10,526 Views
•
07:13 min
•
April 16, 2017
DOI:
Transcript
Automatically generated
Summary
Automatically generated
Se presenta un protocolo para la fabricación de andamios porosos, nanoestructurado estabilizada con itria-zirconia (YSZ) a temperaturas entre 1000 ° C y 1400 ° C.
Related Videos
09:23
Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures
Related Videos
20018 Views
07:51
Fabrication of Silica Ultra High Quality Factor Microresonators
Related Videos
16038 Views
09:50
Preparation and Reactivity of Gasless Nanostructured Energetic Materials
Related Videos
10125 Views
09:20
Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology
Related Videos
7596 Views
07:32
Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
Related Videos
10155 Views
08:01
Fabrication of 3D Carbon Microelectromechanical Systems (C-MEMS)
Related Videos
12023 Views
07:51
Measurements of Soil Carbon by Neutron-Gamma Analysis in Static and Scanning Modes
Related Videos
7248 Views
08:55
Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses
Related Videos
8418 Views
06:49
Radio Frequency Magnetron Sputtering of GdBa2Cu3O7−δ/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates
Related Videos
7535 Views
08:35
Hybrid Printing for the Fabrication of Smart Sensors
Related Videos
8047 Views
Read Article
Cite this Article
Muhoza, S. P., Cottam, M. A., Gross, M. D. High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels. J. Vis. Exp. (122), e55500, doi:10.3791/55500 (2017).
Copy