Name: resistive touchscreen voltage mapping
Uploaded: 2024-04-11T12:48:28.000Z
Duration: 1 min 14 s
Channel: JoVE

K12 Standards

Texas Essential Knowledge and Skills

High School

Specialised Topic in Science

112.51.c.1.

112.51.c.2.D.

Design Example: Resistive Touchscreen

Ein Geräteingenieur hat die Aufgabe, eine resistive Touchscreen-Schnittstelle für ein mobiles Gerät zu entwerfen. Es besteht aus zwei leitfähigen Schichten: einer flexiblen oberen Schicht und einer starren unteren Schicht, die durch einen schmalen Spalt getrennt sind.
Der Widerstand zwischen den beiden Schichten ist hoch. Beim Berühren des Bildschirms berühren sich die beiden Schichten an einem Punkt, der als Berührungspunkt bezeichnet wird, wodurch der Widerstand zwischen den Schichten verringert wird.
Um die genaue Position des Touchpoints zu bestimmen, wird der Touchscreen zu einem eindimensionalen System vereinfacht.
Die Deckschicht zeichnet sich durch ihre Länge, ihren spezifischen Widerstand und ihre Querschnittsfläche aus und ist am Berührungspunkt in zwei Teile unterteilt, deren Widerstände proportional zu ihrer Länge sind.
Wenn eine Spannungsquelle zwischen den beiden Enden der Deckschicht geschaltet ist, ähnelt die Schaltung einer Spannungsteilerschaltung, und der Spannungsabfall am Berührungspunkt hängt von diesen beiden Widerständen ab.
Durch Einsetzen der Widerstandswerte und Lösen der Gleichung ergibt sich die Beziehung zwischen dem Spannungsabfall am Berührungspunkt und seiner Position.
An jedem Berührungspunkt ist die Spannung unterschiedlich, was dazu beiträgt, den Standort genau zu bestimmen.

designbeispiel: resistiver touchscreen

Ein Geräteingenieur spielt eine entscheidende Rolle bei der Gestaltung von Benutzeroberflächen für mobile Geräte. Eine solche Schnittstelle ist der resistive Touchscreen, der im Wesentlichen aus zwei metallischen Schichten besteht: einer flexiblen oberen Schicht und einer starren unteren Schicht, getrennt durch einen schmalen Spalt. Der hohe Widerstand zwischen diesen beiden Schichten ist ein Schlüsselmerkmal dieses Designs. Wenn ein Benutzer den Bildschirm berührt, kommen die beiden Schichten an einem spezifischen Punkt, bekannt als Berührungspunkt, in Kontakt. Dieser Kontakt verringert den Widerstand zwischen den Schichten und ändert effektiv die elektrischen Eigenschaften des Touchscreens an diesem Punkt. Um jedoch den genauen Ort des Berührungspunktes genau zu bestimmen, muss der Touchscreen als ein eindimensionales System vereinfacht werden. Die obere Schicht, charakterisiert durch ihre Länge, Resistivität und Querschnittsfläche, wird konzeptionell am Berührungspunkt in zwei Teile geteilt. Die Widerstände dieser beiden Abschnitte sind proportional zu ihren Längen. Durch das Verbinden einer Spannungsquelle zwischen den beiden Enden der oberen Schicht wird die Schaltung in eine Spannungsteilerkonfiguration umgewandelt. Der Spannungsabfall am Berührungspunkt hängt von den Widerständen der beiden Abschnitte der oberen Schicht ab. Indem man die Widerstandswerte in die Gleichung des Spannungsteilers einsetzt und sie löst, kann eine Beziehung abgeleitet werden zwischen dem Spannungsabfall am Berührungspunkt und seiner Position. Diese Beziehung ermöglicht es dem Gerät, die genaue Position des Berührungspunktes basierend auf der Änderung der Spannung zu berechnen. Das bedeutet, dass jedem Berührungspunkt eine unterschiedliche Spannung entspricht, was es dem System ermöglicht, die Position der Berührung des Benutzers genau zu lokalisieren. Diese Präzision ist entscheidend für die Funktionalität der Touchscreen-Schnittstelle und gewährleistet, dass sie genau auf die Eingaben des Benutzers reagiert.

Designbeispiel: Resistiver Touchscreen

Ein Geräteingenieur hat die Aufgabe, eine resistive Touchscreen-Schnittstelle für ein mobiles Gerät zu entwerfen. Es besteht aus zwei leitfähigen Schichten: einem flexiblen Obermaterial ...

Education

Lehre

JoVE Core

Electrical Engineering

Elektrotechnik

Unit 1

Einheit 1

Basics of Electric Circuits

Grundlagen elektrischer Stromkreise

KEY TERMS AND CONCEPTS

ZENTRALE BEGRIFFE UND KONZEPTE

resistive touchscreen voltage mapping

A resistive touchscreen uses voltage mapping to locate a finger touch on a mobile device. It is built from two metallic layers. The top layer is flexible, and the bottom layer is rigid. A narrow gap separates them, and the high resistance between the layers is an important part of the design.

When a user touches the screen, the two layers meet at one point. That contact point is called the touchpoint. The touch lowers the resistance between the layers at that spot and changes the electrical behavior of the screen. This change is what lets the system detect input.

To find the exact touch location, the touchscreen is simplified as a one-dimensional system. The top layer is described by its length, resistivity, and cross-sectional area. At the touchpoint, the top layer is split into two parts. The resistance of each part depends on its length.

A voltage source is connected to the two ends of the top layer. This setup creates a voltage divider circuit. The voltage drop at the touchpoint depends on the resistance of the two sections. By using the voltage divider equation and solving for position, the device can match each touchpoint to a distinct voltage and calculate the exact touch location.

Resistive Touchscreen Voltage Mapping

charge and current

Electric Charge in Circuits

Electric charge in circuits explains how charged particles behave in matter and how current is produced. Everyday static effects, like a wool sweater sticking to the body or a shock from a carpet, show charge in action. Charge is an inherent property of atomic particles and is measured in coulombs (C). Matter is made of atoms with electrons, protons, and neutrons. Electrons carry a negative charge (-e), and protons carry a positive charge (+e). These two charges have the same magnitude. An...

voltage

Voltage in Electric Circuits

Voltage in electric circuits is the energy needed to move electric charge between two points. It is also called electromotive force, or EMF. In most circuits, an external force such as a battery provides this energy for electron movement in a conductor. The voltage between points a and b is written as v_ab. It is defined as the work, or energy, needed to move a unit charge from point a to point b. In the equation, w is the energy in joules and q is the charge in coulombs. Voltage is measured...

power and energy

Circuit Power, Absorption, and Supply

Circuit power, absorption, and supply explain how much energy an element uses or delivers in an electric circuit. These ideas matter in electrical engineering because power and energy calculations help describe circuit behavior. A 100-watt light bulb, for example, emits more light than a 60-watt bulb, so wattage is a useful measure in real devices. Power is the time rate of expending or absorbing energy. It is measured in watts, written as W. The relation between power and energy uses the...

electric circuit elements

Circuit Elements: Passive, Active, and Linear

Circuit elements are the building blocks of an electric circuit. An electric circuit is the connection of these elements. In this context, circuit elements are often grouped by how they behave and whether they supply energy. One major group is passive elements. These elements do not generate energy. Common passive elements include resistors, capacitors, and inductors. The other group is active elements, which can generate energy. Generators, batteries, and operational amplifiers are typical...

circuit terminology

Circuit Parts: Branches, Nodes, and Loops

Circuit parts like branches, nodes, loops, and meshes help describe how electrical networks work. An electrical network is a system of connected elements, such as resistors, capacitors, inductors, and voltage or current sources. Unlike a circuit, a network does not have to form a closed path. A circuit is also made of connected electrical elements, but it must include one or more closed paths. These loops let current flow continuously, which is what makes the circuit operate. Because of this,...

independent and dependent sources

Circuit Source Symbols and Controls

Circuit sources in electrical circuits can be independent or dependent. They provide the power a circuit needs to operate. Independent voltage sources supply a fixed voltage, and independent current sources supply a fixed current. Their output does not change because of other parts in the circuit. These sources use standard symbols in circuit diagrams. An independent voltage source is shown with + and - signs to mark the potential difference. An independent current source is shown with an...

ohm's law

Resistance and Conductance in Circuits

Resistance and conductance help explain how electric current moves through a circuit. Resistors are basic circuit parts made from metallic alloys or carbon compounds. They are used to model how a material resists current and to control and regulate electrical power in a circuit. Ohm's law describes the link between voltage and current across a resistor. The voltage across a resistor is directly proportional to the current through it. The constant that sets this relationship is resistance.

kirchhoff's current law

Kirchhoff's Current Law at Circuit Nodes

Kirchhoff's Current Law explains how current behaves at a circuit node. A node is the point where two or more circuit elements meet. The law says the current entering a node equals the current leaving it. That balance follows the rule of charge conservation, which means electric charge is not lost at the junction. When applying KCL, currents entering the node are treated as positive and currents leaving the node are treated as negative. The currents can be added algebraically at the node, and...

kirchhoff's voltage law

Voltage Balance in Closed Circuit Loops

Kirchhoff's Voltage Law explains how voltage is balanced in a closed circuit loop. It is a basic rule in electrical engineering and comes from the idea of energy conservation. Energy can change form, but it cannot be created or destroyed. KVL states that the algebraic sum of all voltages around a closed path, or loop, is zero. In other words, the total voltage supplied in a loop equals the total voltage drop across the components in that loop. A loop can be traced clockwise or anticlockwise,...

voltage dividers

Series Resistors and Voltage Split

Series resistors split voltage across a circuit. In a series setup, resistors are linked one after another. The same current flows through each resistor in the chain. To analyze this behavior, Ohm's law is used to relate voltage, current, and resistance. Kirchhoff's voltage law says the voltages around a series loop add up to the source voltage. That means the current in the circuit equals the source voltage divided by the total resistance in series. The current value can then be used in Ohm's...

current dividers

Parallel Resistors and Current Division

Parallel resistors share the same two nodes, so each resistor has the same voltage across it. In this circuit setup, Kirchhoff's current law applies. The source current equals the sum of the currents through each branch. Ohm's law helps find the branch currents from the source voltage and the resistor values. The source current is equal to the source voltage times the sum of the reciprocals of the resistances. This makes it easier to calculate how current divides in the circuit. The current...

equivalent resistance

Delta-Wye Network Conversion

Delta-wye network conversion helps analyze resistor circuits that are not arranged in simple series or parallel paths. These three-terminal equivalent networks use the wye (Y), also called tee (T), and the delta (Δ), also called pi (π), as practical circuit models. These networks are useful in many circuit settings. They appear in three-phase electrical systems, electrical filters, and matching networks. They can also be used on their own or combined with more complex circuits. A delta...

design example: resistive touchscreen

A resistive touchscreen uses voltage mapping to locate a finger touch on a mobile device. It is built from two metallic layers. The top layer is flexible, and the bottom layer is rigid. A narrow gap separates them, and the high resistance between the layers is an important part of the design. When a user touches the screen, the two layers meet at one point. That contact point is called the touchpoint. The touch lowers the resistance between the layers at that spot and changes the electrical...

key terms and concepts

Learn how a resistive touchscreen uses two conductive layers, a voltage divider, and touchpoint resistance changes to locate a finger on a mobile device.

Resistive Touchscreen Voltage Mapping | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

The Scientific Method

The scientific method is a detailed, empirical problem-solving process used by biologists and other scientists. This iterative approach involves ...

Inductive Reasoning

Inductive reasoning is a form of logical thinking that uses related observations to arrive at a general conclusion. It is uncertain and operates in ...

Deductive Reasoning

Deductive reasoning, or deduction, is the type of logic used in hypothesis-based science. In deductive reasoning, the pattern of thinking moves in the ...

Correlation and Causation

Correlation and CausationStatistical tests can calculate whether there is a relationship, or correlation, between independent and dependent variables. A ...

Ask questions and define problems related to specialized topics of study based on observations or information from text, phenomena, models, or investigations;

112.51.c.1.A.

Scientific Method

The scientific method is used to solve problems and explain phenomena. The development of the scientific method coincided with changes in philosophy ...

Demonstrating the Scientific Method with Tree Branches
ExpandObtain branches containing a few dozen typical leaves from five different local tree species. ...

Observation and Background Research
ExpandNOTE: The first two steps in the scientific process involve studying and observing natural phenomena of ...

Problem-Solving

A problem-solving strategy is a plan of action used to find a solution. It involves trial and error, algorithms, heuristics, and insights. Effective ...

Problem Definition

Problem definition is the initial and the most essential step in research.
The researcher identifies and explains the specific issue or gap to be ...

Apply science practices related to specialized topics of study to plan and conduct investigations or use engineering practices to design solutions to problems;

112.51.c.1.B.

Proper Personal Protective Equipment

Robert M. Rioux &#38; William A Elliott, Pennsylvania State University, University Park, PA
Hazards are many and varied in the laboratory, but the right ...

Emergency Eyewash and Shower Stations

Robert M. Rioux, Pennsylvania State University, University Park, PA
The Occupational Safety and Health Administration (OSHA) mandates that an emergency ...

Electrical Safety

Robert M. Rioux &amp; Suprita Jharimune, Pennsylvania State University, University Park, PA
Among the many hazards present in the laboratory, electrical ...

Working with Centrifuges

Source: Robert M. Rioux &amp; Suprita Jharimune, Pennsylvania State University, University Park, PA
Earth's gravitational force is capable of separating ...

Working with Hot and Cold Sources

Source: Robert M. Rioux &amp; Suprita Jharimune, Pennsylvania State University, University Park, PA
Working with extreme temperatures, both high and low, ...

guidelines-in-case-of-a-laboratory-emergency

Guidelines in Case of a Laboratory Emergency

Robert M. Rioux &amp; Zhifeng Chen, Pennsylvania State University, University Park, PA
The most common laboratory emergencies include chemical spills, ...

chemical-storage-categories-hazards-and-compatibilities

Chemical Storage: Categories, Hazards And Compatibilities

Source: Robert M. Rioux &amp; Taslima A. Zaman, Pennsylvania State University, University Park, PA
While the use of various chemicals in experimental ...

Safe Handling of Mineral Acids

Source: Robert M. Rioux &#38; Taslima A. Zaman, Pennsylvania State University, University Park, PA
A mineral acid (or inorganic acid) is defined as a ...

Handling Chemical Spills

Source: Robert M. Rioux &#38; Taslima Zaman, Pennsylvania State University, University Park, PA
Since chemicals are commonly used for laboratory research ...

Proper Use of Autoclaves

Robert M. Rioux &amp; Zhifeng Chen, Pennsylvania State University, University Park, PA
Autoclaving is one of the most commonly used methods in the ...

Fume Hoods and Laminar Flow Cabinets

Robert M. Rioux &amp; William A. Elliott, Pennsylvania State University, University Park, PA
Fume hoods and laminar flow cabinets are engineering controls ...

Decontamination for Laboratory Biosafety

Robert M. Rioux and Zhifeng Chen, Pennsylvania State University, University Park, PA
Decontamination is essential for laboratory biosafety, as the ...

Proper Waste Disposal

Robert M. Rioux and Taslima A. Zaman, Pennsylvania State University, Pennsylvania, PA

Users are responsible for the proper disposal of the waste ...

Use appropriate safety equipment and practices during laboratory, classroom, and field investigations as outlined in Texas Education Agency-approved safety standards;

112.51.c.1.C.

Common Lab Glassware and Uses

Source: Laboratory of Dr. Neal Abrams &#8212; SUNY College of Environmental Science and Forestry
Glassware is a regular appearance in the professional ...

Lab Techniques

Measurement Accuracy
The ability to repeat an experiment and get the same results, or reproducibility, is essential in scientific research. However, ...

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Preparation of LaboratoryExpand
	Here we show the laboratory preparation for 10 students ...

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Determining the Density of an EggExpand
	Density is a measure of how compact a substance or ...

Proper Lab Notebook Keeping

Organic Lab Notebook Keeping
Record keeping is a vital skill in science and organic chemistry labs. Without proper notes, descriptions, quantities, or ...

Source: Lara Al Hariri at the University of Massachusetts Amherst, MA, USA

	Preparation of the LaboratoryExpand
	Here, we show the laboratory preparation ...

Source: Lara Al Hariri and Ahmed Basabrain at the University of Massachusetts Amherst, MA, USA

	Nitration of Methyl BenzoateExpand
	From this lab onward, ...

Use tools appropriate to the specialized topic of study;

112.51.c.1.D.

SI Units: 2019 Redefinition

Measurement is integral to analytical chemistry. Each record comprises a number &#8211; denoting the magnitude&#160; &#8211; and the unit &#8211; a ...

International System of Units

The International System of Units, known as the SI system, is a universally accepted measurement system recognized and used worldwide. The SI system is ...

Measurement: Standard Units

Every measurement provides three kinds of information: the size or magnitude of the measurement (a number), a standard of comparison for the measurement ...

Measurement: Derived Units

The International System of Units or SI system, by international agreement, has fixed measurement units for seven fundamental properties: length, mass, ...

Collect quantitative data using the International System of Units (SI) or qualitative data as evidence as appropriate to the specialized topic of study;

112.51.c.1.E.

Review and Preview

Data are individual items of information obtained from a population or sample. Data may be classified as qualitative (categorical), quantitative ...

What is a Frequency Distribution

A frequency is the number of times a value of the data occurs. The sum of all the frequency values represents the total number of students included in the ...

Cumulative Frequency Distribution

A cumulative frequency distribution is another type of frequency distribution. Instead of reporting how many data values fall in some classes, it reports ...

Ogive Graph

An ogive graph is sometimes called a cumulative frequency polygon. It is one type of frequency polygon that shows cumulative frequency. In other words, ...

Histogram

The histogram is a graphical representation in the x-y form of data distribution in a data set. The horizontal x-axis is labeled with what the data ...

Relative Frequency Histogram

The relative frequency depicts the proportion of data points that have each value. The frequency tells the number of data points that have each value. ...

Scatter Plot

The most common and easiest way to display the relationship between two variables, x and y, is a scatter plot. A scatter plot shows the direction of a ...

Time-Series Graph

A time-series graph is a line graph with repeated measurements taken at successive intervals of time. It is also called a time series chart. To construct ...

Bar Graph

A bar graph is also called a bar chart and consists of bars that are separated from each other. It either uses horizontal or vertical bars to show ...

Multiple Bar Graph

As the name suggests, a multiple bar graph is the same as a bar graph but has multiple bars to depict relationships between different data values. One can ...

Pareto Chart

A Pareto chart is a bar graph or a combination of both line and bar graphs. The bar lengths represent the individual values or the frequency, while the ...

Pie Chart

A pie chart (or a pie graph) is a circular graphical chart or a pictorial representation of categorical data. It is divided into slices of pie each ...

Organize quantitative or qualitative data using representations appropriate to the specialized topic of study such as scatter plots, line graphs, bar graphs, charts, data tables, diagrams, scientific drawings, and student-prepared models;

112.51.c.1.F.

Modeling and Similitude

A scaled model of a dam is tested in a controlled environment to observe how it will manage water flow, turbulence, and pressure.
This setup predicts the ...

Typical Model Studies

Typical model studies analyze scaled-down systems to predict fluid behavior, focusing on interactions with free surfaces and flow around immersed bodies.
...

design-example-creating-a-hydraulic-model-of-a-dam-spillway

Design Example: Creating a Hydraulic Model of a Dam Spillway

A hydraulic model of a dam spillway is often created by scaling down the design, typically to a 1:15 ratio, to replicate key flow characteristics such as ...

Models, Theories, and Laws

Scientists frequently use models to help them comprehend a specific collection of phenomena. In physics, a model is a condensed version of a physical ...

/files/media/science-education/science-education-thumbs/14686.jpg

Concepts and Prototypes

The human nervous system translates sensory stimuli into neural impulses, which the brain processes into information as thoughts and memories, forming ...

Molecular Models

Physical models representing molecular architectures of chemical compounds play essential roles in understanding chemistry. The use of molecular models ...

Develop and use models to represent phenomena, systems, processes, or solutions to problems as appropriate to the specialized topic of study; and

112.51.c.1.G.

Scientific Laws and Theories

Scientific Laws

In science, a law is defined as a concise, verbal or mathematical, statement that summarizes a vast number of experimental observations. ...

Distinguish among scientific hypotheses, theories, and laws as appropriate to the specialized topic of study.

112.51.c.1.H.

Identify advantages and limitations of models such as their size, scale, properties, and materials as appropriate to the specialized topic of study;

112.51.c.2.A.

Introduction to Statistics

The science of statistics involves collecting, analyzing, interpreting, and presenting data. The method of collecting, organizing, and summarizing data is ...

Statistical Analysis: Overview

An analysis is usually conducted by replicated sampling or repeated measurements on the same sample. This leads to scattered results rather than a single ...

systematic-error-methodological-and-sampling-errors

Systematic Error: Methodological and Sampling Errors

Systematic errors, depending on their source, are of four types &#8211; sampling, instrumental, method, and personal errors.
Sampling errors occur due to ...

Random Error

Indeterminate or random errors arise from several uncontrollable variables in successive measurements.
Since these errors can neither be predicted nor ...

types-of-errors-detection-and-minimization

Types of Errors: Detection and Minimization

Error is the deflection of an obtained result from the expected or true results of an experiment. This happens due to the uncertainty associated with the ...

Analyze data appropriate to the specialized topic of study by identifying significant statistical features, patterns, sources of error, and limitations;

112.51.c.2.B.

Scientific and engineering practices. The student, for at least 40% of instructional time, asks questions, identifies problems, and plans and safely conducts classroom, laboratory, and field investigations to explain phenomena or design solutions using appropriate tools and models. The student is expected to:

Resistive Touchscreen Voltage Mapping

Description

Transcript

Tags

More videos by Standards