Name: physical pendulum motion and inertia
Uploaded: 2023-05-16T08:18:41.000Z
Duration: 1 min 6 s
Channel: JoVE

K12 Standards

Florida Department of Education

High School

Physical Science

SC.912.P.10

SC.912.P.10.6

Physical Pendulum

ضع في اعتبارك علبة سقي معلقة من خطاف. عندما يتم إزاحته من نقطته المحورية ، فإنه يتأرجح على غرار البندول البسيط. علبة الري هي مثال على البندول المادي.
يمكن نمذجتها على أنها وزنه بالكامل يعمل في مركز كتلته ، والذي يتأرجح حول النقطة المحورية. لنفترض أن المسافة بين النقطة المحورية ومركز الكتلة تساوي L.
يرجع التذبذب إلى عزم الدوران المستعيد الناتج عن الجاذبية ، والذي يمكن حسابه. إذا كانت زاوية التذبذب صغيرة ، يتم تقريب عزم الدوران.
يمكن أيضا كتابته من حيث لحظة القصور الذاتي والتسارع الزاوي للبندول.
يعطي التعبيران معادلة للحركة التوافقية البسيطة، حيث يتم استبدال الكتلة بعزم القصور الذاتي واستبدال ثابت القوة بحاصل ضرب مكون من ثلاثة حدود.
لذلك ، يمكن تحديد التردد الزاوي ، ويمكن اشتقاق الفترة الزمنية.
بالنسبة للبندول البسيط ، تعطي لحظة القصور الذاتي التعبير المألوف للفترة الزمنية.

<ol>
	<li>يونغ ، إتش دي وفريدمان ، ر. (2012). الفيزياء الجامعية مع الفيزياء الحديثة. سان فرانسيسكو ، كاليفورنيا: بيرسون: القسم 14.6 ؛ الصفحات 455-456.</li>
	<li>OpenStax. (2019). جامعة الفيزياء المجلد 1. [نسخة الويب]. تم الاسترجاع من <a href = "https://openstax.org/books/university-physics-volume-1/pages/1-introduction" >https://openstax.org/books/university-physics-volume-1/pages/1-introduction</a>: القسم 15.4 ؛ الصفحات 766-768.</li>
</ol>

البندول الفيزيائي

<div style="direction:rtl">عندما يتدلى جسم صلب بحرية من نقطة محورية ثابتة ويتحرك فإنه يهتز بشكل مشابه للبندول البسيط ويعرف بالبندول الفيزيائي. يتم الحصول على الدورة والتردد الزاوي للبندول الفيزيائي باستخدام تقريب الزاوية الصغيرة ورسم التوازيات مع نظام الكتلة الزنبركية. تقريب الزاوية الصغيرة (sinθ=θ) صالح حتى حوالي 14°. عند التعامل مع الأنظمة المعقدة، فإن عزم القصور الذاتي الشامل يعد معلمًا مهمًا، لأنه يصف توزيع الكتلة حول النقطة المحورية. لحظة القصور الذاتي هي مقياس لمقاومة الجسم للحركة الدورانية. بالنسبة للبندول ذي التوزيع الكتلي المعقد، قد يكون حساب عزم القصور الذاتي مهمة صعبة وتستغرق وقتًا طويلاً. ومع ذلك، باستخدام مركز إطار الكتلة، يمكننا تبسيط هذه العملية الحسابية بشكل كبير. يتم تبسيط التوزيع الشامل لكتلة الجسم ولحظة القصور الذاتي الناتجة إلى فترتين: لحظة القصور الذاتي حول النقطة المحورية والمسافة بين النقطة المحورية ومركز الكتلة. يُظهر هذا التبسيط القوة الرائعة لاستخدام إطار عمل مركز الكتلة. يمكن إثبات أن حالة البندول الفيزيائي الحقيقي يمكن اختزالها إلى البندول البسيط المثالي باستخدام التعبير عن عزم القصور الذاتي للبندول البسيط. للبندولات الفيزيائية تطبيقات مفيدة. في الظروف القاسية، يمكن أن تتمايل ناطحات السحاب حتى مترين بتردد يصل إلى 20 هرتز بسبب الرياح العاتية أو النشاط الزلزالي. قامت العديد من الشركات بتطوير بندولات مادية يتم وضعها على قمة ناطحات السحاب. عندما تتأرجح ناطحة السحاب إلى اليمين، يتأرجح البندول إلى اليسار، مما يقلل من التأرجح. يمكن أيضًا استخدام البندول الفيزيائي لقياس تسارع الجاذبية.</div>

عندما يتدلى الجسم الصلب بحرية من نقطة محورية ثابتة ويتم إزاحته ، فإنه يتأرجح على غرار البندول البسيط ويعرف باسم ...

/files/media/science-education/science-education-thumbs/14719.jpg

Education

JoVE Core

Physics

الفيزياء

Unit 1

الوحدة الأولى

Oscillations

تذبذبات

KEY TERMS AND CONCEPTS

المصطلحات والمفاهيم الأساسية

physical pendulum motion and inertia

A physical pendulum is a rigid body that hangs from a fixed pivot point and swings when it is displaced. Its motion is similar to a simple pendulum. To describe that motion, physicists use the small-angle approximation, where sin θ ≈ θ. This approximation is valid up to about 14°.

The period and angular frequency of a physical pendulum can be found by comparing it with a spring-mass system. The mass moment of inertia is the key quantity that describes how the body’s mass is spread around the pivot point. Moment of inertia measures resistance to rotational motion. For a body with a complicated mass distribution, finding this value can take time.

The center of mass framework makes the calculation easier. It reduces the mass distribution problem to two terms: the moment of inertia about the pivot point and the distance from the pivot point to the center of mass. This approach shows how useful the center of mass model can be. A real physical pendulum can also be reduced to the ideal simple pendulum by using the simple pendulum moment of inertia expression.

Physical pendulums have practical uses. Very tall skyscrapers can sway up to two meters with a frequency of up to 20 Hz during strong winds or seismic activity. Some companies place physical pendulums on top of buildings to reduce that sway. As the skyscraper moves to one side, the pendulum swings to the other. Physical pendulums can also be used to measure the acceleration due to gravity.

Physical Pendulum Motion and Inertia

simple harmonic motion

Period and Frequency in Simple Harmonic Motion

Simple harmonic motion describes oscillatory motion when the net force follows Hooke's law. In this type of motion, the force acts toward the equilibrium position. If there is no damping from friction or other non-conservative forces, the oscillator moves with equal displacement on both sides of equilibrium. The period of a simple harmonic oscillator is found from the equation of motion. Period is the time for one complete oscillation. Frequency is the inverse of period, so the two values can...

/files/media/science-education/science-education-thumbs/12762.jpg

characteristics of simple harmonic motion

characteristics-of-simple-harmonic-motion

Simple Harmonic Motion: Period and Phase

Simple harmonic motion depends on how displacement, force, and acceleration work together. In this motion, the acceleration of the system, and therefore the net force, is proportional to the displacement and points in the opposite direction. That restoring force pulls the object back toward equilibrium. The period and frequency of a simple harmonic oscillator do not depend on amplitude. A diving board shows this idea well. A stiff, thick diving board has a large force constant, so it has a...

/files/media/science-education/science-education-thumbs/12763.jpg

oscillations about an equilibrium position

oscillations-about-an-equilibrium-position

Stable Equilibrium and Atomic Oscillation

Stable equilibrium is a key idea in oscillation. When an object sits at a stable equilibrium point, a small push moves it away, but it then tends to oscillate around that point. If the equilibrium point is unstable, a slight disturbance will not bring the object back. The transcript also describes a half-stable equilibrium point. It is still considered unstable, but the name comes from the fact that the force on only one side points toward the equilibrium point. That makes it different from a...

energy in simple harmonic motion

Simple Harmonic Motion: Energy and Speed

Simple harmonic motion combines potential energy and kinetic energy. In a spring-like oscillator, Hooke’s law explains the potential energy stored when the string or spring is stretched or compressed. Because there are no dissipative forces, the object also has kinetic energy as it moves.

/files/media/science-education/science-education-thumbs/12765.jpg

frequency of spring-mass system

How Mass and Spring Stiffness Set Oscillation

A spring-mass system shows simple harmonic motion, and its oscillation rate depends on the mass and the spring force constant. In this model, the angular frequency, period, and frequency are set by those two values. They do not depend on the motion’s amplitude or on the initial conditions. To find these relationships, the system can be analyzed with Newton’s second law. Imagine a block on a spring on a frictionless surface. Three forces act on the mass: weight, the normal force, and the spring...

/files/media/science-education/science-education-thumbs/14718.jpg

simple harmonic motion and uniform circular motion

simple-harmonic-motion-and-uniform-circular-motion

Simple Harmonic Motion from Circular Motion

Simple harmonic motion and uniform circular motion are closely linked. Simple harmonic motion is oscillatory motion in a system where the net force follows Hooke’s law. Uniform circular motion is motion along a circular path at constant speed. A simple way to create simple harmonic motion is to use uniform circular motion. One example is a ball attached to a vertical turntable that spins at a steady rate. If you watch the ball’s shadow on the floor, the shadow, or projection, moves in simple...

problem solving: energy in simple harmonic motion

problem-solving-energy-in-simple-harmonic-motion

Energy Conservation in Simple Harmonic Motion

Energy conservation in simple harmonic motion explains how a spring and mass system shares energy as it moves back and forth around equilibrium. Simple harmonic motion, or SHM, is periodic motion in time and position. The object oscillates with a constant amplitude and frequency. In SHM, kinetic energy and potential energy change into each other continuously. A good example is the spring in a car shock absorber as the car moves on a bumpy road. The wheel attached to the spring oscillates in...

/files/media/science-education/science-education-thumbs/14743.jpg

simple pendulum

Pendulum Motion and Period

A simple pendulum is a small ball, or bob, hanging from a string that has negligible mass and does not stretch. Pendulums appear in everyday life, including clocks, swing sets, and a sinker on a fishing line. Their motion is a useful model for studying repeating movement. The period of a simple pendulum depends on two factors: its length and the acceleration due to gravity. The period does not depend on the bob’s mass or on the maximum displacement. For small angles, the pendulum behaves like...

torsional pendulum

Angular Oscillation in a Torsion String

Angular oscillation in a torsion string is shown by a rigid body suspended from a string that twists as it moves. The twisting of the string provides the restoring force. The string is ideally massless, and in practice its mass is much smaller than the rigid body&amp;#39;s mass, so it is neglected. When the angular displacement is small, the motion can be modeled as linear angular oscillation. The amplitude is measured as an angle. In this system, the role of mass is played by the rigid...

/files/media/science-education/science-education-thumbs/12768.jpg

physical pendulum

A physical pendulum is a rigid body that hangs from a fixed pivot point and swings when it is displaced. Its motion is similar to a simple pendulum. To describe that motion, physicists use the small-angle approximation, where sin θ ≈ θ. This approximation is valid up to about 14°. The period and angular frequency of a physical pendulum can be found by comparing it with a spring-mass system. The mass moment of inertia is the key quantity that describes how the body’s mass is spread around the...

measuring acceleration due to gravity

Using Pendulums to Find Gravity

Pendulums can be used to measure the acceleration due to gravity. A simple pendulum is a point mass attached to a string. A physical pendulum is an object that swings in a similar way, but its mass is spread out, so it cannot be treated as a point mass on a string. A physical pendulum is described using rotational motion and moment of inertia. In both types of pendulum, gravity provides the restoring force that brings the object back toward the middle of its swing. For a simple pendulum,...

/files/media/science-education/science-education-thumbs/14720.jpg

damped oscillations

Energy Loss in Oscillations

Oscillations in the real world often lose energy as they move. A system that keeps the same amplitude without any loss is called undamped. That kind of motion is rare, because friction and other non-conservative forces usually reduce the motion over time. Common examples show this clearly. A guitar string stops vibrating a few seconds after it is plucked. A swing also needs a person to keep pushing it if the motion is to continue. In some devices, such as car shock absorbers, damping is useful...

types of damping

How Damping Changes Oscillations

Damping changes how a system oscillates by reducing its back-and-forth motion. As damping increases, the period and frequency begin to change because damping opposes motion and lowers the net force in both directions. When damping is very large, the system stops oscillating altogether. It then moves slowly toward equilibrium. An overdamped system reaches equilibrium slowly. An underdamped system reaches equilibrium faster, but it oscillates around the equilibrium point while doing so. A...

forced oscillations

Resonance in Driven Oscillators

Resonance in driven oscillators describes how a periodic force changes an object’s motion. A driven oscillator may first move in a messy way. These early motions are called transients. After the transients die out, the oscillator reaches a steady state. In this state, the motion becomes periodic and the displacement is determined. The amplitude of a driven oscillator can be found from the equations for force and motion. That amplitude depends on the natural frequency of the system and the...

concept of resonance and its characteristics

concept-of-resonance-and-its-characteristics

Resonance in Music, Cars, and Radios

Resonance is a key feature of driven oscillators, and it depends strongly on damping. Damping is the process that reduces motion by removing energy from the system. When a system must resonate at one specific frequency, very light damping is needed. Piano strings and many other musical instruments are common examples of this kind of response. Heavy damping works better when the goal is small-amplitude oscillations. A car suspension system uses this approach so that bumps do not produce large...

/files/media/science-education/science-education-thumbs/12772.jpg

key terms and concepts

Explore how a physical pendulum swings, how moment of inertia affects its motion, and how center of mass ideas help explain real-world uses.

Physical Pendulum Motion and Inertia | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Energy Basics

Chemical reactions, such as those that occur when you light a match, involve changes in energy as well as matter.

Chemical changes and their accompanying ...

First Law of Thermodynamics

Energy Conservation

Energy can be converted from one form into another, but all of the energy present before a change occurs always exists in some form ...

Internal Energy

The total of all possible kinds of energy present in a substance is called the internal energy (U), sometimes symbolized as E. Suppose a system with ...

Energy

The universe is composed of matter in different forms, and all forms of matter contain energy.&#160; The different forms of energy on Earth originate from ...

Types of Potential Energy

Potential energy is also known as energy at rest or stored energy. Common types of potential energy include the gravitational potential energy stored in ...

Types of Kinetic Energy

The amount of kinetic energy of an object depends on its mass and speed. Consider two balls of different masses rolling down an inclined plane at the same ...

Kinetic Energy - I

It&#8217;s plausible to suppose that the greater the velocity of a body, the greater effect it could have on other bodies. This does not depend on the ...

Kinetic Energy - II

The kinetic energy of a particle is one-half of the product of the particle&#8217;s mass and the square of its speed. Note that just as Newton&#8217;s ...

Work-energy Theorem

According to Newton&#x2019;s second law of motion, the sum of all the forces acting on a particle (net force) determines the rate of change in the ...

Work and Energy for Variable Forces

When an object is acted upon by a variable force, the amount of work done and the change in energy of the object can be more complex to calculate compared ...

/files/media/science-education/science-education-thumbs/14699.jpg

work-energy-theorem-for-motion-along-a-curve

Work-Energy Theorem for Motion Along a Curve

The work-energy theorem can be generalized to the motion of a particle along any curved path. The simple argument here is that the curved path can be ...

/files/media/science-education/science-education-thumbs/14700.jpg

Conservation of Energy

The terms &#39;conserved quantity&#39;&#160;and &#39;conservation law&#39;&#160;have specific scientific meanings in physics, which differ from the ...

Conservation of Energy: Application

When solving problems using the energy conservation law, the object (system) to be studied should first be identified. Often, in applications of energy ...

Differentiate among the various forms of energy and recognize that they can be transformed from one form to others.

SC.912.P.10.1

Thermodynamic Systems

A thermodynamic system is a set of objects whose thermodynamic properties are of interest. The system is considered to be embedded in its surroundings or ...

Work Done During Volume Change

In mechanics, work is done on an object when the force acting on it displaces the object. In thermodynamics, work done on a system can be estimated when ...

Path Between Thermodynamics States

Consider the two thermodynamic processes involving an ideal gas that are represented by paths AC and ABC in Figure 1:

In the first process for path A to ...

Heat and Free Expansion

The work done by a thermodynamic system depends not only on the initial and final states but also on the intermediate states&#8212;that is, on the path. ...

The internal energy of a thermodynamic system is the sum of the kinetic and potential energies of all the molecules or entities in the system. The kinetic ...

A change in the internal energy of a system depends on the the net heat transfer into the system and the net work done by the system. The first law of ...

first-law-of-thermodynamics-problem-solving

First Law Of Thermodynamics: Problem-Solving

The first law of thermodynamics states that the change in internal energy of the system is equal to the net heat transfer into the system minus the net ...

Cyclic Processes And Isolated Systems

A thermodynamic system with zero heat exchange and work is an isolated system. For these systems, the internal energy remains constant.
In the case of a ...

Isothermal Processes

A thermodynamic process that occurs at constant temperature is called an isothermal process. Heat slowly flows into the system or out of the system to ...

Isochoric and Isobaric Processes

A thermodynamic process that occurs at constant volume is called an isochoric process. According to the first law of thermodynamics, heat supplied or ...

Work Done in an Adiabatic Process

Consider the adiabatic compression of an ideal gas in the cylinder of an automobile diesel engine. The gasoline vapor is injected into the cylinder of an ...

Thermodynamic Potentials

Thermodynamic potentials are state functions that are extremely useful in analyzing a thermodynamic system. They have dimensions of energy. The four ...

Maxwell's Thermodynamic Relations

Maxwell&#39;s thermodynamic relations are very useful in solving problems in thermodynamics. Each of Maxwell&#39;s relations relates a partial ...

Joule-Thomson Effect

The Joule-Thomson effect, also known as the Joule-Kelvin effect, describes the temperature change of a fluid when it is forced through a valve or porous ...

Explore the Law of Conservation of Energy by differentiating among open, closed, and isolated systems and explain that the total energy in an isolated system is a conserved quantity.

SC.912.P.10.2

Energy and Work

Source: Ketron Mitchell-Wynne, PhD,&#160;Asantha Cooray, PhD, Department of Physics &#38; Astronomy, School of Physical Sciences, University of ...

Enthalpy

Entropy

Power

The concept of work involves force and displacement; meanwhile, the work-energy theorem relates the net work done on a body to the difference in its ...

Power Expended by a Constant Force

The relationship between work done and the time taken to do it can be explained using the concept of power. For example, several sprinters in a race may ...

Compare and contrast work and power qualitatively and quantitatively.

SC.912.P.10.3

Mechanisms of Heat Transfer I

Just as interesting as the effects of heat transfer on a system are the methods by which the heat transfer occur. Whenever there is a temperature ...

Mechanisms of Heat Transfer II

In convection, thermal energy is carried by the large-scale flow of matter. Ocean currents and large-scale atmospheric circulation, which result from the ...

conduction-convection-and-radiation-problem-solving

Conduction, Convection and Radiation: Problem Solving

There are three methods by which heat transfer can take place: conduction, convection, and radiation. Each method has unique and interesting ...

Radiation: Applications

The average temperature of Earth is the subject of much current discussion. Earth is in radiative contact with both the Sun and dark space; it receives ...

Absorption of Radiation

The rate of heat transfer by emitted radiation is described by the Stefan-Boltzmann law of radiation:

where &#963; is the Stefan-Boltzmann constant, a ...

Describe heat as the energy transferred by convection, conduction, and radiation, and explain the connection of heat to change in temperature or states of matter.

SC.912.P.10.4

Kinetic Theory of an Ideal Gas

A mole is defined as the amount of any substance that contains as many molecules as there are atoms in exactly 12 grams of carbon-12. An Italian scientist ...

Molecular Kinetic Energy

The word &#34;gas&#34;&#160;comes from the Flemish word meaning &#34;chaos,&#34; first used to describe vapors by the chemist J. B. van Helmont. Consider ...

basic-postulates-kinetic-molecular-theory-particle-size-energy

Basic Postulates of Kinetic Molecular Theory: Particle Size, Energy, and Collision

The ideal-gas equation, which is empirical, describes the behavior of gases by establishing relationships between their macroscopic properties. For ...

kinetic-molecular-theory-gas-laws-explain-properties-gas

Kinetic Molecular Theory and Gas Laws Explain Properties of Gas Molecules

The test of the kinetic molecular theory (KMT) and its postulates is its ability to explain and describe the behavior of a gas. The various gas laws ...

kinetic-molecular-theory-molecular-velocities-temperature-kinetic

Kinetic Molecular Theory: Molecular Velocities, Temperature, and Kinetic Energy

The kinetic molecular theory qualitatively explains the behaviors described by the various gas laws. The postulates of this theory may be applied in a ...

behavior-gas-molecules-molecular-diffusion-mean-free-path

Behavior of Gas Molecules: Molecular Diffusion, Mean Free Path, and Effusion

Although gaseous molecules travel at tremendous speeds (hundreds of meters per second), they collide with other gaseous molecules and travel in many ...

Relate temperature to the average molecular kinetic energy.

SC.912.P.10.5

Chemical Reactions

A balanced chemical equation provides the information of chemical formulas of the reactants and products involved in the chemical change. A ...

Dynamics of Circular Motion

An object undergoing circular motion, like a race car, is accelerating because it is changing the direction of its velocity. This centrally directed ...

Dynamics Of Circular Motion: Applications

Suppose a car moves on flat ground and turns to the left. The centripetal force causing the car to turn in a circular path is due to friction between the ...

Potential Energy due to Gravitation

Since gravitational force is a conservative force, the amount of work done to move an object between two points in the gravitational field in which it ...

the-principle-of-superposition-and-the-gravitational-field

The Principle of Superposition and the Gravitational Field

The principle of superposition applies to gravitational forces of objects that are sufficiently far apart. It states that the net gravitational force on a ...

/files/media/science-education/science-education-thumbs/14754.jpg

Create and interpret potential energy diagrams, for example: chemical reactions, orbits around a central body, motion of a pendulum.

A. Energy is involved in all physical and chemical processes. It is conserved, and can be transformed from one form to another and into work. At the atomic and nuclear levels energy is not continuous but exists in discrete amounts. Energy and mass are related through Einstein's equation E=mc2.

B. The properties of atomic nuclei are responsible for energy-related phenomena such as radioactivity, fission and fusion.

C. Changes in entropy and energy that accompany chemical reactions influence reaction paths. Chemical reactions result in the release or absorption of energy.

D. The theory of electromagnetism explains that electricity and magnetism are closely related. Electric charges are the source of electric fields. Moving charges generate magnetic fields.

E. Waves are the propagation of a disturbance. They transport energy and momentum but do not transport matter.

Physical Pendulum Motion and Inertia

Description

Transcript

More videos by Standards