Name: tracking reaction kinetics with light and pressure
Uploaded: 2020-09-24T15:06:50.000Z
Duration: 3 min 9 s
Channel: JoVE

K12 Standards

Texas Essential Knowledge and Skills

High School

Chemistry and Physics

IPC.7

IPC.7.F

Measuring Reaction Rates

可通过确定 反应物或产物的浓度随时间的变化 来研究反应速率。浓度变化可以通过 旋光法、光谱法或压力测量 等实验技术来测量。旋光法使用平面偏振光，电场只沿一个平面定向。它可测量化合物 旋转偏振光的能力，这取决于 存在的化合物的分子结构。考虑蔗糖的水解，这一过程 可产生葡萄糖和果糖。旋光计用于测量通过 反应蔗糖溶液的平面偏振光的 旋转度。蔗糖引起顺时针旋转，而葡萄糖和果糖引起 逆时针旋转。通过以设定的时间间隔测量光的旋转度，可以计算出蔗糖、葡萄糖或果糖 的相对浓度，并确定反应速率。还可以使用分光光度法，利用反应物或产物 吸收特定波长的光的能力 来测量反应速率。感兴趣物质的浓度越高，其吸光度将越强。例如，无色氢气 与紫碘蒸气反应形成无色 碘化氢。碘蒸气吸收黄绿色区域的光 并反射紫光。在反应过程中，分光光度计 测量样品吸收的光量 并分析透射的光。因此，随着反应的进行，黄绿色吸光度降低，从而观察到 碘蒸气浓度降低。利用朗伯-比尔定律，可以计算出在不同时间点吸收的光的强度，并将其与浓度的变化联系起来。或者，如果其中一种反应物或产物是气体，则通过监测压力变化来测量压力 以确定反应速率。例如，在过氧化氢分解期间，使用压力计 来监测释放的氧气的压力来研究反应速率。随着反应的进行和更多氧气的释放，压力会上升。使用理想气体方程，将不同时间点记录的压力值 转换为浓度。浓度随时间的变化 用于确定反应速率。对于长时间的反应，可以以固定的时间间隔从反应混合物中 取出样品或等分试样。然后使用 气相色谱、质谱或滴定 等仪器技术测量相对浓度，以计算反应速率。

测量反应速率

偏振测量发现在化学动力学中应用于在化学反应期间测量光活性物质的浓度和反应动力学。 光活性物质能够旋转通过线性极化光的极化平面—这是一种称为光旋转的功能。 光活性归因于物质的分子结构。 普通单色光不偏振，在所有可能垂直于其传播方向的平面上都有电场振荡。 当未极化的光通过极化器时，一个线性极化光在一个平面中保持振荡。 
 旋光仪仪器确定光的极化方向或光活性物质产生的旋转方向。 在旋光仪中，平面极化光被引入含有反应溶液的光管中，反应可以在不干扰系统的情况下进行。 如果样品中含有光不活性物质，则极化光的平面方向不会改变。 在分析仪屏幕上，光照将以相同的强度显示，旋转角度读数 (ɑ) 将读数为零度。 
 但是，反应样品中存在光活性化合物会导致极化光的平面旋转穿过。 光的亮度将会降低。 分析仪设备的轴必须顺时针 (偏光) 或逆时针 (向光) 方向旋转，以观察最大亮度。 分析仪需要旋转的方向取决于所存在的化合物的性质。 测得的光旋转与样品中存在的光活性物质的浓度成比例。 通过分析不同时间点的旋转角度测量值，光活性化合物的浓度可以根据时间的函数来确定。 
 光谱分析 
 光谱仪等光学实验技术也经常用于监测化学反应并保护定量的关于反应动力学的信息。 使用光谱法，特定波长的光通过反应样品传递。 样品中的分子或化合物 (反应物或生成物) 可能会吸收一些光线，同时传输由探测器测量的剩余数量。 吸收的光量取决于所关注的化合物或分子的浓度。 例如，化合物的浓度越高，吸收度越大。 从吸光度来看，仪器将能够确定感兴趣化合物的浓度。 在反应性样本中，定期测量的吸光度会计算反应物或生成物的浓度，作为时间的函数。 
 压力测量 
 对于涉及气体相物质的反应，反应动力学随后是量化气体摩尔数的变化，这是压力变化的一个函数。 气相反应的实验设置可以连接到一个压力计，该压力计可以测量气态反应物或生成物的压力。 随着反应的进展，反应物的压力会下降， (或) 产品的压力会增加。 这可以通过压力计作为时间的函数来测量。 通过采用理想的气体定律—气体浓度与其部分压力成正比—可以计算化学反应的速率。

偏振光谱法在化学动力学中用于测量化学反应过程中光学活性物质的浓度及反应动力学。

Education

教育

JoVE Core

Chemistry

化学

Chemical Kinetics

化学动力学

KEY TERMS AND CONCEPTS

关键术语与概念

tracking reaction kinetics with light and pressure

Reaction kinetics can be tracked with polarimetry, spectrometry, and pressure measurements. These methods let scientists follow a reaction without disturbing the sample. They also help determine how reactant or product concentrations change over time.

Polarimetry is used for optically active substances. These substances rotate the plane of polarized light, which is called optical rotation. The effect comes from molecular structure. Normal monochromatic light is unpolarized, but after it passes through a polarizer, it becomes linearly polarized with vibrations in one plane.

In a polarimeter, this plane-polarized light is sent through a tube of reacting solution. The instrument then shows how much the light has been rotated. If the sample contains optically inactive substances, the light keeps the same orientation, the analyzer screen stays equally bright, and the rotation angle is zero degrees. If optically active compounds are present, the light becomes dimmer and the analyzer must be turned clockwise or counter-clockwise to restore maximum brightness. Clockwise rotation is dextrorotatory, and counter-clockwise rotation is levorotatory.

The amount of optical rotation is proportional to the concentration of the optically active substance in the sample. By taking rotation readings at different times, the concentration can be followed as the reaction proceeds. Spectrometry gives similar kinetic information by passing light of a specific wavelength through a reacting sample. Some of the light is absorbed by the reactant or product, and a detector measures the remaining light. Higher concentration gives higher absorbance, so repeated absorbance measurements can be used to find concentration over time.

Pressure measurements are useful for gas-phase reactions. A manometer can be connected to the reaction setup to monitor the pressure of a gaseous reactant or product. As the reaction goes on, reactant pressure may decrease and product pressure may increase. Using the ideal gas law, the concentration of a gas is proportional to its partial pressure, so reaction rate can be calculated from the pressure change.

Tracking Reaction Kinetics with Light and Pressure

tracking-reaction-kinetics-with-light-and-pressure

reaction rate

Measuring reaction rates shows how fast reactants are used up or products are formed over time. The rate of reaction is the change in the amount of a reactant or product per unit time. Because of that, scientists measure how a property changes as the reaction proceeds and connect that change to reactant or product amounts. For reactions that make or use a gas, the rate can be followed by changes in volume or pressure. A rate expression is the mathematical way to write how concentration changes...

measuring reaction rates

Reaction kinetics can be tracked with polarimetry, spectrometry, and pressure measurements. These methods let scientists follow a reaction without disturbing the sample. They also help determine how reactant or product concentrations change over time. Polarimetry is used for optically active substances. These substances rotate the plane of polarized light, which is called optical rotation. The effect comes from molecular structure. Normal monochromatic light is unpolarized, but after it passes...

concentration and rate law

Reaction Order from Concentration

Reaction order from concentration shows how reactant amounts affect reaction rate. Rate laws, also called differential rate laws or rate equations, are mathematical expressions that connect reaction rate with the concentrations of reactants. For a generic reaction a A + b B → products, the rate law can be written using the reactant concentrations [A] and [B] and a rate constant k. In a rate law, k is the rate constant for one specific reaction at one specific temperature. The exponents m and n...

determining order of reaction

Finding Rate Law from Initial Rates

Rate laws connect the speed of a chemical reaction to the concentration of its reactants. The rate constant, k, and the reaction orders are not taken from the chemical equation. They are found experimentally by watching how the rate changes when the reactant concentrations change. One common way to do this is the method of initial rates. In this method, several trials are run with different starting concentrations. The measured rates are then compared to determine the reaction orders and,...

the integrated rate law: the dependence of concentration on time

the-integrated-rate-law-the-dependence-of-concentration-on-time

Reading Reaction Progress with Integrated Laws

Integrated rate laws connect reaction concentration to time. They help show how much reactant or product is present after a certain period. They can also help estimate how long a reaction must run to reach a given extent. A common use is finding how long radioactive material must be stored before its radioactivity drops to a safe level. These equations come from the differential rate law after it is integrated with respect to time. For a first-order reaction, where rate = k[A], the integrated...

half-life of a reaction

Reaction Half-Life in Kinetics

Reaction half-life is the time needed for half of a reactant to be consumed. After each half-life, half of the remaining reactant is used up. A hydrogen peroxide decomposition example shows this pattern clearly. The concentration drops from 1.000 M to 0.500 M in the first 6.00 hours, then to 0.250 M in the next 6.00 hours, and then to 0.125 M in the third period. Each later 6.00-hour interval removes half of what is left. For first-order reactions, the half-life does not depend on the reactant...

temperature dependence on reaction rate

Collision Theory and Reaction Speed

Collision theory explains why reaction speed depends on how particles collide. Atoms, molecules, or ions must come close together before they can react. The theory says the reaction rate depends on the collision rate, the orientation of the colliding species, and whether the collision has enough energy for bonds to change. A gas-phase reaction between carbon monoxide and oxygen shows why orientation matters. The molecules can collide in more than one way. If the oxygen side of carbon monoxide...

arrhenius plots

Determining Activation Energy from Temperature

The Arrhenius equation links activation energy and the rate constant, k, for chemical reactions. It is written as k = Ae−Ea/RT. In this equation, R is the ideal gas constant with a value of 8.314 J/mol·K, T is the temperature on the kelvin scale, Ea is the activation energy in J/mole, e is the constant 2.7183, and A is the frequency factor. The frequency factor depends on collision frequency and the orientation of reacting molecules. Experimental kinetic data can be used to find the activation...

reaction mechanisms

Elementary Steps in Reaction Mechanisms

Chemical reactions can happen in steps, and a balanced equation does not show the full path at the molecular level. A reaction mechanism, also called a reaction path, gives the step-by-step process that explains how reactants become products. The decomposition of ozone is one example of a reaction that can be described by a sequence of steps. Each step in a mechanism is an elementary reaction. These elementary reactions happen in order, and when they are added together, they give the balanced...

rate-determining steps

Reaction Bottlenecks in Chemical Kinetics

Reaction bottlenecks help explain rate-determining steps in multistep reaction mechanisms. In a mechanism with several elementary steps, one step is often much slower than the others. That slowest step is called the rate-limiting step, or rate-determining step. A reaction cannot move faster than its slowest step, so this step controls the overall reaction rate. The idea is like traffic on a four-lane freeway with one lane closed. Cars can only move as fast as the bottleneck allows. In the same...

catalysis

Catalyst Action in Reaction Rates

Catalysts change the rate of a chemical reaction by giving it a faster path. A catalyst increases reaction rate without being consumed during the process. Its effect is often explained with reaction mechanisms and energy diagrams. For an endothermic reaction, the reactants and products start and end at the same energies in both cases. The uncatalyzed path is a one-step mechanism with one transition state. The catalyzed path follows a different mechanism with two transition states and a lower...

enzymes

Enzyme Action and Inhibition

Enzymes are biological catalysts that speed up many reactions in living organisms. They help control cellular metabolism by lowering the activation energy needed for biochemical reactions. When activation energy drops, reaction rates can increase. Enzyme problems can also lead to serious disease. A genetic abnormality that causes G6PD, or glucose-6-phosphate dehydrogenase, deficiency can disrupt the pathway that supplies NADPH to cells. In red blood cells, this can reduce glutathione and...

key terms and concepts

See how polarimetry, spectrometry, and pressure measurements monitor reaction kinetics by tracking optical rotation, absorbance, and gas pressure changes.

Tracking Reaction Kinetics with Light and Pressure | JoVE K12

chemistry

JoVE Core 化学通过简单明了且通俗易懂的动画视频课程，将普通化学概念带入到现实生活当中。此外，在科学家行动视频中，我们演示了在实验室中进行的经典和原始研究实验。

north-carolina-k-12-science-standard-course-of-study

NC K-12 Science Standard Course of Study

9-12

Matter and its Interactions

PS.Chm.5.1

Pennsylvania State Academic Standards

Physical Science

Chemical Reactions

3.2.9-12.D

3.2.9-12.E

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Interactions Of Matter

Chemical reactions

Virginia  Standards of Learning

HIgh School

CH.7

CH.7.e

Minnesota Academic Standards in Science

3.2.1 9C.3.1.1.2

Alabama Course of Study Science

Matter and Its Interactions: Energy

9-12.C.3.3.d

Next Generation Science Standards

Matter and Its Interactions

HS-PS1-4

HS-PS1-5

Florida Department of Education

SC.912.P.12

SC.912.P.12.12

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Chemical Reactions

HS-PS1-5.

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

Elements: Chemical Symbols and Isotopes

A chemical symbol is an abbreviation used to indicate an element or an atom of an element. For example, the symbol for mercury is Hg. The same symbol is ...

Ions and Ionic Charges

In ordinary chemical reactions, the nucleus &mdash; which contains the protons and neutrons of each atom and thus identifies the element &mdash; remains ...

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

Atomic Mass

Atoms &mdash; and the protons, neutrons, and electrons that compose them &mdash; are extremely small. For example, a carbon atom weighs less than 2 ...

Molar Mass

The identity of a substance is defined not only by the types of atoms or ions it contains but by the quantity of each type of atom or ion. For example, ...

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

Types of Chemical Bonds

Chemical bonding theories were pioneered by American chemist Gilbert&#xA0;N. Lewis. He developed a model called the Lewis model to explain the type and ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&#xA0;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

trends-in-lattice-energy-ion-size-and-charge

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&#xA0;

Electronegativity values of ...

bond-polarity-dipole-moment-and-percent-ionic-character

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

Bonding in Metals

Metallic bonds are formed between two metal atoms. A simplified model to describe metallic bonding has been developed by Paul Dr&#xFC;de called the ...

Model basic atomic structure and relate an element's atomic structure to its bonding, reactivity, and placement on the Periodic Table.

IPC.7.A

physical-and-chemical-properties-of-matter

Physical and Chemical Properties of Matter

The characteristics that enable us to distinguish one substance from another are called properties.

Physical Properties of Matter

A physical property is ...

atomic-radii-and-effective-nuclear-charge

Atomic Radii and Effective Nuclear Charge

The elements in groups of the periodic table exhibit similar chemical behavior. This similarity occurs because the members of a group have the same number ...

Ionic Radii

Ionic radius is the measure used to describe the size of an ion. A cation always has fewer electrons and the same number of protons as the parent atom; it ...

Ionization Energy

The amount of energy required to remove the most loosely bound electron from a gaseous atom in its ground state is called its first ionization energy ...

Electron Affinity

The electron affinity (EA) is the energy change for adding an electron to a gaseous atom to form an anion (negative ion).



This process can be either ...

Alkali Metals

Group 1 elements are soft and shiny metallic solids. They are malleable, ductile, and good conductors of heat and electricity. The melting points of the ...

Halogens

Group 17 elements, known as halogens, are nonmetals. At room temperature, fluorine and chlorine are gases, bromine is a liquid, and iodine a solid. ...

Noble Gases


The elements in group 18 are noble gases (helium, neon, argon, krypton, xenon, and radon). They earned the name &ldquo;noble&rdquo; because they were ...

Use patterns within the Periodic Table to predict the relative physical and chemical properties of elements.

IPC.7.B

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

Phase Transitions

Whether solid, liquid, or gas, a substance&#39;s state depends on the order and arrangement of its particles (atoms, molecules, or ions). Particles in the ...

phase-transitions-vaporization-and-condensation

Phase Transitions: Vaporization and Condensation

The physical form of a substance changes on changing its temperature. For example, raising the temperature of a liquid causes the liquid to vaporize ...

Phase Transitions: Melting and Freezing

Heating a crystalline solid increases the average energy of its atoms, molecules, or ions, and the solid gets hotter. At some point, the added energy ...

phase-transitions-sublimation-and-deposition

Phase Transitions: Sublimation and Deposition

Some solids can transition directly into the gaseous state, bypassing the liquid state, via a process known as sublimation. At room temperature and ...

Melting Points

Melting Points in Organic Chemistry
The melting point of a compound is the temperature at which the solid phase transitions into the liquid phase at a ...

Boiling Points

Source: Lara Al Hariri at the University of Massachusetts Amherst, MA, USA

	Preparation of the LaboratoryExpand
	Here, we show the laboratory preparation ...

Explain how physical and chemical properties of substances are related to their usage in everyday life such as in sunscreen, cookware, industrial applications, and fuels.

IPC.7.C

Emission Spectra

When solids, liquids, or condensed gases are heated sufficiently, they radiate some of the excess energy as light. Photons produced in this manner have a ...

Metal Flame Emission

Metal Flame Emission
Flame testing is an analytical technique where a sample is placed in a flame, and the characteristic flame color is used to identify ...

Atomic Orbitals

An atomic orbital represents the three-dimensional regions in an atom where an electron has the highest probability to reside. The radial distribution ...

The Pauli Exclusion Principle

The arrangement of electrons in the orbitals of an atom is called its electron configuration. We describe an electron configuration with a symbol that ...

The Energies of Atomic Orbitals

In an atom, the negatively charged electrons are attracted to the positively charged nucleus. In a multielectron atom, electron-electron repulsions are ...

Explain how electrons can transition from a high energy level to a low energy state, emitting photons at different frequencies for different energy transitions.

IPC.7.D

The de Broglie Wavelength

In the macroscopic world, objects that are large enough to be seen by the naked eye follow the rules of classical physics. A billiard ball moving on a ...

The Uncertainty Principle

Werner Heisenberg considered the limits of how accurately one can measure properties of an electron or other microscopic particles. He determined that ...

The Quantum-Mechanical Model of an Atom

Shortly after de Broglie published his ideas that the electron in a hydrogen atom could be better thought of as being a circular standing wave instead of ...

Quantum Numbers

It is said that the energy of an electron in an atom is quantized; that is, it can be equal only to certain specific values and can jump from one energy ...

Balmer Series

The Bohr Model
Niels Bohr proposed a model for the hydrogen atom in 1913 that described discrete energy states are associated with a fixed electron orbit ...

Explain how atomic energy levels and emission spectra present evidence for the wave particle duality.

IPC.7.E

Science concepts. The student knows that relationships exist between the structure and properties of matter. The student is expected to:

Tracking Reaction Kinetics with Light and Pressure

Description

Transcript

More videos by Standards