Name: energy stored in loaded rods
Uploaded: 2024-05-23T13:00:11.000Z
Duration: 1 min 20 s
Channel: JoVE

Una carga axial hace que una varilla se alargue y almacene energía de deformación en ella. La densidad de energía de deformación en la varilla es la energía por unidad de volumen.
Aquí, la relación entre la fuerza axial y el área es la tensión, y la relación entre el alargamiento y la longitud original de la varilla es la deformación producida.
Dentro de la región elástica, la densidad de energía de deformación se puede expresar en términos del módulo de elasticidad.
La curva tensión-deformación exhibe una relación lineal en la región elástica, lo que implica que la densidad de energía de deformación sigue la Ley de Hooke. Aquí, al eliminar la tensión, la tensión se vuelve cero. Esta región de densidad de energía se denomina módulo de resiliencia.
En la región plástica, queda cierta tensión permanente incluso después de eliminar la tensión. Por lo tanto, solo se recupera una parte de la densidad de energía de la deformación y la densidad de energía restante se gasta en deformar el objeto en forma de calor. 
El área total bajo la curva se denomina módulo de tenacidad y representa la densidad de energía total requerida para romper la varilla.

densidad de energía de tensión

Strain-Energy Density

<div>
 Comprender la densidad de energía de deformación en materiales bajo carga axial es crucial para evaluar su comportamiento mecánico y durabilidad. Cuando una varilla se somete a tal carga, se alarga y almacena energía, conocida como energía de deformación, como energía potencial dentro del material. Esta energía se mide en términos de energía por unidad de volumen.
 
 En la región elástica de un material, la relación entre la tensión y la deformación es lineal y sigue la ley de Hooke. La densidad de energía de deformación en esta región se calcula a partir del área bajo la curva tensión-deformación hasta el límite elástico. Esta energía almacenada es recuperable y se conoce como módulo de resiliencia, que indica cuánta energía puede absorber el material y aún así volver a su forma original al descargarse.
 
 Más allá del límite elástico, el material se comporta plásticamente deformándose permanentemente. En esta región plástica, sólo una parte de la energía almacenada es recuperable durante la descarga; el resto se pierde en forma de calor o se utiliza en deformación permanente. La energía total que un material puede absorber antes de romperse se mide mediante el módulo de tenacidad.
 
 <img alt="Equation 1" src="/files/ftp_upload/15683/15683_Equation_1v2.svg" style="text-align: center; height: 44px;">
 Este valor es crucial para aplicaciones que requieren alta resistencia al impacto o ductilidad, ayudando en la selección de materiales para aplicaciones específicas y diseñando estructuras para soportar cargas mecánicas.
 
</div>

Densidad de energía de tensión

Una carga axial hace que una varilla se alargue y almacene energía de deformación en ella. La densidad de energía de deformación en la varilla es la energía por unidad de volumen.
Aquí, la relación ...

Education

Educación

JoVE Core

Mechanical Engineering

Ingeniería Mecánica

Unit 1

Unidad 1

Energy Methods

Métodos energéticos

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

energy stored in loaded rods

Energy stored in a rod under axial load helps show how a material will respond to stretching and breaking. When the rod elongates, it stores strain energy as potential energy inside the material. Strain energy density is the amount of that energy per unit volume.

In the elastic region, stress and strain have a linear relationship that follows Hooke's Law. The strain energy density in this region is found from the area under the stress-strain curve up to the elastic limit. This recoverable energy is called the modulus of resilience. It shows how much energy a material can absorb and still return to its original shape when the load is removed.

After the elastic limit, the material enters the plastic region. In this stage, the material deforms permanently, so only part of the stored energy comes back during unloading. The rest is lost as heat or used in permanent deformation. The total energy a material can absorb before rupture is called the modulus of toughness. This value is important when choosing materials for impact resistance and ductility, and for designing structures that must handle mechanical loads.

Energy Stored in Loaded Rods

strain energy

Load-Deformation and Stored Strain Energy

Strain energy is the energy stored in a material when it deforms under load. It is a key idea in materials science and structural engineering. A loaded rod fixed at one end shows this clearly. When an axial force pulls on the free end, the rod stretches and stress builds inside it. As the axial force increases, the rod elongates more. This creates a direct link between the applied force and the amount of deformation. Engineers can show this relationship with a load-deformation plot. The plot...

strain-energy density

Energy stored in a rod under axial load helps show how a material will respond to stretching and breaking. When the rod elongates, it stores strain energy as potential energy inside the material. Strain energy density is the amount of that energy per unit volume. In the elastic region, stress and strain have a linear relationship that follows Hooke's Law. The strain energy density in this region is found from the area under the stress-strain curve up to the elastic limit. This recoverable...

elastic strain energy for normal stresses

elastic-strain-energy-for-normal-stresses

Strain Energy in Stressed Materials

Strain energy in stressed materials describes the energy stored when a material deforms under load. It is an important idea in materials science and engineering. For axial loading with a uniform stress distribution, the stress is the internal force divided by the cross-sectional area, and the strain follows from the stress through the modulus of elasticity. When the stress is uniform, the strain energy density can be found from the product of stress and strain. That density is then integrated...

elastic strain energy for shearing stresses

elastic-strain-energy-for-shearing-stresses

Shear Energy Stored in Twisted Shafts

Shear energy stored in twisted shafts depends on elastic strain energy in a material. This energy is stored when a solid is deformed within its elastic limit. It comes from internal work done against the cohesive forces inside the material. When a material carries shearing stress, it also develops shearing strain. The strain energy density is the energy stored per unit volume. Within the elastic limit, stress is proportional to strain through the modulus of rigidity, so the strain energy...

impact loading

Impact Loading on a Fixed Rod

Impact loading on a fixed rod happens when a moving object strikes a stationary rod that has a uniform cross-sectional area and is fixed at one end. The impact makes the rod deform and begin to develop stress. This setup shows how a sudden hit can store energy in a structure. As the rod moves back toward its original shape, the stress rises to a maximum. At that point, the energy from the moving object has changed from kinetic energy into strain energy. Kinetic energy is the energy of motion,...

impact loading on a cantilever beam

Dropped-Weight Bending of a Cantilever Beam

Dropped-weight bending of a cantilever beam shows how impact loading changes a beam’s shape and stress. The beam has a circular cross-section and is fixed at one end. An object is dropped on the free end from a height h, so its potential energy from gravity becomes kinetic energy at impact. After the object hits the beam, the beam bends and develops a bending moment along its length. The bending is not uniform. The fixed end carries the highest strain energy, which is the energy stored in the...

castigliano&#39;s theorem

Using Strain Energy to Find Deflection

Castigliano's theorem uses strain energy to find deflection and rotation in elastic structures. Strain energy is the work done by external loads during elastic deformation. The theorem links that energy to the movement caused by the load. The key idea is simple. The partial derivative of the total strain energy with respect to a specific force gives the displacement at the point where that force acts. The same method also works for a moment, where the derivative gives the rotation at the point...

castigliano&#39;s theorem: problem solving

Beam Deflection from Central Load

Beam deflection from a central load can be found with Castigliano's theorem. The method applies to a simply supported beam with a point load at the center. It links the deflection at the load point to the strain energy stored in the beam. For this beam, the supports share the load equally. Each support carries half of the force. The bending moment at any point along the beam comes from these reactions and is written using the distance from the nearest support. Castigliano's theorem says the...

key terms and concepts

Learn how axial load, strain energy density, modulus of resilience, and modulus of toughness describe how materials store and release energy.

Energy Stored in Loaded Rods | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Energy Stored in Loaded Rods

Description

Transcript

Tags