Arabidopsis thaliana Polar Glycerolipid Profiling by Thin Layer Chromatography (TLC) Coupled with Gas-Liquid Chromatography (GLC)
Composition of polar lipid extracts and the fatty acid composition of individual glycerolipids are determined in a simple and robust lipid profiling experiment. For this purpose, glycerolipids are isolated by thin layer chromatography and subjected to transmethylation of their acyl groups. Fatty acyl methylesters are quantified by gas-liquid chromatography.
The fabrication of electrically addressable, high-aspect-ratio (> 1000:1) metal nanowires separated by gaps of single nanometers using either sacrificial layers of aluminum and silver or self-assembled monolayers as templates is described. These nanogap structures are fabricated without a clean room or any photo- or electron-beam lithographic processes by a form of edge lithography known as nanoskiving.
In this work, we describe the use of the atom-probe tomography technique for studying the grain boundaries of the absorber layer in a CIGS solar cell. A novel approach to prepare the atom probe tips containing the desired grain boundary with a known structure is also presented here.
We present a simple method to produce microfluidic devices capable of applying similar dynamic conditions to multiple distinct strains, without the need for a clean room or soft lithography.
Optical Frequency Domain Imaging of Ex vivo Pulmonary Resection Specimens: Obtaining One to One Image to Histopathology Correlation
1Department of Pathology, Harvard Medical School, 2Massachusetts General Hospital, 3Wellman Center for Photomedicine, Harvard Medical School, 4Pulmonary and Critical Care Unit, Massachusetts General Hospital, 5Pulmonary and Critical Care Unit, Harvard Medical School
A method to image ex vivo pulmonary resection specimens with optical frequency domain imaging (OFDI) and obtain precise correlation to histology is described, which is essential to developing specific OFDI interpretation criteria for pulmonary pathology. This method is applicable to other tissue types and imaging techniques to obtain precise imaging to histology correlation for accurate image interpretation and assessment. Imaging criteria established with this technique would then be applicable to image assessment in future in vivo studies.
We demonstrate protocols for manufacturing and automating elastomeric polydimethylsiloxane (PDMS)-based microvalve arrays that need no extra energy to close and feature photolithographically defined precise volumes. A parallel subnanoliter-volume mixer and an integrated microfluidic perfusion system are presented.
By combining a polished and reinforced thin-skull (PoRTS) cranial window and glioblastoma (GBM) cell injection, we can observe glioma initiation and growth from injected GBM cells in the brain of a live mouse longitudinally.
Nanotopology of Cell Adhesion upon Variable-Angle Total Internal Reflection Fluorescence Microscopy (VA-TIRFM)
Topology of cell adhesion on a substrate is measured with nanometre precision by variable-angle total internal reflection fluorescence microscopy (VA-TIRFM).
Revealing Dynamic Processes of Materials in Liquids Using Liquid Cell Transmission Electron Microscopy
We have developed a self-contained liquid cell, which allows imaging through liquids using a transmission electron microscope. Dynamic processes of nanoparticles in liquids can be revealed in real time with sub-nanometer resolution.
We present a method of creating a thinned-skull cortical window (TSCW) in a mouse model for in vivo OCT imaging of the cerebral cortex.
Shidham's method for preparation of cell blocks with AV-marker from cytology specimens containing individually scattered cells and small cell groups.
This video demonstrates the preparation of an ultra-thin matrix/analyte layer for analyzing peptides and proteins by Matrix-Assisted Laser Desorption Ionization Mass Spectrometry (MALDI-MS).
Nanomoulding of Functional Materials, a Versatile Complementary Pattern Replication Method to Nanoimprinting
1Institute of Microengineering (IMT), Photovoltaics and Thin Film Electronics Laboratory, Ecole Polytechnique Fédérale de Lausanne (EPFL), 2Department of Electrical Engineering and Computer Sciences, University of California, Berkeley
We describe a nanomoulding technique which allows low-cost nanoscale patterning of functional materials, materials stacks and full devices. Nanomoulding can be performed on any nanoimprinting setup and can be applied to a wide range of materials and deposition processes.
Polycrystalline silicon thin-film solar cells on glass are fabricated by deposition of boron and phosphorous doped silicon layers followed by crystallisation, defect passivation and metallisation. Plasmonic light-trapping is introduced by forming Ag nanoparticles on the silicon cell surface capped with a diffused reflector resulting in ~45% photocurrent enhancement.
The mechanical characteristics of endothelial glycocalyx were measured by indentation using micron sized spheres on AFM cantilevers. Endothelial cells were cultured in a custom chamber under physiological flow conditions to induce glycocalyx expression. Data were analyzed using a thin film model to determine the glycocalyx thickness and modulus.
Here we present a mounting protocol for stained Drosophila embryos in an upright position that allows imaging of cross-sections using Confocal microscopy.
The non-human primate is an important translational species for our understanding of development and aging. The anatomical organization of the primate retina may provide important insights into normal and pathological conditions in humans.
Fluorescent-core microcavity sensors employ a high-index quantum-dot coating in the channel of silica microcapillaries. Changes in the refractive index of fluids pumped into the capillary channel cause shifts in the microcavity fluorescence spectrum that can be used to analyze the channel medium.
1Department of Materials Science and Engineering, MIT - Massachusetts Institute of Technology, 2Department of Mechanical Engineering, MIT - Massachusetts Institute of Technology, 3HST Center for Biomedical Engineering and Harvard Stem Cell Institute, Brigham and Women's Hospital and Harvard Medical School
We describe a protocol to observe and analyze cell rolling trajectories on asymmetric receptor-patterned substrates. The resulting data are useful for engineering of receptor-patterned substrates for label-free cell separation and analysis.
1Institute for Biological Interfaces, Karlsruhe Research Centre, 2Institute for BioMedical Technology, University of Twente, 3Department of Materials Research, Institute for Heavy Ion Research, 4Institute of Microstructure Technology, Karlsruhe Research Centre, 5Institute for Micro Process Engineering, Karlsruhe Research Centre
We present two processes for the microfabrication of porous polymer chips for three-dimensional cell cultivation. The first one is hot embossing combined with a solvent vapour welding process. The second one uses a recently developed microthermoforming process combined with ion track technology leading to a significant simplification of manufacture.
A micropunching lithography approach is developed to generate micro- and submicron-patterns on top, sidewall and bottom surfaces of polymer substrates. It overcomes the obstacles of patterning conducting polymers and generating sidewall patterns. This method allows rapid fabrication of multiple features and is free of aggressive chemistry.
Here we present an electrophysiological method based on solid supported membranes with focus on its applications for the characterization of electrogenic membrane transporters.
1Temple University, Shriners Hospitals Pediatric Research Center and Department of Anatomy and Cell Biology, 2Medical Research Service, Department of Veterans Affairs Hospital, 3Department of Neurobiology and Anatomy, Drexel University College of Medicine, 4Shriners Hospitals Pediatric Research Center and Department of Anatomy and Cell Biology, Temple University School of Medicine
An in vivo imaging protocol to monitor primary sensory axons following dorsal root crush is described. The procedures utilize wide-field fluorescence microscopy and thy1-YFP transgenic mice, and permit repeated imaging of axon regeneration over 4 cm in the PNS and axon interactions with the interface of the CNS.
We describe experimental details of the synthesis of patterned and reconfigurable particles from two dimensional (2D) precursors. This methodology can be used to create particles in a variety of shapes including polyhedra and grasping devices at length scales ranging from the micro to centimeter scale.
Visualizing Proteins and Macromolecular Complexes by Negative Stain EM: from Grid Preparation to Image Acquisition
Visualizing protein samples by negative stain electron microscopy (EM) has become a popular structural analysis method. It is useful for quantitative structural analysis, such as calculating a 3D reconstruction of the molecules being studied, and also for qualitative examination of the quality of protein preparations. In this article we present detailed protocols for preparing the EM grids, staining the sample and visualizing the sample in an electron microscope. Novice users can follow these protocols easily and to utilize negative stain EM as a routine assay, in addition to other biochemical assays, for evaluating their protein samples.
Lens development involves interactions with other tissues. Several zebrafish eye mutants are characterized by an abnormally small lens size. Here we demonstrate a lens transplantation experiment to determine whether this phenotype is due to intrinsic causes or defective interactions with tissues that surround the lens.
Concurrent Quantitative Conductivity and Mechanical Properties Measurements of Organic Photovoltaic Materials using AFM
Organic photovoltaic (OPV) materials are inherently inhomogeneous at the nanometer scale. Nanoscale inhomogeneity of OPV materials affects performance of photovoltaic devices. In this paper, we describe a protocol for quantitative measurements of electrical and mechanical properties of OPV materials with sub-100 nm resolution.
Spider silk fibers display extraordinary mechanical properties. Engineered Araneus diadematus Fibroin 4 (eADF4) can be processed into nonwoven meshes using electrospinning. Here, the eADF4 nonwoven meshes are used to improve the performance of air filtering devices.
Synthesis, Assembly, and Characterization of Monolayer Protected Gold Nanoparticle Films for Protein Monolayer Electrochemistry
Alkanethiolate stabilized gold colloids known as monolayer protected clusters (MPCs) are synthesized, characterized, and assembled into thin films as an adsorption interface for protein monolayer electrochemistry of simple redox protein like Pseudomonas aeruginosa azurin (AZ) and cytochrome c (cyt c).
An integrated microfluidic thermoplastic chip has been developed for use as a molecular diagnostic. The chip performs nucleic acid extraction, reverse transcriptase, and PCR. Methods for fabricating and running the chip are described.
A high-sensitivity photonic micro sensor was developed for electric field detection. The sensor exploits the optical modes of a dielectric sphere. Changes in the external electric field perturb the sphere morphology leading to shifts in its optical modes. The electric field strength is measured by monitoring these optical shifts.
Magnetic resonance imaging (MRI) provides a powerful tool to evaluate the effectiveness of process equipment during operation. We discuss the use of MRI to visualize mixing in a static mixer. The application is relevant to personal care products, but can be applied to a broad range of food, chemical, biomass and biological fluids.
The methodology for fabricating synthetic vocal fold models is described. The models are life-sized and mimic the multi-layer structure of the human vocal folds. Results show the models to self-oscillate at pressures comparable to lung pressure and demonstrate flow-induced vibratory responses that are similar to those of human vocal folds.
1Laboratory of Biophysics and Surface Analysis, University of Nottingham, 2School of Molecular Medical Sciences, University of Nottingham, 3David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology
A description of the formation of a polymer microarray using an on-chip photopolymerization technique. The high throughput surface characterization using atomic force microscopy, water contact angle measurements, X-ray photoelectron spectroscopy and time of flight secondary ion mass spectrometry and a cell attachment assay is also described.
Single Particle Electron Microscopy Reconstruction of the Exosome Complex Using the Random Conical Tilt Method
This article describes a standard method to get a three-dimensional (3D) reconstruction of biological macromolecules using negative staining electron microscopy (EM). In this protocol, we explain how to get the 3D structure of the Saccharomyces cerevisiae exosome complex at medium resolution using the random conical tilt reconstruction method (RCT).
Fabrication of Micropatterned Hydrogels for Neural Culture Systems using Dynamic Mask Projection Photolithography
Simple techniques are described for the rapid production of microfabricated neural culture systems using a digital micromirror device for dynamic mask projection lithography on regular cell culture substrates. These culture systems may be more representative of natural biological architecture, and the techniques described could be adapted for numerous applications.
A Thin-skull Window Technique for Chronic Two-photon In vivo Imaging of Murine Microglia in Models of Neuroinflammation
We describe a method for repeatedly visualizing murine microglia and circulating monocytes in vivo over hours, days or weeks using transcranial two-photon microscopy. We demonstrate how to prepare a thinned-skull window that allows intermittent observation of quiescent microglia that can be activated by adjacent stereotactic injection of the HIV-1 regulatory protein Tat.
This protocol illustrates the technique for extracting oocytes or early-stage fertilized embryos from the oviduct of mice. The ability to identify the infindibulum and insert a blunt end needle into it is essential to correctly performing the procedure.
Here we describe a novel assay for monitoring prion uptake and trafficking by immune cells immediately following intraperitoneal inoculation by purifying and fluorescently labeling aggregated prion rods from infected brain material then monitoring their uptake and movement from the injection site and characterizing the cells mediating these events.
In this video and supplemental material, we show a protocol for chronic in vivo imaging of the intact brain using a thinned-skull preparation.
1Department of Physics, University of California, San Diego, 2Department of Engineering Science and Mechanics, Pennsylvania State University, 3Department of Neurosurgery, Pennsylvania State University, 4Section of Neurobiology, University of California, San Diego
We present a method to form an imaging window in the mouse skull that spans millimeters and is stable for months without inflammation of the brain. This method is well suited for longitudinal studies of blood flow, cellular dynamics, and cell/vascular structure using two-photon microscopy.
We describe the experimental method to deposit nanostructured oxide thin films by nanosecond Pulsed Laser Deposition (PLD) in the presence of a background gas. By using this method Al-doped ZnO (AZO) films, from compact to hierarchically structured as nano-tree forests, can be deposited.
We describe a method to prepare organotypic hippocampal slices that can be easily adapted to other brain regions. Brain slices are laid on porous membranes and culture media is allowed to form an interface. This method preserves the gross architecture of the hippocampus for up to 2 weeks in culture.
Thermo Scientific NanoDrop Products, Wilmington, Delaware
The use of NanoDrop microvolume systems as practical and efficient alternatives to traditional nucleic acid quantitation methodology is described through the demonstration of two microvolume nucleic acid quantitation protocols.
Structure of HIV-1 Capsid Assemblies by Cryo-electron Microscopy and Iterative Helical Real-space Reconstruction
This article describes a method to obtain a three-dimensional (3D) structure of helically assembled molecules using cryo-electron microscopy. In this protocol, we use HIV-1 capsid assemblies to illustrate the detailed 3D reconstruction procedure for achieving a density map by the iterative helical real-space reconstruction method.
Long-term, High-resolution Confocal Time Lapse Imaging of Arabidopsis Cotyledon Epidermis during Germination
We describe a protocol using chamber slides and media to immobilize plant cotyledons for confocal imaging of the epidermis over several days of development, documenting stomatal differentiation. Fluorophore-tagged proteins can be tracked dynamically by expression and subcellular localization, increasing understanding of their possible roles during cell division and cell-type differentiation.
This video describes the manipulation of cultured neurons using laser tweezers in vitro.
The goal of this article is to demonstrate a method to optimize immunofluorescent detection of estrogen receptor-α (ERα) in rat pial arterial slices using a digital immunofluorescent microscope.
Solid-phase Submonomer Synthesis of Peptoid Polymers and their Self-Assembly into Highly-Ordered Nanosheets
A simple and general manual peptoid synthesis method involving basic equipment and commercially available reagents is outlined, enabling peptoids to be easily synthesized in most laboratories. The synthesis, purification and characterization of an amphiphilic peptoid 36mer is described, as well as its self-assembly into highly-ordered nanosheets.
The generation of aligned myocardial tissue is a key requirement for adapting the recent advances in stem cell biology to clinically useful purposes. Herein we describe a microcontact printing approach for the precise control of cell shape and function. Using highly purified populations of embryonic stem cell derived cardiac progenitors, we then generate anisotropic functional myocardial tissue.