Paolo Fino Department of Applied Science and Technology Politecnico di Torino Biography Publications Institution JoVE Articles Paolo Fino has not added a biography. If you are Paolo Fino and would like to personalize this page please email our Author Liaison for assistance. Publications Characterization of an Additive Manufactured TiAl Alloy-Steel Joint Produced by Electron Beam Welding Materials (Basel, Switzerland). Jan, 2018 | Pubmed ID: 29342074 Study of the Microstructure and Cracking Mechanisms of Hastelloy X Produced by Laser Powder Bed Fusion Materials (Basel, Switzerland). Jan, 2018 | Pubmed ID: 29324658 On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties Materials (Basel, Switzerland). Jan, 2017 | Pubmed ID: 28772436 3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol-Gel Technique ACS Applied Materials & Interfaces. Mar, 2016 | Pubmed ID: 26871993 Productie van enkele Tracks van Ti-6Al-4V door afzetting van gerichte energie om te bepalen van de laagdikte voor gelaagde afzetting Abdollah Saboori1, Simona Tusacciu2, Mattia Busatto2, Manuel Lai2, Sara Biamino1, Paolo Fino1, Mariangela Lombardi1 1Department of Applied Science and Technology, Politecnico di Torino, 2IRIS S.r.l. JoVE 56966 Engineering
Productie van enkele Tracks van Ti-6Al-4V door afzetting van gerichte energie om te bepalen van de laagdikte voor gelaagde afzetting Abdollah Saboori1, Simona Tusacciu2, Mattia Busatto2, Manuel Lai2, Sara Biamino1, Paolo Fino1, Mariangela Lombardi1 1Department of Applied Science and Technology, Politecnico di Torino, 2IRIS S.r.l. JoVE 56966 Engineering
