Waiting
Login processing...

Trial ends in Request Full Access Tell Your Colleague About Jove

11.10: Faseovergangen: Smelten en Bevriezen
INHOUDSOPGAVE

JoVE Core
Chemistry

A subscription to JoVE is required to view this content.

Education
Phase Transitions: Melting and Freezing
 
TRANSCRIPT

11.10: Phase Transitions: Melting and Freezing

Heating a crystalline solid increases the average energy of its atoms, molecules, or ions, and the solid gets hotter. At some point, the added energy becomes large enough to partially overcome the forces holding the molecules or ions of the solid in their fixed positions, and the solid begins the process of transitioning to the liquid state or melting. At this point, the temperature of the solid stops rising, despite the continual input of heat, and it remains constant until all of the solid is melted. Only after all of the solid has melted will continued heating increase the temperature of the liquid.

If heating is stopped during melting and the solid-liquid mixture is placed in a perfectly insulated container so no heat can enter or escape, the solid and liquid phases will remain in equilibrium. This is almost the situation with a mixture of ice and water in a very good thermos bottle; almost no heat gets in or out, and the mixture of solid ice and liquid water remains for hours. In a mixture of solid and liquid at equilibrium, the reciprocal processes of melting and freezing occur at equal rates, and the quantities of solid and liquid, therefore, remain constant. The temperature at which the solid and liquid phases of a given substance are in equilibrium is called the melting point of the solid or the freezing point of the liquid.

Use of one term or the other is normally dictated by the direction of the phase transition being considered, for example, solid to liquid (melting) or liquid to solid (freezing). The enthalpy of fusion and the melting point of a crystalline solid depend on the strength of the attractive forces between the units present in the crystal. Molecules with weak attractive forces form crystals with low melting points. Crystals consisting of particles with stronger attractive forces melt at higher temperatures.

The amount of heat required to change one mole of a substance from the solid state to the liquid state is the enthalpy of fusion, ΔHfus of the substance. The enthalpy of fusion of ice is 6.0 kJ/mol at 0 °C. Fusion (melting) is endothermic.

Eq1

The reciprocal process, freezing, is an exothermic process whose enthalpy change is −6.0 kJ/mol at 0 °C:

Eq1

This text is adapted from Openstax, Chemistry 2e, Section 10.3: Phase Transitions.

Tags

Phase Transitions Melting Freezing Solid Liquid Heat Thermal Energy Vibration Intermolecular Forces Lattice Melting Point Fusion Point Molar Heat Of Fusion Molar Enthalpy Of Fusion Endothermic Process Positive Enthalpy Value Ice Temperature Increase Heat Of Vaporization

Get cutting-edge science videos from JoVE sent straight to your inbox every month.

Waiting X
Simple Hit Counter