Name: moment-area method for cantilever deflection
Uploaded: 2024-05-23T13:00:03.000Z
Duration: 1 min 15 s
Channel: JoVE

يمكن تنفيذ طريقة منطقة العزم على شعاع ناتئ تحت حمل مركز ولحظة لتحديد المنحدر والانحراف.
تبدأ العملية برسم مخطط الجسم الحر للحزمة وحساب التفاعلات في الطرف الثابت.
بعد ذلك ، يتم رسم مخطط لحظة الانحناء لتحديد النقطة التي تساوي فيها اللحظة صفرا.
بعد ذلك ، يتم رسم مخطط M / EI لتحديد المناطق المقابلة للأجزاء AO و OB ، وتعيين علامات موجبة أو سالبة بناء على موقعها بالنسبة للمحور السيني.
يتم تطبيق نظرية منطقة العزم الأولى لحساب الزاوية بين الظلال ، وتستخدم نظرية منطقة العزم الثانية لتحديد الانحراف العرضي ، والذي يساوي اللحظة الأولى حول محور رأسي من خلال B من المساحة الإجمالية بين A و B.
أخيرا ، يتم تحديد الانحراف عند B ، وهو ما يساوي الانحراف العرضي. ثم يتم رسم الشكل المنحرف للشعاع للفهم البصري.

العوارض ذات التحميل المتماثل

Beams with Symmetric Loadings

<div style="direction: rtl;">
 طريقة مساحة العزم هي أداة تحليلية تستخدم في الهندسة الإنشائية لتحديد ميل وانحراف العوارض تحت أحمال مختلفة. فكر في ناتئ ذو حمل مركز وعزم في النهاية الحرة. الخطوة الأولى هي إنشاء مخطط الجسم الحر لحساب التفاعلات عند الطرف الثابت. بعد ذلك، يتم رسم مخطط عزم الانحناء لتصور كيف يتغير عزم الانحناء على طول طول العارضة، مع التركيز على النقاط التي يساوي فيها عزم الانحناء الصفر.
 
 يتم بعد ذلك رسم مخطط M/EI، حيث M هي عزم الانحناء، وE هي معامل المرونة، وI هي عزم القصور الذاتي للمقطع العرضي للعارضة. يحدد هذا الرسم البياني المناطق الموجودة أسفل المنحنى للقطاعات بين النقاط التي يكون فيها عزم الانحناء صفرًا، مع تعيين إشارات إيجابية أو سلبية للمناطق بناءً على موضعها بالنسبة للمحور السيني.
 
 يتم تطبيق نظرية منطقة العزم الأولى لحساب الميل عند أي نقطة على العارضة من خلال دمج المنطقة الموجودة أسفل مخطط M/EI بين نقطتين. يتم بعد ذلك استخدام نظرية منطقة العزم الثانية للعثور على انحراف العارضة، ومساواة ذلك بالعزم الأولى للمنطقة الواقعة تحت مخطط M/EI حول محور عمودي يمر عبر نقطة النهاية.
 
 وأخيراً، تم رسم الشكل المنحرف للعارضة، مما يوفر تمثيلاً مرئياً للنتائج التحليلية ويوضح انحناء العارضة في ظل ظروف الحمل المفروضة. تقدم هذه الطريقة رؤى دقيقة حول الأداء الهيكلي للعوارض الكابولية.
 
</div>

يمكن تنفيذ طريقة منطقة العزم على شعاع ناتئ تحت حمل مركز ولحظة لتحديد المنحدر والانحراف.
العملية ...

Education

JoVE Core

Mechanical Engineering

الهندسة الميكانيكية

Unit 1

الوحدة الأولى

Deflection of Beams

انحراف الكمرات

KEY TERMS AND CONCEPTS

المصطلحات والمفاهيم الأساسية

moment-area method for cantilever deflection

The moment-area method is used in structural engineering to find the slope and deflection of a beam under load. It is especially useful for a cantilever beam with a concentrated load and a moment at the free end.

The analysis begins with a free-body diagram. This diagram helps calculate the reactions at the fixed end. After that, the bending moment diagram is drawn to show how the bending moment changes along the beam. Points where the bending moment is zero are important in this step.

Next, the M/EI diagram is constructed. In this diagram, M is the bending moment, E is the modulus of elasticity, and I is the moment of inertia of the beam cross-section. The areas under the curve are identified between the zero-moment points. Each area is given a positive or negative sign based on its position relative to the x-axis.

The first moment-area theorem is then used to find the slope at a point on the beam. It does this by using the area under the M/EI diagram between two points. The second moment-area theorem is used to find deflection. It equals the first moment of the area under the M/EI diagram about a vertical axis through the endpoint.

The final step is to sketch the deflected shape of the beam. This gives a clear picture of how the beam bends under the applied load and moment. The method provides precise insight into the structural behavior of cantilever beams.

Moment-Area Method for Cantilever Deflection

moment-area-method-for-cantilever-deflection

deformation of a beam under transverse loading

deformation-of-a-beam-under-transverse-loading

Beam Deflection from Loads and Supports

Beam deflection depends on the loads on a beam and the support conditions at its ends. For indeterminate beams, especially those with overhanging parts and multiple concentrated loads, careful analysis is needed to predict how the beam will bend. The first step is to draw an accurate free-body diagram. A free-body diagram shows the forces and moments acting on the beam. It helps reveal how the bending moment changes along the beam length. The bending moment diagram also shows how the beam...

equation of the elastic curve

Beam Deflection and Boundary Conditions

Beam deflection and boundary conditions help describe how a beam bends under load. In structural engineering, the curvature of a plane curve shows how sharply the beam bends. That curvature is found from the curve’s first and second derivatives. A cantilever beam with a point load at its free end is a common example. A diving board works like this type of beam. When slopes are small, the beam’s elastic curve becomes the main shape used in the analysis. The governing equation connects bending...

elastic curve from the load distribution

Beam Deflection Under Distributed Load

Beam deflection under distributed load is a key part of beam analysis in engineering. It helps predict how a beam bends and reacts when a load is spread along its length. Engineers use this relationship to judge whether a structure will stay safe and functional. The analysis starts with the link between load, shear force, and bending moment. These quantities can be written in differential form. When beam flexibility is treated as constant, further differentiation leads to a higher-order...

deflection of a beam

Beam Slope and Deflection by Singularity

Beam slope and deflection can be found with singularity functions when beam loading is hard to write as one simple equation. This method is useful in structural engineering because it helps describe beams under several loads without breaking the problem into many separate cases. Singularity functions are mathematical tools for showing discontinuities in a load, shear force, or bending moment equation. They are especially helpful when a load acts at a single point or over a set interval. In the...

method of superposition

Beam Deflection Under Combined Loads

Beam deflection under combined loads can be found with the method of superposition. This structural engineering method is used to analyze how multiple loads affect a beam. It works by finding the slope and deflection from each load separately, then adding those results together. The method applies only when the beam stays within its elastic limit. In that range, the material deforms in a linearly elastic way. That makes it valid to combine the effects of separate loads without changing the...

moment-area theorems

Beam Deflection Using Moment-Area Rules

The moment-area theorems help describe beam bending in structural engineering. They are often used for building floor supports and other beams under load. The theorems use the elastic curve, which is the shape a beam takes as it deforms. The first theorem links slope change to area on an M/EI diagram. Here, M is the bending moment, E is the modulus of elasticity, and I is the moment of inertia. When M/EI is plotted along the beam length, the area under the curve gives the total rotation...

beams with symmetric loadings

The moment-area method is used in structural engineering to find the slope and deflection of a beam under load. It is especially useful for a cantilever beam with a concentrated load and a moment at the free end. The analysis begins with a free-body diagram. This diagram helps calculate the reactions at the fixed end. After that, the bending moment diagram is drawn to show how the bending moment changes along the beam. Points where the bending moment is zero are important in this step. Next,...

beams with unsymmetric loadings

Beam Deflection and Level Points

Beam deflection and level points can be found for a supported beam under unsymmetrical loadings using moment-area theorems. This type of analysis helps show how a beam bends when forces are spread unevenly along it. It is an important part of structural engineering because it links load patterns to beam response. The first moment-area theorem is used to find the slope at any point on the beam. It states that the change in slope between two points equals the area under the moment diagram over...

maximum deflection

Locating the Beam’s Highest Deflection

Maximum deflection in a supported beam depends on where the load is placed. With an unsymmetrical load, such as a train moving across a bridge, the beam may bend most at a point that is not the midpoint. Finding that point is important for judging stress and deflection in the structure. The point of maximum deflection is called point O. At point O, the tangent to the deflection curve is horizontal. That means the slope is zero there. To locate point O, the slope at any point X along the beam...

key terms and concepts

Use the moment-area method to analyze a cantilever beam with a load and end moment. Learn how free-body diagrams, M/EI diagrams, slope, and deflection are found.

Moment-Area Method for Cantilever Deflection | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Moment-Area Method for Cantilever Deflection

Description

Transcript

Tags