Name: finding principal planes and stress limits
Uploaded: 2024-05-23T12:59:54.000Z
Duration: 1 min 15 s
Channel: JoVE

Dos planos que están en ángulo recto soportan esfuerzos cortantes junto con esfuerzos de tracción y compresión. Con los valores de tensión conocidos, determine los planos principales, la tensión cortante máxima y las tensiones principales.
Los planos principales se determinan utilizando la relación en la que el plano principal es igual a la relación entre el doble del esfuerzo cortante y la diferencia entre los esfuerzos de tracción y compresión.
Sustituya los valores conocidos de esfuerzo cortante, esfuerzo normal y esfuerzo de compresión en la ecuación para calcular los valores del plano principal.
A continuación, se determina la tensión normal media calculando el valor medio de las tensiones normales de tracción y compresión.
A continuación, calcule el esfuerzo cortante máximo sustituyendo los valores de esfuerzos normales y cortantes en la ecuación.
Calcule la tensión principal principal sumando el valor medio de la tensión normal a la tensión cortante máxima.
La diferencia entre el valor medio de la tensión normal y la tensión máxima de corte es la tensión principal mínima.

principales tensiones: resolución de problemas

Principal Stresses: Problem Solving

<div>
 Al analizar dos planos que se cruzan en ángulo recto bajo la influencia de esfuerzos cortantes, de tracción y de compresión, es esencial identificar los planos principales, el esfuerzo cortante máximo y los esfuerzos principales. Para encontrar los planos principales, aplique una fórmula que los iguale al doble del esfuerzo cortante dividido por la diferencia entre los esfuerzos de tracción y compresión.
 
 <img alt="Equation 1" src="/files/ftp_upload/15654/15654_Equation_1.svg" style="text-align: center; height: 42px;">
 Al insertar los valores de tensión de corte, tracción y compresión dados en esta fórmula, se pueden calcular las orientaciones de los planos principales. Luego considere el promedio de los esfuerzos de tracción y compresión para determinar el esfuerzo normal promedio. Este paso es importante para comprender la distribución general de tensiones en el material. El esfuerzo cortante máximo se calcula utilizando los valores derivados del esfuerzo cortante y normal.
 
 <img alt="Equation 2" src="/files/ftp_upload/15654/15654_Equation_2.svg" style="text-align: center; height: 52px;">
 Este cálculo resalta el esfuerzo cortante máximo que experimenta el material, lo cual es vital para evaluar su riesgo de falla. La tensión principal principal, que indica la tensión máxima que el material puede soportar sin ceder, se calcula sumando la tensión cortante máxima a la tensión normal promedio. De manera similar, el esfuerzo principal mínimo se encuentra restando el esfuerzo cortante máximo del esfuerzo normal promedio. Estos cálculos son fundamentales para las aplicaciones de ingeniería y proporcionan información sobre el comportamiento del material en condiciones de tensión complejas.
 
</div>

Principales tensiones: resolución de problemas

Dos planos que están en ángulo recto soportan esfuerzos cortantes junto con esfuerzos de tracción y compresión. Con valores de tensión conocidos, determine el ...

Education

Educación

JoVE Core

Mechanical Engineering

Ingeniería Mecánica

Unit 1

Unidad 1

Transformations of Stress and Strain

Transformaciones de esfuerzo y deformación

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

finding principal planes and stress limits

Principal planes and principal stresses are found by analyzing two planes that meet at right angles under shearing, tensile, and compressive stresses. The goal is to use the given stress values to describe how the material is loaded and to locate the planes where the stress state changes.

To find the principal planes, use the formula that relates the plane angle to twice the shearing stress divided by the difference between tensile and compressive stresses. After substituting the known stress values, the orientations of the principal planes can be calculated. This step identifies the directions where the normal stress is principal.

Next, find the average normal stress by taking the average of the tensile and compressive stresses. This value shows the overall normal stress level across the material. It helps describe the stress distribution before the shear and principal values are finalized.

The maximum shearing stress is then calculated from the derived normal and shearing stress values. This result shows the peak shear the material experiences, which is important for judging failure risk. From there, the major principal stress is found by adding the maximum shearing stress to the average normal stress. The minimum principal stress is found by subtracting the maximum shearing stress from the average normal stress. These calculations are useful in engineering because they show how a material behaves under combined loading.

Finding Principal Planes and Stress Limits

finding-principal-planes-and-stress-limits

transformation of plane stress

Plane Stress Changes with Rotation

Plane stress changes with rotation in a material element. The analysis looks at a prismatic element inside a cube under plane stress. As the element turns, the normal stress and shearing stress on its faces change in both size and direction. These changes are described with trigonometric functions of the rotation angle. The forces on the rotated faces are compared with the forces on the original faces that are perpendicular to each principal axis. The equilibrium equations use only the forces...

principal stresses

Stress Circle for Principal and Shear Stress

The stress circle shows how normal stress and shearing stress change with angle on a transformed plane. Its center, C, lies on the vertical axis and represents the average normal stress. The radius shows the amount of stress variation as the plane rotates. Points A and B, where the circle crosses the horizontal axis, mark the maximum and minimum normal stresses. At these points, shearing stress is zero. These points define the principal stress planes, where only normal stress, called principal...

principal stresses: problem solving

Principal planes and principal stresses are found by analyzing two planes that meet at right angles under shearing, tensile, and compressive stresses. The goal is to use the given stress values to describe how the material is loaded and to locate the planes where the stress state changes. To find the principal planes, use the formula that relates the plane angle to twice the shearing stress divided by the difference between tensile and compressive stresses. After substituting the known stress...

mohr&#39;s circle for plane stress

Reading Stress Components with Mohr's Circle

Mohr's circle is a graphical way to read the stress state at a point in a material under plane stress. It turns normal stress and shearing stress into a two-dimensional picture. This makes stress transformation easier to analyze. The method uses Cartesian coordinates. The horizontal axis shows normal stress, written as σ, and the vertical axis shows shearing stress, written as τ. Two points, A and B, are plotted from the stresses on the element. Point A is at (σx, -τxy), and point B is at (σx,...

general state of stress

Stress Tensor and Principal Stresses

The stress tensor describes the internal forces inside a material. It is used when a material is under external force or deformation. At a point such as O, the tensor can show the stress components on any plane through that point. A tetrahedral element helps show how these forces act. One face, XYZ, is perpendicular to the line OA. The other faces line up with the coordinate axes, and point O is the origin. The stress on the tetrahedron is split into normal and shear components on each face. <br...

yield criteria for ductile materials under plane stress

yield-criteria-for-ductile-materials-under-plane-stress

Tresca and Von Mises Yield Criteria

Ductile materials can yield when they are loaded beyond a safe stress level. Engineers use yield criteria to check whether structural elements and machine parts can handle the expected load without permanent deformation. The yield point is first found with a tensile test, which measures how the material responds to uniaxial stress. A tensile test is not enough when a part faces biaxial or plane stress conditions. In those cases, more advanced criteria are needed to predict failure. One common...

transformation of plane strain

Plane Strain Under Rotated Axes

Plane strain changes when the coordinate axes are rotated. This matters for long bars and similar elongated structures that are loaded uniformly on their sides. In these members, one dimension is much larger than the others, so deformation is mainly studied in a single plane. At a point such as O, the key strain components lie along the x and y axes. The strain along the z-axis is negligible in plane strain. Together, the x and y strain components describe the deformation state in the xy-plane.

mohr&#39;s circle for plane strain

Principal and Shear Strains on Mohr’s Circle

Mohr’s circle for plane strain shows how normal strain and shear strain change on a graph. The horizontal axis is normal strain, written as ε, and the vertical axis is shear strain, written as γ. It uses two plotted points, X and Y, to represent the strain state. Point X has coordinates (εx, -γXY), and point Y has coordinates (εY, γXY). The center of the circle, O, gives the average normal strain. The radius comes from the relationship between normal strain and shear strain, so the circle...

three-dimensional analysis of strain

Principal Strain Directions in 3D

Three-dimensional strain analysis shows how a material changes shape when it is loaded. It is especially useful for elastic, homogeneous materials. A small cubic element inside the material can expand or contract along principal stress axes. That change turns the cube into a rectangular parallelepiped, which makes the deformation easier to picture. The principal stress axes are orthogonal, or at right angles to each other. Along these directions, the stress does not create shear inside the...

measurements of strain

How Strain Gauges Measure Deformation

Strain describes how a material deforms when a force is applied. Normal strain compares the change in length with the original length. Engineers use this measure to track stretching or compression in materials. For higher accuracy, they often use electrical strain gauges. A strain gauge has a conductive wire on a paper backing that sticks to the surface of the material. It works through the piezoresistive effect, which means the wire’s electrical resistance changes when the material is bent,...

key terms and concepts

Calculate principal planes, average normal stress, maximum shearing stress, and principal stresses for two perpendicular planes under combined loading.

Finding Principal Planes and Stress Limits | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Finding Principal Planes and Stress Limits

Description

Transcript

Tags