Name: beam types and support conditions
Uploaded: 2023-09-22T11:49:26.000Z
Duration: 1 min 30 s
Channel: JoVE

Ein Träger ist ein gerades, langes Strukturbauteil, das dazu dient, Lasten zu tragen, die an verschiedenen Punkten entlang des Bauteils aufgebracht werden.
Balken können basierend auf Geometrie, Querschnitt, Auflagertyp und Gleichgewichtsbedingung klassifiziert werden.
Basierend auf der Geometrie können Balken gerade, konisch oder gekrümmt sein.
Sie können unterschiedliche Querschnittsformen haben, z. B. einen I-Träger, einen T-Träger, einen L-Träger, einen C-Träger oder einen rechteckigen Träger.
Je nach Stütze können Träger in einfach abgestützt, überhängend, durchgehend, auskragend oder fest eingeteilt werden. Der Abstand zwischen den Stützen wird als Spannweite des Balkens bezeichnet.
Ein einfach gelagerter Balken wird an beiden Enden abgestützt, während ein überhängender Balken über eine seiner Stützen hinausragt.
Der Ausleger ist an einem Ende fixiert und erstreckt sich vom festen Ende aus.
Ein durchgehender Balken wird an mehr als zwei Punkten abgestützt, während ein fester Balken an beiden Enden oder an einem Ende abgestützt werden kann.
Die Reaktionen an den Balkenlagern können statisch bestimmt werden, wenn die Lager nur drei Unbekannte umfassen. Wenn zusätzliche Unbekannte vorhanden sind, ist der Strahl statisch unbestimmt.

<ol>
	<li>Bier, F.P.; Johnston, E.R.; Mazurek, D.F.; Cromwell, P.J. und Self, B.P.(2019). Vektormechanik für Ingenieure \u2012 Statik und Dynamik. New York: McGraw-Hill. Seiten 378-379</li>
</ol>

balken

Balken sind integrale Komponenten des Bauingenieurwesens und des Baus, die dazu dienen, Lasten entlang ihrer Länge an verschiedenen Punkten zu tragen. Diese langen, geraden Bauteile können je nach Geometrie, Querschnittsform, Unterstützungstyp und Gleichgewichtszustand klassifiziert werden. Basiert auf der Geometrie können Balken gerade, zugespitzt oder gebogen sein. Gerade Balken sind die häufigste Art und haben einen konstanten Querschnitt über ihre gesamte Länge. Zugespitzte Balken hingegen haben einen sich entlang ihrer Länge verändernden Querschnitt, während gebogene Balken eine gekrümmte Form haben. Balken können auch verschiedene Querschnittsformen aufweisen, wie z.B. I-Träger, T-Träger, L-Träger, C-Träger oder rechteckige Balken. Jede Form ist speziell darauf ausgelegt, einzigartige lasttragende Fähigkeiten zu bieten, abhängig von der Anwendung und den Lasten, die der Balken tragen muss. Die Art der Unterstützung spielt eine entscheidende Rolle bei der Gestaltung und Leistung von Balken. Balken können je nach ihren Auflagerarten als einfach gestützt, überhängend, durchgehend, Ausleger oder fest eingeengt klassifiziert werden. Der Abstand zwischen den Auflagern wird als Spannweite des Balkens bezeichnet. Ein einfach gestützter Balken hat Auflager an beiden Enden, während ein überhängender Balken über eines seiner Auflager hinausragt. Der Auslegerbalken ist an einem Ende fest eingeengt und erstreckt sich von diesem festen Punkt aus. Ein durchgehender Balken hat an mehr als zwei Punkten entlang seiner Länge Unterstützung, und ein fester Balken kann entweder an beiden Enden fest eingeengt sein oder an einem Ende unterstützt und am anderen Ende fest eingeengt sein. Die Reaktionen an den Balkenauflagern können statisch bestimmbar sein, wenn die Auflager nur drei Unbekannte involvieren. Wenn jedoch zusätzliche Unbekannte vorhanden sind, wird der Balken statisch unbestimmbar.

Balken

Balken sind integrale Bestandteile des Hochbaus und der Konstruktion, die dazu bestimmt sind, Lasten aufzunehmen, die an verschiedenen Punkten entlang ihrer Länge aufgebracht werden. Diese...

Education

Lehre

JoVE Core

Mechanical Engineering

Maschinenbau

Unit 1

Einheit 1

Internal Forces

Innere Kräfte

KEY TERMS AND CONCEPTS

KERNBEGRIFFE UND KONZEPTE

Beams

beam types and support conditions

Beams are key parts of structural engineering and construction. They support loads that act at different points along their length. Engineers use beam shape and support conditions to understand how a beam will perform.

Beams can be classified by geometry. Straight beams are the most common and have a constant cross-section along their length. Tapered beams change in cross-section from one end to the other, while curved beams have a curved shape.

Beam cross-section also matters. Common shapes include I-beams, T-beams, L-beams, C-beams, and rectangular beams. Each shape is designed to handle load-bearing needs in a different way, depending on where and how the beam is used.

Supports create another major way to classify beams. A simply supported beam has supports at both ends. An overhanging beam extends beyond one of its supports, while a cantilever beam is fixed at one end and extends outward from that fixed point.

Some beams have more than two supports. A continuous beam has support at more than two points along its length. A fixed beam may be fixed at both ends, or supported at one end and fixed at the other end. The span of a beam is the distance between its supports.

Beam reactions can also be described by equilibrium. A beam is statically determinate if its supports create only three unknowns. If there are more unknowns, the beam is statically indeterminate. This difference is important when analyzing how the beam carries load.

Beam Types and Support Conditions

sign convention

Beam Forces: Tension, Shear, and Bending

Beam analysis depends on the internal forces and moments inside a structure. These include normal force, shear force, and bending moment. Engineers use the method of sections to cut the beam and find these values. A sign convention helps show whether each result is positive or negative. Normal force acts perpendicular to the beam’s cross-section. It can pull the material in tension or push it in compression. Tension is taken as positive, while compression is taken as negative. This makes it...

normal and shear force

Beam Loads and Internal Forces

Beam loads create internal forces inside a structure. Weight, pressure, and other external forces can all act on a beam. These internal forces affect the beam’s stability and strength. Engineers study these forces to find their size and direction. A common approach is the method of sections. In this method, an imaginary cut is made at a chosen point on the beam, and the forces at that section are analyzed. One internal force is the normal force, also called the axial force. It acts...

bending and torsional moments

Forces That Bend and Twist Materials

Bending and torsional moments describe how materials respond to force. These ideas are important in structural engineering because they help explain how beams, rulers, and screws change shape under load. A moment depends on both the size of the force and the distance from the point of interest to the force’s line of action. A bending moment forms when an external force makes a structural element bend. If the element bends upward, the top side is in compression and the bottom side is in tension.

internal loadings in structural members: problem solving

internal-loadings-in-structural-members-problem-solving

Beam Internal Force Analysis at Point A

Beam internal force analysis shows how normal force, shear force, and bending moment act inside a structural member. These internal loadings help engineers check whether a beam can support the external forces applied to it. The example uses a beam OC that weighs 5 kN and is inclined at 53.13° with the horizontal. The beam is supported at both ends. The goal is to find the internal loadings at point A. The first step is to find the reaction force at point C. This is done by taking the moment...

beams

Beams are key parts of structural engineering and construction. They support loads that act at different points along their length. Engineers use beam shape and support conditions to understand how a beam will perform. Beams can be classified by geometry. Straight beams are the most common and have a constant cross-section along their length. Tapered beams change in cross-section from one end to the other, while curved beams have a curved shape. Beam cross-section also matters. Common shapes...

shear diagram

Beam Shear Force Diagram

Beam shear force diagrams show how shear changes along the length of a supported beam. In beam mechanics, they help students track the internal shear force caused by perpendicular loads. The beam AB in this example is supported at both ends, so the first step is to draw a free-body diagram that shows the external forces and internal reactions. The reaction forces at supports A and B are found with equilibrium equations for force and moment. For the beam shown, the vertical reaction at A is 24...

bending moment diagram

Beam Load Analysis with Moment Diagrams

Beam load analysis uses a bending moment diagram to show how bending changes along the length of a beam. This diagram helps engineers and designers check whether a structure can handle applied forces. It is also useful for parts such as shelving arms, which must resist forces and moments from a load. To build the diagram, start by finding the reactive forces and any couple moments on the beam. In some cases, especially when a beam is inclined, these forces must be resolved into components that...

relation between the distributed load and shear

relation-between-the-distributed-load-and-shear

Shear Change Under Distributed Loading

Shear force changes along a beam under a distributed load. In structural analysis, this relationship helps explain how beams respond to loading conditions that also include concentrated loads and a couple moment. To study the link, consider a small beam section that has no concentrated load or couple moment on it. Draw a free-body diagram for that elemental section. It includes the distributed load along the beam, the shear force V(x) on the right-hand side of the cut, and a small added shear...

relation between the shear and bending moment

relation-between-the-shear-and-bending-moment

Shear and Moment Diagrams in Beam Loads

Shear and moment diagrams help show how a beam responds to loads. A beam can carry a distributed load, concentrated loads, and a couple moment. These loads create internal shear forces and bending moments. The beam is examined by isolating a small elemental section and drawing a free-body diagram. For that section to stay in equilibrium, the moment on the right side must be slightly larger than the moment on the left side. The distributed load also has a resultant force that acts at a...

shear and bending moment diagram: problem solving

shear-and-bending-moment-diagram-problem-solving

Beam Load Analysis with Shear Diagrams

Beam load analysis uses shear and bending moment diagrams to track the internal forces in a beam. These diagrams are important when a beam carries concentrated loads and a distributed load. They help show how the beam responds so structures can be designed safely and efficiently. The first step is to draw a free-body diagram of the whole beam. A free-body diagram shows the concentrated loads, the distributed load, and the reaction forces at the supports. Use the equilibrium equations, where...

cable subjected to concentrated loads

Finding Tension in a Loaded Cable

Flexible cables can carry vertical point loads between two fixed supports. The cable is treated as flexible, inextensible, and nearly weightless. Under these conditions, it changes shape to form straight-line segments, and each segment carries a constant tensile force. To analyze the cable, a free-body diagram is drawn for the whole cable. This helps identify the reaction forces at the supports. In many cases, the number of unknown reaction components is greater than the available equilibrium...

cable subjected to a distributed load

Finding Cable Shape Under Distributed Load

Cable shape under a distributed load is found by analyzing the forces along a small piece of the cable. This method is important in suspension bridge design because the main cables must carry changing loads safely. The load causes the tensile force in the cable to change, and it also creates cable deformation. The analysis starts with a free-body diagram of a short cable segment. The diagram shows the distributed load and the change in tensile force across that segment. Equilibrium equations...

cable subjected to its own weight

Cable Sag Under Its Own Weight

Overhead power transmission cables sag under their own weight, and that shape affects how they carry electricity across long distances. To study this behavior, the cable is analyzed with a generalized loading function. This function treats the load along the cable's arc length instead of its projected length, which gives a more accurate picture of the cable's response. The analysis then focuses on a small cable segment. A free-body diagram is drawn to show the forces acting on that segment.

cable: problem solving

Cable Tension Under Uniform Loading

Cable tension under uniform loading is found by analyzing a cable fixed between two supports. The problem starts with the support conditions and the load on the cable. From there, the cable’s shape must be described with an equation that matches the curve formed by the load. The next step is to integrate the shape equation to get the cable’s shape function. This makes it possible to solve for constants in the equation. The boundary condition at the origin gives one constant. The slope, which...

key terms and concepts

Learn how beams are classified by shape, cross-section, supports, span, and equilibrium. Explore simply supported, cantilever, continuous, and fixed beams.

Beam Types and Support Conditions | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Beam Types and Support Conditions

Description

Transcript

Tags