Name: magnetic fields and moving charges
Uploaded: 2023-09-18T17:11:19.000Z
Duration: 1 min 18 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Physical Science

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.PSc.6.4

Magnetic Force

Considérons deux fils connectés à une batterie.
Si les directions des courants sont opposées, les fils se repoussent. Si les directions sont les mêmes, les fils s’attirent.
Lorsqu’une charge de test est placée à proximité, elle ne subit aucune force, car les fils sont électriquement neutres. Ainsi, la force agissant entre les fils n’est pas électrique ; C’est ce qu’on appelle la force magnétique.
Si une boussole magnétique est placée près du fil, l’aiguille subit une force et est alignée tangentiellement à un cercle autour d’elle. En conséquence, des boucles concentriques de champs magnétiques se forment autour du fil.
Si le pouce pointe dans la direction du courant, les doigts enroulés fournissent la direction du champ magnétique.
Pour un fil avec un courant dans le sens ascendant, le champ magnétique pointe vers l’intérieur du plan et la force magnétique pointe vers la gauche.
Cette combinaison de directions satisfait à la règle de la main droite. La force magnétique sur une charge d’essai Q se déplaçant avec une vitesse v dans un champ magnétique B est Q multipliée par le produit vectoriel de v et B, appelé force de Lorentz.

<ol>
	<li>Griffiths, D.J. (2013). Introduction à l’électrodynamique. 1900 E. Lake Ave., Glenview, Illinois : Pearson ; section 5.1 ; pages 210 à 215.</li>
	<li>Young, H.D. et Freedman, R.A. (2012). La physique universitaire avec la physique moderne. San Francisco, Californie : Pearson ; les articles 27.1 et 27.2 ; Pages 885 et 886.</li>
</ol>

force magnétique

En plus des forces électriques entre des charges électriques, des charges électriques en mouvement exercent des forces magnétiques les unes sur les autres. Un champ magnétique est créé par une charge en mouvement ou un groupe de charges en mouvement appelé courant électrique. Une force magnétique est ressentie par un second courant ou une charge en mouvement en réponse à ce champ magnétique. Fondamentalement, les interactions entre les électrons en mouvement dans les atomes de deux corps produisent des forces magnétiques entre eux.

La force magnétique agissant sur une charge en mouvement a quatre principales propriétés. Premièrement, sa magnitude est proportionnelle à la magnitude de la charge. Deuxièmement, la magnitude de la force est proportionnelle à la magnitude du champ. Pour deux aimants barres identiques au lieu d'un seul, la force sur une particule chargée en mouvement double sans changer sa vitesse et sa charge.

La troisième caractéristique est que la force magnétique dépend de la vitesse de la charge de test, contrairement à la force électrique, qui reste constante que la charge soit en mouvement ou non. Aucune force magnétique n'est exercée sur une particule chargée au repos. Quatrièmement, la force magnétique est toujours perpendiculaire à la vitesse et au champ magnétique.

La force magnétique, F, sur une charge, Q, se déplaçant avec une vitesse, v, dans un champ magnétique, B, est

<img alt="Equation1" src="/files/ftp_upload/14196/14196_Equation_1.png" style="text-align: center; height: 25px;" />

Cette équation est connue sous le nom de loi de la force de Lorentz.

Si la charge, Q, se déplace d'une quantité

<img alt="Equation2" src="/files/ftp_upload/14196/14196_Equation_2.png" style="text-align: center; height: 25px;" />

alors le travail effectué est

<img alt="Equation3" src="/files/ftp_upload/14196/14196_Equation_3.png" style="text-align: center; height: 23px;" />

La combinaison des trois équations conduit à

<img alt="Equation4" src="/files/ftp_upload/14196/14196_Equation_4.png" style="text-align: center; height: 25px;" />

Ainsi, la force magnétique ne réalise aucun travail. Elle ne peut que changer la direction du mouvement d'une charge de test. La vitesse de la particule n'est pas affectée par la force magnétique.

Force magnétique

En plus des forces électriques entre les charges électriques, les charges électriques en mouvement exercent des forces magnétiques les unes sur les autres. Un champ magnétique est créé par un ...

Education

Enseignement

JoVE Core

Physics

Physique

Unit 1

Unité 1

Magnetic Forces and Fields

Forces et champs magnétiques

KEY TERMS AND CONCEPTS

TERMES ET CONCEPTS CLÉS

magnetic fields and moving charges

Magnetic fields and moving charges create magnetic force. A moving electric charge, or a current made of many moving charges, produces a magnetic field. When another current or moving charge enters that field, it feels a magnetic force in response. At the atomic level, magnetic forces come from interactions between moving electrons in the atoms of two bodies.

The strength of magnetic force depends on several factors. It increases with the size of the charge and with the strength of the magnetic field. If two identical bar magnets create the field instead of one, the force on a moving charged particle doubles, while the particle’s charge and velocity stay the same. The force also depends on the particle’s velocity, unlike electric force, which can act whether the charge is moving or not.

A charge at rest does not experience magnetic force. The force is always perpendicular to both the particle’s velocity and the magnetic field. This relationship is described by the Lorentz force law, which gives the magnetic force on a charge moving through a magnetic field.

Because the magnetic force is perpendicular to the motion, it does no work on the charge. Work is the transfer of energy by a force. As a result, the force can change only the direction of motion, not the speed of the particle.

Magnetic Fields and Moving Charges

magnetism

Magnetic Poles and Everyday Uses

Magnetism appears in many everyday objects, from toys and hangers to elevators, doorbells, and computer devices. Magnets have two poles, called north and south. Like poles repel each other, while unlike poles attract. Both poles can also attract unmagnetized iron. A single magnetic pole cannot be isolated, because every part of a magnet contains both a north pole and a south pole. A compass needle is a simple example of a magnet. It is a thin bar magnet suspended at its center, so it can turn...

magnetic fields

Magnetic Force on Moving Charges

Magnetic force on moving charges depends on motion, charge, and field direction. A moving charge or a current creates a magnetic field in the space around it, along with its electric field. That magnetic field can then push on other moving charges or currents in the field. A magnetic field is a vector field, so it has direction as well as strength. At any point, the field direction is the direction a compass needle’s north pole points. The field strength is defined from the force a charged...

magnetic field lines

Reading Magnetic Field Lines

Magnetic field lines show the direction and strength of a magnetic field. They make it easier to picture how a magnet acts in space. Each line forms a closed loop around the magnet. For a bar magnet, the field lines leave the north pole and curve around to the south pole. They then continue through the magnet back to the north pole. This loop has no beginning or end. Magnetic field lines follow clear rules. The magnetic field points tangent to a field line at any point. A small compass points...

magnetic flux

Magnetic Flux Through Surfaces

Magnetic flux through a surface describes how much magnetic field passes across that surface. It is measured in weber (Wb), the SI unit for magnetic flux. Magnetic flux is a scalar quantity, not a vector. Three factors shape magnetic flux. They are the magnetic field strength B, the area the field crosses, and the orientation of the field relative to the surface. For a small area element dA, the flux depends on the part of the magnetic field that is normal, or perpendicular, to that element at...

motion of a charged particle in a magnetic field

motion-of-a-charged-particle-in-a-magnetic-field

Charged Particle Paths in Magnetic Fields

A charged particle in a magnetic field follows a path that depends on the direction of its velocity. When the field is uniform and the particle moves perpendicular to it, the magnetic field is the main factor that controls the motion, especially in a vacuum. The magnetic force is always perpendicular to the direction of motion, so the particle curves into a circle. Because the force stays perpendicular to velocity, it does no work on the particle. The kinetic energy and speed stay constant...

magnetic force

Magnetic fields and moving charges create magnetic force. A moving electric charge, or a current made of many moving charges, produces a magnetic field. When another current or moving charge enters that field, it feels a magnetic force in response. At the atomic level, magnetic forces come from interactions between moving electrons in the atoms of two bodies. The strength of magnetic force depends on several factors. It increases with the size of the charge and with the strength of the...

magnetic force on a current-carrying conductor

magnetic-force-on-a-current-carrying-conductor

Current and Magnetic Field Around a Wire

A current-carrying wire creates a magnetic field around it, and moving charges feel a force in that field. Because the magnetic field produced by moving charges is proportional to current, the wire itself acts as a source of magnetic field. A compass placed near the wire shows this effect by lining up tangentially around the wire. The magnetic field around a straight wire forms concentric circular loops. The right-hand rule helps determine the direction of those loops. If the thumb points in...

magnetic force on current-carrying wires: example

magnetic-force-on-current-carrying-wires-example

Balancing Weight with Magnetic Force

Magnetic force can balance the weight of a current-carrying wire when the wire sits in a magnetic field. Moving charges in the wire feel a force, so the wire itself can be pushed upward or downward. This example uses a flexible wire that is 40 cm long and has a mass of 10 g. It is held in a horizontal position inside a constant 0.40 T magnetic field. The goal is to find the current needed to remove the tension in the supporting leads. To do that, a free-body diagram is drawn first. The diagram...

force on a current loop in a magnetic field

force-on-a-current-loop-in-a-magnetic-field

Current Loops and Torque in Motors

Current loops in a magnetic field create the torque that drives a DC motor. A DC motor converts electrical energy into mechanical work. In a motor, wire loops sit inside a magnetic field. When current flows through the loops, the magnetic field pushes on them and makes the shaft rotate. The current is reversed when the loop lines up with the magnetic field. This keeps the torque on the loop going in the same direction. A commutator and brushes handle this reversal. The commutator switches the...

torque on a current loop in a magnetic field

torque-on-a-current-loop-in-a-magnetic-field

Current Loop Torque in Electric Motors

Current loop torque in electric motors shows how magnetic force can make a wire loop rotate. In an electric motor, loops of wire sit between magnets in a magnetic field. When current flows through the loops, the field applies torque. This rotation turns a shaft and converts electrical energy into mechanical energy. A rectangular current-carrying loop with N turns in a uniform magnetic field has zero net force. Even so, it can still experience net torque. The torque depends on the current I,...

the hall effect

Hall Voltage and Charge Carriers

Hall voltage and charge carriers are explained through Edwin H. Hall’s 1879 experiment. His setup helped identify the polarity of the main charge carriers in a conducting material. It also showed, for the first time, that the charge carriers in most metals are negative. A metal slab is placed in a constant magnetic field. The electrons move from right to left, so the magnetic force pushes them toward the top edge of the slab. This leaves excess negative charge at the top and excess positive...

thomson's e/m experiment

Electron Speed Selector in Thomson’s Tube

A velocity selector uses electric and magnetic fields to choose charged particles with one speed from a beam. Many beams from a heated cathode contain particles moving at different speeds, so this setup helps produce a uniform beam. The electric and magnetic fields are perpendicular to the particle’s motion and to each other. In this arrangement, a particle with charge q, speed v, and mass m enters from the top. The magnetic field points into the plane of the paper, and the electric field...

key terms and concepts

Learn how moving charges create magnetic fields, how magnetic force depends on charge, speed, and field strength, and why it changes direction only.

Magnetic Fields and Moving Charges | JoVE K12

physics

JoVE Core Physique présente plusieurs branches de la physique fondamentale grâce à des vidéos animées concises et faciles à comprendre ; cela inclut: la cinématique, la dynamique, la mécanique des fluides, la mécanique statique, les ondes et l'acoustique. En parallèle, les vidéos de scientifiques à l'action démontrent l'application de concepts associés à ces domaines dans des expériences de recherche classiques et originales réalisées dans des laboratoires modernes du monde entier.

Pennsylvania State Academic Standards

Structure and Properties of Matter

3.2.9-12.A

Louisiana Student Standards for Science

High School

Motion And Stability: Forces And Interactions

HS-PS2-5

HS-PS2-4

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Forces And Motion

Forces

Electricity And Magnetism

Electromagnetic interactions

Tennessee Academic Standards

Energy

PHYS.PS3.9

Virginia  Standards of Learning

HIgh School

PS.9

PS.9.d

PH.7

PH.7.a

PH.7.b

Minnesota Academic Standards in Science

3.1.1 9P.2.2.1.3

new-jersey-student-learning-standards-for-science

New Jersey Student Learning Standards for Science

HS-PS3-5

Arizona Science Standards

HS+Phy.P2

HS+Phy.P2U1.1

Alabama Course of Study Science

waves-and-their-applications-in-technologies-for-information-transfer

Waves and Their Applications in Technologies for Information Transfer

9-12.PS.2.3

9-12.PS.2.3.a

9-12.PS.2.3.b

Next Generation Science Standards

Motion and Stability: Forces and Interactions

Florida Department of Education

SC.912.P.10

SC.912.P.10.10

SC.912.P.10.16

Texas Essential Knowledge and Skills

PHYS.6

PHYS.6.B

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

P-PS3-5

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Linear Momentum

The term momentum is used in various ways in everyday language, most of which are consistent with the precise scientific definition. Generally, momentum ...

Force and Momentum

Force and momentum are intimately related. Force acting over time can change momentum, and Newton&#39;s second law of motion can be stated in its most ...

Analyze and interpret data to explain the motion of an object moving with a constant velocity or that is accelerating.

PS.PSc.4.1

Electrical Current

Electrical current is defined as the rate at which charge flows. When there is a large current present, such as that used to run a refrigerator, a large ...

Drift Velocity

The high speed of electrical signals results from the fact that the force between charges acts rapidly at a distance. Thus, when a free charge is forced ...

Current Density

The total amount of current flowing through one unit value of a cross-sectional area is referred to as current density. If the current flow is uniform, ...

Resistivity

When a voltage is applied to a conductor, an electrical field is generated, and charges in the conductor feel the force due to the electrical field. The ...

Resistance

When a current moves through any conductor, the conductor causes some level of difficulty for the current to flow. The measure of that difficulty is known ...

Ohm's Law

Many materials exhibit a simple relationship between the values of current, voltage, and resistance, known as Ohm&#8217;s law. The current that flows ...

Non-ohmic Devices

In most substances, the current flow is proportional to the voltage applied to it. A simple relationship between the values of current, voltage, and ...

Construct an explanation to compare simple series and parallel circuits in terms of Ohm's Law.

PS.PSc.6.2

Continuity Equation

The total amount of current flowing per unit cross-sectional area is called the current density. Hence, the current passing through a cross-sectional area ...

Boundary Conditions for Current Density

Current density becomes discontinuous across an interface of materials with different electrical conductivities. The normal component of the current ...

Electrical Conductivity

In perfect conductors, the electric field inside is always zero due to the abundance of free electrons, which nullify any field by flowing. As a result, ...

Theory of Metallic Conduction

The conduction of free electrons inside a conductor is best described by quantum mechanics. However, a classical model makes predictions close to the ...

Obtain, evaluate, and communicate information to explain how current is affected by changes in composition, length, temperature, and diameter of wire.

PS.PSc.6.3

Magnetism

Magnets are commonly found in everyday objects, such as toys, hangers, elevators, doorbells, and computer devices. Experimentation on these magnets shows ...

Magnetic Fields

A moving charge or a current creates a magnetic field in the surrounding space, in addition to its electric field. The magnetic field exerts a force on ...

Magnetic Field Lines

The representation of magnetic fields by magnetic field lines is very useful in visualizing the strength and direction of the magnetic field. Each of the ...

Magnetic Flux

The magnetic flux measures the number of magnetic field lines passing through a given surface area. The SI unit for magnetic flux is the weber (Wb). ...

Motion Of A Charged Particle In A Magnetic Field

A charged particle experiences a force when moving through a magnetic field. Consider the field to be uniform and the charged particle to move ...

In addition to the electric forces between electric charges, moving electric charges exert magnetic forces on each other. A magnetic field is created by a ...

Magnetic Force On A Current-Carrying Conductor

Moving charges experience a force in a magnetic field. Since the magnetic fields produced by moving charges are proportional to the current, a conductor ...

Magnetic Force On Current-Carrying Wires: Example

In a magnetic field, moving charges encounter a force. If a wire contains these moving charges, i.e., if the wire is carrying a current, then a force acts ...

Force On A Current Loop In A Magnetic Field

Magnetic forces on wires carrying current are most frequently applied in motors. A DC motor is a device that converts electrical energy into mechanical ...

Torque On A Current Loop In A Magnetic Field

The most common application of magnetic force on current-carrying wires is in electric motors. These consist of loops of wire, which are placed between ...

The Hall Effect

Edwin H. Hall, in the year 1879, devised an experiment that could be used to identify the polarity of the predominant charge carriers in a conducting ...

Magnetic Field due to Moving Charges

A stationary charge creates and interacts with the electric field, while a moving charge creates a magnetic field.
Consider a point charge moving with a ...

Use models to explain magnetism in terms of domains, interactions of poles, and magnetic fields.

Analyze motion in terms of speed, velocity, acceleration, and momentum.

Magnetic Fields and Moving Charges

Description

Transcript

Tags

More videos by Standards