Name: operational amplifier pinout and signal use
Uploaded: 2026-08-04T13:22:01.942Z
Duration: 1 min 17 s
Channel: JoVE

The temperature detector fire alarm system consists of a thermistor sensor that initiates a small current flow in case of a fire. This signal is too weak to trigger the alarm system. So, the signals are amplified by an operational amplifier, often called an op amp, to activate the alarm system.
Op amp&#x27;s are commercially available in a variety of integrated circuit packages. One of the most common is the LM741, sold in an eight-pin dual in-line package.
Typically, an op amp has eight pins: two input pins, one output pin, two power supply pins, and three additional pins for offset null or balance.
The circuit symbol for an op amp is a triangle, with the inverting input marked with a minus sign and the non-inverting input with a plus sign.
An op amp, in conjunction with other circuit elements, can also perform a broad range of signal-processing operations.
Additional power supplies are used to bias the operational amplifier. The current drawn from power supplies is the sum of the output current and the current required to power the amplifier internal circuitry.

operationsverstärker

Operational Amplifiers

Der Operationsverst&#xE4;rker, oft als Op-Amp bezeichnet, ist ein vielseitiger Baustein einer Schaltung. Diese elektronische Komponente funktioniert wie eine spannungsgesteuerte Spannungsquelle und kann auch verwendet werden, um eine spannungs- oder stromgesteuerte Stromquelle zu erstellen. Das Design eines Operationsverst&#xE4;rkers erm&#xF6;glicht es ihm, mathematische Operationen auszuf&#xFC;hren, wenn externe Komponenten wie Widerst&#xE4;nde und Kondensatoren an seine Anschl&#xFC;sse angeschlossen sind. Ein Op-Amp hat die F&#xE4;higkeit, Signale zu summieren, ein Signal zu verst&#xE4;rken, es zu integrieren oder zu differenzieren. Op-Amps sind aufgrund ihrer Anpassungsf&#xE4;higkeit, Erschwinglichkeit und Benutzerfreundlichkeit in praktischen Schaltungsentw&#xFC;rfen beliebt. Ein Op-Amp besteht aus einem komplexen Netzwerk von Widerst&#xE4;nden, Transistoren, Kondensatoren und Dioden. Op-Amps sind kommerziell in verschiedenen Formen von integrierten Schaltungspaketen erh&#xE4;ltlich. Ein verbreiteter Typ ist das achtbeinige Dual-in-Line-Paket (DIP), wie in Figure 1 dargestellt. <img alt="Figure1" src="/files/ftp_upload/15076/15076_PT_Figure_1.svg" style="text-align: center; height: 160px;" /> Figure 1: Eine typische Op-Amp-Pin-Konfiguration Pin 8 wird nicht verwendet, und die Pins 1 und 5 sind von untergeordneter Bedeutung. Die f&#xFC;nf wichtigen Anschl&#xFC;sse sind der invertierende Eingang (Pin 2), der nicht-invertierende Eingang (Pin 3), der Ausgang (Pin 6), die positive Stromversorgung V (Pin 7) und die negative Stromversorgung V (Pin 4). Das Schaltungssymbol f&#xFC;r den Op-Amp ist ein Dreieck, wie in Figure 2 gezeigt. <img alt="Figure2" src="/files/ftp_upload/15076/15076_PT_Figure_2.svg" style="text-align: center; height: 208px;" /> Figure 2: Ein typisches Op-Amp-Schaltungssymbol Der Op-Amp hat zwei Eing&#xE4;nge und einen Ausgang, wobei die Eing&#xE4;nge mit einem Minus (-) und einem Plus (+) gekennzeichnet sind, um invertierende und nicht-invertierende Eing&#xE4;nge zu kennzeichnen. Ein am nicht-invertierenden Terminal angelegtes Eingangssignal erscheint mit derselben Polarit&#xE4;t am Ausgang, w&#xE4;hrend ein am invertierenden Terminal angelegtes Eingangssignal invertiert am Ausgang erscheint. Als aktive Komponente ben&#xF6;tigt der Op-Amp eine Spannungsversorgung f&#xFC;r den Betrieb. Der von den Stromversorgungen gezogene Strom ist eine Kombination aus dem Ausgangsstrom und dem Strom, der ben&#xF6;tigt wird, um die interne Schaltung des Verst&#xE4;rkers zu betreiben.

Operationsverstärker

The temperature detector fire alarm system consists of a thermistor sensor that initiates a small current flow in case of a fire. This signal is too weak ...

https://cloudfront.jove.com/files/media/science-education/science-education-thumbs/15076.jpg

Education

Lehre

JoVE Core

Electrical Engineering

Elektrotechnik

Unit 1

Einheit 1

KEY TERMS AND CONCEPTS

ZENTRALE BEGRIFFE UND KONZEPTE

operational amplifier pinout and signal use

An operational amplifier, or op-amp, is a flexible circuit building block used in many electronic designs. It can act like a voltage-controlled voltage source, and it can also be used to create a voltage- or current-controlled current source. When resistors and capacitors are connected to its terminals, an op-amp can perform mathematical operations on signals.

Op-amps are able to sum signals, amplify a signal, integrate it, or differentiate it. These features make them useful in practical circuit work. They are popular because they are adaptable, affordable, and easy to use.

An op-amp is built from a network of resistors, transistors, capacitors, and diodes. It is often sold as an integrated circuit in an eight-pin dual in-line package, or DIP. In that package, pin 8 is not used, and pins 1 and 5 are of minor concern.

The five important terminals are the inverting input on pin 2, the noninverting input on pin 3, the output on pin 6, the positive power supply V on pin 7, and the negative power supply V on pin 4. The circuit symbol is a triangle. The op-amp has two inputs and one output, with minus (-) and plus (+) marks showing the inverting and noninverting inputs.

A signal applied to the noninverting terminal appears with the same polarity at the output. A signal applied to the inverting terminal appears inverted at the output. Because the op-amp is an active component, it needs a voltage supply to operate. The current drawn from the supplies includes both the output current and the current needed for the amplifier’s internal circuitry.

Operational Amplifier Pinout and Signal Use

operational-amplifier-pinout-and-signal-use

operational amplifiers

An operational amplifier, or op-amp, is a flexible circuit building block used in many electronic designs. It can act like a voltage-controlled voltage source, and it can also be used to create a voltage- or current-controlled current source. When resistors and capacitors are connected to its terminals, an op-amp can perform mathematical operations on signals. Op-amps are able to sum signals, amplify a signal, integrate it, or differentiate it. These features make them useful in practical...

characteristics of opamp

Op-Amp Gain, Feedback, and Saturation

An operational amplifier, or op-amp, is an electronic circuit component used with other circuit parts to carry out a signal-processing task. It is often described with an equivalent circuit model. In that model, the output section includes a voltage-controlled source in parallel with the output resistance, R o. The model also shows the input resistance, R i, which is the Thevenin equivalent resistance seen at the input terminals. The differential input voltage, v d, is the difference between...

design example: vintage mixing console

Op-Amp Preamp for a Vintage Console

A sound engineer designs an op-amp pre-amplifier for a vintage mixing console. The console’s output is too low for modern recording equipment, so the signal must be boosted before it can be used. The goal is to build a preamp that raises the audio level without changing the console’s character. The design must meet three clear requirements. It needs a gain of 10, an input impedance above 10 kilo-ohms so the console is not overloaded, and a frequency range that covers the full audio spectrum...

cascaded op amps

Op Amp Stages in Series

Operational amplifiers can be connected in series as separate stages. This cascade works because op-amps have very high input resistance and very low output resistance. Those properties help each stage keep its input-output relationship while driving the next stage. In a cascaded op-amp circuit, the output of one stage becomes the input of the next. Each stage adds gain to the signal as it passes through. The overall gain is the product of the gain of each stage. This design can improve...

inverting and non-inverting opamps

Op-Amp Gain: Inverting, Noninverting, Buffer

Operational amplifiers can be used as inverting, noninverting, and buffer amplifiers. In these circuits, the output voltage depends on the input voltage and the resistor setup around the op-amp. In an inverting amplifier, the input voltage is sent through a resistor to the inverting terminal. The non-inverting terminal is grounded, and a feedback resistor links the inverting terminal to the output. Using Kirchhoff's Current Law and an ideal op-amp model, the gain can be found. This circuit...

sum and difference opamps

Op-Amp Adders and Subtractors

Operational amplifiers can be wired to add or subtract signals. In these two op-amp setups, the summing amplifier combines several input signals into one output, while the difference amplifier compares two inputs and amplifies their difference. A summing amplifier is also called an adder. Input signals, such as audio signals, enter through input resistors. These resistors send currents through the feedback resistor, which produces an output voltage. Using Kirchhoff's current law and Ohm's Law,...

characteristics of practical op amps

Op Amp Noise Rejection and Buffering

Practical op amps are used to separate useful signals from unwanted noise. A difference amplifier should ideally amplify only the difference between two input signals. In real circuits, though, the output depends on both differential gain and common-mode gain. The common-mode rejection ratio, or CMRR, measures how well an op amp rejects common-mode signals. Common-mode signals are the same on both inputs. A higher CMRR helps an op amp ignore noise and amplify the wanted signal, such as music...

integrator and differentiator

Op-Amp Circuits in Cruise Control

Op-amp circuits are used in cruise control systems to help cars keep a constant speed. In these systems, operational amplifiers, or op-amps, can work as integrators and differentiators. Both circuits use resistors and capacitors, which makes them compact and cost-effective. An integrator circuit produces an output that is proportional to the integral of the input signal. It is made by replacing the feedback resistor in a standard inverting amplifier with a capacitor. The output and input...

instrumentation amplifier

ECG Signal Amplifier Design

An ECG signal amplifier helps an electrocardiography machine measure the heart’s electrical activity. ECG electrodes detect tiny voltage changes on the skin that come from depolarization of the heart muscle during each heartbeat. These signals are in the microvolt range, so they can be easily hidden by noise or interference. To solve this problem, ECG machines use an instrumentation amplifier. This amplifier boosts the ECG waveform while reducing common-mode noise, which is interference that...

key terms and concepts

Explore op-amp pinout, input polarity, and signal behavior. Learn how operational amplifiers use power supply pins and support summing, amplification, and more.

Operational Amplifier Pinout and Signal Use | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

Operational Amplifier Pinout and Signal Use

Description

Transcript

Tags