Name: acetic acid buffer changes in titration
Uploaded: 2024-04-04T10:51:19.000Z
Duration: 1 min 17 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Chemistry

Matter and its Interactions

PS.Chm.6.3

solution-composition-during-acidbase-titrations

Solution Composition During Acid/Base Titrations

Rappelons que le titrage de l’acide acétique avec de l’hydroxyde de sodium produit de l’acétate de sodium et de l’eau, ce qui permet d’obtenir un tampon.
La concentration relative des différentes espèces dans la solution tampon en différents points du titrage est indiquée par les valeurs alpha.
Alors que la ligne courbe représente le titrage de l’acide acétique et de l’hydroxyde de sodium, les lignes droites étiquetées alpha-noeud et alpha-un désignent la concentration d’équilibre relative des ions acide acétique et acétate, respectivement.
Initialement, la valeur du nœud alpha de 0,987 suggère que 98,7 % de l’acide acétique est indissocié, les 1,3 % restants constituant des ions acétate.
Au point de croisement ou au point de demi-équivalence, le pH est égal à pKa. En conséquence, la solution a une concentration égale d’acide acétique et d’ions acétate.
Au fur et à mesure que le titrage se poursuit, la concentration de l’acide acétique, alpha-noeud, diminue jusqu’à presque zéro au point d’équivalence. Alternativement, la concentration des ions acétate, alpha-one, augmente et se rapproche de l’unité.

Aucun conflit d’intérêts n’a été déclaré.

composition de la solution pendant les titrages d'acide/base monoprotique

Le titrage d’un acide faible avec une base forte entraîne la formation d’eau et de la base conjuguée de l’acide. Par exemple, le titrage de l’acide acétique avec de l’hydroxyde de sodium conduit à la formation d’eau et d’acétate de sodium. Une solution d'acide acétique et d'acétate de sodium constitue un tampon dont la concentration relative aux différentes étapes du titrage est indiquée par les valeurs α, qui représentent des pourcentages de l'acide faible et de sa base conjuguée.

Les valeurs α0 et α1 représentent respectivement la concentration d’équilibre relative des ions acide acétique et acétate. Avant d’ajouter la base, les valeurs α0 et α1 sont respectivement de 0,987 et 0,013. Cela suggère que la solution comprend 98,7 % d’acide acétique et 1,3 % d’ions acétate. Avec l'ajout d'hydroxyde de sodium pendant le titrage, α0 diminue tandis que α1 augmente. Au point de demi-équivalence, où le pH est égal au pKa de l'acide acétique, la valeur de α0 est égale à α1. La solution à ce stade est un mélange de 50 % d’acide acétique et de 50 % d’ions acétate. Au fur et à mesure du titrage, α0 diminue et sa valeur tombe à zéro au point d'équivalence. Au contraire, la valeur de α1 devient unité.

Composition de la solution pendant les titrages d'acide/base monoprotique

Rappelons que le titrage de l’acide acétique avec de l’hydroxyde de sodium produit de l’acétate de sodium et de l’eau, ce qui permet d’obtenir un tampon.
La concentration relative de la ...

Education

Enseignement

JoVE Core

Analytical Chemistry

Chimie analytique

Unit 1

Unité 1

Acid–Base Titration

Titrages acido-basiques

KEY TERMS AND CONCEPTS

TERMES ET CONCEPTS CLÉS

acetic acid buffer changes in titration

Acetic acid buffer changes during a weak acid–strong base titration. When acetic acid is titrated with sodium hydroxide, the reaction forms water and the conjugate base of the acid, sodium acetate. The mixture of acetic acid and sodium acetate acts as a buffer, which helps show how solution makeup shifts during the titration.

The relative amounts of acetic acid and acetate ions are tracked with α values. Here, α0 represents the equilibrium concentration of acetic acid, and α1 represents the equilibrium concentration of acetate ions. Before base is added, α0 is 0.987 and α1 is 0.013. That means the solution is about 98.7% acetic acid and 1.3% acetate ions.

As sodium hydroxide is added, α0 goes down and α1 goes up. At the half-equivalence point, the pH equals the pKa of acetic acid. At that stage, α0 and α1 are equal, so the solution contains 50% acetic acid and 50% acetate ions. As the titration continues to the equivalence point, α0 drops to zero and α1 becomes unity.

Acetic Acid Buffer Changes in Titration

acid&#8211;base titration: overview

Titration Curves and pH Changes

Acid-base titration uses a known acid or base to find the concentration of an unknown solution. A base can titrate an acid, or an acid can titrate a base. As titrant is added little by little, the pH changes in a predictable way. The pH change is shown on a titration curve. A titration curve plots how the pH of the solution changes as more titrant is added. Scientists use this curve to follow the progress of the titration and to identify the endpoint, which is the point used to stop the...

titration of a strong acid with a strong base

titration-of-a-strong-acid-with-a-strong-base

pH Changes in Strong Acid-Base Titration

pH changes in a strong acid-strong base titration depend on the amount of leftover hydronium or hydroxide ions. A strong acid such as hydrochloric acid fully dissociates in water. That gives the solution hydronium ions and chloride ions, so the starting pH is low. When sodium hydroxide is added, it neutralizes hydronium ions. As more base is added, the concentration of hydronium ions falls and the pH rises. At the equivalence point, the hydronium ions have been neutralized and the solution is...

titration of a weak acid with a strong base

titration-of-a-weak-acid-with-a-strong-base

Weak Acid Titration Curve and pH Stages

Weak acid titration with a strong base changes pH in clear stages. The acid in this example is acetic acid, and the base is sodium hydroxide. Each stage uses a different pH calculation method. At the start, the pH of the weak acid is found with its dissociation constant, Ka, and an ICE table. An ICE table tracks the initial, change, and equilibrium amounts of the acid. This step describes the acid before much base is added. As sodium hydroxide is added, a buffer forms. A buffer is a solution...

titration of a weak base with a strong acid

titration-of-a-weak-base-with-a-strong-acid

Ammonia Titration Curve with HCl

Ammonia titration with hydrochloric acid shows how a weak base behaves as acid is added. The curve is the mirror image of a weak acid titrated with a strong base. In this case, ammonia acts as the weak base, and hydrochloric acid acts as the strong acid. The starting pH of 50 mL of 0.1 M ammonia is found with an ICE table and the Kb value. That calculation gives an initial pH of 11.11. As hydrochloric acid is added, the pH begins to fall. After 25 mL of 0.1 M hydrochloric acid is added, the...

titration of a weak acid with a weak base

titration-of-a-weak-acid-with-a-weak-base

Finding the Endpoint in Weak Acid–Base Titration

Weak acid and weak base titration is used to follow how pH changes as base is added. In this kind of titration, both the acid and the base dissociate only partly. The titration curve shows a slow, gradual pH change instead of a sharp jump. A common example is the titration of acetic acid with ammonia. During the reaction, these two species form ammonium acetate and water. Because the pH changes so gradually, there is no simple indicator that shifts color sharply at the equivalence point. One...

solution composition during acid/base titrations

Acetic acid buffer changes during a weak acid–strong base titration. When acetic acid is titrated with sodium hydroxide, the reaction forms water and the conjugate base of the acid, sodium acetate. The mixture of acetic acid and sodium acetate acts as a buffer, which helps show how solution makeup shifts during the titration. The relative amounts of acetic acid and acetate ions are tracked with α values. Here, α0 represents the equilibrium concentration of acetic acid, and α1 represents the...

mixtures of acids

Finding pH in Acid Mixtures

Finding pH in acid mixtures depends on the acids present and their dissociation constants. When a solution contains two acids, the pH can be found by choosing the method that matches their relative strengths. The key idea is that the stronger acid often controls the hydronium ion level, which is the amount of H3O+ in solution. In a mixture of a strong acid and a weak acid, the strong acid dissociates completely. It becomes the main source of hydronium ions in the solution. The weak acid...

titration in nonaqueous solvents

Nonaqueous Solvents for Sharper Titration Endpoints

Nonaqueous solvents can make acid-base titrations easier to read by giving sharper endpoints. Most acid-base titrations are done in water, but water can compete with weak acids or bases for proton donation or acceptance. That competition can blur the titration curve and make the endpoint less clear. Water also changes the partial ionization of weak acids and bases. For example, water can accept a proton from acetic acid to form hydronium and acetate ions. The hydronium ion is a stronger acid...

titration of polyprotic base with a strong acid

titration-of-polyprotic-base-with-a-strong-acid

Carbonate Buffering in Acid Titration

The titration of sodium carbonate with hydrochloric acid shows how a polyprotic base reacts in stages. A polyprotic base can accept more than one proton, so its titration curve has two equivalence points. These points mark where one form has been fully changed into the next. At the first equivalence point, carbonate ions are completely converted to bicarbonate ions. The region before this point is the carbonate/bicarbonate buffer. In this buffer region, both forms are present in the solution. <br...

titration of polyprotic acids with a strong base

titration-of-polyprotic-acids-with-a-strong-base

Polyprotic Acid Titration Curve Features

Polyprotic acid titration curves show how acids with more than one ionizable proton react with a strong base. Each proton is released in a separate step. Each step has its own dissociation constant, or Ka, and each later Ka is weaker than the one before it. When a polyprotic acid such as sulfurous acid is titrated with sodium hydroxide, the base first neutralizes the first ionizable proton. This forms an intermediate species, such as hydrogen sulfite ions. The first part of the curve looks...

composition of polyprotic acid solutions as a function of ph

composition-of-polyprotic-acid-solutions-as-a-function-of-ph

Polyprotic Acid Titration Fractions at Each pH

Polyprotic acid titration shows how the main species in solution change as pH changes. In a compound of the form H2M, there are two ionizable protons. That means the titration with a base produces two equivalence points on the curve. As base is added, three species can be present in the solution: H2M, HM−, and M2−. Their amounts are shown as fractions called α0, α1, and α2. These alpha values track how much of each form is present at different stages of the titration. At the start of the...

buffers: overview

Buffers and pH Stability

Buffers help keep the pH of a solution stable when small amounts of acid or base are added. They are made from a weak acid and its conjugate base, or from a weak base and its conjugate acid. This balance lets the solution resist large pH changes until the buffer capacity is exceeded. One common buffer uses acetic acid and sodium acetate. Here, CH3COOH acts as the weak acid and CH3COONa provides its salt. Another buffer uses ammonia and ammonium chloride, written as NH3 and NH4Cl. These...

buffers: buffer capacity

Buffer Capacity and pH Resistance

Buffer capacity describes how well a buffer resists changes in pH. It is a quantitative measure, so it tells how much acid or base a one-liter buffer solution can take before its pH shifts by 1 unit. In the equation, beta is the buffer capacity, while Ca and Cb represent the moles of acid and base added. The term dpH means the change in pH. A graph of pH versus the moles of base added to a weak acid with a pKa of 5 shows how buffering works as more base is added. Taking the derivative of that...

leveling effect

How Solvents Limit Acid and Base Strength

The leveling effect explains how a solvent can limit acid and base strength in solution. In acid-base chemistry, the solvent sets a ceiling on how strong an acid or base can act. Stronger acids or bases may react with the solvent itself instead of with the intended compound. When a base is stronger than the conjugate base of the solvent, it deprotonates the solvent first. A conjugate base is the species left after an acid loses a proton. This reaction keeps going until the stronger base is...

key terms and concepts

See how acetic acid and sodium acetate change during a titration, including α values, the half-equivalence point, and the equivalence point.

Acetic Acid Buffer Changes in Titration | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Alabama Course of Study Science

Matter and Its Interactions

9-12.C.1.6.e

Scientific Laws and Theories

Scientific Laws

In science, a law is defined as a concise, verbal or mathematical, statement that summarizes a vast number of experimental observations. ...

The Scientific Method

Chemistry is an empirical science. Scientists often pose questions to understand the chemistry in everyday life and seek answers to these questions. To ...

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

Elements: Chemical Symbols and Isotopes

A chemical symbol is an abbreviation used to indicate an element or an atom of an element. For example, the symbol for mercury is Hg. The same symbol is ...

Use models to explain how the scientific understanding of atomic structure has evolved.

PS.Chm.1.1

Radioactivity and Nuclear Equations

Nuclear chemistry is the study of reactions that involve changes in nuclear structure. The nucleus of an atom is composed of protons and, except for ...

Types of Radioactivity

The most common types of radioactivity are &#945; decay, &#946; decay, &#947; decay, neutron emission, and electron capture.
Alpha (&#945;) decay is the ...

Nuclear Stability

Protons and neutrons, collectively called nucleons, are packed together tightly in a nucleus. With a radius of about 10&#8722;15 meters, a nucleus is ...

Nuclear Binding Energy

The difference between the calculated and experimentally measured masses is known as the mass defect of the atom. In the case of helium-4, the mass defect ...

Radioactive Decay and Radiometric Dating

Radioactivity is a spontaneous disintegration of an unstable nuclide and is a random process, as all the nuclei in the sample do not decay simultaneously. ...

Nuclear Fission

Many heavier elements with smaller binding energies per nucleon can decompose into more stable elements that have intermediate mass numbers and larger ...

Nuclear Power

Controlled nuclear fission reactions are used to generate electricity. Any nuclear reactor that produces power via the fission of uranium or plutonium by ...

Nuclear Fusion

The process of converting very light nuclei into heavier nuclei is also accompanied by the conversion of mass into large amounts of energy, a process ...

Nuclear Transmutation

Nuclear transmutation is the conversion of one nuclide into another. It can occur by the radioactive decay of a nucleus, or the reaction of a nucleus with ...

Use models to compare nuclear reactions including alpha decay, beta decay and gamma decay; nuclear fusion and nuclear fission.

PS.Chm.1.2

Atomic Orbitals

An atomic orbital represents the three-dimensional regions in an atom where an electron has the highest probability to reside. The radial distribution ...

The Pauli Exclusion Principle

The arrangement of electrons in the orbitals of an atom is called its electron configuration. We describe an electron configuration with a symbol that ...

The Energies of Atomic Orbitals

In an atom, the negatively charged electrons are attracted to the positively charged nucleus. In a multielectron atom, electron-electron repulsions are ...

The Aufbau Principle and Hund's Rule

To determine the electron configuration for any particular atom, we can build the structures in the order of atomic numbers. Beginning with hydrogen, and ...

electron-configuration-of-multielectron-atoms

Electron Configuration of Multielectron Atoms

The alkali metal sodium (atomic number 11) has one more electron than the neon atom. This electron must go into the lowest-energy subshell available, the ...

Use models to explain how electrons are distributed in atoms.

PS.Chm.1.3

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

Atomic Mass

Atoms &mdash; and the protons, neutrons, and electrons that compose them &mdash; are extremely small. For example, a carbon atom weighs less than 2 ...

Molar Mass

The identity of a substance is defined not only by the types of atoms or ions it contains but by the quantity of each type of atom or ion. For example, ...

Use the Periodic Table as a model to predict the relative properties of elements based on the pattern of valence electrons in the outermost energy levels of atoms.

PS.Chm.2.1

atomic-radii-and-effective-nuclear-charge

Atomic Radii and Effective Nuclear Charge

The elements in groups of the periodic table exhibit similar chemical behavior. This similarity occurs because the members of a group have the same number ...

Ionic Radii

Ionic radius is the measure used to describe the size of an ion. A cation always has fewer electrons and the same number of protons as the parent atom; it ...

Ionization Energy

The amount of energy required to remove the most loosely bound electron from a gaseous atom in its ground state is called its first ionization energy ...

Electron Affinity

The electron affinity (EA) is the energy change for adding an electron to a gaseous atom to form an anion (negative ion).



This process can be either ...

Construct an explanation to infer the atomic size, reactivity, electronegativity, and ionization energy of an element based on its position in the Periodic Table.

PS.Chm.2.2

Types of Chemical Bonds

Chemical bonding theories were pioneered by American chemist Gilbert&#xA0;N. Lewis. He developed a model called the Lewis model to explain the type and ...

Lewis Symbols and the Octet Rule

Chemical bonds are complex interactions between two or more atoms or ions, which reduce the potential energy of the molecule. Gilbert N. Lewis developed a ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&#xA0;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

trends-in-lattice-energy-ion-size-and-charge

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&#xA0;

Electronegativity values of ...

bond-polarity-dipole-moment-and-percent-ionic-character

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Resonance

The Lewis structure of a nitrite anion (NO2&minus;) may actually be drawn in two different ways, distinguished by the locations of the N-O and N=O ...

Formal Charges

In some cases, there are seemingly more than one valid Lewis structures for molecules and polyatomic ions. The concept of formal charges can be used to ...

Exceptions to the Octet Rule

Many covalent molecules have central atoms that do not have eight electrons in their Lewis structures. These molecules fall into three categories:


	...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

Analyze and interpret data to explain the mechanisms and properties of the two main types of intramolecular (ionic and covalent) bonds.

PS.Chm.3.1

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

Intermolecular vs Intramolecular Forces

Intermolecular forces (IMF) are electrostatic attractions arising from charge-charge interactions between molecules. The strength of the intermolecular ...

Intermolecular Forces

Atoms and molecules interact through bonds (or forces): intramolecular and intermolecular. The forces are electrostatic as they arise from interactions ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

surface-tension-capillary-action-and-viscosity

Surface Tension, Capillary Action, and Viscosity

Surface Tension
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded ...

Hydrogen Bonds

Hydrogen BondsHydrogen bonds are weak attractions between atoms that have formed other chemical bonds. One of these atoms is electronegative, like oxygen, ...

Construct an explanation to summarize the influences intermolecular forces have on the properties of chemical compounds.

PS.Chm.3.2

Analyze the structure of atoms and isotopes.

Acetic Acid Buffer Changes in Titration

Description

Transcript

Tags

More videos by Standards