Name: how mass and speed affect kinetic energy
Uploaded: 2025-05-22T09:05:47.000Z
Duration: 1 min 14 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

NC K-12 Science Standard Course of Study

9-12

Physical Science

Energy

PS.PSc.7.2

Types of Kinetic Energy

La energía cinética en sí misma también existe en diferentes formas, a saber, energías mecánicas, eléctricas, térmicas y radiantes.
Mientras que la energía mecánica se debe al movimiento mecánico de un objeto como un automóvil en movimiento, la energía eléctrica está constituida por el flujo de cargas eléctricas, como se ve en los rayos. Cuando la energía cinética está en forma de ondas electromagnéticas, como la energía de la luz solar, es energía radiante.
La energía térmica es la energía cinética asociada con el movimiento de los átomos y moléculas en un objeto. A medida que los átomos y moléculas dentro de un objeto se mueven o vibran rápidamente y chocan entre sí con mayor frecuencia, la temperatura del objeto aumenta. El calor de una llama ardiente es un ejemplo de energía térmica.
Lo contrario sucede cuando las vibraciones o movimientos de estos átomos y moléculas se ralentizan. Entonces se dice que el objeto está frío y tiene baja energía térmica, como cuando el agua se congela.

tipos de energía cinética

La magnitud de energía cinética de un objeto depende de su masa y velocidad. Considera dos bolas de masas diferentes rodando por una rampa inclinada a la misma velocidad. La bola más pesada tendrá más energía cinética. De manera similar, cuando dos bolas de la misma masa ruedan por una rampa inclinada a diferentes velocidades, la bola que se mueve más rápido tiene más energía cinética. Existen varios tipos diferentes de energía cinética, incluyendo energía mecánica, eléctrica, radiante y térmica. La energía mecánica está asociada con el movimiento de un objeto. Cuanto más rápido se mueve un objeto, más energía mecánica tiene. Por ejemplo, una bala disparada de un arma o el agua fluyendo por una presa son ejemplos de energía mecánica. La energía eléctrica está atribuida al flujo de cargas eléctricas, como se observa en el caso de los rayos durante las tormentas o en los circuitos y dispositivos eléctricos. La energía radiante es una forma de energía cinética que se desplaza como ondas electromagnéticas, y se puede experimentar en forma de luz y calor. La luz solar es un ejemplo de energía radiante. La energía térmica está asociada al movimiento aleatorio de átomos y moléculas. La temperatura es una medida de la energía cinética promedio de las partículas en un objeto. Cuando los átomos y moléculas de un objeto se mueven o vibran rápidamente, tienen una energía cinética promedio más alta, y el objeto tiene una temperatura más alta. Cuando los átomos y moléculas se mueven lentamente, tienen una energía cinética promedio más baja, y el objeto tiene una temperatura más baja. Por lo tanto, la energía térmica se puede observar a través de cambios de temperatura en un objeto. Suponiendo que no ocurren reacciones químicas ni cambios de fase (como derretimiento o vaporización), aumentar la magnitud de energía térmica en una muestra de materia hará que su temperatura aumente. De manera similar, disminuir la magnitud de energía térmica en una muestra de materia hará que su temperatura disminuya. Este texto ha sido adaptado de <a href="https://openstax.org/books/chemistry-2e/pages/5-1-energy-basics">Openstax, Chemistry 2e, Sección 5.1: Energy Basics</a>.

Tipos de Energía Cinética

La cantidad de energía cinética de un objeto depende de su masa y velocidad. Considere dos bolas de diferentes masas rodando por un plano inclinado al mismo tiempo ...

Education

Educación

JoVE Core

Physics

Física

Unit 1

Unidad 1

Work and Kinetic Energy

Trabajo y Energía Cinética

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

how mass and speed affect kinetic energy

Kinetic energy depends on an object’s mass and speed. A heavier object moving at the same speed has more kinetic energy than a lighter one. An object moving faster also has more kinetic energy when the mass stays the same.

The transcript also describes several forms of kinetic energy. Mechanical energy is linked to the motion of an object. A bullet fired from a gun and water flowing down a dam are examples of mechanical energy.

Electrical energy comes from the flow of electric charges. Lightning during a thunderstorm is one example, and electrical circuits and devices are others. Radiant energy travels as electromagnetic waves and can be experienced as light and heat. Sunlight is an example of radiant energy.

Thermal energy is related to the random motion of atoms and molecules. Temperature measures the average kinetic energy of the particles in an object. When atoms and molecules move or vibrate quickly, the object has a higher average kinetic energy and a higher temperature. When they move more slowly, the average kinetic energy and temperature are lower. If no chemical reaction or phase change occurs, adding thermal energy raises temperature, and removing thermal energy lowers it.

How Mass and Speed Affect Kinetic Energy

work

Work in Physics: Force and Motion

Work in physics connects force, motion, and energy transfer. Work is done when a force acts on an object and that object moves from one position to another. If there is no displacement, no work is done, even if a force is present. The amount of work depends on the force and the direction of motion. For a very small displacement, the work done is written as the dot product of force and displacement vectors. That means work depends on the size of the vectors and the angle between them. You can...

positive, negative, and zero work

How Force Direction Changes Work

Work in physics depends on the direction of a force and the way an object moves. Work is done when energy is transferred to an object. It happens when a force acts on a body that moves from one position to another. The work done by a force is defined as the integral of the force with respect to displacement along the path. Forces can change with position, and an object can move along different paths between the same two points. In vector form, the size of a force times the cosine of the angle...

energy

Energy Sources and Forms in Matter

Energy in matter comes from the Sun and changes form in many everyday processes. The universe is made of matter in different forms, and all forms of matter contain energy. On Earth, many energy sources can be traced back to the Sun, which is the ultimate energy source. Plants capture light energy from the Sun during photosynthesis and convert it into chemical energy. This stored energy can then be used in several ways. People get energy from plant foods, and wood or coal, which are fossilized...

types of potential energy

Potential Energy Examples in Everyday Physics

Potential energy is stored energy, and it appears in several everyday forms. It is also called energy at rest because it is ready to be used later. In physics, different systems can store energy in different ways. Gravitational potential energy is the energy stored by an object because of its position. An apple hanging from a tree is one clear example. Electrical potential energy is stored when electric charges attract or repel each other. Chemical potential energy is stored in the bonds...

types of kinetic energy

Kinetic energy depends on an object’s mass and speed. A heavier object moving at the same speed has more kinetic energy than a lighter one. An object moving faster also has more kinetic energy when the mass stays the same. The transcript also describes several forms of kinetic energy. Mechanical energy is linked to the motion of an object. A bullet fired from a gun and water flowing down a dam are examples of mechanical energy. Electrical energy comes from the flow of electric charges.

kinetic energy - i

Motion Energy in Collisions

Kinetic energy is the energy of motion. It depends on how fast an object moves, not on the direction of its velocity. In classical mechanics, this idea helps explain how moving bodies affect other bodies during collisions. A classic example is a perfectly elastic, head-on collision between two identical bodies, with one body initially at rest. After the collision, the first body stops, and the second body moves away with the first body's original velocity. This same pattern can be seen in...

kinetic energy - ii

Kinetic Energy, Momentum, and Reference Frames

Kinetic energy depends on mass, speed, momentum, and the frame of reference. For a particle, it is one-half of the particle’s mass times the square of its speed. The same idea can also be written in terms of mass and momentum instead of mass and velocity. The units of kinetic energy are mass times speed-squared. These units match the units of work. Force times distance also gives the same units, so kinetic energy and work are measured in joules. That is why work and kinetic energy are two...

work-energy theorem

Work Done and Kinetic Energy

Work done by the net force is linked to an object's kinetic energy. In physics, the net force is the total force acting on an object. Kinetic energy is the energy of motion. The work-energy theorem states that the work done by all forces on an object equals the change in its kinetic energy. This relationship is useful when acceleration is not constant. If the change in velocity is known, the theorem can still help calculate the work done by a force. It connects force, motion, and energy in a...

work and energy for variable forces

Variable Force Work via Graphs and Energy

Variable force work and energy can be found by using force-displacement graphs and the work-energy principle. When a force changes as an object moves, the calculation is more complex than for a constant force. Work is the product of force and displacement, and energy is the capacity of a system to do work. For a constant force, work is found by multiplying the force by the distance moved in the direction of the force. For a variable force, the work done is the area under the force-displacement...

/files/media/science-education/science-education-thumbs/14699.jpg

work-energy theorem for motion along a curve

work-energy-theorem-for-motion-along-a-curve

Work-Energy Along Curved Paths

The work-energy theorem can be applied to motion along a curved path. A curved path can be treated as many tiny straight paths added together. On each small part, the force can be taken as constant, so the work-energy theorem can be used there. The total result comes from adding the work done along all of those small path segments. The net work is found with an integral, which adds the work from each infinitesimal path. The total change in kinetic energy is the sum of the changes along the way.

/files/media/science-education/science-education-thumbs/14700.jpg

work done over an inclined plane

Gravity and Work on Sloped Motion

Gravity and work on sloped motion can be described with the center-of-mass framework. For a rigid body, internal forces do no work, so they can be ignored. The work-energy theorem then uses only the external forces. The work done by gravity depends on the path of the body’s center of mass. If gravity helps increase kinetic energy, the work is positive. If an object is lifted against gravity, the work is negative because kinetic energy decreases. For horizontal motion, the work done by or...

/files/media/science-education/science-education-thumbs/14701.jpg

work done by many forces

Calculating Work from Multiple Forces

Calculating work from multiple forces can be done in two ways, and both methods give the same result. One method finds the work done by each force first. The other method finds the net force by adding the force vectors first.

/files/media/science-education/science-education-thumbs/14735.jpg

work done by gravity

Gravity and Positive vs Negative Work

Gravity is one of the four fundamental forces in nature. On Earth, the force between an object and Earth is called gravity. Gravity does work on an object when it moves the object toward Earth’s center. In that case, the work done by gravity is positive. When an external force lifts an object away from Earth’s center, that force works against gravity. The net work done in this case is negative. If an object moves along the Earth with no change in distance toward or away from Earth’s center,...

/files/media/science-education/science-education-thumbs/14750.jpg

power

Power in Work and Motion

Power connects work with the time needed to do it. Work depends on force and displacement. The work-energy theorem also links net work on an object to the change in its kinetic energy between two points on its path. These ideas do not include time directly, but time still matters in many real situations. A sprinter is a clear example. Two runners may reach the same finish speed, so they do the same amount of work. The winner is the one who reaches that speed in less time. Power describes this...

power expended by a constant force

Power as the Rate of Doing Work

Power describes how fast work is done. In physics, two sprinters can cross the finish line with the same velocity and do the same amount of work, but the one who finishes first has greater power because the work takes less time. Average power is the work done during a time interval divided by that time interval. When the time interval becomes very small, this becomes instantaneous power. That gives the power at a specific moment instead of over a longer stretch of time. Power can also be...

key terms and concepts

Explore how mass and speed change kinetic energy, plus examples of mechanical, electrical, radiant, and thermal energy for high school science.

How Mass and Speed Affect Kinetic Energy | JoVE K12

physics

JoVE Core Física presenta la teoría y la aplicación de conceptos físicos fundamentales, como la cinemática, dinámica, mecánica de fluidos, estática, ondas y acústica, mediante animaciones audiovisuales concisas y fáciles de entender. Además, los vídeos de científicos en acción muestran la aplicación de los conceptos relacionados en experimentos de investigación clásicos y originales, realizados en laboratorios de todo el mundo.

PS.Phy.6.1

Pennsylvania State Academic Standards

3.2.9-12.P

3.2.9-12.Q

Louisiana Student Standards for Science

High School

Chemistry

HS-PS3-3

HS-PS3-2

HS-PS3-1

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Energy And Waves

Conservation of energy

Tennessee Academic Standards

PHYS.PS3.1

CHEM1.PS3.1

Minnesota Academic Standards in Science

2.2.1 9P.2.2.1.1

new-jersey-student-learning-standards-for-science

New Jersey Student Learning Standards for Science

Alabama Course of Study Science

9-12.PS.1.1

9-12.PS.1.1.a

9-12.P.2.3.b

Next Generation Science Standards

Florida Department of Education

SC.912.P.10

SC.912.P.10.1

SC.912.P.12

SC.912.P.12.9

Texas Essential Knowledge and Skills

PHYS.7

PHYS.7.B

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

P-PS3-3

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Energy

HS-PS3-1.

Georgia Standards of Excellence

SPS7.

Types of Energy

Energy Basics

Chemical reactions, such as those that occur when you light a match, involve changes in energy as well as matter.

Chemical changes and their accompanying ...

Mechanisms of Heat Transfer I

Just as interesting as the effects of heat transfer on a system are the methods by which the heat transfer occur. Whenever there is a temperature ...

Mechanisms of Heat Transfer II

In convection, thermal energy is carried by the large-scale flow of matter. Ocean currents and large-scale atmospheric circulation, which result from the ...

conduction-convection-and-radiation-problem-solving

Conduction, Convection and Radiation: Problem Solving

There are three methods by which heat transfer can take place: conduction, convection, and radiation. Each method has unique and interesting ...

Use models to explain thermal energy and its transfer.

PS.PSc.7.1

The universe is composed of matter in different forms, and all forms of matter contain energy.&#160; The different forms of energy on Earth originate from ...

Types of Potential Energy

Potential energy is also known as energy at rest or stored energy. Common types of potential energy include the gravitational potential energy stored in ...

The amount of kinetic energy of an object depends on its mass and speed. Consider two balls of different masses rolling down an inclined plane at the same ...

Conservation of Mechanical Energy

The mechanical energy E of a system is the sum of its potential energy U and the kinetic energy K of the objects within it. What happens to this ...

/files/media/science-education/science-education-thumbs/14702.jpg

Conservative Forces

According to the law of conservation of energy, any transition between kinetic and potential energy conserves the total energy of the system. Hence, the ...

Non-conservative Forces

Non-conservative forces are dissipative forces such as friction or air resistance. These forces take energy away from a system as it progresses. Unlike ...

Conservation of Energy

The terms &#39;conserved quantity&#39;&#160;and &#39;conservation law&#39;&#160;have specific scientific meanings in physics, which differ from the ...

Conservation of Energy: Application

When solving problems using the energy conservation law, the object (system) to be studied should first be identified. Often, in applications of energy ...

Use mathematics and computational thinking to explain the Law of Conservation of Energy in a mechanical system in terms of kinetic and potential energy.

Work

Work is done when energy is transferred from one object to another. In other words, work is when a force acts on something that undergoes a displacement ...

Positive, Negative, and Zero Work

Work is done on an object when energy is transferred to the object. In other words, work is done when a force acts on a body that undergoes a displacement ...

Work-energy Theorem

According to Newton&#x2019;s second law of motion, the sum of all the forces acting on a particle (net force) determines the rate of change in the ...

Work and Energy for Variable Forces

When an object is acted upon by a variable force, the amount of work done and the change in energy of the object can be more complex to calculate compared ...

Work-Energy Theorem for Motion Along a Curve

The work-energy theorem can be generalized to the motion of a particle along any curved path. The simple argument here is that the curved path can be ...

Work Done Over an Inclined Plane

The center-of-mass framework helps to easily describe the work done on rigid bodies. Since the internal forces in a rigid body do no work, they can be ...

Work Done by Many Forces

The total work done on an object acted upon by multiple forces can be computed using two methods that give the same result. In one method, the work done ...

Work Done by Gravity

Gravitation is one of the four fundamental forces in nature. The force between objects on Earth and Earth itself is called gravity.
Like other forces, ...

Use mathematics and computational thinking to explain work in terms of the relationship among the applied force to an object, the resulting displacement of the object, and the energy transferred to an object.

PS.PSc.7.3

Power

The concept of work involves force and displacement; meanwhile, the work-energy theorem relates the net work done on a body to the difference in its ...

Power Expended by a Constant Force

The relationship between work done and the time taken to do it can be explained using the concept of power. For example, several sprinters in a race may ...

Construct an explanation to infer the relationship between work and power, both quantitatively and qualitatively.

PS.PSc.7.4

Analyze energy transfers and transformations within a mechanical system.

How Mass and Speed Affect Kinetic Energy

Description

Transcript

Tags

More videos by Standards