Waiting
Login processing...

Trial ends in Request Full Access Tell Your Colleague About Jove
JoVE Science Education
Organic Chemistry II

A subscription to JoVE is required to view this content.

 

Ozonolysis of Alkenes

Overview

Source: Vy M. Dong and Zhiwei Chen, Department of Chemistry, University of California, Irvine, CA

This experiment will demonstrate an example of an ozonolysis reaction to synthesize vanillin from isoeugenol (Figure 1). Ozonolysis of alkenes, an oxidation reaction between ozone and an alkene, is a common method to prepare aldehydes, ketones, and carboxylic acids. This experiment also demonstrates the use of an ozone generator and a low temperature (−78 °C) reaction.

Figure 1
Figure 1. Diagram showing the ozonolysis of isoeugenol to vanillin.

Principles

The oxidative cleavage of alkenes to two carbonyl-group-containing compounds is called an ozonolysis reaction (Figure 2). The proposed mechanism (Figure 3) begins with a [3+2] cycloaddition between alkene 1 with ozone to generate the molozonide intermediate A. A is unstable and rearranges into the more stable ozonide C via the zwitterion B. C decomposes in the presence of a reductant such as dimethyl sulfide to furnish the two carbonyl products (2, 3) and dimethyl sulfoxide. When a nucleophilic solvent is used (e.g., methanol), the nucleophile attacks intermediate B to form a hydroperoxide E, which decomposes to the product 3 when dimethyl sulfide is added (Figure 4). The reaction is typically performed at −78 °C to prevent side reactions and in the presence of an indicator to determine when the reaction is complete. Sudan III is a commonly used indicator. Initially, the reaction mixture is red and turns to purple/blue when all of the alkene is consumed. When all of the alkene has reacted, the indicator, which has a N-N double bond, reacts with the ozone thereby giving the color change.

Figure 2
Figure 2. Diagram showing the general ozonolysis reaction of an alkene with a reductive workup.

Figure 3
Figure 3. Diagram showing the general mechanism of alkene ozonolysis.

Figure 4
Figure 4. Diagram showing the formation of a hydroperoxide from intermediate B.

Subscription Required. Please recommend JoVE to your librarian.

Procedure

  1. Add 200 mg of isoeugenol, 15 mL of MeOH, and ~ 2 mg of Sudan III to a 3-necked 50- mL round bottom flask equipped with a magnetic stir bar.
  2. Connect the reaction flask to an oxygen tank and a bubbler.
  3. Turn on the flow of oxygen.
  4. Cool the reaction mixture with a dry ice/acetone bath.
  5. Switch on the ozone generator, which converts the oxygen from the tank to ozone that goes into the reaction flask. The generator will be between the oxygen tank and the reaction flask. Allow the reaction mixture to stir until the red color changes to purple/blue.
  6. Turn off the ozone generator, and allow oxygen to purge the reaction mixture of ozone for 5 min.
  7. Remove the cooling bath and add 0.2 mL of dimethyl sulfide.
  8. Stir the reaction mixture while warming to room temperature for 1 h.
  9. Remove the solvent by rotary evaporation. Make a silica plug by placing silica gel into a Büchner funnel. Dissolve the residue in 10% ethyl acetate in hexanes and pass the solution through the silica plug under vacuum to remove impurities. Wash the silica plug 2 more times with 10% ethyl acetate in hexanes. Collect the filtrate and remove the solvent by rotary evaporation to obtain vanillin as a white solid.
  10. Calculate the percent yield of vanillin obtained and establish its purity and identity by melting point (m.p.) and 1H NMR.

Ozonolysis is the oxidation of unsaturated bonds in organic compounds by ozone.

Ozonolysis is most frequently used to cleave alkenes to obtain two carbonyl products. Ozone also reacts with alkynes and hydrazones. Ozonolysis is used in organic chemistry research, particularly natural product synthesis, and in industrial-scale synthesis of pharmaceuticals.

This video will illustrate the procedure for ozonolysis of alkenes and introduce a few applications of ozonolysis in chemistry.

Ozonolysis of an alkene begins with cycloaddition of ozone across the carbon-carbon double bond to form an unstable intermediate called a molozonide. The molozonide then dissociates into a carbonyl oxide and a carbonyl. These fragments rearrange to move the carbonyl oxygen away from the carbonyl oxide oxygens. The fragments then recombine by cycloaddition into a more stable ozonide, in which the carbonyl oxygen is bound to the carbon atoms.

The ozonide is worked up to cleave the ring into the carbonyl products. If both substituents on a side are carbon groups, a ketone is formed regardless of the workup conditions. Given a hydrogen substituent, oxidative workup with a hydrogen peroxide will produce a carboxylic acid. Reductive workup with zinc in acetic acid or dimethyl sulfide will produce an aldehyde.

Alkene ozonolysis is usually performed in the presence of an indicator to track the reaction progress. An indicator is a compound with a different visual appearance at different stages in the reaction. For example, ozonolysis of the indicator Sudan III results in a color change from bright red to deep blue or purple. Alkenes undergo ozonolysis faster than Sudan III, so the color change indicates that the alkene ozonolysis reaction has completed.

Now that you understand the principles of ozonolysis of alkenes, let's go through a procedure for ozonolysis of isoeugenol in one of the pioneering reactions for commercial vanillin synthesis.

To begin the procedure, combine 200 mg of isoeugenol, 15 mL of methanol, and approximately 2 mg of the indicator Sudan III in a 3-necked round-bottom flask equipped with a stir bar.

Secure the flask in a fume hood over a stir plate. Ensure that the ozone generator is off, and then connect the flask to the generator and an oil bubbler.

Turn on the stirring motor to mix the solution. Ensure that the red indicator is evenly distributed throughout the reaction mixture. Then, prepare a cooling bath of dry ice in acetone.

Start the oxygen flow via the ozone generator. Place the cooling bath on a lab jack and raise the bath to cool the reaction mixture. Once the mixture has cooled, start the ozone generator.

Monitor the reaction mixture as it stirs until the mixture becomes blue to purple in appearance. Then, turn off the ozone generator and purge the reaction mixture with diatomic oxygen for 5 min.

Once the purging is complete, turn off the oxygen flow and lower the cooling bath out from under the flask. To begin the reductive workup, add 0.2 mL of dimethyl sulfide to the flask. Allow the mixture to warm to room temperature while stirring for 1 h.

Then, remove excess solvent with a rotary evaporator. Once this is done, dissolve the residue in 10 mL of 10% ethyl acetate in hexanes.

Connect a vacuum filtration flask to a vacuum line. Secure a Büchner funnel in the flask and load the funnel with silica gel.

Purify the product mixture by vacuum filtration. Wash the product through the silica gel with two portions of 10% ethyl acetate in hexanes.

Transfer the filtrate to a round-bottomed flask. Again remove the solvent with a rotary evaporator to obtain vanillin as yellow to white crystalline needles.

Calculate the percent yield, determine the melting point, and obtain a proton NMR spectrum of the product.

Vanillin is obtained as a white crystalline solid. The melting point range in literature is 81 to 83 degrees. Proton NMR spectra may be compared to previous literature reports.

Ozonolysis is widely used in chemistry and biology. Let's look at a few examples.

Ozonolysis is a step of many industrial syntheses of pharmaceuticals. For instance, the antibiotics ceftibuten and cefaclor are produced from a common intermediate product accessed by ozonolysis of a terminal alkene to a ketone. The intermediate ketone product can interconvert with an enol form. The enol hydroxy group then undergoes different reactions in the remaining steps to the two antibiotics.

Ozonolysis can be the final step of a technique for stereoselectively alkylating the alpha carbon of aldehydes and ketones. In this reaction, a pyrrolidine reagent controls the stereoselectivity of the carbon-carbon bond formation by forming a sterically bulky hydrazone. After alkylation of the alpha carbon, the carbon-nitrogen double bond of the hydrazone can be cleaved by ozonolysis to regenerate the ketone or aldehyde following reductive workup.

You've just watched JoVE's introduction to ozonolysis. You should now understand the underlying principles of ozonolysis, the procedure for ozonolysis of alkenes, and a few examples of how ozonolysis is used in organic chemistry. Thanks for watching!

Subscription Required. Please recommend JoVE to your librarian.

Results

Vanillin was obtained as a white solid (150 mg, 76% yield); m.p. 76-79 °C; 1H NMR (400 MHz, CDCl3) δ 9.82 (br s, 1H), 7.43-7.41 (m, 2H), 7.04 (d, J = 8.8 Hz, 1H), 6.30 (s, 1H), 3.96 (s, 3H).

Subscription Required. Please recommend JoVE to your librarian.

Applications and Summary

In this experiment, we have demonstrated the synthesis of vanillin from isoeugenol using the ozonolysis reaction. Also, using an ozone generator while performing a low temperature reaction was shown.

Ozonolysis is a useful reaction to prepare aldehydes, ketones, and carboxylic acids from alkenes. It has been applied in natural product synthesis and industrial-scale preparation of pharmaceuticals. Artemisinin is a potent antimalarial agent and was one of the natural products recognized in the 2015 Nobel Prize in Medicine. In a 10-step synthesis from (R)-(+)-pulegone, ozonolysis was used in the last step to make the natural product (Figure 5). Ceftibuten and cefaclor are cephalosporin antibiotics produced on industrial scale. One commercial route uses ozonolysis to access a common key intermediate, which can be elaborated to both compounds (Figure 6).

Figure 5
Figure 5. Diagram showing ozonolysis as the last step in a synthesis of artemisinin.

Figure 6
Figure 6. Diagram showing ozonolysis to prepare a key intermediate in the divergent synthesis of cefaclor and ceftibuten.

Subscription Required. Please recommend JoVE to your librarian.

Transcript

Tags

Ozonolysis Alkenes Oxidation Unsaturated Bonds Ozone Carbonyl Products Alkynes Hydrazones Organic Chemistry Research Natural Product Synthesis Industrial-scale Synthesis Pharmaceuticals Procedure Applications Cycloaddition Molozonide Carbonyl Oxide Carbonyl Fragments Ozonide Workup Conditions Ketone Carboxylic Acid Aldehyde Indicator

Get cutting-edge science videos from JoVE sent straight to your inbox every month.

Waiting X
Simple Hit Counter