Name: tracking reaction kinetics with light and pressure
Uploaded: 2020-09-24T15:06:50.000Z
Duration: 3 min 9 s
Channel: JoVE

K12 Standards

Texas Essential Knowledge and Skills

High School

Chemistry and Physics

IPC.7

IPC.7.F

Measuring Reaction Rates

يمكن دراسة معدلات التفاعل،بتحديد التغير في تركيز المواد المتفاعلة أو النواتج،كدالّة على الزمن. يمكن قياس التغيرات في التركيز بواسطة تقنيات تجريبية،كالاستقطاب،والتحليل الطيفي،أو قياسات الضغط. يستخدم الاستقطاب،ضوءاًمستقطبًا-مستويًا مع مجال كهربائي موجّه علي سطح مستو واحد.و هو يقيس قدرة المركّبات على تدوير الضوء المستقطب،والتي تعتمد على البنية الجزيئية للمركب الموجود. لنتأمل التحلل المائي للسكروز،الذي ينتج عنه غلوكوز وفركتوز. يُستخدم جهاز قياس الاستقطاب،لقياس درجة دوران ضوء مستقطب-مستوي،يمر عبر محلول السكروز المتفاعل.السكروز يسبب دورانًا باتجاه عقارب الساعة،بينما الغلوكوز والفركتوز يسببان دورانًا بعكس عقارب الساعة. بقياس درجة دوران الضوء عند فترات زمنية معينة،يمكن حساب التركيز النسبي لكل من السكروز،والغلوكوز،والفركتوز ويمكن كذلك تحديد معدل التفاعل. كما يمكن قياس معدلات التفاعل باستخدام طرق التحليل الطيفي،بالاستفادة من قدرة المواد المتفاعلة والنواتج على امتصاص الضوء من موجات محددة الطول.كلما زاد تركيز المادة المراد حسابها،أصبح امتصاصها للضوء أشدّعلى سبيل المثال،غاز الهيدروجين عديم اللون يتفاعل مع بخار اليود البنفسجي ليشكل يوديد الهيدروجين عديم اللون. بخار اليود يمتص الضوء في المنطقة بين الخضراء-الصفراء ويعكس ضوء بنفسجيًا. أثناء التفاعل،جهاز قياس الطيف الضوئي يقيس كمية الضوء التي امتصتها العينة ويحلل الضوء الذي انبعث.وعليه فأثناء حدوث التفاعل،فإن التناقص في تركيز بخار اليود يلاحظ من خلال تناقص امتصاص الضوء بين الأخضر-الأصفر. باستخدام قانون بير-لامبرت،كثافة الضوء الممتص،عند نقاط زمنية مختلفة يمكن حسابها،ويمكن أن نعزوها إلى التغير في التركيز. وبدلًا عن ذلك،إذا كانت إحدى المواد المتفاعلة أو النواتج غازية،تُستخدم حسابات الضغط لتحديد معدل التفاعل عبر مراقبة التغيرات في الضغط.على سبيل المثال،أثناء تحلل بيروكسيد الهيدروجين،يُدرس معدل التفاعل باستخدام مانومتر لمراقبة ضغط غاز الأكسجين المنبعث. ومع سير التفاعل ونشوء مزيد من غاز الأكسجين،يزداد الضغط. باستخدام معادلة الضغط النموذجية،تُحول قيم الضغط التي يتم تسجيلها عند نقاط مختلفة إلى قيم تركيز.التغير في التركيز كدالّة على الزمن يُستخدم لتحديد معدل التفاعل. في التفاعلات الطويلة،يمكن أخذ عينات أو اجزاء،من خليط التفاعل علي فترات زمنية منتظمة. فتقاس مستويات التركيز النسبية،باستخدام تقنيات أساسية،مثل الفصل الكروماتوجرافي،أو مطيافية الكتلة،أو المعايرة،لحساب معدلات التفاعل.

قياس معدّلات التفاعل

يكتشف مقياس الاستقطاب تطبيقًا في الحركية الكيميائية لقياس تركيز وحركية تفاعل المواد النشطة بصريًا أثناء تفاعل كيميائي. تتمتع المواد الفعالة بصريًا بالقدرة على تدوير مستوى استقطاب الضوء المستقطب خطيًا الذي يمر عبرها — ميزة يُدعى الدوران البصري. يُعزى النشاط البصري إلى التركيب الجزيئي للمواد. يكون الضوء العادي أحادي اللون غير مستقطب ويمتلك اهتزازات في المجال الكهربائي في جميع المستويات الممكنة المتعامدة مع اتجاه انتشاره. وعندما يمر ضوء غير مستقطب عبر مستقطب ، ينبثق ضوء مستقطب يحافظ على التذبذبات في مستوى واحد. تحدد أداة مقياس الاستقطاب اتجاه استقطاب الضوء أو الدوران الناتج عن مادة نشطة بصريًا. في مقياس الاستقطاب ، يتم إدخال الضوء المستقطب إلى أنبوب يحتوي على محلول التفاعل ، ويمكن متابعة التفاعل دون الإخلال بالنظام. إذا كانت العينة تحتوي على مواد بصرية غير نشطة ، فلن يكون هناك تغيير في اتجاه مستوى الضوء المستقطب. سيكون الضوء مرئيًا بنفس الشدة على شاشة المحلل ، وستقرأ زاوية قراءة الدوران (ɑ) درجة صفر. ومع ذلك، فإن وجود مركبات نشطة بصريًا في عينة التفاعل يتسبب في دوران مستوى الضوء المستقطب المار. سيكون الضوء الخارج أقل سطوعًا. يجب تدوير محور جهاز المحلل في اتجاه عقارب الساعة (دكسترروتوري) أو عكس اتجاه عقارب الساعة (ليفوروتوري) لمراقبة الحد الأقصى من السطوع. يعتمد الاتجاه الذي يجب أن يدور فيه المحلل على طبيعة المركب الموجود. يتناسب الدوران البصري المقاس مع تركيز المواد الفعالة بصريًا الموجودة في العينة. من خلال تحليل قياسات زاوية الدوران في نقاط زمنية مختلفة ، يمكن تحديد تركيزات المركبات النشطة بصريًا كدالة زمنية. قياس الطيف كثيرًا ما يتم استخدام التقنيات التجريبية البصرية مثل قياس الطيف لمراقبة التفاعلات الكيميائية وتأمين المعلومات الكمية عن حركية التفاعل. باستخدام مقياس الطيف، يتم جعل ضوء الطول الموجي المحدد يمر عبر عينة متفاعلة. قد تمتص الجزيئات أو المركبات (سواء كانت مادة متفاعلة أو منتج) داخل العينة بعض الضوء أثناء نقل الكمية المتبقية ، والتي يتم قياسها بواسطة كاشف. تعتمد كمية الضوء الممتص على تركيز المركب أو الجزيء محل الاهتمام. على سبيل المثال ، كلما زاد تركيز المركب، زادت امتصاصه. من الامتصاصية، ستكون الأداة قادرة على تحديد تركيز المركب محل الاهتمام. في عينة متفاعلة ، يحسب الامتصاص الذي يتم قياسه على فترات دورية تركيزات المادة المتفاعلة أو المنتج كدالة زمنية. قياسات الضغط بالنسبة للتفاعلات التي تشتمل على مواد ذات طور غازي ، فإن حركية التفاعل متبوعة بقياس التغيرات في عدد مولات الغازات كدالة للتغيرات في الضغط. يمكن توصيل الإعدادات التجريبية لتفاعل الطور الغازي بمقياس ضغط يمكنه قياس ضغط مادة مفاعلة غازية أو منتج. مع تقدم التفاعل ، ينخفض ​​ضغط المواد المتفاعلة ، و (أو) المنتجات' يزيد الضغط. يمكن قياس ذلك بواسطة مقياس الضغط كدالة للوقت. من خلال تطبيق قانون— الغاز المثالي يتناسب تركيز الغاز مع ضغطه— الجزئي يمكن حساب معدل التفاعل الكيميائي.

يجد قياس الاستقطاب تطبيقا في الحركية الكيميائية لقياس تركيز وحركية تفاعل المواد النشطة بصريا أثناء المواد الكيميائية ...

Education

JoVE Core

Chemistry

الكيمياء

واحد

Chemical Kinetics

الحركية الكيميائية

KEY TERMS AND CONCEPTS

المصطلحات والمفاهيم الأساسية

tracking reaction kinetics with light and pressure

Reaction kinetics can be tracked with polarimetry, spectrometry, and pressure measurements. These methods let scientists follow a reaction without disturbing the sample. They also help determine how reactant or product concentrations change over time.

Polarimetry is used for optically active substances. These substances rotate the plane of polarized light, which is called optical rotation. The effect comes from molecular structure. Normal monochromatic light is unpolarized, but after it passes through a polarizer, it becomes linearly polarized with vibrations in one plane.

In a polarimeter, this plane-polarized light is sent through a tube of reacting solution. The instrument then shows how much the light has been rotated. If the sample contains optically inactive substances, the light keeps the same orientation, the analyzer screen stays equally bright, and the rotation angle is zero degrees. If optically active compounds are present, the light becomes dimmer and the analyzer must be turned clockwise or counter-clockwise to restore maximum brightness. Clockwise rotation is dextrorotatory, and counter-clockwise rotation is levorotatory.

The amount of optical rotation is proportional to the concentration of the optically active substance in the sample. By taking rotation readings at different times, the concentration can be followed as the reaction proceeds. Spectrometry gives similar kinetic information by passing light of a specific wavelength through a reacting sample. Some of the light is absorbed by the reactant or product, and a detector measures the remaining light. Higher concentration gives higher absorbance, so repeated absorbance measurements can be used to find concentration over time.

Pressure measurements are useful for gas-phase reactions. A manometer can be connected to the reaction setup to monitor the pressure of a gaseous reactant or product. As the reaction goes on, reactant pressure may decrease and product pressure may increase. Using the ideal gas law, the concentration of a gas is proportional to its partial pressure, so reaction rate can be calculated from the pressure change.

Tracking Reaction Kinetics with Light and Pressure

tracking-reaction-kinetics-with-light-and-pressure

reaction rate

Measuring reaction rates shows how fast reactants are used up or products are formed over time. The rate of reaction is the change in the amount of a reactant or product per unit time. Because of that, scientists measure how a property changes as the reaction proceeds and connect that change to reactant or product amounts. For reactions that make or use a gas, the rate can be followed by changes in volume or pressure. A rate expression is the mathematical way to write how concentration changes...

measuring reaction rates

Reaction kinetics can be tracked with polarimetry, spectrometry, and pressure measurements. These methods let scientists follow a reaction without disturbing the sample. They also help determine how reactant or product concentrations change over time. Polarimetry is used for optically active substances. These substances rotate the plane of polarized light, which is called optical rotation. The effect comes from molecular structure. Normal monochromatic light is unpolarized, but after it passes...

concentration and rate law

Reaction Order from Concentration

Reaction order from concentration shows how reactant amounts affect reaction rate. Rate laws, also called differential rate laws or rate equations, are mathematical expressions that connect reaction rate with the concentrations of reactants. For a generic reaction a A + b B → products, the rate law can be written using the reactant concentrations [A] and [B] and a rate constant k. In a rate law, k is the rate constant for one specific reaction at one specific temperature. The exponents m and n...

determining order of reaction

Finding Rate Law from Initial Rates

Rate laws connect the speed of a chemical reaction to the concentration of its reactants. The rate constant, k, and the reaction orders are not taken from the chemical equation. They are found experimentally by watching how the rate changes when the reactant concentrations change. One common way to do this is the method of initial rates. In this method, several trials are run with different starting concentrations. The measured rates are then compared to determine the reaction orders and,...

the integrated rate law: the dependence of concentration on time

the-integrated-rate-law-the-dependence-of-concentration-on-time

Reading Reaction Progress with Integrated Laws

Integrated rate laws connect reaction concentration to time. They help show how much reactant or product is present after a certain period. They can also help estimate how long a reaction must run to reach a given extent. A common use is finding how long radioactive material must be stored before its radioactivity drops to a safe level. These equations come from the differential rate law after it is integrated with respect to time. For a first-order reaction, where rate = k[A], the integrated...

half-life of a reaction

Reaction Half-Life in Kinetics

Reaction half-life is the time needed for half of a reactant to be consumed. After each half-life, half of the remaining reactant is used up. A hydrogen peroxide decomposition example shows this pattern clearly. The concentration drops from 1.000 M to 0.500 M in the first 6.00 hours, then to 0.250 M in the next 6.00 hours, and then to 0.125 M in the third period. Each later 6.00-hour interval removes half of what is left. For first-order reactions, the half-life does not depend on the reactant...

temperature dependence on reaction rate

Collision Theory and Reaction Speed

Collision theory explains why reaction speed depends on how particles collide. Atoms, molecules, or ions must come close together before they can react. The theory says the reaction rate depends on the collision rate, the orientation of the colliding species, and whether the collision has enough energy for bonds to change. A gas-phase reaction between carbon monoxide and oxygen shows why orientation matters. The molecules can collide in more than one way. If the oxygen side of carbon monoxide...

arrhenius plots

Determining Activation Energy from Temperature

The Arrhenius equation links activation energy and the rate constant, k, for chemical reactions. It is written as k = Ae−Ea/RT. In this equation, R is the ideal gas constant with a value of 8.314 J/mol·K, T is the temperature on the kelvin scale, Ea is the activation energy in J/mole, e is the constant 2.7183, and A is the frequency factor. The frequency factor depends on collision frequency and the orientation of reacting molecules. Experimental kinetic data can be used to find the activation...

reaction mechanisms

Elementary Steps in Reaction Mechanisms

Chemical reactions can happen in steps, and a balanced equation does not show the full path at the molecular level. A reaction mechanism, also called a reaction path, gives the step-by-step process that explains how reactants become products. The decomposition of ozone is one example of a reaction that can be described by a sequence of steps. Each step in a mechanism is an elementary reaction. These elementary reactions happen in order, and when they are added together, they give the balanced...

rate-determining steps

Reaction Bottlenecks in Chemical Kinetics

Reaction bottlenecks help explain rate-determining steps in multistep reaction mechanisms. In a mechanism with several elementary steps, one step is often much slower than the others. That slowest step is called the rate-limiting step, or rate-determining step. A reaction cannot move faster than its slowest step, so this step controls the overall reaction rate. The idea is like traffic on a four-lane freeway with one lane closed. Cars can only move as fast as the bottleneck allows. In the same...

catalysis

Catalyst Action in Reaction Rates

Catalysts change the rate of a chemical reaction by giving it a faster path. A catalyst increases reaction rate without being consumed during the process. Its effect is often explained with reaction mechanisms and energy diagrams. For an endothermic reaction, the reactants and products start and end at the same energies in both cases. The uncatalyzed path is a one-step mechanism with one transition state. The catalyzed path follows a different mechanism with two transition states and a lower...

enzymes

Enzyme Action and Inhibition

Enzymes are biological catalysts that speed up many reactions in living organisms. They help control cellular metabolism by lowering the activation energy needed for biochemical reactions. When activation energy drops, reaction rates can increase. Enzyme problems can also lead to serious disease. A genetic abnormality that causes G6PD, or glucose-6-phosphate dehydrogenase, deficiency can disrupt the pathway that supplies NADPH to cells. In red blood cells, this can reduce glutathione and...

key terms and concepts

See how polarimetry, spectrometry, and pressure measurements monitor reaction kinetics by tracking optical rotation, absorbance, and gas pressure changes.

Tracking Reaction Kinetics with Light and Pressure | JoVE K12

chemistry

JoVE Core Chemistry brings general chemistry concepts to life using concise and easy-to-understand animated video lessons. Plus, in the scientist-in-action videos, we demonstrate classical and original research experiments performed in today's laboratories worldwide.

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Matter and its Interactions

PS.Chm.5.1

Pennsylvania State Academic Standards

Physical Science

Chemical Reactions

3.2.9-12.D

3.2.9-12.E

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Interactions Of Matter

Chemical reactions

Virginia  Standards of Learning

HIgh School

CH.7

CH.7.e

Minnesota Academic Standards in Science

3.2.1 9C.3.1.1.2

Alabama Course of Study Science

Matter and Its Interactions: Energy

9-12.C.3.3.d

Next Generation Science Standards

Matter and Its Interactions

HS-PS1-4

HS-PS1-5

Florida Department of Education

SC.912.P.12

SC.912.P.12.12

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Chemical Reactions

HS-PS1-5.

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

Elements: Chemical Symbols and Isotopes

A chemical symbol is an abbreviation used to indicate an element or an atom of an element. For example, the symbol for mercury is Hg. The same symbol is ...

Ions and Ionic Charges

In ordinary chemical reactions, the nucleus &mdash; which contains the protons and neutrons of each atom and thus identifies the element &mdash; remains ...

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

Atomic Mass

Atoms &mdash; and the protons, neutrons, and electrons that compose them &mdash; are extremely small. For example, a carbon atom weighs less than 2 ...

Molar Mass

The identity of a substance is defined not only by the types of atoms or ions it contains but by the quantity of each type of atom or ion. For example, ...

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

Types of Chemical Bonds

Chemical bonding theories were pioneered by American chemist Gilbert&#xA0;N. Lewis. He developed a model called the Lewis model to explain the type and ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&#xA0;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

trends-in-lattice-energy-ion-size-and-charge

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&#xA0;

Electronegativity values of ...

bond-polarity-dipole-moment-and-percent-ionic-character

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

Bonding in Metals

Metallic bonds are formed between two metal atoms. A simplified model to describe metallic bonding has been developed by Paul Dr&#xFC;de called the ...

Model basic atomic structure and relate an element's atomic structure to its bonding, reactivity, and placement on the Periodic Table.

IPC.7.A

physical-and-chemical-properties-of-matter

Physical and Chemical Properties of Matter

The characteristics that enable us to distinguish one substance from another are called properties.

Physical Properties of Matter

A physical property is ...

atomic-radii-and-effective-nuclear-charge

Atomic Radii and Effective Nuclear Charge

The elements in groups of the periodic table exhibit similar chemical behavior. This similarity occurs because the members of a group have the same number ...

Ionic Radii

Ionic radius is the measure used to describe the size of an ion. A cation always has fewer electrons and the same number of protons as the parent atom; it ...

Ionization Energy

The amount of energy required to remove the most loosely bound electron from a gaseous atom in its ground state is called its first ionization energy ...

Electron Affinity

The electron affinity (EA) is the energy change for adding an electron to a gaseous atom to form an anion (negative ion).



This process can be either ...

Alkali Metals

Group 1 elements are soft and shiny metallic solids. They are malleable, ductile, and good conductors of heat and electricity. The melting points of the ...

Halogens

Group 17 elements, known as halogens, are nonmetals. At room temperature, fluorine and chlorine are gases, bromine is a liquid, and iodine a solid. ...

Noble Gases


The elements in group 18 are noble gases (helium, neon, argon, krypton, xenon, and radon). They earned the name &ldquo;noble&rdquo; because they were ...

Use patterns within the Periodic Table to predict the relative physical and chemical properties of elements.

IPC.7.B

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

Phase Transitions

Whether solid, liquid, or gas, a substance&#39;s state depends on the order and arrangement of its particles (atoms, molecules, or ions). Particles in the ...

phase-transitions-vaporization-and-condensation

Phase Transitions: Vaporization and Condensation

The physical form of a substance changes on changing its temperature. For example, raising the temperature of a liquid causes the liquid to vaporize ...

Phase Transitions: Melting and Freezing

Heating a crystalline solid increases the average energy of its atoms, molecules, or ions, and the solid gets hotter. At some point, the added energy ...

phase-transitions-sublimation-and-deposition

Phase Transitions: Sublimation and Deposition

Some solids can transition directly into the gaseous state, bypassing the liquid state, via a process known as sublimation. At room temperature and ...

Melting Points

Melting Points in Organic Chemistry
The melting point of a compound is the temperature at which the solid phase transitions into the liquid phase at a ...

Boiling Points

Source: Lara Al Hariri at the University of Massachusetts Amherst, MA, USA

	Preparation of the LaboratoryExpand
	Here, we show the laboratory preparation ...

Explain how physical and chemical properties of substances are related to their usage in everyday life such as in sunscreen, cookware, industrial applications, and fuels.

IPC.7.C

Emission Spectra

When solids, liquids, or condensed gases are heated sufficiently, they radiate some of the excess energy as light. Photons produced in this manner have a ...

Metal Flame Emission

Metal Flame Emission
Flame testing is an analytical technique where a sample is placed in a flame, and the characteristic flame color is used to identify ...

Atomic Orbitals

An atomic orbital represents the three-dimensional regions in an atom where an electron has the highest probability to reside. The radial distribution ...

The Pauli Exclusion Principle

The arrangement of electrons in the orbitals of an atom is called its electron configuration. We describe an electron configuration with a symbol that ...

The Energies of Atomic Orbitals

In an atom, the negatively charged electrons are attracted to the positively charged nucleus. In a multielectron atom, electron-electron repulsions are ...

Explain how electrons can transition from a high energy level to a low energy state, emitting photons at different frequencies for different energy transitions.

IPC.7.D

The de Broglie Wavelength

In the macroscopic world, objects that are large enough to be seen by the naked eye follow the rules of classical physics. A billiard ball moving on a ...

The Uncertainty Principle

Werner Heisenberg considered the limits of how accurately one can measure properties of an electron or other microscopic particles. He determined that ...

The Quantum-Mechanical Model of an Atom

Shortly after de Broglie published his ideas that the electron in a hydrogen atom could be better thought of as being a circular standing wave instead of ...

Quantum Numbers

It is said that the energy of an electron in an atom is quantized; that is, it can be equal only to certain specific values and can jump from one energy ...

Balmer Series

The Bohr Model
Niels Bohr proposed a model for the hydrogen atom in 1913 that described discrete energy states are associated with a fixed electron orbit ...

Explain how atomic energy levels and emission spectra present evidence for the wave particle duality.

IPC.7.E

Science concepts. The student knows that relationships exist between the structure and properties of matter. The student is expected to:

Tracking Reaction Kinetics with Light and Pressure

Description

Transcript

More videos by Standards