Waiting
Login processing...

Trial ends in Request Full Access Tell Your Colleague About Jove

This content is Free Access.

Subtitles
Newton's Laws of Motion
 

Newton's Laws of Motion

Overview

Source: Andrew Duffy, PhD, Department of Physics, Boston University, Boston, MA

This experiment examines at various situations involving two interacting objects.

First, the experiment examines the forces that two objects apply to one another while they collide. The objects are wheeled carts that have variable masses. The purpose of this experiment is to discover when the force the first cart exerts on the other is the same magnitude as the force the second cart exerts back on the first, as well as when these two forces have different magnitudes.

Second, it examines the forces that two objects exert on one another when one cart is pushing or pulling the second one. Again, the focus is on exploring the situations in which the two forces have the same magnitude and in which they have different magnitudes.

Principles

The primary goal of this experiment is to explore Newton's third law.

The apparatus consists of two carts, each with a force sensor mounted on top (Figure 1). The force sensors are connected to a computer via a dedicated computer interface. Each force sensor measures the force exerted upon it by the other force sensor during the collision or the push/pull situation.

Figure 1
Figure 1. The basic setup. Key components of the apparatus are the two wheeled carts, each with a force sensor mounted on top, and a computer interface.

Procedure

1. Collision Situations

  1. Screw a rubber bumper (Figure 1) into each force sensor.
  2. Set each force sensor on the 50-N setting.
  3. Zero the force sensors before each trial by pushing the "Zero" button next to the green arrow that starts data collection.
  4. Check to see that the positive direction (i.e., to the right) is defined appropriately for each force sensor.
    1. Push in on the force sensor mounted on the right of the cart; this should result in a positive force reading. Push in on the force sensor mounted on the left of the cart; this should result in a negative force reading.
    2. If both are wrong, simply reverse the position of the cart.
  5. If only one is wrong, go to the "Experiment menu" and select "Setup Sensors." Choose the appropriate force sensor and select "Reverse Direction."
  6. The first collision involves carts of equal mass. Designate one cart to be stationary prior to the collision. The other cart will be given an initial velocity toward the stationary cart so that the carts collide.
  7. Hit the "Collect" button (the green arrow) before pushing one cart toward the other. Give one cart a small shove, release the cart, and observe the collision. Peak force values between about 8 and 20 N should be observed in a typical trial. Adjust the push if the peak force values are much smaller than or much larger than this range.
  8. After the collision, the computer will display a graph of "force vs. time," as recorded by each force sensor.
    1. If the graphs do not appear, reverse the triggering.
    2. After hitting the "Collect" button, no data is actually recorded until one of the force sensors records a value above (or below) a certain trigger level. However, if the trigger level is set to a positive value and the force sensor is only giving negative force values, or vice versa, the computer will never receive the signal telling it to record data.
    3. To check, or reverse, the trigger setting, press the "Data Collection" icon (immediately to the left of the "Zero" button) and select the "Triggering" tab.
  9. The two options used in this experiment are "Increasing across 0.2 N" and "Decreasing across -0.2 N." If one of these settings is not causing the necessary triggering, switch to the other.
    1. In the second collision, the stationary cart should have 2-3 times the mass of the cart that is moving prior to the collision. To achieve this, add one or more weights to the stationary cart. Repeat the process (see the steps below).
    2. Designate the higher-mass cart to be stationary prior to the collision.
    3. Hit the "Collect" button and push the lower-mass cart toward the higher-mass cart.
    4. The computer will display the two "force vs. time" graphs.

In the third collision, the cart that moves prior to the collision should have 2-3 times the mass of the stationary cart. Achieve this by transferring the extra weight(s) from one cart to the other. Repeat the process of carrying out the collision and collecting the data.

2. Pushing and Pulling Situations

  1. Replace the rubber bumpers on each force sensor with hooks.
  2. Hook the carts together to allow one cart to push or pull the other cart.
  3. Reverse the triggering condition, as described in step 1.8.
  4. Start with carts of equal mass.
  5. Hit the "Collect" button.
  6. Either pull or push one of the carts so that it pulls or pushes the other cart, respectively, or rock it back and forth so that there both pulling and pushing occur.
  7. Give the cart being pulled and/or pushed 2-3 times the mass of the other cart. Repeat the data collection process.
    1. Record the "force vs. time" data for this pushing/pulling scenario.
  8. Give the cart doing the pulling and/or pushing 2-3 times the mass of the other cart. Repeat the data collection process.
    1. Record the "force vs. time" data in this pushing/pulling scenario.

Newton's laws of motion are the basis for classical mechanics and describe the relationship between an object and the forces acting upon it.

For example, when a rocket is at rest on the launchpad before launch, the rocket and the ground exert equal-and-opposite forces on one another. To take off, or when the rocket is in space, the expanding gas from the burning fuel pushes against the rocket and propels it forward. Less apparent, however, is that the rocket pushes against the gas at the same time. These simple phenomena obey Newton's laws of motion, though the forces at work may not be obvious because forces are not always visible.

This video will introduce the basics of Newton's laws of motion, and then demonstrate the concept through a series of experiments measuring the forces between two wheeled carts in various situations.

Newton's laws of motion consist of three key laws. The first law is the most simple, and states that an object at rest stays at rest, unless acted upon by a force. Similarly, an object in motion stays in motion unless acted upon by a force. Specifically, if the net forces on the object are zero, the velocity of the object is constant, whether the velocity is zero or not. However, an applied force, such as kicking the ball or hitting the wall, causes the velocity of the object to change.

Newton's second law states that the rate of change of an objects velocity, called acceleration, is directly proportional to the force applied to it. The proportionality factor is the mass of the object itself.

In other words, if an object is accelerating, there is a net force on it. This law is consistent with the first law, where the rate of change of an object's velocity-its acceleration- is zero when there is no net force applied.

Finally, Newton's third law states that the forces of two objects acting upon each other are equal in magnitude but opposite in direction

This behavior is often hard to understand. For example, when two objects of different masses collide, it is often assumed that the more massive object exerts a larger force than the less massive object. However, the forces are equal and opposite.

Newton's third law is commonly expressed with the phrase, "for every action there is an equal and opposite reaction." To be specific, the forces between two interacting objects are called "action-reaction pairs," which are equal in magnitude and opposite in direction.

But the responses of the objects-that is, their accelerations-may not be equal. This is because acceleration is inversely proportional to mass according to Newton's second law.

Consider what happens when a very large truck collides with a very small car. If action and reaction refer to the impact forces between them, then indeed the action does produce an equal and opposite reaction. But because of the significant differences in masses between truck and car, the effects of these forces are very different. The car rebounds catastrophically while the much more massive truck hardly changes course.

Now that the principles of Newton's laws of motion have been presented, let's take a look at the behavior of moving objects, and relate their behavior to Newton's third law of motion.

The following experiments use two wheeled carts, which slide on a long, low friction track.

Each cart is equipped with a force sensor connected to a computer interface for recording data. Each sensor is positioned to strike the sensor of the other cart during a collision, or to push or pull on the sensor of the other cart as they slide on the track.

Before starting the collision experiments, the force sensors must be set up for impact and configured for the expected level of force. First, screw a rubber bumper onto the plunger of each force sensor. Locate the slide switch on top of the force sensor. Set this switch to the 50 Newton position for each sensor.

The "Collect" button, which looks like a green arrow, starts data collection. Before each experiment, press the button next to this green arrow to zero the force sensor.

Zero both force sensors then check them to make sure the positive direction for each is defined to the right. Push in the sensor with the plunger that points right. The force reading should be positive.

Push in the sensor with the plunger that points left. The force reading should be negative. If both force readings are wrong, then reverse the positions of the carts.

If only one reading is wrong, then go to the "Experiment" menu, and select "Setup Sensors." Choose the appropriate force sensor and select "Reverse Direction."

After the force sensors have been configured correctly, the apparatus is ready for the first experiment, which uses carts of equal mass. Choose one cart to be stationary at the start of the test.

Zero both force sensors then press the "Collect" button to start data recording. Push and release the other cart so it slides on its own and collides with the stationary cart.

After impact, the computer displays a plot of the "force vs. time" recorded by each sensor. Magnitudes of peak force should be between 8 and 20 Newtons. If the peak force is outside this range, then repeat the experiment and adjust how hard the cart is pushed.

When carts with equal mass collide, this plot shows that the forces they experience are equal and opposite. Because acceleration equals force divided by mass, each cart accelerates with the same magnitude, but in opposite directions.

The second collision experiment repeats the first experiment but with carts of unequal mass. Choose one cart to be stationary and load it with one or more weights so it has 2 to 3 times the mass of the moving cart.

Zero both force sensors, press the "Collect" button and repeat the collision experiment by pushing the cart without weights into the weighted cart

When the less massive moving cart collides with the more massive, stationary one, they rebound with very different speeds. Despite appearances, the magnitudes of the forces are actually equal, as the plots clearly show. This behavior may be confusing but it is because the less massive cart experiences greater acceleration than the more massive one, again because acceleration equals force divided by mass.

Next, transfer the weights from the stationary cart to the moving cart to reverse the roles of the carts. Repeat the experiment with the moving cart being more massive and the stationary cart being less massive. Zero both force sensors, and press the "Collect" button. Repeat the experiment by pushing the weighted cart into the un-weighted one.

As with the previous experiment, the two carts rebound with very different speeds, because of their different masses. However, the impact forces still have equal magnitudes. So, regardless of whether the carts have equal or different masses, the collision forces are always equal in magnitude and opposite in direction.

Newton's third law of motion applies not only to collisions, but also to all situations where two objects interact.

Newton's third law also applies to the pushing and pulling interactions between two objects. To examine this phenomenon, the cart experiment was modified by replacing the rubber bumpers on the force sensors with hooks, and then hooking the carts together. The triggering condition was also reversed in the data collection software.

When carts of equal mass pushed and pulled the other, the forces were equal and opposite, despite the changing direction of motion. When two carts of unequal mass were pushed and pulled the phenomenon still holds true.

Physicists trying to understand planet formation often study collisions. In this example, dust particles were prepared to simulate collisions in the early solar system. The particles were dropped, and their collision recorded.

The colliding particles exerted forces against each other, which were equal in magnitude and opposite in direction. When both objects remained intact, the impact forces caused them to rebound.

You've just watched JoVE's introduction to Newton's laws of motion. You should now understand the basics of the three laws, how they describe motion and forces on objects. Thanks for watching!

Results

Newton's third law states that whenever two objects interact, the second object exerts a force on the first object that is equal in magnitude and opposite in direction to the force the first object exerts on the second. This is simple to state, but it can be hard to accept. For example, it is often assumed that the force a larger object exerts on a smaller object is larger than the force the smaller object exerts back on the larger object.

Figure 2
Figure 2. Result of the first collision. The forces experienced by the carts are equal and opposite.

Figure 3
Figure 3. Result of the second collision. The forces experienced by the carts are equal and opposite.

Figure 4
Figure 4. Result of the third collision. The forces experienced by the carts are equal and opposite.

Figure 5
Figure 5. Result of the first pushing/pulling situation. The forces experienced by the carts are equal and opposite.

Figure 6
Figure 6. Result of the second pushing/pulling situation. The forces experienced by the carts are equal and opposite.

Figure 7
Figure 7. Result of the third pushing /pulling situation. The forces experienced by the carts are equal and opposite.

Applications and Summary

The concept addressed in this experiment, namely that, in all interactions, the force one object applies to another is equal in magnitude and opposite in direction to the force applied by the second object back on the first, has many applications. For example, (1) the gravitational force the Sun applies to the Earth is equal and opposite to the gravitational force the Earth applies to the Sun. (2) The gravitational force the Earth applies to the Moon is equal and opposite to the gravitational force the Moon applies to the Earth. (3) The gravitational force the Earth exerts on an apple is equal and opposite to the gravitational force the apple applies to the Earth. (4) In a collision, such as that between a car and a truck on the street or that between two football players, the forces are always equal and opposite, no matter how the masses compare. (5) When a person stands on a floor or sits on a chair, the force exerted on that person by the floor or the chair is equal and opposite to the force the person exerts on the floor or chair.

Transcript

Tags

Newton's Laws Of Motion Classical Mechanics Object Forces Rocket Launchpad Equal-and-opposite Forces Expanding Gas Burning Fuel Propels Forward Push Against Gas Simple Phenomena Visible Forces Basics Of Newton's Laws Of Motion Experiments Wheeled Carts Three Key Laws Object At Rest Object In Motion Net Forces Constant Velocity Applied Force Change In Velocity Acceleration

Get cutting-edge science videos from JoVE sent straight to your inbox every month.

Waiting X
Simple Hit Counter