Name: isotope peaks in mass spectra
Uploaded: 2025-12-12T12:30:35.000Z
Duration: 1 min 13 s
Channel: JoVE

La mayoría de los átomos de las moléculas pueden presentarse como isótopos diferentes, lo que da lugar a diferentes masas atómicas. Por lo tanto, el espectro de masas contiene señales de masa correspondientes a estas diferencias.
Las posiciones de las señales de masa de varios isótopos están determinadas por sus diferencias de masa. Las intensidades relativas de las señales de masa dependen generalmente de la abundancia relativa de los isótopos.
Por ejemplo, las moléculas que contienen carbono muestran un pico adicional a partir de 13C, una unidad más alto que el pico del ion molecular. Este pico adicional se conoce como pico M+1.
Un aumento en el número de átomos de carbono da más posibilidades de incluir 13C, y por lo tanto aumenta la intensidad relativa del pico M+1.
Los espectros de masas de cloruros y bromuros exhiben una señal M+2, ya que los isótopos primarios de cloro y bromo difieren en dos unidades de masa.
Las intensidades relativas de los picos M+2 ayudan a identificar si se trata de cloro o bromo en la molécula de analito.

espectrometría de masas: efecto isotópico

Mass Spectrometry: Isotope Effect

La mayoría de los elementos existen en la naturaleza como una mezcla de isótopos. Los isótopos difieren en peso debido a su respectivo número de neutrones. El peso molecular de una molécula es diferente dependiendo del isótopo específico de sus elementos involucrados. Como resultado, el espectro de masas de la molécula exhibe picos del mismo fragmento en múltiples posiciones. Las posiciones de estas señales de masa dependen de la diferencia entre la masa molecular. Además, la intensidad de estas señales depende de la relación relativa de la abundancia isotópica en la naturaleza.
Por ejemplo, el carbono tiene dos isótopos naturales estables de masa molecular 12 y 13 u que coexisten en una composición relativa de 1:0,011. Las señales de masa para un ion molecular que contiene carbono o un fragmento cargado se posicionan en su masa molecular (M) y una unidad más alta que su masa molecular (M+1). La relación relativa entre el pico M + 1 y el pico M depende del número de átomos de carbono en la molécula en particular. Se comparan los picos M y M+1 de metano, decano e icosano. A medida que aumenta el número de átomos de carbono, la intensidad relativa del pico M+1 también aumenta debido a la creciente probabilidad de que la molécula contenga un átomo de 13C.
Los picos de isótopos en el espectro de masas y su intensidad relativa se utilizan para identificar la presencia de elementos específicos en el analito desconocido. Por ejemplo, un pico M+2 en la molécula indica la presencia de cloro o bromo en la molécula, ya que los isótopos de los haluros difieren en dos u. Además, a partir de la intensidad relativa del pico M+2, es posible diferenciar entre el cloro y el bromo en el analito. La abundancia de isótopos de cloro es del 75% de los 35Cl y del 25% de los 37Cl, mientras que, para los isótopos de bromo, es aproximadamente el 50% de los 79Br y 81Br. La diferencia en la relación relativa entre los picos M y M+2 en los espectros de masas de clorobenceno y bromobenceno es notable.

Espectrometría de masas: efecto isotópico

La mayoría de los elementos existen en la naturaleza como una mezcla de isótopos. Los isótopos difieren en peso debido a su respectivo número de neutrones. El peso molecular de ...

Education

Educación

JoVE Core

Analytical Chemistry

Química Analítica

Unit 1

Unidad 1

Principles of Mass Spectrometry

Principios de la espectrometría de masas

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

isotope peaks in mass spectra

Isotope peaks in mass spectra show how natural isotope mixtures change the signal of a molecule. Most elements occur as a mix of isotopes, which are atoms of the same element with different numbers of neutrons. Because isotopes have different masses, the same fragment can appear at more than one position in a spectrum.

The mass of a molecule depends on which isotopes are present in its atoms. The size of each isotope peak also depends on how common those isotopes are in nature. Carbon is a useful example. It has two stable isotopes, 12 and 13 u, in a relative composition of 1:0.011.

For carbon-containing ions, the main signal appears at M, which is the molecular mass. A second signal appears at M+1. The size of the M+1 peak compared with the M peak depends on how many carbon atoms the molecule has. Methane, decane, and icosane show this trend clearly. As the number of carbon atoms increases, the M+1 peak becomes more intense because there is a greater chance of including a 13C atom.

Isotope peaks can also help identify specific elements in an unknown analyte. An M+2 peak often points to chlorine or bromine, because their isotopes differ by two u. The relative intensity of that M+2 peak can help distinguish between them. Chlorine is about 75% 35Cl and 25% 37Cl, while bromine is about 50% 79Br and 81Br. This difference creates distinct M to M+2 patterns, such as those seen in chlorobenzene and bromobenzene.

Isotope Peaks in Mass Spectra

mass spectrometry: overview

Mass Spectrometry and Molecular Identity

Mass spectrometry helps identify a compound by measuring its molecular mass and molecular formula. It does this by turning the analyte molecule into ions and then comparing ion abundance with mass-to-charge ratio. One common ionization method is electron ionization, or EI. In EI, high-energy electron beams strike analyte molecules in the gas phase. The beam removes an electron and leaves a molecular ion behind. A molecular ion is a radical cation, so it has a positive charge and an unpaired...

mass spectrometry: isotope effect

Isotope peaks in mass spectra show how natural isotope mixtures change the signal of a molecule. Most elements occur as a mix of isotopes, which are atoms of the same element with different numbers of neutrons. Because isotopes have different masses, the same fragment can appear at more than one position in a spectrum. The mass of a molecule depends on which isotopes are present in its atoms. The size of each isotope peak also depends on how common those isotopes are in nature. Carbon is a...

mass spectrometry: molecular fragmentation overview

mass-spectrometry-molecular-fragmentation-overview

Mass Spectrometry Fragmentation Patterns

Mass spectrometry fragmentation patterns show how a molecular ion breaks apart after ionization. When a molecule loses an electron inside the mass spectrometer, its structure becomes unstable. The ion then fragments at bonds that often produce the most stable pieces. One common pattern is cleavage of a single bond in the molecular ion. This break forms a radical and a cation. The bond can split in more than one way, but the favored path is the one that gives the more stable carbocation rather...

mass spectrometers

How Mass Spectrometers Sort Ions

A mass spectrometer sorts charged ions by their mass-to-charge ratio and records their relative abundance. It turns vaporized analyte molecules into ions, separates them, and then measures the signal from each type of ion. The process begins in the ionization chamber. The analyte is in the gas phase inside a vacuum, and it is struck by high-energy electrons. The electrons have about 70 eV of energy, which is enough to remove an electron from the analyte and form a molecular ion. After...

mass spectrum

Reading Peaks in a Mass Spectrum

A mass spectrum shows the charged fragments in an analyte as peaks plotted by mass-to-charge ratio, or m/z. The x-axis gives the mass of each charged fragment divided by the number of charges it carries. The y-axis shows the relative abundance of each charged species based on the signal intensity recorded at the detector. The tallest peak is called the base peak. It is assigned an abundance of 100%, and the other peaks are scaled against it. The peak from the molecular ion is called the parent...

mass spectrum: interpretation

Decoding Molecular Ions in Mass Spectra

Mass spectra help scientists identify an unknown compound by finding the molecular ion peak. The molecular ion peak shows the mass of the intact molecule, but it is often weak or missing because high-energy electron beams cause strong fragmentation. When that happens, a soft-energy electron beam can be used to scan the spectrum and improve the molecular ion signal. Other ionization methods can also give a stronger molecular ion peak. Chemical ionization, field ionization, and desorption...

mass analyzers: overview

Mass Analyzers and Ion Separation

Mass analyzers separate ions by their mass-to-charge ratio, or m/z, in a mass spectrometer. After a sample is vaporized in the ionization chamber, it is hit with a high-energy electron beam. This creates a radical cation and also produces neutral molecules, radicals, and cations. Negatively charged accelerator plates then push the cations into the mass analyzer, where they are sent on to the detector. Several mass analyzer designs are commonly used. These include magnetic sector,...

mass analyzers: common types

Quadrupole, TOF, and Ion Trap Analyzers

Quadrupole, time-of-flight, and ion trap mass analyzers each separate ions in a different way. They are common tools in mass spectrometry and help sort ions by their mass-to-charge ratio, or m/z. A quadrupole mass analyzer uses four cylindrical metal rods arranged in a diamond shape. The rods carry a direct current, or DC, voltage and a radio-frequency AC voltage. Ion motion depends on the field strength, so only ions with a certain m/z resonate and reach the detector at that setting. This...

high-resolution mass spectrometry (hrms)

Mass Accuracy in HRMS Analysis

High-resolution mass spectrometry separates ions by very small differences in mass. This matters because atomic masses are not always exact whole numbers, even though they are often rounded for simple calculations. Atomic mass is usually estimated by adding the masses of protons and neutrons. In reality, the proton and neutron do not have exactly the same mass. That creates small differences when atomic masses are compared to the simplest hydrogen atom. Helium, for example, is made of 2...

mass spectrometry: complex analysis

Hyphenated Mass Spectrometry Methods

Mass spectrometry can be paired with separation methods to study complex mixtures. This combination is called a hyphenated method. It helps when a pure mass spectrum is too hard to read because a mixture causes too much fragmentation and too many overlapping signals. GC-MS is one common hyphenated method. GC stands for gas chromatography, which separates volatile, thermally stable compounds in narrow capillary columns before they enter the mass spectrometer. This approach is widely used in...

tandem mass spectrometry

MS/MS Scan Modes and Fragment Ions

Tandem mass spectrometry uses two or more mass analyzers in series to improve selectivity and lower chemical noise during analyte detection. A set of analyzers separated by an interaction cell lets the instrument break ions apart and study the fragment ions that form. Fragmentation happens in the interaction cell and can be caused in several ways. Collision-induced dissociation, or CID, uses inert gases such as nitrogen, argon, or helium. Other methods include surface-induced dissociation...

gas chromatography&ndash;mass spectrometry (gc&ndash;ms)

How GC-MS Separates and Identifies Compounds

Gas chromatography-mass spectrometry (GC-MS) separates compounds in a mixture and then identifies them. A gas chromatograph first splits the mixture into its parts. A mass spectrometer then analyzes each part on its own to determine molecular masses and molecular structures. The gas chromatograph uses a long, narrow capillary column. The inner wall of the column has a polysiloxane coating. This coating serves as the stationary phase. It has a high boiling point, low viscosity, and low polarity.

inductively coupled plasma&#8211;mass spectrometry (icp&#8211;ms): overview

inductively-coupled-plasmamass-spectrometry-icpms-overview

ICP-MS Sample Ionization and Detection

ICP-MS uses an inductively coupled plasma torch to turn samples into ions for mass analysis. Solid samples are first dissolved and volatilized before they enter the hot argon plasma. Solution samples are nebulized, which means they are converted into a fine spray, and then passed through the same plasma. Inside the plasma, the analytes break apart. Their atoms become positively charged ions, along with some molecular species. These positive ions are sent to the mass spectrometer, where they...

inductively coupled plasma-mass spectrometry (icp-ms): interferences

inductively-coupled-plasma-mass-spectrometry-icp-ms-interferences

ICP-MS Signal Interference Sources and Fixes

Inductively coupled plasma-mass spectrometry (ICP-MS) is a sensitive method for elemental analysis, but its spectra can be affected by interferences. These interferences can make the mass signal less accurate, even when the instrument is working well. Spectroscopic interferences happen when ions in the plasma have the same mass-to-charge ratio, or m/z, as the analyte ion. This group includes isobaric interferences, polyatomic ion interferences, and refractory oxide ion interferences. Isobaric...

key terms and concepts

Learn how isotope peaks appear in mass spectra, why carbon gives M and M+1 signals, and how M+2 peaks can reveal chlorine or bromine.

Isotope Peaks in Mass Spectra | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Isotope Peaks in Mass Spectra

Description

Transcript

Tags