Name: how three-phase power delivers electricity
Uploaded: 2024-07-08T13:19:57.000Z
Duration: 1 min 22 s
Channel: JoVE

En général, les systèmes de distribution d’énergie CA sont classés en monophasé, biphasé ou triphasé.
Les circuits monophasés impliquent une source unique connectée aux charges par des systèmes à deux fils.
Les systèmes monophasés sont utilisés dans les ménages pour alimenter des appareils de 120 V et 240 V tels que des lampes, des téléviseurs ou des climatiseurs centraux.
Un système triphasé à trois fils a deux sources, où la tension générée par la seconde est en retard sur l’autre de 90 degrés.
En revanche, un système triphasé à quatre fils se compose de trois sources de même amplitude, de même fréquence et de même différence de phase de 120 degrés, connectées à trois charges.
La source triphasée et la charge triphasée peuvent être connectées en Y ou en triangle.
Ces circuits sont utilisés dans des applications industrielles telles que l’alimentation d’un moteur à induction, si nécessaire, ils peuvent être utilisés pour fournir des entrées monophasées.
La puissance instantanée dans ces systèmes a une pulsation beaucoup plus faible que celle délivrée par un système monophasé, assurant une transmission de puissance plus uniforme et moins de vibrations.
Ils nécessitent moins de matériau conducteur ou de fil pour transmettre la même puissance, ce qui les rend plus économiques que les monophasés.

circuits triphasés

Three-Phase Circuits

Les systèmes de distribution d'énergie CA se divisent en trois catégories : les systèmes monophasés, biphasés et triphasés. Le circuit monophasé, courant dans les environnements résidentiels, utilise généralement un système à deux fils connectant une seule source CA à diverses charges. Ces circuits prennent en charge les appareils électroménagers standard fonctionnant à 120 volts (V) et 240 V, tels que les lampes, les téléviseurs et les micro-ondes. Les premiers générateurs de la centrale hydroélectrique de Niagara Falls installés en 1895 étaient biphasés et conçus par Nikola Tesla. Le système d'alimentation biphasé est moins courant et le système à trois fils intègre deux sources de tension déphasées l'une par rapport à l'autre de 90 degrés.
Le système triphasé à quatre fils est le plus répandu dans les applications industrielles. Ce système comprend trois sources CA identiques en amplitude et en fréquence mais présentant une différence de phase de 120 degrés entre elles. Les charges d'un tel système peuvent être connectées soit dans une configuration Y (étoile), soit dans une configuration triangle (Δ).
L'avantage des circuits triphasés réside dans leur efficacité et leur stabilité. Ils fournissent de la puissance avec des pulsations plus faibles que les systèmes monophasés, ce qui se traduit par une transmission de puissance plus fluide et une minimisation des vibrations, un facteur crucial pour les machines industrielles telles que les moteurs à induction. Un autre avantage est la quantité réduite de matériau conducteur nécessaire pour transmettre une quantité donnée de puissance, ce qui rend les systèmes triphasés plus rentables que leurs homologues monophasés.
La relation entre les tensions et courants de ligne et de phase dans les systèmes triphasés connectés en Y est donnée par :

<img alt="Equation 1" src="/files/ftp_upload/15126/15126_Equation_1.svg" style="text-align: center; height: 22px;">
<img alt="Equation 2" src="/files/ftp_upload/15126/15126_Equation_2.svg" style="text-align: center; height: 22px;">
Et pour les systèmes connectés en Δ :
<img alt="Equation 3" src="/files/ftp_upload/15126/15126_Equation_3.svg" style="text-align: center; height: 20px;">
<img alt="Equation 4" src="/files/ftp_upload/15126/15126_Equation_4.svg" style="text-align: center; height: 22px;">
Ces équations montrent la relation entre les tensions et les courants entre phases avec ceux de chaque phase, ce qui est essentiel lors du calcul de la puissance totale dans les systèmes triphasés. La puissance totale pour les connexions Y et Δ peut être trouvée en utilisant :
<img alt="Equation 5" src="/files/ftp_upload/15126/15126_Equation_5.svg" style="text-align: center; height: 20px;">
où ϕ est l'angle du facteur de puissance, qui affecte l'efficacité de la transmission de puissance.

Circuits triphasés

En général, les systèmes de distribution d’énergie CA sont classés en monophasé, biphasé ou triphasé.
Les circuits monophasés impliquent une seule source ...

Education

Enseignement

JoVE Core

Electrical Engineering

Génie électrique

Unit 1

Unité 1

KEY TERMS AND CONCEPTS

TERMES ET CONCEPTS CLÉS

how three-phase power delivers electricity

Three-phase power is a major part of AC power distribution, especially where steady and efficient electricity delivery is needed. AC systems are grouped into single-phase, two-phase, and three-phase systems. These categories help describe how power moves from the source to the load.

Single-phase circuits are common in homes. They usually use a two-wire system that connects one AC source to loads. These circuits can supply everyday appliances such as lamps, televisions, and microwaves at 120 V and 240 V.

Two-phase supply systems are less common. The first generators at the Niagara Falls hydro plant, installed in 1895, used two-phase power and were designed by Nikola Tesla. In a two-phase system, a three-wire setup uses two voltage sources that are 90 degrees out of phase.

Three-phase systems are used most often in industrial settings. A three-phase, four-wire system uses three AC sources with the same amplitude and frequency, and each source is shifted by 120 degrees. Loads in these systems can be connected in a Y, or star, configuration or in a delta (Δ) configuration.

Three-phase circuits are valued for efficiency and stability. They deliver power with less pulsation than single-phase systems, so the flow is smoother and vibrations are reduced. This matters for industrial machines such as induction motors. Three-phase systems also need less conductor material to deliver the same amount of power, which makes them more cost-effective than single-phase systems.

The line and phase values are related differently in Y-connected and Δ-connected systems. These relationships between line-to-line voltage and current and the values in each phase are important when calculating total power. Total power in both Y and Δ connections is found using an equation that includes the power factor angle, φ, which affects power transmission efficiency.

How Three-Phase Power Delivers Electricity

how-three-phase-power-delivers-electricity

three-phase circuits

Three-phase power is a major part of AC power distribution, especially where steady and efficient electricity delivery is needed. AC systems are grouped into single-phase, two-phase, and three-phase systems. These categories help describe how power moves from the source to the load. Single-phase circuits are common in homes. They usually use a two-wire system that connects one AC source to loads. These circuits can supply everyday appliances such as lamps, televisions, and microwaves at 120 V...

generation of three-phase voltage

Three-Phase AC Generator Windings

A three-phase AC generator uses rotating magnet windings and a stationary stator to make three-phase voltage. The rotor carries a magnet that spins inside the stator. The stator holds the three-phase winding, and mutual induction creates the voltage. The stator windings are spread evenly around the inside of the stator. They are placed 120 electrical degrees apart. These windings consist of three separate coils, or groups of coils, called phases. The phases can be connected in a Y, or star,...

three-phase voltages

Three-Phase Power Connections

Three-phase power connections use balanced voltages that are equal in magnitude and separated by 120 degrees. A three-phase generator produces these voltages, and the balance helps reduce power loss while keeping energy delivery steady to connected loads. Three-phase sources can be arranged in either wye or delta form. The loads connected to the system can also use wye or delta. This flexibility gives control over how the system is designed and managed. In a wye connection, one end of each...

the y-to-y circuit

Balanced Wye-to-Wye Neutral Current

A balanced wye-to-wye circuit uses three wye-connected sinusoidal voltage sources and three wye-connected loads. A neutral wire links the neutral node of the source to the neutral node of the load. The load impedance is connected across each phase of the load. The source and load can be connected in either a four-wire or a three-wire arrangement. A three-phase system is balanced when each phase has the same load. In that case, the current flow and phase angle are uniform across the system. If...

the y-to-delta circuit

Wye Source and Delta Load Currents

A balanced wye source and delta load form a common three-phase circuit with no neutral line connection. The source is Y-connected, and the load is delta-connected. To analyze the circuit, the first step is to assume a positive phase sequence. These phase voltages are then used to find the line voltages that appear across the delta load impedances. In the wye source, the phase voltages are V an, V bn, and V cn. In the delta load, the line voltages are V ab, V bc, and V ca. These line voltages...

the delta-to-delta circuit

Balanced Delta-Delta Power Circuit

A balanced delta-delta power circuit uses a delta-connected source and a delta-connected load. The two deltas form a closed loop that creates three separate phases. In this setup, the phase voltages are the same as the line voltages. If the source is in positive sequence, the phase voltages can be written directly, and no neutral wire is needed. The delta-connected load current is found by dividing the phase voltage by the impedance of each phase. For line current, Kirchhoff’s Current Law...

the delta-to-y circuit

Delta-Wye Source and Load Connections

A balanced delta-wye circuit connects a delta-connected source to a wye-connected load. In this setup, the phase voltage of the delta source equals the line voltage of the wye load. The source also sets the line currents that flow into the load. For a balanced system, the phase difference between currents makes it possible to find one line current from the other by using the positive sequence of phases. In the wye-connected load, each phase current equals the line current from the delta source.

power in a three-phase circuit

Balanced Three-Phase Power Calculation

Balanced three-phase power calculation depends on the wye and delta connections used in the circuit. A wye, or star, configuration can use three wires or four wires. A delta configuration connects the components in a closed loop. These connection types change how voltages and currents are arranged, but both are used in three-phase systems. In a balanced three-phase system, instantaneous power is the power at one exact moment. Even though the power in each phase changes over time, the total...

power distribution in three-phase and single phase circuits

power-distribution-in-three-phase-and-single-phase-circuits

Single-Phase vs. Three-Phase Power Loss

Single-phase and three-phase circuits distribute electrical power in different ways. Single-phase power is common in homes, while balanced three-phase power is widely used in industrial settings with heavy machinery. Both systems deliver energy, but their current flow and wire needs are not the same. A single-phase circuit usually uses a two-wire system. The current depends on the power absorbed by the load and the line voltage. Because wire loss from resistance follows the square of the...

line loss

Reducing Power Loss in Three-Phase Lines

Three-phase power lines can lose energy as electricity travels from the source to the load. This line loss affects how efficiently power reaches the load. In balanced three-phase circuits, the symmetry makes the analysis easier because one phase can represent the whole system. The source-load connection can use wye, also called star, or delta configurations. These setups change the relationship between line voltage, phase voltage, line current, and phase current. A per-phase equivalent circuit...

reducing line loss

Cutting Heat Loss in Three-Phase Lines

Three-phase power systems can lose energy as heat in transmission lines because the wires have resistance. This line loss becomes important when electricity travels over a distance. A common solution is to use transformers to change the voltage and current in the system. The setup uses two three-phase transformers. A step-up transformer is placed at the source, and a step-down transformer is placed at the load. Raising the voltage at the source lowers the current in the transmission lines, and...

key terms and concepts

Explore how three-phase AC power works, why industry uses Y and delta connections, and how smoother, more efficient power delivery is calculated.

How Three-Phase Power Delivers Electricity | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

How Three-Phase Power Delivers Electricity

Description

Transcript

Tags