Name: quadrupole, tof, and ion trap analyzers
Uploaded: 2024-04-04T10:51:34.000Z
Duration: 1 min 19 s
Channel: JoVE

يتكون محلل الكتلة رباعي الأقطاب من أربعة قضبان متوازية ، يتم تطبيق جهد تيار مستمر وجهد تيار متردد بتردد راديوي.
هنا ، تتسبب شدة المجال في صدى الأيونات ذات القيم المعينة m / z فقط مع المجال وضرب الكاشف. توفر هذه المحللات دقة منخفضة.
محلل شائع آخر هو محلل وقت الرحلة ، حيث يتم قياس وقت رحلة الأيونات من المصدر عبر الأنبوب الخطي الخالي من المجال إلى الكاشف.
جميع الأيونات لها نفس الطاقة الحركية تقريبا ، لذا فإن الأيونات الأخف وزنا لها سرعات أعلى ، مما يؤدي إلى أوقات طيران أقصر.
لتحسين الدقة ، يتم استخدام العاكسات أو العاكسات الأيونية. إنها تبطئ الأيونات الأكثر نشاطا ، وتصحح اختلافات الطاقة الحركية بين الأيونات من نفس الكتلة.
بديل آخر هو مصيدة الأيونات رباعية الأقطاب ثلاثية الأبعاد ، والتي تتكون من قطب كهربائي حلقي وزوج من أقطاب نهاية الغطاء الكهربائي. يحبس جهد التردد الراديوي الأيونات التي تتأرجح في الحلقة.
عن طريق زيادة جهد التردد الراديوي ، تستقر الأيونات الأثقل تدريجيا وتخرج بشكل انتقائي إلى الكاشف.

محلل الكتلة: الأنواع الشائعة

Mass Analyzers: Common Types

<div style="direction:rtl">
يتكون محلل الكتلة الرباعي من أربعة قضبان معدنية أسطوانية مرتبة في الماس تحمل جهد التيار المستمر وجهد التيار المتردد للتردد الراديوي. تعتمد حركة الأيونات عبر القطب الرباعي على شدة المجال، مما يتسبب فقط في رنين الأيونات ذات m/z معينة بنجاح وضرب الكاشف بقوة مجال معينة. على الرغم من أن معدل الإرسال لهذه المحللات مرتفع، إلا أن التركيب العنصري الدقيق للعينة لم يتم تحديده بسبب الدقة المنخفضة؛ ومع ذلك، فهي فعالة من حيث التكلفة. الدقة النموذجية للمحلل الرباعي هي 1 Da (أو 1 u).

في محلل وقت الرحلة (TOF)، يتم قياس زمن رحلة أيون من المصدر عبر أنبوب الانجراف الخطي الخالي من المجال إلى الكاشف بالميكروثانية، ويتم تحويل هذه المرة إلى قيمة m/z. تدخل الأيونات إلى أنبوب الانجراف بنفس الكمية من الطاقة الحركية تقريبًا. وبناء على ذلك، تنتقل الأيونات ذات قيم m/z المختلفة بسرعات مختلفة وتصل إلى الكاشف في أوقات مختلفة. تنتقل الأيونات الأخف بسرعة أعلى، مما يؤدي إلى زمن طيران أقصر ودقة رديئة نسبيًا. يمكن أيضًا أن يتأثر القرار بسبب الاختلافات في كمية الطاقة الحركية المنقولة إلى الأيونات، مما يتسبب في اختلاف سرعات الأيونات التي لها نفس m/z. ولهذا السبب، يتم استخدام عاكس (أو مرآة أيونية) لزيادة مسافة السفر إلى الكاشف وإبطاء سرعة الأيونات. تواجه الأيونات الأكثر نشاطًا تباطؤًا أكبر، لذلك يقوم العاكس بتصحيح انتشار الطاقة الحركية ويوفر دقة أفضل بشكل عام. بالإضافة إلى ذلك، توفر أجهزة تحليل TOF حساسية عالية.

تتكون محللات مصيدة الأيونات ثلاثية الأبعاد من قطب كهربائي حلقي وقطبين كهربائيين. يحبس جهد التردد الراديوي الأيونات التي تتأرجح في الحلقة. تعمل زيادة جهد التردد الراديوي على تثبيت الأيونات الأثقل وإخراجها بشكل انتقائي إلى الكاشف عبر الفتحات الموجودة في الأغطية الطرفية. في حين أن محللات الكتلة الأخرى تسمح فقط لجزء صغير من الأيونات بالوصول إلى الكاشف، فإن مصيدة الأيونات الرباعية الأبعاد تمكن نصف الأيونات من الوصول إلى الكاشف، مما يجعل هذه المحللات أكثر حساسية. ومع ذلك، مع وجود عدد كبير من الأيونات المخزنة في مصيدة الأيونات، تؤدي تأثيرات الشحنة الفضائية إلى انخفاض الدقة.
</div>

يتكون محلل الكتلة رباعي الأقطاب من أربعة قضبان متوازية ، يتم تطبيق جهد تيار مستمر وجهد تيار متردد بتردد راديوي.
هنا ، الحقل ...

Education

JoVE Core

Analytical Chemistry

الكيمياء التحليلية

Unit 1

الوحدة الأولى

Principles of Mass Spectrometry

مبادئ مطيافية الكتلة

KEY TERMS AND CONCEPTS

المصطلحات والمفاهيم الأساسية

quadrupole, tof, and ion trap analyzers

Quadrupole, time-of-flight, and ion trap mass analyzers each separate ions in a different way. They are common tools in mass spectrometry and help sort ions by their mass-to-charge ratio, or m/z.

A quadrupole mass analyzer uses four cylindrical metal rods arranged in a diamond shape. The rods carry a direct current, or DC, voltage and a radio-frequency AC voltage. Ion motion depends on the field strength, so only ions with a certain m/z resonate and reach the detector at that setting. This analyzer has a high transmission rate and is cost-effective, but its low resolution means it does not determine the exact elemental composition of a sample. Its typical resolution is about 1 Da, or 1 u.

A time-of-flight, or TOF, analyzer measures how long ions take to travel from the source through a field-free drift tube to the detector. The flight time is measured in microseconds and converted to an m/z value. Ions enter the tube with about the same kinetic energy, so lighter ions move faster and arrive sooner. That shorter flight time can limit resolution. Resolution can also drop if ions with the same m/z start with different kinetic energies and travel at different speeds.

To improve TOF performance, a reflectron, or ion mirror, can be used. It increases the distance to the detector and slows the ions down. More energetic ions experience a greater slowdown, so the reflectron corrects kinetic energy spread and improves resolution overall. TOF analyzers also offer high sensitivity.

Three-dimensional quadrupole ion-trap analyzers use a ring electrode and two endcap electrodes. A radio-frequency voltage traps the ions so they oscillate in the ring. When the radio-frequency voltage increases, heavier ions become stabilized and are selectively ejected through apertures in the endcaps to the detector. Compared with other mass analyzers that allow only a small fraction of ions to reach the detector, the three-dimensional quadrupole ion trap can send about half of the ions to the detector, which makes it more sensitive. If too many ions are stored, space-charge effects reduce resolution.

Quadrupole, TOF, and Ion Trap Analyzers

mass spectrometry: overview

Mass Spectrometry and Molecular Identity

Mass spectrometry helps identify a compound by measuring its molecular mass and molecular formula. It does this by turning the analyte molecule into ions and then comparing ion abundance with mass-to-charge ratio. One common ionization method is electron ionization, or EI. In EI, high-energy electron beams strike analyte molecules in the gas phase. The beam removes an electron and leaves a molecular ion behind. A molecular ion is a radical cation, so it has a positive charge and an unpaired...

mass spectrometry: isotope effect

Isotope Peaks in Mass Spectra

Isotope peaks in mass spectra show how natural isotope mixtures change the signal of a molecule. Most elements occur as a mix of isotopes, which are atoms of the same element with different numbers of neutrons. Because isotopes have different masses, the same fragment can appear at more than one position in a spectrum. The mass of a molecule depends on which isotopes are present in its atoms. The size of each isotope peak also depends on how common those isotopes are in nature. Carbon is a...

mass spectrometry: molecular fragmentation overview

mass-spectrometry-molecular-fragmentation-overview

Mass Spectrometry Fragmentation Patterns

Mass spectrometry fragmentation patterns show how a molecular ion breaks apart after ionization. When a molecule loses an electron inside the mass spectrometer, its structure becomes unstable. The ion then fragments at bonds that often produce the most stable pieces. One common pattern is cleavage of a single bond in the molecular ion. This break forms a radical and a cation. The bond can split in more than one way, but the favored path is the one that gives the more stable carbocation rather...

mass spectrometers

How Mass Spectrometers Sort Ions

A mass spectrometer sorts charged ions by their mass-to-charge ratio and records their relative abundance. It turns vaporized analyte molecules into ions, separates them, and then measures the signal from each type of ion. The process begins in the ionization chamber. The analyte is in the gas phase inside a vacuum, and it is struck by high-energy electrons. The electrons have about 70 eV of energy, which is enough to remove an electron from the analyte and form a molecular ion. After...

mass spectrum

Reading Peaks in a Mass Spectrum

A mass spectrum shows the charged fragments in an analyte as peaks plotted by mass-to-charge ratio, or m/z. The x-axis gives the mass of each charged fragment divided by the number of charges it carries. The y-axis shows the relative abundance of each charged species based on the signal intensity recorded at the detector. The tallest peak is called the base peak. It is assigned an abundance of 100%, and the other peaks are scaled against it. The peak from the molecular ion is called the parent...

mass spectrum: interpretation

Decoding Molecular Ions in Mass Spectra

Mass spectra help scientists identify an unknown compound by finding the molecular ion peak. The molecular ion peak shows the mass of the intact molecule, but it is often weak or missing because high-energy electron beams cause strong fragmentation. When that happens, a soft-energy electron beam can be used to scan the spectrum and improve the molecular ion signal. Other ionization methods can also give a stronger molecular ion peak. Chemical ionization, field ionization, and desorption...

mass analyzers: overview

Mass Analyzers and Ion Separation

Mass analyzers separate ions by their mass-to-charge ratio, or m/z, in a mass spectrometer. After a sample is vaporized in the ionization chamber, it is hit with a high-energy electron beam. This creates a radical cation and also produces neutral molecules, radicals, and cations. Negatively charged accelerator plates then push the cations into the mass analyzer, where they are sent on to the detector. Several mass analyzer designs are commonly used. These include magnetic sector,...

mass analyzers: common types

Quadrupole, time-of-flight, and ion trap mass analyzers each separate ions in a different way. They are common tools in mass spectrometry and help sort ions by their mass-to-charge ratio, or m/z. A quadrupole mass analyzer uses four cylindrical metal rods arranged in a diamond shape. The rods carry a direct current, or DC, voltage and a radio-frequency AC voltage. Ion motion depends on the field strength, so only ions with a certain m/z resonate and reach the detector at that setting. This...

high-resolution mass spectrometry (hrms)

Mass Accuracy in HRMS Analysis

High-resolution mass spectrometry separates ions by very small differences in mass. This matters because atomic masses are not always exact whole numbers, even though they are often rounded for simple calculations. Atomic mass is usually estimated by adding the masses of protons and neutrons. In reality, the proton and neutron do not have exactly the same mass. That creates small differences when atomic masses are compared to the simplest hydrogen atom. Helium, for example, is made of 2...

mass spectrometry: complex analysis

Hyphenated Mass Spectrometry Methods

Mass spectrometry can be paired with separation methods to study complex mixtures. This combination is called a hyphenated method. It helps when a pure mass spectrum is too hard to read because a mixture causes too much fragmentation and too many overlapping signals. GC-MS is one common hyphenated method. GC stands for gas chromatography, which separates volatile, thermally stable compounds in narrow capillary columns before they enter the mass spectrometer. This approach is widely used in...

tandem mass spectrometry

MS/MS Scan Modes and Fragment Ions

Tandem mass spectrometry uses two or more mass analyzers in series to improve selectivity and lower chemical noise during analyte detection. A set of analyzers separated by an interaction cell lets the instrument break ions apart and study the fragment ions that form. Fragmentation happens in the interaction cell and can be caused in several ways. Collision-induced dissociation, or CID, uses inert gases such as nitrogen, argon, or helium. Other methods include surface-induced dissociation...

gas chromatography&ndash;mass spectrometry (gc&ndash;ms)

How GC-MS Separates and Identifies Compounds

Gas chromatography-mass spectrometry (GC-MS) separates compounds in a mixture and then identifies them. A gas chromatograph first splits the mixture into its parts. A mass spectrometer then analyzes each part on its own to determine molecular masses and molecular structures. The gas chromatograph uses a long, narrow capillary column. The inner wall of the column has a polysiloxane coating. This coating serves as the stationary phase. It has a high boiling point, low viscosity, and low polarity.

inductively coupled plasma&#8211;mass spectrometry (icp&#8211;ms): overview

inductively-coupled-plasmamass-spectrometry-icpms-overview

ICP-MS Sample Ionization and Detection

ICP-MS uses an inductively coupled plasma torch to turn samples into ions for mass analysis. Solid samples are first dissolved and volatilized before they enter the hot argon plasma. Solution samples are nebulized, which means they are converted into a fine spray, and then passed through the same plasma. Inside the plasma, the analytes break apart. Their atoms become positively charged ions, along with some molecular species. These positive ions are sent to the mass spectrometer, where they...

inductively coupled plasma-mass spectrometry (icp-ms): interferences

inductively-coupled-plasma-mass-spectrometry-icp-ms-interferences

ICP-MS Signal Interference Sources and Fixes

Inductively coupled plasma-mass spectrometry (ICP-MS) is a sensitive method for elemental analysis, but its spectra can be affected by interferences. These interferences can make the mass signal less accurate, even when the instrument is working well. Spectroscopic interferences happen when ions in the plasma have the same mass-to-charge ratio, or m/z, as the analyte ion. This group includes isobaric interferences, polyatomic ion interferences, and refractory oxide ion interferences. Isobaric...

key terms and concepts

Learn how quadrupole, TOF, and ion trap mass analyzers separate ions by m/z, and compare their resolution, sensitivity, and detection methods.

Quadrupole, TOF, and Ion Trap Analyzers | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Quadrupole, TOF, and Ion Trap Analyzers

Description

Transcript