# Thomson’s e/m Experiment

JoVE Core
Physik
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich.  Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
JoVE Core Physik
Thomson’s e/m Experiment
##### Vorheriges Video28.6: Magnetic Force

J. J. Thomson's experiment determined the ratio of charge to mass for electrons.

He used a setup with crossed electric and magnetic fields, such that only electrons with a specific speed, the ratio of the electric and magnetic fields, passed through it.

In an evacuated glass tube, electrons were accelerated from a hot cathode and transformed into a beam by the potential difference between the cathode and the two anodes.

The kinetic energy gained by the electrons equals the lost electric potential energy. So, he determined the electrons' speed.

The velocity-selected electrons struck the fluorescent screen and made it glow.

Then, he solved the two equations to determine an electron's charge to mass ratio.

All quantities on the right-hand side are independent of the type of residual gas in the tube, the cathode material, or any other aspect of the experiment, implying that the electrons in the beam are a fundamental constituent of all matter.

The most precise calculated value of e/m is 1.759 x 1011 coulombs per kilogram.

## Thomson’s e/m Experiment

In a beam of charged particles created by a heated cathode, the particles move at different speeds. However, many applications need a beam with uniform particle speeds. An arrangement known as a velocity selector uses electric and magnetic fields to pick particles with a particular speed from the beam.

A particle with charge q, speed v, and mass m enters an area from the top, where the magnetic and electric fields are perpendicular both to the particle's motion and to one another. The magnetic field is into the plane of the paper, while the electric field E is to the left. If the charge q is positive, the magnetic force is towards the right with magnitude qvB, and the electric force is towards the left with magnitude qE. The two forces are equal in strength for the given field strengths E and B for a specific value of v, for which the total force is zero, given by

J. J. Thomson (1856–1940) used this concept to determine the electron's charge-to-mass ratio in one of the classic physics experiments at the end of the 19th century. A voltage difference between the two anodes and cathodes in a highly evacuated glass container accelerates and shapes a beam of hot cathode electrons. The accelerating potential V determines the electrons' velocity v. The lost electric potential energy equals the acquired kinetic energy.

Only the electrons with a speed equal to E/B can pass straight through the crossed electric and magnetic fields and strike the fluorescent screen that glows at the point of impact.

The electron's charge-to-mass ratio is calculated to be

Its value is determined as follows:

The fact that Thomson only discovered one value for this number was an essential feature of his measurements. The cathode material, the remaining gas in the tube, or any other aspect of the experiment had no bearing on it. This independence demonstrated that the beam's constituent particles, now known as electrons, are a component of all matter. As a result, Thomson is credited with discovering the electron as the first elementary and truly fundamental particle.

The American scientist Robert Millikan could precisely measure the electron's charge 15 years after Thomson's investigations. This number and the charge-to-mass ratio made it possible to calculate the electron's mass. Currently, the most exact value that is obtainable is