Name: wave patterns from light and slits
Uploaded: 2020-09-03T13:38:27.000Z
Duration: 2 min 18 s
Channel: JoVE

K12 Standards

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

9-12

Physics

Waves

Wave properties

Interference and Diffraction

Una propiedad única de las ondas es que cuando entran en contacto entre ellas, interactúan de tal manera que la onda resultante tiene una amplitud mejorada o disminuida. Este fenómeno se llama interferencia. Cuando las crestas de dos ondas están alineadas, están en fase"A medida que estas ondas interactúan, sus amplitudes se suman y se produce una onda con una mayor amplitud.Esta es una interferencia constructiva. Si las dos ondas no se alinean, de modo que sus crestas quedan en direcciones opuestas, están fuera de fase"En este caso, la onda resultante tiene una amplitud menor. Esta es una interferencia destructiva.Cuando la depresión una onda se superpone completamente con la cresta de la otra, las ondas se cancelan entre sí. La difracción es otro comportamiento característico de las ondas. Desde una perspectiva de vista superior de una onda, las crestas estén representadas por líneas verticales.Imagine que viaja hacia una barrera con una apertura estrecha. La abertura en la barrera es de tamaño similar a la longitud de onda. A medida que la onda pasa, las esquinas de la abertura se doblan y se extiende en diferentes direcciones.Pero, cómo se comportan las ondas cuando hay dos o más aperturas en la barrera? Esto se puede observar utilizando una fuente de luz. Cuando se emite luz, la onda pasa a través del par de rendijas poco espaciadas, y emergen dos ondas difractadas.Estas ondas interfieren entre sí para crear un patrón. Cuando las dos ondas viajan la misma distancia, interfieren constructivamente. Esto se observa por la aparición de una línea brillante.A una pequeña distancia del centro, en cualquier dirección, una onda recorre una distancia un poco más larga que la otra onda y se torna fuera de fase"La interferencia destructiva crea una región oscura. Dependiendo de las distancias recorridas por las ondas, se forma un patrón de interferencia que se alterna entre las líneas brillantes y oscuras. Este experimento de doble rendija demuestra la naturaleza ondulatoria de la luz.

interferencia y difracción

La interferencia es un fenómeno característico de las ondas. Cuando dos ondas electromagnéticas interactúan con sus picos y valles coincidiendo, se produce una onda resultante con amplitud aumentada. Esto se conoce como interferencia constructiva. En este caso, las dos ondas que interactúan están en fase una con otra.
 
 Alternativamente, si las dos ondas coinciden e interactúan de manera tal que el valle de una onda coincida con el pico de la otra (de forma desfasada), la onda resultante mostrará una amplitud mucho menor. Esto se conoce como interferencia destructiva.
 
 Las ondas también muestran un comportamiento característico llamado difracción. Cuando un haz de luz pasa a través de una rendija con un tamaño comparable a la longitud de onda del haz incidente － el haz se dobla (o difracta) alrededor de la rendija. Por el contrario, cuando una corriente de partículas pasa a través de una rendija, las partículas simplemente salen a través de la abertura.
 
 Además, cuando un haz de luz pasa a través de un par de hendiduras muy espaciadas separadas por una distancia comparable a la longitud de onda de la luz, se producen ondas circulares en cada hendidura por el proceso de difracción. Estas dos ondas interfieren entre sí de forma que se obtiene un patrón de interferencia con líneas oscuras y brillantes alternadas en una pantalla situada a una distancia corta detrás de las rendijas.
 
 La línea brillante se produce en el centro de la pantalla a medida que las dos ondas recorren una distancia igual para alcanzar este punto e interferir constructivamente. Cuando las dos ondas se desplazan a una pequeña distancia del centro en cualquier dirección, recorren distancias ligeramente diferentes. Están fuera de fase. Cuando la diferencia en las distancias recorridas es exactamente la mitad de la longitud de onda, ambas se encuentran produciendo interferencia destructiva. Las regiones oscuras corresponden a las regiones en las que los picos de la onda de una rendija coinciden con los valles de la onda de la otra rendija (interferencia destructiva), mientras que las regiones más brillantes corresponden a las regiones en las que los picos de las dos ondas (o sus dos valles) coinciden (interferencia constructiva). El patrón de difracción es una propiedad inherente de las ondas y presenta evidencia convincente de la naturaleza ondulante de la luz. 
 
 Este texto ha sido adaptado de <a href="https://openstax.org/books/chemistry-2e/pages/6-1-electromagnetic-energy">Openstax, Química 2e, Sección 6.1: Energía electromagnética.</a>

Interferencia y Difracción

La interferencia es un fenómeno característico de las ondas. Cuando dos ondas electromagnéticas interactúan con sus picos y valles coincidentes, un ...

Education

Educación

JoVE Core

Chemistry

Química

Electronic Structure of Atoms

Estructura electrónica de los átomos

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

wave patterns from light and slits

Light can form wave patterns through interference and diffraction. When two electromagnetic waves meet with their peaks and troughs lined up, they combine into a larger wave. This is constructive interference, and the waves are in phase. When a peak of one wave meets a trough of the other, the waves reduce each other. This is destructive interference, and the result has a much lower amplitude.

Diffraction is another wave behavior. When light passes through a slit that is about the same size as its wavelength, it bends around the opening. A stream of particles passing through a slit does not spread in the same way and simply passes through the aperture. This contrast helps show that light behaves like a wave in this setting.

Diffraction also appears when light passes through two closely spaced slits. Each slit produces circular waves by diffraction. The two waves then interfere and form a pattern of bright and dark lines on a screen behind the slits. The center of the screen is bright because the waves travel the same distance and combine constructively. Farther from the center, the waves travel slightly different distances and become out of phase. When that path difference is one half of a wavelength, destructive interference creates dark bands. The bright and dark regions in this pattern are evidence for the wave nature of light.

Wave Patterns from Light and Slits

the wave nature of light

Measuring Light with Wavelength and Frequency

Light can be described as an electromagnetic wave, and its behavior helps explain many patterns seen in science. For centuries, scientists have tried to understand light. Newton used lenses and prisms to show that white light is made of the colors of the rainbow mixed together. He explained light as tiny particles moving at high speed. Other scientists, including Christiaan Huygens, showed that reflection and refraction could also be explained by treating light as a wave. At the time, people...

the electromagnetic spectrum

Electromagnetic Waves: Uses Across the Spectrum

The electromagnetic spectrum includes all electromagnetic radiation arranged by frequency and wavelength. Visible light is only a small part of it, and each color of visible light has its own frequency and wavelength. Different parts of the spectrum also use different units. Radio waves are usually measured in MHz, while the visible range is often measured in nm or angstroms. The spectrum is organized from radio waves to gamma rays as frequency increases and wavelength decreases. Radio waves...

interference and diffraction

Light can form wave patterns through interference and diffraction. When two electromagnetic waves meet with their peaks and troughs lined up, they combine into a larger wave. This is constructive interference, and the waves are in phase. When a peak of one wave meets a trough of the other, the waves reduce each other. This is destructive interference, and the result has a much lower amplitude. Diffraction is another wave behavior. When light passes through a slit that is about the same size as...

photoelectric effect

Why Light Ejects Electrons from Metals

Light can eject electrons from a metal surface when it has the right frequency. This process is called the photoelectric effect. Each metal has its own threshold frequency, which is the minimum light frequency needed to free electrons. Light below the threshold frequency cannot cause emission, even if it is very bright. When the light frequency is above the threshold, electrons are ejected. In that case, the number of electrons released is directly proportional to the intensity, or brightness,...

the bohr model

Bohr’s Quantized Atomic Orbits

Bohr’s quantized atomic orbits explain why hydrogen atoms can stay stable. Early in the twentieth century, Ernest Rutherford and his colleagues described atoms as tiny dense nuclei with lighter electrons moving around them. This picture was called the planetary model because it compared the atom to a miniature solar system, with electrons orbiting the nucleus like planets around the sun. The simplest atom is hydrogen. It has one proton in the nucleus and one electron moving around it. In the...

emission spectra

Line Spectra from Heated Gases

Line spectra are produced when heated gases give off light at specific wavelengths. In contrast, hot solids, liquids, or condensed gases radiate excess energy as a continuous spectrum. That spectrum contains an unbroken range of wavelengths. A gas at low partial pressure can produce a line spectrum when it is excited by an electric current or heated. Fluorescent light bulbs and neon signs work in this way. Each element has its own characteristic set of lines, and molecules can also produce...

the de broglie wavelength

Electron Waves and Standing Orbits

Electron waves and standing orbits explain how tiny particles can behave like waves. Large objects in the macroscopic world, like a billiard ball on a table, follow classical physics. A ball keeps moving in a straight line unless it hits another ball or a force such as friction acts on it. It also has a well-defined position, velocity, and momentum, where momentum is mass times velocity. Waves behave differently from macroscopic particles. When waves interact, they can form interference...

the uncertainty principle

Electron Position and Momentum Limits

Heisenberg’s uncertainty principle sets a limit on how precisely we can know an electron’s position and momentum at the same time. Momentum is the motion of a particle, and the two measurements affect each other. If the momentum is known more accurately, the position becomes less certain, and the reverse is also true. Heisenberg described this limit with an equation that uses Planck’s constant. The equation shows the smallest possible uncertainty for position and momentum together. It explains...

the quantum-mechanical model of an atom

Electron Orbitals in Quantum Mechanics

Quantum mechanics explains how electrons behave in atoms using waves and probability. Erwin Schrödinger built on de Broglie’s idea that an electron in hydrogen could act like a circular standing wave instead of moving in fixed circular paths. He then derived the Schrödinger equation, which became a major step in modern atomic theory. When Schrödinger applied his equation to hydrogen-like atoms, it matched Bohr’s energy expression and the Rydberg formula for hydrogen spectra. He described...

quantum numbers

Electron Orbitals and Spin

Electron orbitals are described by quantum numbers that show where an electron is most likely to be found around the nucleus. These numbers come from the quantum mechanical model, which is based on solutions of the Schrödinger equation. They also help explain why electron energy comes in set values instead of changing smoothly. The principal quantum number, n, labels the energy level. It can be 1, 2, 3, and so on, and higher n values usually mean higher electron energy. This number also tells...

atomic orbitals

Electron Regions in Atomic Orbitals

Electron regions in atomic orbitals show where an electron is most likely to be found in an atom. These three-dimensional regions are often drawn as boundary surfaces around the densest part of the cloud. The shape of an orbital depends on the angular momentum quantum number, l. This value can range from 0 to n - 1, where n is the principal quantum number. For n = 1, only l = 0 is allowed. For n = 2, both l = 0 and l = 1 are allowed. Orbitals with the same value of l form a subshell. The l =...

the pauli exclusion principle

Electron Spin and Orbital Pairing

Electron spin and orbital pairing explain why only two electrons can fit in one atomic orbital. Electron configuration describes how electrons are arranged in an atom’s orbitals. It is written with three parts: the principal quantum number, n, the orbital type, or subshell, and a superscript that shows how many electrons are in that subshell. For example, 2p4 means four electrons in a p subshell with n = 2, and 3d8 means eight electrons in a d subshell with n = 3. The three quantum numbers...

the energies of atomic orbitals

Shielding and Orbital Penetration

Shielding and orbital penetration help explain why electrons in an atom have different energies. Electrons are attracted to the positive nucleus, but they also repel one another in atoms with more than one electron. The strength of these forces depends on the charge and the distance between the particles. Opposite charges attract, like charges repel, and the force gets weaker as the particles move farther apart. An electron that stays closer to the nucleus is held more tightly. That means...

the aufbau principle and hund's rule

Electron Filling Order in Atomic Orbitals

Electron filling order in atomic orbitals follows the aufbau principle and Hund's rule. To write an electron configuration, we build atoms in order of atomic number. Starting with hydrogen and moving across the periods of the periodic table, one proton is added to the nucleus and one electron is placed into the correct subshell. This process describes the ground-state electron configurations of the elements. The aufbau principle comes from the German word aufbau, which means "to build up." It...

electron configuration of multielectron atoms

electron-configuration-of-multielectron-atoms

Valence Electrons and Noble Gas Shorthand

Valence electrons and noble gas shorthand help show how electrons are arranged in multielectron atoms. Sodium, the alkali metal with atomic number 11, has one more electron than neon. That extra electron goes into the lowest-energy subshell available, the 3s orbital, so sodium has the configuration 1s2 2s2 2p6 3s1. Electrons in the outermost shell, where n is highest, are called valence electrons. Electrons in the inner shells are called core electrons. Because core electrons often match a...

key terms and concepts

See how light creates bright and dark bands through interference and diffraction, and how slit size and wave spacing reveal light’s wave nature.

Wave Patterns from Light and Slits | JoVE K12

chemistry

JoVE Core Química da vida a los conceptos de química general mediante lecciones de vídeo basadas en animaciones, concisas y fáciles de entender. Además, en los vídeos de científicos en acción, se muestran experimentos de investigación clásicos y originales realizados en laboratorios de todo el mundo.

Light phenomena

Tennessee Academic Standards

High School

waves-and-their-applications-in-technologies-for-information-transfer

Waves and Their Applications in Technologies for Information Transfer

PHYS.PS4.7

Florida Department of Education

Physical Science

SC.912.P.8

SC.912.P.8.3

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Chemical Reactions

HS-PS1-7.

Kinetic and Potential Energy of a Wave

All forms of waves carry energy; this is directly visualized in nature. For instance, the waves of earthquakes are so intense that they can shake huge ...

Energy and Power of a Wave

The total energy associated with a wavelength is the sum of the potential energy and the kinetic energy. The average rate of energy transfer associated ...

Interference and Superposition of Waves

When two waves of the same nature occur in the same region simultaneously, they result in interference. Interference of waves implies that the net effect ...

Reflection of Waves

When a wave travels from one medium to another, it gets reflected at the boundary of the second medium. A common example of this is when a person yells at ...

Propagation of Waves

When a wave propagates from one medium to another, part of it may get reflected in the first medium, and part of it may get transmitted to the second ...

Standing Waves

Sometimes waves do not seem to move; rather, they just vibrate in place. Unmoving waves can be seen on the surface of a glass of milk kept in a ...

/files/media/science-education/science-education-thumbs/12783.jpg

Modes of Standing Waves - I

A close look at earthquakes provides evidence for the conditions appropriate for resonance, standing waves, and constructive and destructive interference. ...

/files/media/science-education/science-education-thumbs/12784.jpg

Modes of Standing Waves: II

The starting point for expressing the modes of standing waves is understanding the boundary conditions that the waves must follow. The boundary conditions ...

/files/media/science-education/science-education-thumbs/14723.jpg

Sound Waves: Interference

Sound waves can be modeled either as longitudinal waves, wherein the molecules of the medium oscillate around an equilibrium position, or as pressure ...

Interference: Path Lengths

Consider two sources of sound, that may or may not be in phase, emitting waves at a single frequency, and consider the frequencies to be the same.
Two ...

/files/media/science-education/science-education-thumbs/14727.jpg

Sound Waves: Resonance

Resonance is produced depending on the boundary conditions imposed on a wave. Resonance can be produced in a string under tension with symmetrical ...

Interference is a characteristic phenomenon exhibited by waves. When two electromagnetic waves interact with their peaks and troughs coinciding, a ...

Wave properties
• Conservation of energy
• Reflection
• Refraction
• Interference
• Diffraction

Content elaboration: When a wave reaches a barrier or a new medium, a portion of its energy is reflected at the boundary and a portion of the energy passes into the new medium. Some of the energy that passes to the new medium may be absorbed by the medium and transformed to other forms of energy, usually thermal energy, and some continues as a wave in the new medium. Some of the energy may also be dissipated and no longer be part of the wave since it has been transformed into thermal energy or transferred out of the system due to the interaction of the system with surrounding objects. Usually all of these processes occur simultaneously, but the total amount of energy must remain constant. When waves bounce off barriers (reflection), the angle at which a wave approaches the barrier (angle of incidence) equals the angle at which the wave reflects off the barrier (angle of reflection). When a wave travels from a two-dimensional (e.g., surface water, seismic waves) or three-dimensional (e.g., sound, electromagnetic waves) medium into another medium in which the wave travels at a different speed, both the speed and the wavelength of the transferred wave change. Depending on the angle between the wave and the boundary, the direction of the wave can also change, resulting in refraction. The amount of bending of waves around barriers or small openings (diffraction) increases with decreasing wavelength. When the wavelength is smaller than the obstacle or opening, no noticeable diffraction occurs. Standing waves and interference patterns between two sources are included in this topic. As waves pass through a single or double slit, diffraction patterns are created with alternating lines of constructive and destructive interference. The diffraction patterns demonstrate predictable changes as the width of the slit(s), spacing between the slits and/or the wavelength of waves passing through the slits changes.

Photoelectric Effect

When light of a particular wavelength strikes a metal surface, electrons are emitted. This is called the photoelectric effect. The minimum frequency of ...

Electromagnetic Waves

James Clerk Maxwell formulated a single theory combining all the electric and magnetic effects scientists knew during that time, calling the phenomena his ...

The Electromagnetic Spectrum

Electromagnetic waves are categorized according to their wavelengths and frequencies, giving the electromagnetic spectrum. These waves are classified as ...

The Wave Nature of Light

The nature of light has been a subject of inquiry since antiquity. In the seventeenth century, Isaac Newton performed experiments with lenses and prisms ...

dual-nature-of-electromagnetic-em-radiation

Dual Nature of Electromagnetic (EM) Radiation

Electromagnetic (EM) radiation consists of electric and magnetic field components oscillating in planes perpendicular to each other and mutually ...

Light phenomena
• Ray diagrams (propagation of light)
• Law of reflection (equal angles)
• Snell's law
• Diffraction patterns
• Wave-particle duality of light
• Visible spectrum of color

Content elaboration: The path of light waves can be represented with ray diagrams to show reflection and refraction through converging lenses, diverging lenses and plane mirrors. Since light is a wave, the law of reflection applies. Snell's law, $n_{1}sin\theta_{1}=n_{2}sin~\theta_{2},$ quantifies refraction in which n is the index of refraction of the medium and is the angle the wave enters or leaves the medium as measured from the normal line. The index of refraction of a material can be calculated by the equation $n=c/v$, where n is the index of refraction of a material, v is the speed of light through the material, and c is the speed of light in a vacuum. Diffraction patterns of light are addressed, including patterns from diffraction gratings. There are two models of how radiant energy travels through space at the speed of light. One model is that the radiation travels in discrete packets of energy called photons that are continuously emitted from an object in all directions. The energy of these photons is directly proportional to the frequency of the electromagnetic radiation. This particle-like model is called the photon model of light energy transfer. A second model is that radiant energy travels like a wave that spreads out in all directions from a source. This wave-like model is called the electromagnetic wave model of light energy transfer. Strong scientific evidence supports both the particle-like model and wave-like model. Depending on the problem scientists are trying to solve, either the particle-like model or the wave-like model of radiant energy transfer is used. Students are not required to know the details of the evidence that supports either model at this level. Humans can only perceive a very narrow portion of the electromagnetic spectrum. Radiant energy from the sun or a light bulb filament is a mixture of all the colors of light (visible light spectrum). The different colors correspond to different radiant energies. When white light hits an object, the pigments in the object reflect one or more colors in all directions and absorb the other colors.

Wave Patterns from Light and Slits

Description

Transcript

Tags

More videos by Standards