Name: strong acids, strong bases, and ph
Uploaded: 2020-09-24T15:06:51.000Z
Duration: 3 min 22 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Chemistry

Matter and its Interactions

PS.Chm.6.3

Strong Acid and Base Solutions

Los ácidos fuertes se disocian completamente en agua. Por ejemplo, el ácido nítrico se disocia completamente en iones de hidronio e iones de nitrato. Como los iones de hidronio generados por la autoionización del agua son insignificantes, la concentración de iones de hidronio en el agua es igual a la concentración del ácido fuerte.El pH de estas soluciones se puede determinar usando la concentración inicial del ácido fuerte. Por ejemplo, en una solución de ácido clorhídrico al 0, 10 molar, el ácido clorhídrico se disociará completamente en los iones de hidronio y los iones de cloruro y, por lo tanto, la concentración de iones de hidronio de la solución también será de 0, 10 molar. Si consideramos el logaritmo negativo de esta concentración, el pH de la solución es igual a uno.Por el contrario, el pH de una solución se puede utilizar para determinar la concentración de iones de hidronio de una solución. Por ejemplo, para una solución de pH 3, 60, su concentración de iones de hidronio se puede determinar resolviendo la ecuación 3, 60 es igual al logaritmo negativo de la concentración de iones de hidronio. Para resolver la concentración, multiplique ambos lados por uno negativo y luego tome el antilogaritmo de ambos lados La concentración de iones de hidronio es igual a 2, 5 10⁻⁴ molar.Las bases fuertes que son hidróxidos de metales del grupo uno, como el hidróxido de sodio y el hidróxido de potasio, se disocian completamente en la solución. Por ejemplo, el hidróxido de sodio 0, 20 molar se disociará completamente en agua y producirá iones de sodio 0, 20 molar y en iones de hidróxido al 0, 20 molar. Sin embargo, los hidróxidos metálicos del grupo dos, como el hidróxido de bario y el hidróxido de calcio, producen dos moles de iones de hidróxido por cada mol de base.Por ejemplo, el hidróxido de calcio 0, 020 molar se disociará completamente en agua y producirá iones de calcio 0, 020 molar y en iones de hidróxido 0, 040 molar. Los óxidos de metales iónicos, como el óxido de sodio y el óxido de calcio, también son bases fuertes. Su ion de óxido reacciona con el agua y produce iones de hidróxido.La concentración de iones de hidróxido se puede utilizar para calcular el pOH y el pH de la solución. Por ejemplo, una solución molar de hidróxido de potasio 5x10⁻⁵ tiene la misma cantidad de iones de hidróxido que una base fuerte y, por lo tanto, tiene un pOH de 4, 30. Al igual que el pH, también se puede usar un pOH de la solución para determinar la concentración de iones de hidróxido resolviendo la ecuación:pOH es igual al logaritmo negativo de la concentración de iones de hidróxido Dado que el pH más pOH es igual a 14 y el pOH es 4, 3, el pH de la solución es 9, 7.

soluciones de Ácidos y bases fuertes

Un ácido fuerte es un compuesto que se disocia completamente en una solución acuosa y produce una concentración de iones hidronio igual a la concentración inicial del ácido. Por ejemplo, el ácido hidrobrómico 0,20 M se disociará completamente en el agua y produce 0,20 M de iones hidronio y 0,20 M de iones bromuro.
 <img alt="Eq1" src="/files/ftp_upload/11399/11399_Equation_1.png" style="height: 50px;" />
 Por otro lado, una base fuerte es un compuesto que se disocia completamente en una solución acuosa y produce iones hidróxido. Por ejemplo, 0,015 M KOH, un hidróxido metálico del grupo 1, se disociará completamente y producirá 0,015 M de OH− y 0,015 M de K+.
 <img alt="Eq2" src="/files/ftp_upload/11399/11399_Equation_2.png" style="height: 50px;" />
 Los hidróxidos metálicos del grupo 2, como el hidróxido de bario [Ba(OH)2] y el hidróxido de estroncio [Sr(OH)2], también son bases fuertes y poseen dos iones hidróxido. Esto hace que produzcan una solución más básica en comparación con el NaOH o el KOH en la misma concentración. Por ejemplo, 0,015 M Ba(OH)<sub2  produce 0,015 M de Ba +  y 0,030 M de hidróxido.
 <img alt="Eq3" src="/files/ftp_upload/11399/11399_Equation_3.png" style="height: 50px;" />
 A medida que los ácidos y bases fuertes se disocian completamente, se pueden utilizar relaciones molares para determinar sus concentraciones de hidronio e hidróxido, que a su vez pueden utilizarse para calcular el pH o el pOH de una solución. Por ejemplo, una solución de HCl 0,030 M producirá iones hidronio 0,03 M. Por lo tanto, el pH de esta solución será
 <img alt="Eq4" src="/files/ftp_upload/11399/11399_Equation_4.png" style="height: 135px;" />
 El pOH de la misma solución puede determinarse utilizando la fórmula
 <img alt="Eq5" src="/files/ftp_upload/11399/11399_Equation_5.png" style="height: 50px;" />
 Como el pH de la solución es 1,52, su pOH se puede calcular como
 <img alt="Eq6" src="/files/ftp_upload/11399/11399_Equation_6.png" style="height: 50px;" />
 De igual manera, la concentración de iones hidróxido producidos por bases fuertes puede utilizarse para determinar el pOH de una solución utilizando la ecuación
 <img alt="Eq7" src="/files/ftp_upload/11399/11399_Equation_7.png" style="height: 50px;" />
 La ecuación anterior también puede utilizarse para determinar la concentración de iones hidróxido cuando se conoce el pOH. Por ejemplo, si el pOH de una solución es 3,00,
 <img alt="Eq8" src="/files/ftp_upload/11399/11399_Equation_8.png" style="height: 50px;" />
 La multiplicación de ambos lados por −1 da
 <img alt="Eq9" src="/files/ftp_upload/11399/11399_Equation_9.png" style="height: 50px;" />
 Ahora, tome el antilogaritmo de ambos lados
 <img alt="Eq10" src="/files/ftp_upload/11399/11399_Equation_10.png" style="height: 90px;" />
 Por lo tanto, la concentración de iones hidronio de la solución con pOH 3 es de 1,0 × 10−3 M. Se puede utilizar un método similar para determinar la concentración de iones de hidronio de una solución si se conoce su pH.

Soluciones de Ácidos y Bases Fuertes

Un ácido fuerte es un compuesto que se disocia completamente en una solución acuosa y produce una concentración de iones hidronio igual a la ...

Education

Educación

JoVE Core

Química

Acids and Bases

Ácidos y bases

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

strong acids, strong bases, and ph

Strong acids and strong bases change the pH of a solution by dissociating completely in water. A strong acid produces hydronium ions, which are H3O+ ions, and a strong base produces hydroxide ions, OH-. Because the dissociation is complete, the ion concentration can be found from the starting concentration and the molar ratio.

For example, 0.20 M hydrobromic acid dissociates fully in water. It produces 0.20 M hydronium ions and 0.20 M bromide ions. A 0.015 M KOH solution also dissociates completely. It produces 0.015 M OH- and 0.015 M K+.

Some group 2 metal hydroxides are also strong bases. Barium hydroxide, Ba(OH)2, and strontium hydroxide, Sr(OH)2, each contain two hydroxide ions. That means they create a more basic solution than NaOH or KOH at the same concentration. For example, 0.015 M Ba(OH)2 produces 0.015 M Ba+ and 0.030 M hydroxide.

The ion concentrations from strong acids and strong bases can be used to calculate pH and pOH. A 0.030 M HCl solution produces 0.03 M hydronium ions, so its pH can be found from that concentration. The same pH value can then be used to determine pOH. If the pH is 1.52, the pOH can be calculated from the relationship between them.

The same idea works for strong bases. The hydroxide ion concentration can be used to find pOH with the equation for pOH, and the equation can also be used in reverse when pOH is known. For example, if the pOH of a solution is 3.00, multiplying by -1 and taking the antilog gives a hydronium ion concentration of 1.0 × 10^-3 M. The same method can be used to find hydronium ion concentration when pH is known.

Strong Acids, Strong Bases, and pH

bronsted-lowry acids and bases

Proton Transfer in Acids and Bases

Acids and bases can be understood through proton transfer. Early scientists described acids by their sour taste, their effect on dyes, and their reaction with limestone, which releases carbon dioxide. Robert Boyle also noted that acid solutions can lose these properties after contact with alkali, or base, solutions. The modern view developed step by step. Humphry Davy showed that hydrogen is the essential part of acids. Joseph Louis Gay-Lussac then described acids as substances that neutralize...

water: a bronsted-lowry acid and base

Water as an Amphiprotic Substance

Water can act as both a Brønsted-Lowry acid and a Brønsted-Lowry base. When hydrogen fluoride dissolves in water, it donates protons to water. This is acid ionization. The products are hydronium ions and fluoride ions. Water can also accept protons from another substance. When pyridine dissolves in water, it accepts a proton from water molecules. This is base ionization. The products are hydroxide ions and pyridinium ions. These reactions show that water can play either role. A substance that...

ph scale

pH and pOH in Water

pH and pOH show how hydronium and hydroxide ions behave in water and other aqueous solutions. These ion concentrations are linked by the ion product of water, K w , so when one goes up, the other goes down. Because ion concentrations can differ by huge amounts, a logarithmic scale is used to describe them. pH is defined from the hydronium ion concentration, [H3O+], and pOH is the matching p-function for hydroxide ion concentration. These two values are also connected through the K w...

relative strengths of conjugate acid-base pairs

relative-strengths-of-conjugate-acid-base-pairs

How Ka and Kb Show Acid-Base Strength

Brønsted-Lowry acid-base chemistry is based on proton transfer. That idea helps show how the strength of an acid is linked to the strength of its conjugate base, and vice versa. Acid and base strength is measured with ionization constants, Ka and Kb, which tell how far an ionization reaction goes. For the conjugate pair HA and A−, the acid ionizes in water and the base reaction can be written for the partner species. When the two reactions are added, they give the autoionization of water. The...

strong acid and base solutions

Strong acids and strong bases change the pH of a solution by dissociating completely in water. A strong acid produces hydronium ions, which are H3O+ ions, and a strong base produces hydroxide ions, OH-. Because the dissociation is complete, the ion concentration can be found from the starting concentration and the molar ratio. For example, 0.20 M hydrobromic acid dissociates fully in water. It produces 0.20 M hydronium ions and 0.20 M bromide ions. A 0.015 M KOH solution also dissociates...

weak acid solutions

Weak Acid Equilibrium in Water

Weak acid equilibrium in water explains why many acids only partially react when dissolved. Most weak acid molecules stay in their original form, and only a small amount of hydronium ions forms. Weak acids are common in nature. They help create the tangy taste of citrus fruits, the stinging sensation from insect bites, and the smells linked to body odor. Acetic acid is a familiar weak acid. It is the main ingredient in vinegar. Its equation uses a double arrow to show that the reaction with...

weak base solutions

Weak Base pH and Kb Calculations

Weak base pH and Kb calculations show how partially reacting bases change water chemistry. Weak bases produce hydroxide ions when they dissolve by reacting with water molecules. Because the reaction only happens partly, these compounds are classified as weak bases. Weak bases are common in nature and in technology. Ammonia is one major example. Global production of ammonia is typically well over 100 metric tons each year. It is used as an agricultural fertilizer, a starting material for...

mixtures of acids

pH of Acid Mixtures

The pH of acid mixtures depends on the acids present, their dissociation constants, and their starting concentrations. When a solution contains two different acids, the pH can be found by choosing the method that fits their relative strengths. This makes acid mixtures a useful case for applying acid-base rules in chemistry. In a mixture of a strong acid and a weak acid, the strong acid dissociates completely and supplies almost all of the hydronium ions in the solution. The weak acid...

ions as acids and bases

Salt Hydrolysis and pH of Solutions

Salt hydrolysis explains why some salt solutions are acidic, basic, or neutral. Salts are ionic compounds made of cations and anions. In water, either ion may react with water through an acid or base ionization reaction. The pH of the solution depends on the relative acid-base strength of the ions in the salt. Ammonium chloride is a good example of an acidic salt. When it dissolves, it separates into ammonium ions and chloride ions. The ammonium ion is the conjugate acid of ammonia, so it can...

determining the ph of salt solutions

Salt Hydrolysis and pH in Solutions

Salt hydrolysis and pH in solutions depend on the ions released when a salt dissolves. Some ions react with water, while others do not. The balance between the cation and anion helps show whether the solution becomes acidic, basic, or neutral. Salts with pH-neutral anions and cations that produce hydronium ions give acidic solutions with pH below 7. Ammonium nitrate is one example. In NH4NO3, NO3− does not react with water, but NH4+ forms hydronium ions, so the solution is acidic. Other salts...

acid/base strengths and dissociation constants

acidbase-strengths-and-dissociation-constants

Acid and Base Strength in Water

Acid and base strength in water depends on how much a substance ionizes after it dissolves. If ionization is nearly complete, the substance is called strong. If only a small amount ionizes, it is called weak. Weak acids and weak bases are much more common than strong ones. The most common strong acids are HClO4, HCl, HBr, HI, HNO3, and H2SO4. The most common strong bases are LiOH, NaOH, KOH, Ca(OH)2, Sr(OH)2, and Ba(OH)2. These strong acids and bases ionize essentially completely in water. <br...

polyprotic acids

Stepwise Ionization of Polyprotic Acids

Polyprotic acids lose hydrogen ions in steps. The number of ionizable protons in a molecule determines whether an acid is monoprotic, diprotic, or triprotic. This video also shows that polyprotic bases can accept more than one proton. Monoprotic acids have one ionizable hydrogen atom per molecule. Examples include HCl, HNO3, and HCN. Their reactions with water form hydronium ions and the matching anion. Acetic acid, CH3CO2H, is also monoprotic because only the hydrogen in the carboxyl group...

acid strength and molecular structure

How Bonding Affects Acid Strength

Acid strength depends on bonding, electronegativity, and oxidation number. These factors help explain why some hydrogen compounds act as strong acids, while others behave as weak acids or bases. For binary acids, which are hydrogen compounds with one other nonmetal, acidity increases as the H-A bond gets weaker down a group. That is why the order for group 17 is HF &lt; HCl &lt; HBr &lt; HI, and for group 16 it is H2O &lt; H2S &lt; H2Se &lt; H2Te. Across a period, acid strength increases as...

lewis acids and bases

Electron-Pair Reactions in Acid-Base Chemistry

Electron-pair reactions explain Lewis acid-base chemistry. In 1923, G. N. Lewis described acids and bases by how they accept or donate a pair of electrons. When that electron pair forms a coordinate covalent bond, one atom supplies both bonding electrons. This bond is also called a dative bond. A simple example is the reaction of water with a hydrogen ion to make a hydronium ion. Ammonia can also combine with a hydrogen ion to form an ammonium ion. In both cases, the reaction creates a Lewis...

key terms and concepts

Learn how strong acids and strong bases dissociate completely in water and how their ion concentrations are used to calculate pH and pOH.

Strong Acids, Strong Bases, and pH | JoVE K12

chemistry

JoVE Core Química da vida a los conceptos de química general mediante lecciones de vídeo basadas en animaciones, concisas y fáciles de entender. Además, en los vídeos de científicos en acción, se muestran experimentos de investigación clásicos y originales realizados en laboratorios de todo el mundo.

Physical Science

PS.PSc.2.5

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Interactions Of Matter

Chemical reactions

Minnesota Academic Standards in Science

1.2.1 9L.4.2.2.1

Texas Essential Knowledge and Skills

High School

CHEM.12

CHEM.12.C

Alabama Course of Study Science

Matter and Its Interactions

9-12.C.1.6.a

9-12.PS.3.6.c

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Chemical Reactions

HS-PS1-11.

Scientific Laws and Theories

Scientific Laws

In science, a law is defined as a concise, verbal or mathematical, statement that summarizes a vast number of experimental observations. ...

The Scientific Method

Chemistry is an empirical science. Scientists often pose questions to understand the chemistry in everyday life and seek answers to these questions. To ...

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

Elements: Chemical Symbols and Isotopes

A chemical symbol is an abbreviation used to indicate an element or an atom of an element. For example, the symbol for mercury is Hg. The same symbol is ...

Use models to explain how the scientific understanding of atomic structure has evolved.

PS.Chm.1.1

Radioactivity and Nuclear Equations

Nuclear chemistry is the study of reactions that involve changes in nuclear structure. The nucleus of an atom is composed of protons and, except for ...

Types of Radioactivity

The most common types of radioactivity are &#945; decay, &#946; decay, &#947; decay, neutron emission, and electron capture.
Alpha (&#945;) decay is the ...

Nuclear Stability

Protons and neutrons, collectively called nucleons, are packed together tightly in a nucleus. With a radius of about 10&#8722;15 meters, a nucleus is ...

Nuclear Binding Energy

The difference between the calculated and experimentally measured masses is known as the mass defect of the atom. In the case of helium-4, the mass defect ...

Radioactive Decay and Radiometric Dating

Radioactivity is a spontaneous disintegration of an unstable nuclide and is a random process, as all the nuclei in the sample do not decay simultaneously. ...

Nuclear Fission

Many heavier elements with smaller binding energies per nucleon can decompose into more stable elements that have intermediate mass numbers and larger ...

Nuclear Power

Controlled nuclear fission reactions are used to generate electricity. Any nuclear reactor that produces power via the fission of uranium or plutonium by ...

Nuclear Fusion

The process of converting very light nuclei into heavier nuclei is also accompanied by the conversion of mass into large amounts of energy, a process ...

Nuclear Transmutation

Nuclear transmutation is the conversion of one nuclide into another. It can occur by the radioactive decay of a nucleus, or the reaction of a nucleus with ...

Use models to compare nuclear reactions including alpha decay, beta decay and gamma decay; nuclear fusion and nuclear fission.

PS.Chm.1.2

Atomic Orbitals

An atomic orbital represents the three-dimensional regions in an atom where an electron has the highest probability to reside. The radial distribution ...

The Pauli Exclusion Principle

The arrangement of electrons in the orbitals of an atom is called its electron configuration. We describe an electron configuration with a symbol that ...

The Energies of Atomic Orbitals

In an atom, the negatively charged electrons are attracted to the positively charged nucleus. In a multielectron atom, electron-electron repulsions are ...

The Aufbau Principle and Hund's Rule

To determine the electron configuration for any particular atom, we can build the structures in the order of atomic numbers. Beginning with hydrogen, and ...

electron-configuration-of-multielectron-atoms

Electron Configuration of Multielectron Atoms

The alkali metal sodium (atomic number 11) has one more electron than the neon atom. This electron must go into the lowest-energy subshell available, the ...

Use models to explain how electrons are distributed in atoms.

PS.Chm.1.3

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

Atomic Mass

Atoms &mdash; and the protons, neutrons, and electrons that compose them &mdash; are extremely small. For example, a carbon atom weighs less than 2 ...

Molar Mass

The identity of a substance is defined not only by the types of atoms or ions it contains but by the quantity of each type of atom or ion. For example, ...

Use the Periodic Table as a model to predict the relative properties of elements based on the pattern of valence electrons in the outermost energy levels of atoms.

PS.Chm.2.1

atomic-radii-and-effective-nuclear-charge

Atomic Radii and Effective Nuclear Charge

The elements in groups of the periodic table exhibit similar chemical behavior. This similarity occurs because the members of a group have the same number ...

Ionic Radii

Ionic radius is the measure used to describe the size of an ion. A cation always has fewer electrons and the same number of protons as the parent atom; it ...

Ionization Energy

The amount of energy required to remove the most loosely bound electron from a gaseous atom in its ground state is called its first ionization energy ...

Electron Affinity

The electron affinity (EA) is the energy change for adding an electron to a gaseous atom to form an anion (negative ion).



This process can be either ...

Construct an explanation to infer the atomic size, reactivity, electronegativity, and ionization energy of an element based on its position in the Periodic Table.

PS.Chm.2.2

Types of Chemical Bonds

Chemical bonding theories were pioneered by American chemist Gilbert&#xA0;N. Lewis. He developed a model called the Lewis model to explain the type and ...

Lewis Symbols and the Octet Rule

Chemical bonds are complex interactions between two or more atoms or ions, which reduce the potential energy of the molecule. Gilbert N. Lewis developed a ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&#xA0;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

trends-in-lattice-energy-ion-size-and-charge

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&#xA0;

Electronegativity values of ...

bond-polarity-dipole-moment-and-percent-ionic-character

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Resonance

The Lewis structure of a nitrite anion (NO2&minus;) may actually be drawn in two different ways, distinguished by the locations of the N-O and N=O ...

Formal Charges

In some cases, there are seemingly more than one valid Lewis structures for molecules and polyatomic ions. The concept of formal charges can be used to ...

Exceptions to the Octet Rule

Many covalent molecules have central atoms that do not have eight electrons in their Lewis structures. These molecules fall into three categories:


	...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

Analyze and interpret data to explain the mechanisms and properties of the two main types of intramolecular (ionic and covalent) bonds.

PS.Chm.3.1

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

Intermolecular vs Intramolecular Forces

Intermolecular forces (IMF) are electrostatic attractions arising from charge-charge interactions between molecules. The strength of the intermolecular ...

Intermolecular Forces

Atoms and molecules interact through bonds (or forces): intramolecular and intermolecular. The forces are electrostatic as they arise from interactions ...

Construct an explanation to summarize the influences intermolecular forces have on the properties of chemical compounds.

PS.Chm.3.2

Analyze the structure of atoms and isotopes.

Strong Acids, Strong Bases, and pH

Description

Transcript

Tags

More videos by Standards