Name: partial derivatives and tangent planes
Uploaded: 2026-06-08T09:38:53.569Z
Duration: 1 min 14 s
Channel: JoVE

假设有一座高度不规则的山丘，其地表各点的高程各不相同，地表上每一点均可用笛卡尔坐标描述。该地形由函数 z = f(x, y) 表示，其中 z 表示平面上点 (x, y) 对应的高程。现在考虑表面上的一个特定点，目标是理解在沿某一特定方向移动时，该点高度如何变化。对 x 的偏导数用于衡量当固定 y 方向、仅沿 x 轴移动时，地形的陡峭程度变化情况。同样，对 y 的偏导数用于衡量在仅沿 y 轴方向移动而保持 x 方向不变时的陡峭程度。偏导数的负值表示沿该方向向下坡移动，而正值则表示向上坡移动。这些斜率共同定义了一个平坦的切平面，该平面与山体相切，描述了该精确点处曲面的整体倾斜程度。

偏导数的解释

由两个变量的函数所定义的曲面可以被可视化为一片广阔而不规则的地形，其中每个点均通过笛卡尔坐标来确定。该地形在任意一点的高度由一个函数决定，该函数为每一对水平坐标赋予一个高度值。这种表示方法使得可以研究曲面在不同方向上高度的变化情况。在该地形上的某个特定点，要理解高度如何变化，需考察沿特定方向移动时的情况。若沿 x 方向移动，同时保持 y 坐标不变，则相应的海拔变化描述了该方向上的陡峭程度。类似地，若沿 y 方向移动，同时保持 x 坐标不变，则可揭示垂直方向上的陡峭程度。这些方向性斜率表明地形是上升还是下降：正值对应上升，负值则表示下降。尽管这些方向性测量提供了有用的见解，但它们仅代表表面的局部切片。当综合考虑时，这些测量定义了一个平面，该平面在给定点附近紧密逼近地形。这个平面被称为切平面，它在该点与表面相切，并反映其整体倾斜情况。切平面作为一种局部线性近似，能够捕捉表面在邻近区域内的变化行为，并提供地形几何特征的简化表示。

https://cloudfront.jove.com/files/ftp_upload/40659/40659_article_thumb_40659.jpeg

Education

教育

JoVE Core

Calculus

微积分

Unit

单元

Partial Derivatives and Gradients

偏导数与梯度

KEY TERMS AND CONCEPTS

关键术语与概念

Interpretations of Partial Derivatives

partial derivatives and tangent planes

Partial derivatives describe how a surface changes in one direction at a time. A surface from a function of two variables can be pictured like uneven terrain. Each point on that terrain is located with Cartesian coordinates, and the function gives the height at each pair of horizontal coordinates.

To study the surface at one point, you can move in a single direction while holding the other variable fixed. If you move along the x-direction and keep y constant, the change in height gives the slope in that direction. If you move along the y-direction and keep x constant, you get the slope in the perpendicular direction.

These directional slopes show whether the surface rises or falls. A positive value means the surface goes up. A negative value means it goes down. Each partial derivative gives only one slice of the surface, but together they show the local tilt.

When the two slopes are considered together, they define a tangent plane. A tangent plane is a flat surface that touches the curved surface at the chosen point. It provides a local linear approximation and shows how the surface behaves near that point.

Partial Derivatives and Tangent Planes

functions of two variables

Graphs of Functions in Three Dimensions

Functions of two variables use two inputs to determine one output. The output depends on both independent variables at the same time. They are often written as z = f(x, y), where each ordered pair in the domain gives one unique output value. The domain of a function of two variables is the region in the horizontal plane that contains the input pairs. Each point in this region matches one output value. That output can be shown as a vertical height above the plane. When all of the heights are...

graphs of two-variable functions

Weather Maps as Two-Variable Surfaces

Weather maps show how a function of two variables can describe temperature across a region. In this setting, each place is identified by two coordinates, longitude and latitude. Since one temperature value is assigned to each coordinate pair, the data can be written as z = f(x, y). The variables x and y represent the horizontal position on the map. The variable z represents temperature. This means that every point (x, y) in the region has a matching temperature value. A graph of this...

level curves and contour maps

Reading Surface Slope with Contour Lines

Contour lines make it possible to read the shape of a surface on a flat map. In mathematics, these lines are called level curves. They show points in a domain where a function of two variables has the same output value. For a function written as z = f(x, y), a level curve is defined by f(x, y) = k, where k is a constant. That constant represents one fixed height or elevation. Along one contour line, the function value stays the same even when the x and y coordinates change. This idea helps...

functions of three or more variables

Level Surfaces of Multivariable Functions

A function of three variables gives one real number for each point in three-dimensional space. Each point is written with Cartesian coordinates, x, y, and z, and the function maps that ordered triple to a single value. These functions are often used to describe physical quantities that change across space. One example is the electric potential created by a point charge. Here, the potential at a location depends only on the distance from the charge. If the charge is placed at the origin, the...

limits of multivariable functions

Path Independence in Multivariable Limits

Path independence is the key idea behind limits of multivariable functions. For a function of two variables, the input can approach a point in the plane from many directions. That makes multivariable limits more complex than single-variable limits, where the input moves along one line and can approach from only two directions. For a function written as z = f(x, y), the notation lim(x,y)→(a,b) f(x,y) = L means the output values move toward L as the point (x, y) gets closer to (a, b). A...

properties of limits in multivariable calculus

properties-of-limits-in-multivariable-calculus

Limit Laws for Multivariable Functions

Limit laws in multivariable calculus give clear rules for finding limits of functions with more than one variable. These rules help break a complex expression into smaller parts whose limits are already known. They are used when [1m\lim_{(x,y)\to(a,b)} f(x,y)=L[0m and [1m\lim_{(x,y)\to(a,b)} g(x,y)=M[0m exist. The sum law says the limit of a sum equals the sum of the limits. The difference law says the limit of a difference equals the difference of the limits. In notation,...

continuity for functions of multiple variables

continuity-for-functions-of-multiple-variables

Testing Continuity with Paths in Two Variables

Continuity in multivariable functions describes how a function with two or more input variables changes near a point. It extends the idea of continuity from single-variable calculus into higher dimensions. This idea is important for modeling real-world situations that vary across space. A multivariable function is continuous at a point only if three conditions are met at the same time. The function must be defined at that point. The limit must exist as the input moves toward the point from any...

introduction to partial derivatives

Partial Derivatives in Real-World Models

Partial derivatives help describe how a multivariable function changes when one input changes and the others stay fixed. In many real-world situations, one output depends on more than one input. A high-tech assembly plant is one example. Total production can depend on technician labor and machine capacity at the same time. This relationship can be written as a continuous function P(T, M), where T stands for technician labor input and M stands for machine capacity. When demand rises but the...

interpretations of partial derivatives

Partial derivatives describe how a surface changes in one direction at a time. A surface from a function of two variables can be pictured like uneven terrain. Each point on that terrain is located with Cartesian coordinates, and the function gives the height at each pair of horizontal coordinates. To study the surface at one point, you can move in a single direction while holding the other variable fixed. If you move along the x-direction and keep y constant, the change in height gives the...

multivariable functions and higher derivatives

multivariable-functions-and-higher-derivatives

Partial Derivatives and Surface Curvature

Partial derivatives and surface curvature help describe multivariable functions. A multivariable function gives one output for each ordered set of inputs. For a function f(x, y), each point (x, y) can be treated as a height z = f(x, y). This creates a surface in three-dimensional space. These functions often appear in physical models and optimization problems, where behavior depends on several changing variables. To study how the function changes in one direction, one variable is held fixed...

partial differential equations

Modeling Waves with Space and Time

Partial differential equations help describe waves that change across both space and time. A stone dropped into a still pond creates circular waves that spread outward. The water surface rises and falls at each point as the wave passes, while the shape of the surface also changes across the pond at any fixed moment. This kind of motion needs a mathematical model that tracks more than one variable at once. At one location, the water level changes as time moves forward. That change includes the...

tangent planes to surfaces

Using Partial Derivatives for Tangent Planes

Partial derivatives help describe a tangent plane for a surface in multivariable calculus. For a surface written as z = f(x, y), the tangent plane at one point gives the best linear approximation near that point. This makes a curved surface easier to study with a simple planar model. To build the tangent plane, take vertical slices through the surface. Hold x constant in one slice and y constant in another slice. Each slice forms a curve on the surface. The tangent lines to those curves at the...

linear approximations

Tangent Plane Estimates for Two Variables

Tangent plane estimates help approximate a differentiable function of two variables near a known point. Instead of using the curved surface directly, the function is replaced by its tangent plane. This gives a fast estimate for values close to the point being studied. For the function f(x,y)=x^2+3y^2, the point (2, 1) is used as the reference. The exact value there is f(2,1)=2^2+3(1)^2=4+3=7. The linear approximation near (a,b) is L(x,y)=f(a,b)+f_x(a,b)(x-a)+f_y(a,b)(y-b). To build the...

multivariable chain rule

Total Derivatives in Connected Variables

Total derivatives in connected variables show how one change can affect several related quantities. Here, z depends on two intermediate variables, x and y, and both x and y change with a third variable, t. The connection is indirect, because t does not appear in the formula for z itself. The goal is to find the total derivative of z with respect to t, written as dz/dt. When the functions are differentiable, the change in z can be split into two parts. One part comes from how z changes with x...

implicit differentiation with partial derivatives

implicit-differentiation-with-partial-derivatives

Finding Tangent Slopes from Implicit Equations

Implicit differentiation with partial derivatives helps find tangent slopes when two variables are linked by one equation. The relationship is not solved for one variable first. Instead, both variables stay connected in the same implicit relation. To work with this kind of equation, one variable is treated as depending on the other. Then the chain rule is applied to every term in the equation. Because of that setup, the derivative includes partial derivatives and also the derivative of the...

directional derivatives

Directional Derivatives in Any Direction

Directional derivatives measure how a surface changes in any chosen direction. In multivariable calculus, partial derivatives show change along one coordinate at a time. For a function of two variables, one partial derivative gives the slope in the x-direction, and the other gives the slope in the y-direction. These single-direction slopes are useful for local behavior. However, many real movements do not follow the coordinate axes. Fluid flow, heat transfer, and motion across uneven terrain...

gradient vectors and their applications

Steepest Ascent and the Gradient Vector

The gradient vector shows the direction of steepest ascent on a surface. In this lesson, a topographical map is used to model land as a height surface that depends on horizontal position. Each point on the map has an elevation, so a hiker at one location can move in many directions, but only one path gives the fastest increase in height. That special path is called the direction of steepest ascent. In multivariable calculus, the gradient vector represents it. The gradient points toward higher...

maximizing the directional derivative

Gradient Direction and Rate of Change

The directional derivative shows how a multivariable function changes at a point when you move in a chosen direction. That direction is written as a unit vector, so only the direction matters and not the length of the vector. Changing the direction changes the rate of change, which is why the directional derivative depends strongly on the path you choose. The directional derivative is found using the gradient vector and a unit direction vector. The gradient tells you both the direction and the...

tangent planes to level surfaces

Gradient Vectors and Tangent Planes

Gradient vectors and tangent planes help describe the shape of a level surface at a point. A level surface is the set of all points in space where a function of three variables has the same fixed value. To understand the local geometry near one point, it is not enough to know the coordinates alone. You also need to know how the surface tilts there. One way to study that tilt is to follow a path that stays on the level surface and passes through the point. This path can be written as a...

significance of the gradient vector

Gradient Vector and Direction of Steepest Rise

The gradient vector describes how a surface changes and where it rises fastest. For a function of two variables, the surface can be studied by looking at how it changes in specific directions. This makes the gradient useful for measuring local steepness at a point. If one variable is held constant, the surface becomes a cross-sectional curve. Moving parallel to a coordinate axis shows how the other variable changes. The slope of that curve at a point gives the directional rate of change in...

local maximum and minimum values

Finding Critical Points in Multivariable Calculus

Multivariable calculus uses critical points to locate local maximum and minimum values on a surface. A local maximum is a point where the function value is higher than at nearby points. A local minimum is a point where the function value is lower than at nearby points. These points are called local extrema, and they matter in optimization problems. Local extrema occur at critical points, where the surface is momentarily flat in all directions. At a critical point, the partial derivatives are...

lagrange multipliers: one constraint

Optimizing a Fence Pen with Lagrange Multipliers

Lagrange multipliers help solve constrained optimization problems. In these problems, you maximize or minimize a quantity while keeping a fixed condition. A common example is a rectangular pen built against a barn wall using 100 meters of fencing. The barn wall makes one side of the pen, so only the other three sides need fencing. The goal is to find the dimensions that give the greatest area. Let L be the length parallel to the wall and W be the width perpendicular to the wall. Then the area...

lagrange multipliers: two constraints

Lagrange Multipliers on an Intersection Curve

Lagrange multipliers with two constraints help find a maximum or minimum when a function must satisfy two conditions at once. The goal may be to optimize cost, area, distance, or energy, but only among solutions that meet both requirements. In many problems, the constraints represent fixed volume, limited resources, or prescribed dimensions. For a function of three variables, each constraint makes a surface in three-dimensional space. A feasible point is a point that satisfies both constraints.

lagrange multipliers: problem solving

Optimizing Silo Design with Lagrange Multipliers

A silo with a cylindrical base and a hemispherical roof can be sized with Lagrange multipliers. This calculus method helps find the best design when the surface area must stay fixed. In this problem, the goal is to maximize storage volume while using a set amount of material. The model uses two main variables: the radius r of the base and the height h of the cylindrical section. The total volume comes from adding the volume of the cylinder and the hemisphere. The fixed surface area includes...

key terms and concepts

Learn how partial derivatives show the slope of a surface in the x and y directions, and how they combine to form a tangent plane at a point.

Partial Derivatives and Tangent Planes | JoVE K12

The JoVE Core Calculus collection provides a comprehensive visual guide to the entire calculus sequence, seamlessly connecting mathematical theory to real-world applications in physics and economics. Through dynamic animated lessons, the course transitions smoothly from foundational single-variable concepts to advanced multivariable topics. Students will explore everything from standard differentiation and integration to spatial vectors, multi-dimensional derivatives, and complex vector fields. By breaking down abstract coordinate systems, infinite series, and spatial motion, this structured approach builds the robust analytical skills and advanced mastery essential for STEM success.

calculus

Partial Derivatives and Tangent Planes

Description

Transcript