Name: measurement precision and significant figures
Uploaded: 2023-04-30T10:48:20.000Z
Duration: 1 min 44 s
Channel: JoVE

La certitude de la mesure dépend de deux facteurs : le nombre de chiffres dans la mesure et la précision de l’instrument utilisé.
Dans une grandeur mesurée, tous les chiffres, y compris le dernier chiffre incertain, sont appelés chiffres significatifs - et peuvent être déterminés à l’aide de règles spécifiques.
Tous les chiffres non nuls et tous les zéros captifs - qui se trouvent entre deux chiffres non nuls - sont significatifs. Par exemple, 28 a deux chiffres significatifs, tandis que 26,25 en a quatre et 208 en a trois.
Les zéros non significatifs ne sont jamais significatifs, car ils ne font que localiser la virgule. Par exemple, 0,00208 a trois chiffres significatifs. De telles quantités peuvent être exprimées à l’aide de notations exponentielles. Ainsi, 0,00208 peut s’écrire 2,08 × 10−3.
Les zéros à droite ne sont significatifs que dans les nombres au format décimal. 2200 a deux zéros à droite et deux chiffres significatifs, tandis que 2200.0 et 2200.1 ont tous deux 5 chiffres significatifs.
Pour les quantités sans virgules, la signification des zéros à droite devient ambiguë. Ainsi, 2200 peut être écrit 2,2 × 103 avec deux chiffres significatifs ou 2,20 x 103 avec trois chiffres significatifs.

règles pour les chiffres significatifs

Dans toute mesure, la précision de l'outil de mesure est un facteur essentiel. Par exemple, une règle ordinaire peut mesurer une longueur au millimètre le plus proche ; en revanche, un pied à coulisse peut mesurer une longueur au centième de millimètre le plus proche. Par conséquent, le pied à coulisse est un outil de mesure plus précis car il peut mesurer des changements de longueur extrêmement minimes. Les mesures seront plus précises si l'outil de mesure est plus précis.

Il convient de souligner que lorsque nous représentons des valeurs mesurées, le dernier chiffre a été calculé d'une certaine manière par la personne effectuant la mesure. Par exemple, une personne mesurant la longueur d'un bâton avec une règle remarque qu'il semble être entre 13,2 cm et 13,3 cm, et donc elle doit estimer la valeur du dernier chiffre. La règle des chiffres significatifs stipule que le dernier chiffre inscrit dans une mesure est le premier chiffre avec une certaine incertitude. Commencez par la première valeur mesurée à gauche et comptez le nombre de chiffres jusqu'au dernier chiffre inscrit à droite pour déterminer le nombre de chiffres significatifs dans une valeur. Les chiffres significatifs représentent la précision de l'outil de mesure utilisé pour mesurer une valeur.

Le texte est adapté de <a href="https://openstax.org/books/university-physics-volume-1/pages/1-6-significant-figures">Openstax, University Physics Volume 1, Section: 1.6 Significant Figures. </a>

Règles pour les chiffres significatifs

Dans toute mesure, la précision de l’outil de mesure est un facteur essentiel. Une règle ordinaire, par exemple, peut mesurer la longueur au plus près ...

Education

Enseignement

JoVE Core

Physics

Physique

Unit 1

Unité 1

Units, Dimensions, and Measurements

Unités, dimensions et mesures

KEY TERMS AND CONCEPTS

TERMES ET CONCEPTS CLÉS

Rules for Significant Figures

measurement precision and significant figures

Measurement precision depends on the tool used, and significant figures show that precision. A ruler can measure length to the closest millimeter. A caliper can measure length to the nearest 0.01 mm, so it gives a more precise measurement because it can detect very small changes in length.

When a value is written from a measurement, the last digit is not exact. The person making the measurement must estimate that digit. For example, a stick that seems to fall between 13.2 cm and 13.3 cm must be recorded with a guessed last digit.

The last digit in a measurement is the first digit with some uncertainty. To find the number of significant figures, start with the first measured value on the left and count through the last digit written on the right. Significant figures show how precise the measuring tool was when the value was recorded.

Measurement Precision and Significant Figures

measurement-precision-and-significant-figures

the scope of physics

How Physics Shapes Science and Technology

Physics studies the interactions of energy, matter, space, and time. It looks for the basic mechanisms that explain natural phenomena. The word physics comes from the Greek word physis, which means nature. Physics helps us understand the natural world at its most fundamental level. It relies on quantitative laws, or rules written in numbers and measurements, to describe how things behave. That approach can also help other fields improve the limits of current technology. Physics matters in...

orders of magnitude

Estimating Scale with Powers of 10

Orders of magnitude help estimate the scale of a number using powers of 10. It is a simple way to round values to the nearest power of 10. This makes it easier to compare very large and very small numbers. To find the order of magnitude of a number, take its base-10 logarithm and round to the nearest integer. The result gives the power of 10 that most closely matches the original value. This method gives a consistent estimate of size without using exact digits. Orders of magnitude are useful...

/files/media/science-education/science-education-thumbs/12596.jpg

models, theories, and laws

Scientific Models, Theories, and Laws

Scientific models, theories, and laws help physicists describe natural phenomena. A model is a simplified version of a physical system that is too complex to study in full. It acts as a rough mental or visual picture of what may be happening. Good models keep the important parts and simplify the rest so the problem becomes workable. The light wave model is one example. Light waves are usually invisible, so they cannot be seen in the same way as water waves. Even so, it is useful to think of...

/files/media/science-education/science-education-thumbs/14686.jpg

units and standards of measurement

SI Units for Physical Quantities

SI units give a standard way to measure physical quantities. A physical quantity can be defined by how it is measured or by how it is calculated from other measurements. For example, the mass and dimensions of a metallic cube can be found with a weighing machine and a meter scale. Some quantities are built from others. The volume of a cube is the cube of its side length. The density of the cube is then found by dividing mass by volume. Measurements are written in units, which are standardized...

estimation of the physical quantities

Fermi Estimation for Physical Quantities

Fermi estimation helps physicists, scientists, and engineers make rough calculations for physical quantities. These estimates are also called guesstimates, order-of-magnitude approximations, back-of-the-envelope calculations, or Fermi calculations. Enrico Fermi was known for making these kinds of estimates with surprising precision. Estimation is not random guessing. It uses prior experience and sound physical reasoning to get a rough value for a quantity. This kind of reasoning helps build...

/files/media/science-education/science-education-thumbs/14734.jpg

base quantities and derived quantities

SI Base Units Behind Measured Quantities

SI base units are the starting point for measuring physical quantities. In any system of units, some quantities must be defined through direct measurement. These are called base quantities, and their units are base units. Other physical quantities are built from these base values by algebraic combinations. These are called derived quantities, and their units are derived units. For example, area comes from two lengths multiplied together. It is a derived quantity and is written in SI base units...

conversion of units

Unit Conversion Steps and Real-World Errors

Unit conversion lets you change a measurement from one unit to another. It is useful in everyday life, such as when a cookbook gives amounts in liters or ounces and you need cups instead. It also helps when directions use feet or meters, but you want to know the distance in miles. The first step is to list the given unit and the unit you need. The second step is to choose a conversion factor, which is a ratio that shows how many of one unit equal another unit. For example, 1,000 meters equal 1...

accuracy and precision

Repeated Measurements in Science

Repeated measurements help scientists check the quality of their results. They are used to judge both precision and accuracy. These two ideas are related, but they do not mean the same thing. Measurements are precise when repeated trials give very similar results. Precision shows how closely the values agree with one another. Measurements are accurate when the result is very close to the true value or the accepted value. Accuracy shows how closely the values agree with the real target. High...

random and systematic errors

How Measurement Errors Affect Results

Measurement errors can change how accurate and precise a result appears. Scientists try to record measurements as carefully as possible, but errors can still happen. These errors are usually random or systematic. Random errors come from inconsistency or fluctuation in the measuring process. They can also come from changes in the quantity being measured. In repeated measurements, random error may make a value appear greater than the true value one time and less than it the next. A simple...

rules for significant figures

Measurement precision depends on the tool used, and significant figures show that precision. A ruler can measure length to the closest millimeter. A caliper can measure length to the nearest 0.01 mm, so it gives a more precise measurement because it can detect very small changes in length. When a value is written from a measurement, the last digit is not exact. The person making the measurement must estimate that digit. For example, a stick that seems to fall between 13.2 cm and 13.3 cm must...

significant figures in calculations

Rounding Rules for Significant Figures

Rounding rules for significant figures help show the right level of certainty in measured results. When a calculation is reported with the correct number of significant figures, it better matches the uncertainty in the measurements. The rounding rule depends on the type of math being done. For addition and subtraction, the result should have the same number of decimal places as the number with the fewest decimal places. For multiplication and division, the result should have the same number of...

dimensional analysis

Dimensional Checks in Physics Equations

Dimensional consistency is a key check in physics equations. It means the dimensions on both sides of an equation must match. The idea helps show whether an equation can represent a real physical law. The first rule is simple: expressions on each side of the equal sign must have the same dimensions. That makes sense because you can only add or subtract quantities of the same type. The second rule says that the input to a standard mathematical function, such as a trigonometric function, a...

problem solving: dimensional analysis

Dimensional Checks for Physics Equations

Dimensional analysis helps check whether physics equations make sense. It compares the dimensions on each side of an equation and shows whether the units are consistent. This method is useful for spotting algebra errors, typos, and for remembering physical laws. A valid equation must follow two rules. First, both sides of an equality must have the same dimension, so only quantities with matching dimensions can be added or subtracted. Second, common math functions such as exponential,...

/files/media/science-education/science-education-thumbs/14687.jpg

solving problems in physics

Physics Problem Solving: Strategy to Check

Physics problem solving uses general physical principles to work out specific situations. It is a key skill in physics, and it can also help with everyday life. The same analytical skills can be used in new situations, while a list of facts can never cover every possible case. Solving physics problems also takes creativity and insight. These skills grow with experience and practice. There is no simple step-by-step method that works for every problem, but a three-stage process can guide the...

key terms and concepts

Learn how ruler and caliper precision affects measurements and how to count significant figures from the first measured digit to the uncertain last digit.

Measurement Precision and Significant Figures | JoVE K12

physics

JoVE Core Physique présente plusieurs branches de la physique fondamentale grâce à des vidéos animées concises et faciles à comprendre ; cela inclut: la cinématique, la dynamique, la mécanique des fluides, la mécanique statique, les ondes et l'acoustique. En parallèle, les vidéos de scientifiques à l'action démontrent l'application de concepts associés à ces domaines dans des expériences de recherche classiques et originales réalisées dans des laboratoires modernes du monde entier.

Measurement Precision and Significant Figures

Description

Transcript

Tags