Name: stress-strain limits in materials
Uploaded: 2024-03-07T13:22:36.000Z
Duration: 1 min 26 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Physics

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.Phy.2.5

Hooke's Law

La loi de Hooke stipule que la contrainte appliquée à un matériau est directement proportionnelle à la déformation qu'il subit à l'intérieur de la limite élastique. Pour les matériaux ductiles, la limite élastique s’aligne souvent sur la limite d’élasticité.
La constante de proportionnalité, connue sous le nom de module d’élasticité, a les mêmes unités que celle de la contrainte puisque la déformation est une grandeur sans dimension.
Les propriétés physiques des métaux de construction sont affectées par le processus de fabrication utilisé. Les diagrammes de contrainte-déformation du fer pur et de trois nuances d’acier différentes montrent des variations significatives de limite d’élasticité, de résistance ultime et de point de rupture.
Cependant, ils possèdent le même module d’élasticité : leur rigidité dans la plage linéaire est la même. Ainsi, si un acier à haute résistance est substitué à un acier à faible résistance dans une structure ayant les mêmes dimensions, celle-ci aura une capacité de charge accrue.
Dans les matériaux isotropes, comme les métaux, la relation contrainte-déformation est indépendante de la direction de la charge. Cependant, pour les matériaux anisotropes, tels que les composites renforcés de fibres, les modules d’élasticité diffèrent considérablement dans les directions parallèles et perpendiculaires aux fibres, ce qui entraîne des résistances différentes à la charge.

loi de hooke

La loi de Hooke, principe central de la science des matériaux, établit que la déformation subie par un matériau est directement proportionnelle à la contrainte appliquée, définie par un facteur appelé module d'élasticité ou module d'Young.

<img alt="Equation 1" src="/files/ftp_upload/15592/15592_Equation_1.svg" style="text-align: center; height: 18px;">
<img alt="Equation 2" src="/files/ftp_upload/15592/15592_Equation_2.svg" style="text-align: center; height: 22px;">
La mise en œuvre de la loi de Hooke reste valable jusqu'à ce que le matériau atteigne sa limite proportionnelle. Au-delà de ce point, la relation contrainte-déformation devient non linéaire. Cette limite coïncide souvent avec la limite d’élasticité des matériaux de nature ductile. Cependant, l’identification de cette limite pour d’autres types de matériaux peut s’avérer difficile en raison de la non-linéarité de la relation contrainte-déformation.

Les matériaux sont classés en deux types principaux en fonction de leurs caractéristiques mécaniques, telles qu'isotropes et anisotropes. Les matériaux isotropes, tels que les métaux, présentent des propriétés constantes quelle que soit la direction de la charge. En tant que tel, leur relation contrainte-déformation, y compris le module d'élasticité, reste constante quelle que soit la direction de la contrainte appliquée. En revanche, les matériaux anisotropes comme les composites renforcés de fibres présentent des propriétés mécaniques qui dépendent de la direction de la charge. Ces matériaux sont constitués de fibres d'un matériau robuste incorporées dans une matrice plus douce. Les modules d'élasticité dans les directions parallèles et perpendiculaires aux fibres diffèrent considérablement, ce qui entraîne des résistances variables à la charge. La résistance maximale de ces matériaux peut être obtenue lorsque les fibres s'alignent dans la même direction que la charge.

Loi de Hooke

La loi de Hooke stipule que la contrainte appliquée à un matériau est directement proportionnelle à la déformation qu'il subit à l'intérieur de la limite élastique. Pour ductile ...

Education

Enseignement

JoVE Core

Mechanical Engineering

Génie mécanique

Unit 1

Unité 1

Stress and Strain - Axial Loading

Contraintes et déformations - Chargement axial

KEY TERMS AND CONCEPTS

TERMES ET CONCEPTS CLÉS

stress-strain limits in materials

Stress-strain limits in materials explain how solids respond when force is applied. Stress is the applied force per area, and strain is the change in shape or size that results. In the elastic range, strain stays directly proportional to stress. The constant that connects them is called the modulus of elasticity, or Young's modulus.

This linear behavior continues only up to the proportional limit. After that point, the stress-strain relationship becomes nonlinear. For ductile materials, this limit often matches the yield point. For other materials, finding that point can be difficult because the curve no longer follows a simple pattern.

Materials can also be grouped as isotropic or anisotropic based on how their mechanical behavior changes with direction. Isotropic materials, such as metals, have the same properties no matter which way the load is applied. Their stress-strain response and modulus of elasticity stay constant with direction.

Anisotropic materials behave differently. Fiber-reinforced composites are one example. They contain strong fibers inside a softer matrix, and their modulus of elasticity changes depending on whether the load is parallel or perpendicular to the fibers. These materials are strongest when the fibers line up with the direction of the load.

Stress-Strain Limits in Materials

normal strain under axial loading

Axial Stress and Strain in a Rod

Axial stress and strain in a rod describe how a material changes length when a force is applied along its axis. The force may stretch the rod or compress it. In mechanics of materials, this deformation is called normal strain. Normal strain is found by dividing the change in length by the original length. This gives a unitless ratio that shows how much the material deforms under load. A load-deformation diagram can show elongation, but it cannot predict how another rod will deform. When a...

stress-strain diagram

Tensile Test Data and Material Behavior

A stress-strain diagram shows how a material responds during a tensile test. It records the mechanical behavior of a cylindrical specimen as it is pulled by an increasing centric load. The specimen is carefully prepared before testing. Two gauge marks are inscribed on the central part of the specimen. The distance between these marks is the gauge length. As the load increases, the gauge length also increases. This change in length is called elongation. The elongation is measured for each load...

stress-strain diagram - ductile materials

Ductile Material Stress-Strain Stages

Ductile materials such as structural steel and aluminium show a multi-stage stress-strain response. When a specimen is loaded, its length first increases linearly at a slow rate. This produces a steep straight line on the stress-strain diagram. That initial part shows elastic deformation, which means the material returns to its original shape after unloading. When the stress reaches a critical value, plastic deformation begins. In this stage, the material changes shape a lot while the applied...

stress-strain diagram - brittle materials

Brittle Material Failure Under Tension

Brittle materials such as glass, cast iron, and stone fail with very little change in elongation. Their breaking strength and ultimate strength are nearly the same, and the strain at rupture is low. In these materials, failure is usually driven by normal stress, so the break surface is typically perpendicular to the applied load. Brittle materials also show little or no necking. Necking is the local narrowing of a material’s cross section under stress. Another important feature is that many...

true stress and true strain

Stress-Strain Curves Beyond Yield

Stress-strain curves beyond yield show how ductile materials behave after they start to deform permanently. Engineering stress is found by dividing the load by the original, undeformed cross-sectional area. It is a useful approximation, but it can lose accuracy when strain becomes large. True stress gives a more exact picture of the same specimen under load. It is calculated by dividing the applied load by the instantaneous cross-sectional area during deformation. As the specimen stretches,...

hooke's law

Stress-strain limits in materials explain how solids respond when force is applied. Stress is the applied force per area, and strain is the change in shape or size that results. In the elastic range, strain stays directly proportional to stress. The constant that connects them is called the modulus of elasticity, or Young's modulus. This linear behavior continues only up to the proportional limit. After that point, the stress-strain relationship becomes nonlinear. For ductile materials, this...

plastic behavior

Yielding and Strain-Hardening in Metals

Yielding and strain-hardening describe how a material changes when stress goes beyond the elastic range. Under elastic behavior, the stress disappears when the load is removed, and the material returns to its original shape. Once stress exceeds the yield point, yielding begins and permanent deformation, or plastic set, starts. The switch from elastic to plastic behavior depends on the peak stress and on how long the load stays in place before removal. A specimen that is loaded, unloaded, and...

fatigue

Fatigue Failure in Repeated Loading

Fatigue failure happens when materials rupture after repeated or fluctuating loads. The stress can be far below the material’s static breaking strength. Even ductile materials can fail in a brittle way under fatigue. This behavior matters in machines and structural parts that face repetitive or changing loads. One example is an unbalanced pump impeller that creates vibrations. Another is a thin steel rod or wire bent back and forth in the same spot until it breaks. The number of loading...

deformation of member under multiple loadings

deformation-of-member-under-multiple-loadings

Calculating Rod Stretch from Mixed Loads

Calculating rod stretch from mixed loads starts with breaking the rod into parts. This step is needed when the rod is made of different materials or has changes in cross-section. Each part has its own internal force, cross-sectional area, length, and modulus of elasticity. These values are used to find the deformation of the full rod. For a member with a variable cross-section, the strain is not constant. Instead, it changes with position along the rod. The deformation of a small element is...

statically indeterminate problem solving

Axial Rod Reactions with Redundant Support

Axial rod reactions with a redundant support are found by combining equilibrium with deformation. The structure here uses two cylindrical rods, one steel and one brass, joined at point B and held by rigid supports at points A and C. The goal is to determine the reactions at A and C and the deflection at B. This setup is statically indeterminate because the supports create more unknown reactions than the equilibrium equations can solve. Statics alone is not enough to find every internal force...

thermal strain

Thermal Expansion of a Free Rod

Thermal strain describes how a structure changes length when temperature changes. It is important in real-world design because structures do not always stay at one temperature. Temperature shifts can affect how they behave and how long they last. A simple example is a homogeneous rod with a uniform cross-section resting freely on a flat horizontal surface. When the rod is heated, it elongates. The amount of elongation depends on the temperature change and the rod’s original length. This...

temperature dependent deformation

Thermal Stress in a Composite Rod

A steel-and-brass composite rod can build stress when temperature changes while both ends are restrained. The rod is nonhomogeneous, so its two sections respond differently. To find the compressive load, the problem is treated as statically indeterminate, which means the force cannot be found from equilibrium alone. The analysis begins by disconnecting one support so the rod can expand or contract freely under the temperature change. An unknown force is then applied at the free end. That force...

poisson's ratio

Material Strain Under Axial Loading

Poisson's ratio describes how a material changes shape when it is pulled or compressed along one direction. It links the strain in the direction of the force to the strain that happens sideways. When a slender bar is loaded axially, it stretches along the load and contracts laterally. Poisson's ratio is defined as the negative ratio of lateral contraction to axial elongation. The negative sign is used because the two strains usually have opposite signs. This keeps the ratio positive and makes...

generalized hooke's law

Multiaxial Stress and Strain Relation

Multiaxial stress and strain describe how an isotropic material responds when forces act along more than one direction. A cube-shaped sample under normal stresses on the three coordinate axes can change into a rectangular parallelepiped. Even after this deformation, the sides remain equal, and normal strain appears along the coordinate axes. The strain components are found from the stress components by studying each stress effect one at a time. The separate effects are then combined using the...

bulk modulus

Volume Change Under Hydrostatic Pressure

Bulk modulus describes how much a material resists a uniform squeeze. It links a change in pressure to the relative change in volume. For high school students, it is easiest to think of it as a measure of how hard it is to compress a material evenly from all sides. The idea becomes clearer when an isotropic material element is treated as a cube with unit volume. When normal stresses act on the cube, it deforms into a rectangular parallelepiped and its volume changes. The difference between the...

shearing strain

Shear Modulus and Angular Change

Shearing strain is the angular change that happens in a cubic element when it is loaded by shearing stress. Under this stress, the cube can change into an oblique parallelepiped without creating normal strains. If the cube is acted on only by shearing stress, its shape can shift strongly into a rhomboid. The amount of shearing strain is considered positive when the angle between the axes becomes smaller. This change in angle shows the direct effect of shear on the material. The deformation can...

relation between poisson's ratio, modulus of elasticity and modulus of rigidity

relation-between-poisson-s-ratio-modulus-elasticity-modulus

Axial Load Effects on Shear Strain

Axial load effects on shear strain are shown by how a slender bar deforms under tension or compression. When the bar is loaded along its axis, it changes in both the axial direction and the transverse direction. A small cubic element inside the bar can turn into a rectangular parallelepiped or a rhombus, depending on how it is oriented. This change in shape creates shearing strain, which is the distortion caused when angles in a material change. Axial loading produces both normal strain and...

saint-venant's principle

Load Effects Away from the Ends

Saint-Venant's principle describes how stress changes in a structural member when a load is applied. It shows that the exact way a load is placed matters most near the point of application. Farther away from that point, the stress pattern becomes much less dependent on how the load was applied. A simple example uses a member with plates on both ends. When the loads are applied at the center of the plates, the plates move toward each other without rotating. The member shortens in length and...

stress concentrations

Stress at Holes and Fillets

Stress can become much higher near holes and abrupt changes in shape within a structural member. These discontinuities create localized stress that may exceed the average stress in the part. For flat bars, the stress distribution can be measured experimentally with a photoelastic method. This approach is used for bars with a circular hole or with changing widths joined by fillets. The results depend on geometric ratios, such as the hole radius to the smaller width for a circular hole. For...

residual stresses

Residual Stresses After Welding and Cooling

Residual stresses are stresses that remain in a structure after the original load or heat source is removed. They often form when different parts of a material undergo uneven plastic deformation, which means permanent shape change. A rod stretched past its yield point is one example. It will not return to its original length, and some stress stays inside even after the load is gone. These stresses can also develop during welding. Heat changes the material during the weld and can cause plastic...

key terms and concepts

Explore stress, strain, Young's modulus, and the proportional limit, plus how isotropic metals and anisotropic fiber composites respond to load.

Stress-Strain Limits in Materials | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Forces, Momentum And Motion

Elastic forces

Energy

Energy in springs

Tennessee Academic Standards

High School

Motion and Stability: Forces and Interactions

PHYS.PS2.5

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Kinematic Equations - I

When an object moves with constant acceleration, the velocity of the object changes at a constant rate throughout the motion. The kinematic equations of ...

Kinematic Equations - II

The second kinematic equation expresses the final position of an object in terms of its initial position, the distance traveled with the initial constant ...

Kinematic Equations - III

The first two kinematic equations have time as a variable, but the third kinematic equation is independent of time. This equation expresses final velocity ...

Kinematic Equations: Problem Solving

When analyzing one-dimensional motion with constant acceleration, the problem-solving strategy involves identifying the known quantities and choosing the ...

Free-falling Bodies: Introduction

All objects, neglecting air resistance, fall with the same acceleration towards the Earth&#39;s center due to the force exerted by the Earth&#39;s ...

Free-falling Bodies: Example

An object falling without any air resistance under the influence of gravitational force is said to be in free-fall. For free-falling bodies, the ...

velocity-and-position-by-graphical-method

Velocity and Position by Graphical Method

Velocity and position can be calculated from the known function of acceleration as a function of time. The total area under the acceleration-time graph ...

Velocity and Position by Integral Method

If acceleration as a function of time is known, then velocity and position functions can be derived using integral calculus. For constant acceleration, ...

Use models (graphs, equations, diagrams) to infer motion in one dimension.

PS.Phy.1.1

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Projectile Motion

An object thrown in the air follows a parabolic path under the influence of Earth&#39;s gravitational force. The motion of such an object is called ...

/files/media/science-education/science-education-thumbs/12634.jpg

Projectile Motion: Equations

Projectile motion is commonly observed in our day-to-day life. For example, a basketball thrown by a player, an arrow shot from a bow, and kids jumping ...

Projectile Motion: Example

The theory of projectile motion is very useful for players of several sports to improve their performance. For example, a javelin thrower needs to throw ...

principle-linear-impulse-momentum-for-single-particle-problem

Principle of Linear Impulse and Momentum for a Single Particle: Problem Solving

Consider a massless pulley system consisting of a wooden box and a cylinder of known masses. Determine the speed of the attached objects at a specific ...

Non-uniform Circular Motion

In&#160;uniform circular motion, the particle executing circular motion has a constant speed, and the circle is at a fixed radius. However, not all ...

Relative Velocity in One Dimension

The understanding of the concept of reference frames is essential to discuss relative motion in one or more dimensions. When we say that an object has a ...

Relative Velocity in Two Dimensions

Relative velocity is the velocity of an object as observed from a particular reference frame, or the velocity of one reference frame with respect to ...

Use models (graphs, equations, diagrams) to infer motion in two dimensions.

PS.Phy.1.2

Force

Forces affect every moment of our life. Our bodies are held to the Earth by force, and they are held together by the forces of charged particles. When we ...

Types of Forces

In most situations, forces can be grouped into two categories: contact forces and field forces.&#160; Contact forces occur as a result of direct physical ...

Drawing Free-body Diagrams: Rules

The first step in describing and analyzing most phenomena in physics involves the careful drawing of a free-body diagram. Free-body diagrams are useful in ...

Free Body Diagrams: Examples

Solving problems that involve forces is easy using free-body diagrams. A free-body diagram is a sketch showing all the external forces that are acting on ...

Use free body models to qualitatively and quantitatively analyze systems of forces in one dimension and two dimensions.

PS.Phy.2.1

Newton's First Law: Introduction

Motion draws our attention. Motion itself can be beautiful, causing us to marvel at the forces needed to create spectacular sights, such as that of a ...

Newton's First Law: Application

Experience suggests that an object at rest remains at rest if left alone, and that an object in motion tends to slow down and stop unless some effort is ...

Internal and External Forces

Newton&#39;s first law states that a net external force causes a change in motion. External forces act on an object or system, originating outside of the ...

Newton's Second Law

Newton&#39;s second law is closely related to his first law of motion. It mathematically gives the cause-and-effect relationship between force and changes ...

Mass and Weight

Mass and weight are often used interchangeably in everyday conversation. For example,&#160; medical records often show our weight in kilograms, but never ...

Weightlessness

When an object is dropped, it accelerates toward the center of the Earth. If the net external force on the object is its weight, it is said to be in free ...

Apparent Weight

True weight is the measure of the gravitational force acting on an object. However, if the object accelerates, its measured weight is different from its ...

/files/media/science-education/science-education-thumbs/14695.jpg

Newton's Third Law: Introduction

Whenever one body exerts a force on a second body, the first body experiences a force equal in magnitude and opposite in direction, to the force that it ...

Newton's Third Law: Examples

Newton&#39;s third law states that every action has an equal and opposite reaction. Consider a swimmer pushing off the side of a pool. They push against ...

first-law-particles-in-one-dimensional-equilibrium

First Law: Particles in One-dimensional Equilibrium

Newton&#39;s first law of motion states that a body at rest remains at rest, or if in motion, remains in motion at constant velocity, unless acted on by a ...

first-law-particles-in-two-dimensional-equilibrium

First Law: Particles in Two-dimensional Equilibrium

Recall that a particle in equilibrium is one for which the external forces are balanced. Static equilibrium involves objects at rest, and dynamic ...

Second Law: Motion under Same Force

Newton&#39;s laws can be applied to bodies at rest and bodies in motion. Newton&#39;s first law is applied to bodies in equilibrium, whereas the second ...

second-law-motion-under-same-acceleration

Second Law: Motion under Same Acceleration

Newton&#39;s second law of motion applies to bodies moving under the same acceleration. For example, when a baggage tractor pulls luggage carts, each cart ...

Carry out investigations to explain the interactions of forces on an object according to Newton's Laws of Motion.

PS.Phy.2.2

Analyze the motion of objects using time, distance, displacement, speed, velocity, and acceleration.

Stress-Strain Limits in Materials

Description

Transcript

Tags

More videos by Standards