Login processing...

Trial ends in Request Full Access Tell Your Colleague About Jove

13.2: Misurazione della velocità di reazione
INDICE DEI
CONTENUTI

JoVE Core
Chemistry

A subscription to JoVE is required to view this content. You will only be able to see the first 20 seconds.

Education
Measuring Reaction Rates
 
TRASCRIZIONE

13.2: Measuring Reaction Rates

Polarimetry finds application in chemical kinetics to measure the concentration and reaction kinetics of optically active substances during a chemical reaction. Optically active substances have the capability of rotating the plane of polarization of linearly polarized light passing through them—a feature called optical rotation. Optical activity is attributed to the molecular structure of substances. Normal monochromatic light is unpolarized and possesses oscillations of the electrical field in all possible planes perpendicular to the direction of its propagation. When an unpolarized light passes through a polarizer, a linearly polarized light maintaining oscillations in one plane emerges out.

A polarimeter instrument determines the polarization direction of the light or the rotation produced by an optically active substance. In a polarimeter, the plane-polarized light is introduced to a tube containing the reacting solution, and the reaction can be followed without disturbing the system. If the sample contains optically inactive substances, there will be no change in the orientation of the plane of the polarized light. The light will be visible in the same intensity on the analyzer screen, and the angle of rotation reading (ɑ) will read zero degrees.

However, the presence of optically active compounds in the reacting sample causes the rotation of the plane of the polarized light passing through. The light emerging out will be less bright. The axis of the analyzer device will have to be rotated in a clockwise (dextrorotatory) or counter-clockwise (levorotatory) direction to observe the maximum brightness. The direction in which the analyzer needs to be rotated depends on the nature of the compound present. The optical rotation measured is proportional to the concentration of the optically active substances present in the sample. By analyzing the angle of rotation measurements at different time points, the concentrations of the optically active compounds can be determined as a function of time.

Spectrometry

Optical experimental techniques like spectrometry are also frequently employed to monitor chemical reactions and secure quantitative information on reaction kinetics. Using spectrometry, the light of a specific wavelength is made to pass through a reacting sample. The molecules or compounds (either a reactant or product) within the sample may absorb some light while transmitting the remaining amount, which is measured by a detector. The quantity of light absorbed depends on the concentration of the compound or molecule of interest. For instance, the higher the concentration of a compound, the larger its absorbance. From the absorbance, the instrument will be able to determine the concentration of the compound of interest. In a reacting sample, the absorbance measured at periodic intervals computes the concentrations of the reactant or product as a function of time.

Pressure Measurements

For reactions involving gas-phase substances, the reaction kinetics is followed by quantifying the changes in the number of moles of gases as a function of the changes in pressure. The experimental settings of a gas-phase reaction can be connected to a manometer that could measure the pressure of either a gaseous reactant or product. As the reaction progresses, the pressure of the reactants decreases, and(or) the products' pressure increases. This can be measured by the manometer as a function of time. By employing the ideal gas law—the concentration of a gas is proportional to its partial pressure—the rate of a chemical reaction can be calculated.

Get cutting-edge science videos from JoVE sent straight to your inbox every month.

Waiting X
simple hit counter