cells.
JoVE General
Identification of Protein Complexes in Escherichia coli using Sequential Peptide Affinity Purification in Combination with Tandem Mass Spectrometry
1Banting and Best Department of Medical Research, Donnelly Centre, University of Toronto, 2Deparment of Biochemistry, Research and Innovation Centre, University of Regina, 3Department of Medical Genetics and Microbiology, University of Toronto
Affinity purification of tagged proteins in combination with mass spectrometry (APMS) is a powerful method for the systematic mapping of protein interaction networks and for investigating the mechanistic basis of biological processes. Here, we describe an optimized sequential peptide affinity (SPA) APMS procedure developed for the bacterium Escherichia coli that can be used to isolate and characterize stable multi-protein complexes to near homogeneity even starting from low copy numbers per cell.
JoVE General
Culturing and Applications of Rotating Wall Vessel Bioreactor Derived 3D Epithelial Cell Models
Basic Medical Sciences, University of Arizona College of Medicine - Phoenix
A rotating cell culture system that allows epithelial cells to grow under physiological conditions resulting in 3-D cellular aggregate formation is described. The aggregates generated display in vivo-like characteristics not observed in conventional culture models and serve as a more accurate organotypic model system for a multitude of scientific investigations.
JoVE Neuroscience
Ex utero Electroporation and Whole Hemisphere Explants: A Simple Experimental Method for Studies of Early Cortical Development
Department of Neuroscience and Physiology, SUNY Upstate Medical University
This protocol describes an improved explant procedure that involves ex utero electroporation, dissection and culture of entire cerebral hemispheres from the embryonic mouse. The preparation facilitates pharmacological studies and assays of gene function during early cortical development.
JoVE Chemistry
Microwave-assisted Intramolecular Dehydrogenative Diels-Alder Reactions for the Synthesis of Functionalized Naphthalenes/Solvatochromic Dyes
Department of Chemistry, University of Pittsburgh
Microwave-assisted intramolecular dehydrogenative Diels-Alder (DA) reactions provide concise access to functionalized cyclopenta[b]naphthalene building blocks. The utility of this methodology is demonstrated by one-step conversion of the dehydrogenative DA cycloadducts into novel solvatochromic fluorescent dyes via Buchwald-Hartwig palladium-catalyzed cross-coupling reactions.
JoVE General
Fabrication and Operation of an Oxygen Insert for Adherent Cellular Cultures
Bioengineering, University of Illinois
Fabrication and validation of an add-on platform that offers enhanced control over the spatial and temporal oxygenation in a 6-well plate. The device is adaptable to a number of culture systems and can be used to investigate the effects of oxygen on wound healing.
More Results...
