Name: finding the endpoint in weak acid–base titration
Uploaded: 2024-04-04T10:51:19.000Z
Duration: 1 min 8 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Chemistry

Matter and its Interactions

PS.Chm.6.3

titration-of-a-weak-acid-with-a-weak-base

Titration of a Weak Acid with a Weak Base

用弱碱（如氨水）滴定弱酸（如乙酸）会生成中性的乙酸铵盐和水。
通过测量滴定过程中各个阶段的 pH 值，绘制弱酸与弱碱的滴定曲线。
用 100 mL 0.1 M 氨水滴定 100 mL 0.1 M 乙酸溶液时，初始 pH 为 2.87。
如果弱酸和弱碱的 Ka 与 Kb 值相等，则等当点时的 pH 为 7，表明溶液呈中性。如果 Ka 大于 Kb，则等当点时的 pH 小于 7。反之，如果 Ka 小于 Kb，则等当点时的 pH 大于 7。
整个滴定曲线的 pH 变化是渐进的，未观察到明显的终点。然而，可使用中性红和亚甲蓝指示剂的混合物来近似判断终点。

用弱碱滴定弱酸

弱酸和弱碱不会完全发生解离，因此会很少对这两者之间的滴定进行研究。当进行此类研究时，例如用弱碱来滴定弱酸，其中的滴定曲线便会绘制出其中的 pH 值与添加弱碱体积变化关系的函数。以氨水滴定乙酸为例，在滴定的过程中，这两种物质会形成乙酸铵和水，其中的 pH 值会变得缓慢且逐渐变慢。

因此，没有一种简单的指示器可以急剧改变其中的颜色来帮助其来精确定位相应的等值点。解决此问题的一种相对简单的方法是混合两种指示剂（在本例中为中性红和亚甲蓝），使混合物在等当点处能够表现出急剧的颜色变化（此处为紫蓝色变化到绿色）。

对于具有相同 Ka 和 Kb 值的弱酸和弱碱，在当量点处所计算的 pH 值为 7。如果 Ka 的值大于 Kb，则 pH 值会小于 7，从而使终点溶液呈酸性。然而，如果 Ka 的值小于 Kb，则计算出的 pH 值会大于 7，从而导致终点溶液呈碱性。

弱酸（如乙酸）与弱碱（如氨水）的滴定反应生成中性的醋酸铵盐和水。  
滴定……

Education

教育

JoVE Core

Analytical Chemistry

分析化学

Unit 1

第一单元

Acid–Base Titration

酸碱滴定

KEY TERMS AND CONCEPTS

关键术语与概念

finding the endpoint in weak acid–base titration

Weak acid and weak base titration is used to follow how pH changes as base is added. In this kind of titration, both the acid and the base dissociate only partly. The titration curve shows a slow, gradual pH change instead of a sharp jump.

A common example is the titration of acetic acid with ammonia. During the reaction, these two species form ammonium acetate and water. Because the pH changes so gradually, there is no simple indicator that shifts color sharply at the equivalence point.

One practical solution is to mix two indicators, neutral red and methylene blue. The mixed indicator gives a clearer color change at the endpoint, from violet-blue to green. For a weak acid and weak base with the same Ka and Kb values, the pH at the equivalence point is 7. If Ka is greater than Kb, the pH is less than 7 and the endpoint is acidic. If Ka is less than Kb, the pH is greater than 7 and the endpoint is basic.

Finding the Endpoint in Weak Acid–Base Titration

finding-the-endpoint-in-weak-acid-base-titration

acid&#8211;base titration: overview

Titration Curves and pH Changes

Acid-base titration uses a known acid or base to find the concentration of an unknown solution. A base can titrate an acid, or an acid can titrate a base. As titrant is added little by little, the pH changes in a predictable way. The pH change is shown on a titration curve. A titration curve plots how the pH of the solution changes as more titrant is added. Scientists use this curve to follow the progress of the titration and to identify the endpoint, which is the point used to stop the...

titration of a strong acid with a strong base

titration-of-a-strong-acid-with-a-strong-base

pH Changes in Strong Acid-Base Titration

pH changes in a strong acid-strong base titration depend on the amount of leftover hydronium or hydroxide ions. A strong acid such as hydrochloric acid fully dissociates in water. That gives the solution hydronium ions and chloride ions, so the starting pH is low. When sodium hydroxide is added, it neutralizes hydronium ions. As more base is added, the concentration of hydronium ions falls and the pH rises. At the equivalence point, the hydronium ions have been neutralized and the solution is...

titration of a weak acid with a strong base

titration-of-a-weak-acid-with-a-strong-base

Weak Acid Titration Curve and pH Stages

Weak acid titration with a strong base changes pH in clear stages. The acid in this example is acetic acid, and the base is sodium hydroxide. Each stage uses a different pH calculation method. At the start, the pH of the weak acid is found with its dissociation constant, Ka, and an ICE table. An ICE table tracks the initial, change, and equilibrium amounts of the acid. This step describes the acid before much base is added. As sodium hydroxide is added, a buffer forms. A buffer is a solution...

titration of a weak base with a strong acid

titration-of-a-weak-base-with-a-strong-acid

Ammonia Titration Curve with HCl

Ammonia titration with hydrochloric acid shows how a weak base behaves as acid is added. The curve is the mirror image of a weak acid titrated with a strong base. In this case, ammonia acts as the weak base, and hydrochloric acid acts as the strong acid. The starting pH of 50 mL of 0.1 M ammonia is found with an ICE table and the Kb value. That calculation gives an initial pH of 11.11. As hydrochloric acid is added, the pH begins to fall. After 25 mL of 0.1 M hydrochloric acid is added, the...

titration of a weak acid with a weak base

Weak acid and weak base titration is used to follow how pH changes as base is added. In this kind of titration, both the acid and the base dissociate only partly. The titration curve shows a slow, gradual pH change instead of a sharp jump. A common example is the titration of acetic acid with ammonia. During the reaction, these two species form ammonium acetate and water. Because the pH changes so gradually, there is no simple indicator that shifts color sharply at the equivalence point. One...

solution composition during acid/base titrations

solution-composition-during-acidbase-titrations

Acetic Acid Buffer Changes in Titration

Acetic acid buffer changes during a weak acid–strong base titration. When acetic acid is titrated with sodium hydroxide, the reaction forms water and the conjugate base of the acid, sodium acetate. The mixture of acetic acid and sodium acetate acts as a buffer, which helps show how solution makeup shifts during the titration. The relative amounts of acetic acid and acetate ions are tracked with α values. Here, α0 represents the equilibrium concentration of acetic acid, and α1 represents the...

mixtures of acids

Finding pH in Acid Mixtures

Finding pH in acid mixtures depends on the acids present and their dissociation constants. When a solution contains two acids, the pH can be found by choosing the method that matches their relative strengths. The key idea is that the stronger acid often controls the hydronium ion level, which is the amount of H3O+ in solution. In a mixture of a strong acid and a weak acid, the strong acid dissociates completely. It becomes the main source of hydronium ions in the solution. The weak acid...

titration in nonaqueous solvents

Nonaqueous Solvents for Sharper Titration Endpoints

Nonaqueous solvents can make acid-base titrations easier to read by giving sharper endpoints. Most acid-base titrations are done in water, but water can compete with weak acids or bases for proton donation or acceptance. That competition can blur the titration curve and make the endpoint less clear. Water also changes the partial ionization of weak acids and bases. For example, water can accept a proton from acetic acid to form hydronium and acetate ions. The hydronium ion is a stronger acid...

titration of polyprotic base with a strong acid

titration-of-polyprotic-base-with-a-strong-acid

Carbonate Buffering in Acid Titration

The titration of sodium carbonate with hydrochloric acid shows how a polyprotic base reacts in stages. A polyprotic base can accept more than one proton, so its titration curve has two equivalence points. These points mark where one form has been fully changed into the next. At the first equivalence point, carbonate ions are completely converted to bicarbonate ions. The region before this point is the carbonate/bicarbonate buffer. In this buffer region, both forms are present in the solution. <br...

titration of polyprotic acids with a strong base

titration-of-polyprotic-acids-with-a-strong-base

Polyprotic Acid Titration Curve Features

Polyprotic acid titration curves show how acids with more than one ionizable proton react with a strong base. Each proton is released in a separate step. Each step has its own dissociation constant, or Ka, and each later Ka is weaker than the one before it. When a polyprotic acid such as sulfurous acid is titrated with sodium hydroxide, the base first neutralizes the first ionizable proton. This forms an intermediate species, such as hydrogen sulfite ions. The first part of the curve looks...

composition of polyprotic acid solutions as a function of ph

composition-of-polyprotic-acid-solutions-as-a-function-of-ph

Polyprotic Acid Titration Fractions at Each pH

Polyprotic acid titration shows how the main species in solution change as pH changes. In a compound of the form H2M, there are two ionizable protons. That means the titration with a base produces two equivalence points on the curve. As base is added, three species can be present in the solution: H2M, HM−, and M2−. Their amounts are shown as fractions called α0, α1, and α2. These alpha values track how much of each form is present at different stages of the titration. At the start of the...

buffers: overview

Buffers and pH Stability

Buffers help keep the pH of a solution stable when small amounts of acid or base are added. They are made from a weak acid and its conjugate base, or from a weak base and its conjugate acid. This balance lets the solution resist large pH changes until the buffer capacity is exceeded. One common buffer uses acetic acid and sodium acetate. Here, CH3COOH acts as the weak acid and CH3COONa provides its salt. Another buffer uses ammonia and ammonium chloride, written as NH3 and NH4Cl. These...

buffers: buffer capacity

Buffer Capacity and pH Resistance

Buffer capacity describes how well a buffer resists changes in pH. It is a quantitative measure, so it tells how much acid or base a one-liter buffer solution can take before its pH shifts by 1 unit. In the equation, beta is the buffer capacity, while Ca and Cb represent the moles of acid and base added. The term dpH means the change in pH. A graph of pH versus the moles of base added to a weak acid with a pKa of 5 shows how buffering works as more base is added. Taking the derivative of that...

leveling effect

How Solvents Limit Acid and Base Strength

The leveling effect explains how a solvent can limit acid and base strength in solution. In acid-base chemistry, the solvent sets a ceiling on how strong an acid or base can act. Stronger acids or bases may react with the solvent itself instead of with the intended compound. When a base is stronger than the conjugate base of the solvent, it deprotonates the solvent first. A conjugate base is the species left after an acid loses a proton. This reaction keeps going until the stronger base is...

key terms and concepts

Explore how a weak acid and weak base titration changes pH, why acetic acid and ammonia are a challenge, and how mixed indicators help locate the endpoint.

Finding the Endpoint in Weak Acid–Base Titration | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Alabama Course of Study Science

Matter and Its Interactions

9-12.C.1.6.e

new-york-state-science-learning-standards

New York State Science Learning Standards

High School

Physical Science

HS. Chemical Reactions

HS-PS1-11.

Scientific Laws and Theories

Scientific Laws

In science, a law is defined as a concise, verbal or mathematical, statement that summarizes a vast number of experimental observations. ...

The Scientific Method

Chemistry is an empirical science. Scientists often pose questions to understand the chemistry in everyday life and seek answers to these questions. To ...

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

Elements: Chemical Symbols and Isotopes

A chemical symbol is an abbreviation used to indicate an element or an atom of an element. For example, the symbol for mercury is Hg. The same symbol is ...

Use models to explain how the scientific understanding of atomic structure has evolved.

PS.Chm.1.1

Radioactivity and Nuclear Equations

Nuclear chemistry is the study of reactions that involve changes in nuclear structure. The nucleus of an atom is composed of protons and, except for ...

Types of Radioactivity

The most common types of radioactivity are &#945; decay, &#946; decay, &#947; decay, neutron emission, and electron capture.
Alpha (&#945;) decay is the ...

Nuclear Stability

Protons and neutrons, collectively called nucleons, are packed together tightly in a nucleus. With a radius of about 10&#8722;15 meters, a nucleus is ...

Nuclear Binding Energy

The difference between the calculated and experimentally measured masses is known as the mass defect of the atom. In the case of helium-4, the mass defect ...

Radioactive Decay and Radiometric Dating

Radioactivity is a spontaneous disintegration of an unstable nuclide and is a random process, as all the nuclei in the sample do not decay simultaneously. ...

Nuclear Fission

Many heavier elements with smaller binding energies per nucleon can decompose into more stable elements that have intermediate mass numbers and larger ...

Nuclear Power

Controlled nuclear fission reactions are used to generate electricity. Any nuclear reactor that produces power via the fission of uranium or plutonium by ...

Nuclear Fusion

The process of converting very light nuclei into heavier nuclei is also accompanied by the conversion of mass into large amounts of energy, a process ...

Nuclear Transmutation

Nuclear transmutation is the conversion of one nuclide into another. It can occur by the radioactive decay of a nucleus, or the reaction of a nucleus with ...

Use models to compare nuclear reactions including alpha decay, beta decay and gamma decay; nuclear fusion and nuclear fission.

PS.Chm.1.2

Atomic Orbitals

An atomic orbital represents the three-dimensional regions in an atom where an electron has the highest probability to reside. The radial distribution ...

The Pauli Exclusion Principle

The arrangement of electrons in the orbitals of an atom is called its electron configuration. We describe an electron configuration with a symbol that ...

The Energies of Atomic Orbitals

In an atom, the negatively charged electrons are attracted to the positively charged nucleus. In a multielectron atom, electron-electron repulsions are ...

The Aufbau Principle and Hund's Rule

To determine the electron configuration for any particular atom, we can build the structures in the order of atomic numbers. Beginning with hydrogen, and ...

electron-configuration-of-multielectron-atoms

Electron Configuration of Multielectron Atoms

The alkali metal sodium (atomic number 11) has one more electron than the neon atom. This electron must go into the lowest-energy subshell available, the ...

Use models to explain how electrons are distributed in atoms.

PS.Chm.1.3

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

Atomic Mass

Atoms &mdash; and the protons, neutrons, and electrons that compose them &mdash; are extremely small. For example, a carbon atom weighs less than 2 ...

Molar Mass

The identity of a substance is defined not only by the types of atoms or ions it contains but by the quantity of each type of atom or ion. For example, ...

Use the Periodic Table as a model to predict the relative properties of elements based on the pattern of valence electrons in the outermost energy levels of atoms.

PS.Chm.2.1

atomic-radii-and-effective-nuclear-charge

Atomic Radii and Effective Nuclear Charge

The elements in groups of the periodic table exhibit similar chemical behavior. This similarity occurs because the members of a group have the same number ...

Ionic Radii

Ionic radius is the measure used to describe the size of an ion. A cation always has fewer electrons and the same number of protons as the parent atom; it ...

Ionization Energy

The amount of energy required to remove the most loosely bound electron from a gaseous atom in its ground state is called its first ionization energy ...

Electron Affinity

The electron affinity (EA) is the energy change for adding an electron to a gaseous atom to form an anion (negative ion).



This process can be either ...

Construct an explanation to infer the atomic size, reactivity, electronegativity, and ionization energy of an element based on its position in the Periodic Table.

PS.Chm.2.2

Types of Chemical Bonds

Chemical bonding theories were pioneered by American chemist Gilbert&#xA0;N. Lewis. He developed a model called the Lewis model to explain the type and ...

Lewis Symbols and the Octet Rule

Chemical bonds are complex interactions between two or more atoms or ions, which reduce the potential energy of the molecule. Gilbert N. Lewis developed a ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&#xA0;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

trends-in-lattice-energy-ion-size-and-charge

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&#xA0;

Electronegativity values of ...

bond-polarity-dipole-moment-and-percent-ionic-character

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Resonance

The Lewis structure of a nitrite anion (NO2&minus;) may actually be drawn in two different ways, distinguished by the locations of the N-O and N=O ...

Formal Charges

In some cases, there are seemingly more than one valid Lewis structures for molecules and polyatomic ions. The concept of formal charges can be used to ...

Exceptions to the Octet Rule

Many covalent molecules have central atoms that do not have eight electrons in their Lewis structures. These molecules fall into three categories:


	...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

Analyze and interpret data to explain the mechanisms and properties of the two main types of intramolecular (ionic and covalent) bonds.

PS.Chm.3.1

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

Intermolecular vs Intramolecular Forces

Intermolecular forces (IMF) are electrostatic attractions arising from charge-charge interactions between molecules. The strength of the intermolecular ...

Intermolecular Forces

Atoms and molecules interact through bonds (or forces): intramolecular and intermolecular. The forces are electrostatic as they arise from interactions ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

Construct an explanation to summarize the influences intermolecular forces have on the properties of chemical compounds.

PS.Chm.3.2

Analyze the structure of atoms and isotopes.

Finding the Endpoint in Weak Acid–Base Titration

Description

Transcript

Tags

More videos by Standards