Name: system properties: linearity, causality, memory
Uploaded: 2024-09-26T13:16:54.000Z
Duration: 1 min 26 s
Channel: JoVE

الخطية هي خاصية نظام ذات علاقة مباشرة بين المدخلات والمخرجات ، تجمع بين التجانس والجمعية.
يملي التجانس أنه إذا تم ضرب المدخل في ثابت ، يتم ضرب الناتج في نفس الثابت. تعني الإضافة أن الاستجابة للمدخلات المتعددة هي مجموع استجاباتهم الفردية.
يصنف النظام الذي يحتوي على خصائص التجانس والإضافة على أنه نظام خطي.
تشتمل الأنظمة الخطية على دوائر ذات مقاومات ومكثفات ومحاثات تلتزم بمبدأ التراكب.
على العكس من ذلك ، يتم تصنيف الأنظمة التي تفشل في الامتثال لمعادلة الخطية على أنها غير خطية ، وغالبا ما تتضمن أجهزة مثل المقومات والصمامات الثنائية.
يتميز النظام السببي باستجابة حالية مستقلة عن قيم المدخلات المستقبلية. مثال على ذلك يمكن أن يكون حركة السيارة ، والتي لا يمكنها التنبؤ بإجراءات القيادة المستقبلية.
لا يمكن تحقيق الأنظمة غير السببية ، مثل المرشحات المثالية ، جسديا ولا تتبع مبدأ السببية.
تظهر الأنظمة الديناميكية الذاكرة ، حيث يتأثر الإخراج بكل من المدخلات السابقة والمستقبلية.
الأنظمة الثابتة هي أنظمة عديمة الذاكرة أو لحظية حيث يعتمد الإخراج الحالي فقط على المدخلات الحالية.

تصنيف الأنظمة-1

<div style="direction: rtl;">
الخطية هي خاصية نظام تتميز بعلاقة مباشرة بين المدخلات والمخرجات، تجمع بين التجانس والجمع.

ينص التجانس على أنه إذا تم ضرب المدخل 𝑥(𝑡) في الثابت 𝑐، فإن المخرج 𝑦(𝑡) يتم ضربه في نفس الثابت. رياضيًا، يتم التعبير عن ذلك على النحو التالي:

<img alt="Equation1" src="/files/ftp_upload/16045/16045_PT%20EQUATION_1.svg" style="text-align: center; height: 14px;">
تعني الجمع أن الاستجابة لمجموع المدخلات المتعددة هي مجموع استجاباتها الفردية. بالنسبة للمدخلات 𝑥_1(𝑡) و𝑥_2(𝑡) التي تنتج مخرجات 𝑦_1(𝑡) و𝑦_2(𝑡)، على التوالي:

<img alt="Equation1" src="/files/ftp_upload/16045/16045_PT%20EQUATION_2.svg" style="text-align: center; height: 14px;">
ينتج عن الجمع بين التجانس والجمع معادلة النظام الخطي:

<img alt="Equation1" src="/files/ftp_upload/16045/16045_PT%20EQUATION_3.svg" style="text-align: center; height: 14px;">
تتضمن الأنظمة الخطية دوائر بها مقاومات ومكثفات ومحثات تلتزم بمبدأ التراكب. وعلى العكس من ذلك، تُصنَّف الأنظمة التي تفشل في الامتثال لمعادلة الخطية على أنها غير خطية، مثل المقومات والثنائيات.

النظام السببي هو النظام الذي تكون فيه استجابة التيار مستقلة عن قيم الإدخال المستقبلية. على سبيل المثال، لا يمكن لحركة السيارة التنبؤ بإجراءات القيادة المستقبلية، مما يجعلها نظامًا سببيًا. على النقيض من ذلك، لا يمكن تحقيق الأنظمة غير السببية مثل المرشحات المثالية فيزيائيًا لأنها لا تتبع مبدأ السببية.

تتميز الأنظمة الديناميكية بالذاكرة، حيث يعتمد الناتج على المدخلات الماضية والحالية. ومن الأمثلة على ذلك الدائرة الكهربائية ذات المكثفات أو المحاثات، حيث يتأثر الناتج الحالي بالمدخلات الماضية. أما الأنظمة الثابتة، والمعروفة أيضًا باسم الأنظمة التي لا تحتوي على ذاكرة أو اللحظية، فلديها مخرجات تعتمد فقط على المدخلات الحالية، مثل دائرة المقاومة البسيطة حيث يكون جهد الخرج دالة مباشرة لجهد الدخل الحالي.

إن فهم هذه الخصائص - الخطية والسببية والذاكرة - أمر ضروري لتحليل وتصميم الأنظمة في مختلف المجالات الهندسية.

</div>

الخطية هي خاصية نظام ذات علاقة مباشرة بين المدخلات والمخرجات ، تجمع بين التجانس والجمعية.
يملي التجانس أنه إذا كان المدخل ...

Education

JoVE Core

Electrical Engineering

الهندسة الكهربائية

Unit 1

الوحدة الأولى

Introduction to Signals and Systems

مقدمة في الإشارات والأنظمة

KEY TERMS AND CONCEPTS

المصطلحات والمفاهيم الأساسية

Classification of Systems-I

system properties: linearity, causality, memory

System properties such as linearity, causality, and memory help describe how a system responds to input. These ideas are useful for studying and designing systems in engineering. A system can be checked by looking at how its output changes with different inputs.

Linearity means the input-output relationship follows homogeneity and additivity. Homogeneity says that if an input x(t) is multiplied by a constant c, the output y(t) is multiplied by the same constant. Additivity means the response to a sum of inputs equals the sum of the separate responses. Together, these rules define a linear system, and circuits with resistors, capacitors, and inductors can follow the superposition principle.

Systems that do not satisfy the linearity equation are non-linear. Diodes and rectifiers are examples of non-linear systems. Causality is another key property. A causal system depends only on the present input and past inputs, not on future values.

A car’s motion is a simple example of a causal system, because it cannot depend on future driving actions. Non-causal systems, such as ideal filters, are not physically realizable because they do not follow causality. Memory is the last major property. Dynamic systems have memory, so their output depends on past and present inputs, as in circuits with capacitors or inductors. Static systems, also called memoryless or instantaneous systems, depend only on the present input. A simple resistor circuit is an example, since its output voltage is a direct function of the current input voltage.

System Properties: Linearity, Causality, Memory

system-properties-linearity-causality-memory

signal and system

Signals and Systems in Everyday Data

Signals and systems help describe how data moves through the world. A signal x(t) is a set of data or a time function that represents a variable of interest. It can carry information about atmospheric temperature, humidity, human voice, television images, a dog’s bark, or birdsongs. A signal can also depend on more than one independent variable. An image, for example, depends on horizontal and vertical position, so it can be treated as a two-dimensional signal. In this course, the focus is on...

classification of signals

Signal Types by Time and Amplitude

Signals in signal processing are grouped by time behavior, amplitude, and whether they start before or after time zero. These signal classes help students describe and compare signals before they are analyzed or processed. A continuous-time signal has a value at every instant in time. A discrete-time signal has values only at specific moments, often written as x(n), where n is an integer. Discrete-time signals often come from systems with naturally discrete values, such as digital audio...

energy and power signals

Power and Energy in Electrical Signals

Power and energy in electrical signals are measured from voltage and current across a resistor. These signals help describe how much energy a signal carries and how much power it delivers over time. For a continuous-time signal, total energy is found by integrating the square of the signal's magnitude over a chosen time interval. Time-averaged power is then the total energy divided by the length of that interval. For a discrete-time signal, total energy is found by summing the squares of the...

even and odd signals

Signal Symmetry and Decomposition

Signal symmetry helps classify continuous-time and discrete-time signals as even or odd. An even signal matches its time-reversed version. It mirrors around the vertical axis, so the values at negative time match the values at positive time. An odd signal does not match its time-reversed counterpart. It has antisymmetry about the vertical axis. These symmetry rules are used in both continuous-time and discrete-time signal analysis. Any continuous-time signal can be split into even and odd...

basic continuous time signals

Step, Impulse, and Ramp Signals

Step, impulse, and ramp signals are the main basic continuous-time signals. They are also called singularity functions. These signals are known for discontinuities or for derivatives that are discontinuous. The unit step function, written as u(t), is zero for negative time values and one for positive time values. It has a jump at t = 0. In many cases, it can model an abrupt change, such as the step voltage that appears when a car ignition key is turned. The derivative of the unit step...

rectangular and triangular pulse function

rectangular-and-triangular-pulse-function

Modeling Pulses with Rectangles and Triangles

Rectangular and triangular pulse functions are basic signal shapes used to model waveforms in signal processing. The rectangular pulse has a flat top and is centered at the origin with a height of one unit. It is described by two parameters: T, which gives the center location on the time axis, and τ, which sets the pulse duration. A rectangular pulse can also represent a real signal with a chosen amplitude and length. For example, a pulse with a 5 V amplitude, a 3-second duration, and a center...

exponential and sinusoidal signals

Complex Exponentials in Signal Behavior

Exponential and sinusoidal signals are used to describe how waveforms change over time. The continuous-time exponential function uses constants α and A. When both are real, it shows exponential growth or decay. Graphs of these signals make the rise or drop easy to see. When α is purely imaginary, the signal becomes a complex exponential. In this form, j is the imaginary unit and ω0 is the angular frequency. A complex exponential is periodic when its magnitude is unity. That periodic behavior...

basic discrete time signals

Discrete-Time Signal Basics and Shapes

Discrete-time signals include several basic sequences used in signal processing. The unit step sequence is 1 for zero and positive values of the integer n. A graph of eight sample points shows it as a step that begins at n = 0 and stays constant after that. The unit impulse, also called the sample sequence, is 0 for every n except at n = 0, where it equals 1. This sequence is written as δ(n). It is the first difference of the unit step sequence, and the unit step sequence u(n) is the...

basic operations on signals

Signal Transformations in Time and Amplitude

Signal transformations in time and amplitude are key tools in signal processing. They include time reversal, time scaling, time shifting, and amplitude changes. These operations help students describe how a continuous-time signal changes when it is mirrored, stretched, moved, or resized. Time reversal flips a continuous-time signal about the vertical axis at t = 0. It is done by replacing t with -t, so x(t) becomes x(-t). A graph of the signal shows this mirrored shape clearly. Time scaling...

classification of systems-i

System properties such as linearity, causality, and memory help describe how a system responds to input. These ideas are useful for studying and designing systems in engineering. A system can be checked by looking at how its output changes with different inputs. Linearity means the input-output relationship follows homogeneity and additivity. Homogeneity says that if an input x(t) is multiplied by a constant c, the output y(t) is multiplied by the same constant. Additivity means the response...

classification of systems-ii

Continuous and Discrete System Models

Continuous-time and discrete-time systems are two common ways to model signals and their outputs. In continuous-time systems, both input and output signals change smoothly as time moves continuously. These systems are often written with differential or algebraic equations. An RC circuit is one example of a continuous-time system. Its input and output voltage can be related by a differential equation based on Ohm’s law and the capacitor relation. Discrete-time systems work differently. Their...

key terms and concepts

Explore linearity, causality, and memory in system behavior. Learn how linear, non-linear, causal, dynamic, and static systems differ in engineering.

System Properties: Linearity, Causality, Memory | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

System Properties: Linearity, Causality, Memory

Description

Transcript