Name: concrete materials and reinforcement
Uploaded: 2024-09-12T16:16:35.000Z
Duration: 1 min 20 s
Channel: JoVE

Le béton est un matériau structurel couramment utilisé dans la construction de bâtiments, de ponts, d’aérodromes, d’autoroutes, de barrages et de silos.
Le béton est produit en mélangeant des proportions spécifiques de matériaux cimentaires comme le ciment, des agrégats fins comme le sable et des agrégats grossiers comme le gravier avec de l’eau. Parfois, l’adjuvant est également mélangé pour modifier les caractéristiques du béton résultant.
Dans une matrice de béton frais, les vides des agrégats plus gros sont remplis par des agrégats plus petits, et les vides restants sont remplis de pâte ciment-eau, formant un revêtement sur les agrégats.
Ce mélange durcit avec le temps en une masse semblable à de la roche, qui est forte en compression et faible en tension. En conséquence, des armatures peuvent être introduites pour renforcer le béton.
La sélection des matériaux, le mélange, le transport, la mise en place, le compactage et le durcissement régissent les performances du béton.
Le béton frais doit être maniable et, une fois placé, les ingrédients ne doivent pas se séparer ou saigner de l’eau.
Généralement, le béton est produit sous forme de béton prêt à l’emploi, de sections de béton préfabriqué et d’unités de maçonnerie en béton.

Aucun conflit d’intérêts n’a été déclaré.

béton

Concrete

Le béton est un matériau de construction essentiel, largement utilisé dans le monde entier, principalement apprécié pour sa résistance, sa durabilité et sa polyvalence, qu'il offre à diverses conceptions structurelles. Le béton est généralement composé d'ingrédients tels que du ciment Portland, du gravier grossier, du sable fin et de l'eau. Le béton peut être mélangé à la main ou de manière industrielle dans des usines contrôlées par ordinateur. Le mélange est composé d'agrégats et d'une pâte à base d'eau et de ciment Portland. Cette pâte enrobe les agrégats et, par hydratation, une réaction chimique, elle durcit en une masse solide appelée béton. Bien que résistant à la compression, le béton manque de résistance à la traction et nécessite un renforcement en acier pour plus de résistance.

L'histoire du béton remonte à plus de 2 000 ans, les Romains étant les premiers à utiliser du béton fabriqué à partir de mortier de chaux et de cendres volcaniques, qu'ils utilisaient dans de nombreuses structures étanches. L'ère moderne du béton a commencé avec la redécouverte de son procédé de fabrication par Joseph Aspdin en 1824, qui a développé ce que l'on appelle aujourd'hui le ciment Portland. Au fil des siècles, la technologie du béton a évolué, avec le développement de différents types pour des utilisations spécifiques, notamment le béton prêt à l'emploi pour la construction générale, le béton préfabriqué pour une qualité et une durabilité contrôlées, et les éléments de maçonnerie en béton à des fins structurelles et esthétiques. Aujourd'hui, le béton préfabriqué reste fondamental pour la construction moderne, continuellement perfectionné par des normes d'ingénierie et des innovations.

Béton

Le béton est un matériau structurel couramment utilisé dans la construction de bâtiments, de ponts, d’aérodromes, d’autoroutes, de barrages et de silos.
Le béton est produit par ...

Education

Enseignement

JoVE Core

Civil Engineering

Génie civil

Unit 1

Unité 1

Introduction to Concrete

Introduction au béton

KEY TERMS AND CONCEPTS

TERMES ET CONCEPTS CLÉS

concrete materials and reinforcement

Concrete is a major construction material used in buildings, bridges, airfields, highways, dams, and silos. It is valued for strength, durability, and versatility in many structural designs. A concrete mix usually includes Portland cement, coarse gravel, fine sand, and water.

Concrete can be mixed by hand or made at industrial plants with computer control. The mix has aggregates and a paste made from water and Portland cement. This paste coats the aggregates. Through hydration, a chemical reaction, the mix hardens into a solid mass called concrete.

Concrete is strong under compression, which means it resists being squeezed. It is weaker under tension, which means it does not resist pulling forces well. For that reason, steel reinforcement is often added to give concrete extra strength.

Concrete has a long history that goes back more than 2,000 years. The Romans made early concrete from lime mortar and volcanic ash. They used it in many waterproof structures. Modern concrete began in 1824 when Joseph Aspdin rediscovered the process and developed Portland cement.

Over time, concrete technology has expanded to meet different needs. Ready-mix concrete is used for general construction. Pre-cast concrete is made under controlled conditions for quality and durability. Concrete masonry units are also used for structural and aesthetic purposes. Today, concrete remains a basic material in modern construction and continues to be improved through engineering standards and new methods.

Concrete Materials and Reinforcement

concrete

Concrete is a major construction material used in buildings, bridges, airfields, highways, dams, and silos. It is valued for strength, durability, and versatility in many structural designs. A concrete mix usually includes Portland cement, coarse gravel, fine sand, and water. Concrete can be mixed by hand or made at industrial plants with computer control. The mix has aggregates and a paste made from water and Portland cement. This paste coats the aggregates. Through hydration, a chemical...

portland cement

How Portland Cement Is Made

Portland cement is the main binding material in concrete. It is made from finely ground ingredients that include lime, iron, silica, and alumina. These materials give cement the properties it needs to hold concrete together. The raw ingredients come from several common natural sources. Lime is obtained mainly from limestone, marble, marl, seashells, and clays. Those same clays can also supply iron and alumina. Silica is sourced from sand, chalk, and bauxite. Making Portland cement starts by...

hydration of cement

Cement Setting and Strength Formation

Cement setting and strength formation begin when water is added to cement particles. The main reaction is called hydration. During hydration, the anhydrous cement compounds react with water and form new solids that help harden the material. Hydration can happen by two main paths: through-solution and topochemical. In through-solution, anhydrous compounds dissolve into their parts, hydrates form in the liquid, and then they come out of a supersaturated solution. In topochemical hydration,...

strength and heat of hydration

Cement Hydration Heat and Strength Gain

Cement hydration produces heat and builds strength at the same time. Hydration is an exothermic reaction, which means it releases heat as cement reacts with water. That heat of hydration is a key part of how cement develops strength. Most of the heat is released early in the process. About half is given off in the first three days, and about 75% is released in the first week. The rate of heat release also affects how much the temperature rises during hydration. Some cement compounds...

fineness of cement

How Cement Particle Size Changes Behavior

Cement particle size changes how cement behaves in concrete. Finer cement has more surface area, so hydration starts faster at the particle surface. This affects the rate of hardening and also influences workability, gypsum requirement, and long-term behavior. Cement fineness is usually described by its specific surface area. This is the total surface area of cement particles per unit mass, and it is often measured in square meters per kilogram. Several methods can be used to determine it,...

setting time of cement

Cement Initial and Final Set

Cement setting time describes how cement paste changes from a plastic state to a solid state. This change matters in construction because it sets the window for placing, compacting, and finishing concrete. The first stage is called the initial set. At that point, the paste becomes unworkable. The next stage is the final set. By then, the paste has solidified completely, and further handling can no longer change its shape. Cement strength is still very low at this stage because hydration of...

soundness of cement

Cement Expansion Tests for Soundness

Cement soundness is the ability of cement paste to keep its volume after it sets. If cement is unsound, it can expand later and damage a structure. This problem can come from free lime, magnesia, and calcium sulfate in the cement. Free lime hydrates very slowly. As it reacts, it can expand and cause unsoundness. It is also hard to detect because it intercrystallizes with other compounds in the cement structure. Magnesia can also react with water. It forms crystals that may disrupt the cement...

strength of cement

Cement Strength Tests and Standards

Cement strength is measured with standard tests that use mortar, not neat cement paste. Cement paste alone is hard to shape into specimens that give consistent and reliable results. For that reason, the test samples are usually made with cement and sand. For compressive strength, ASTM C 109-05 uses a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485. The mixture is cast into 2-inch cubes and cured in saturated lime water at 23°C until testing. This method measures how well the...

types of cement i

Portland Cement Grades and Uses

Portland cement comes in several grades with different properties and uses. Its chemical composition and hydration behavior help determine how it performs in concrete. These differences matter in general construction, fast repairs, large structures, and places where sulfate exposure is a concern. Type I, or Ordinary Portland Cement, is the common choice for general construction. It is used when special properties are not required. This type has moderate sulfate resistance and moderate heat of...

types of cement ii

Special Portland Cements for Durability

Special Portland cements are made for specific building needs, such as added durability, color, or lower cracking risk. One major example is Portland blast-furnace cement. It is made by blending Portland cement clinker with granulated blast-furnace slag, which makes up about 25 to 65 percent of the cement by weight. Portland blast-furnace cement sets at about the same rate and has about the same fineness as ordinary Portland cement, which is Type I cement. Its early strength is lower, but it...

pozzolans

Pozzolans in Stronger Concrete Mixes

Pozzolans are siliceous or aluminous materials used with Portland cement to improve concrete performance. They react with the calcium hydroxide formed during cement hydration. This reaction helps increase strength and durability. The usefulness of a pozzolan is measured by its pozzolanic activity. One common test is the strength activity index from ASTM C 618-93. It compares the compressive strength of cement mixtures made with and without pozzolan. Fly ash is a common artificial pozzolan. It...

key terms and concepts

Learn how concrete is made, why it is strong in compression, and how steel reinforcement, ready-mix, pre-cast concrete, and CMUs are used in construction.

Concrete Materials and Reinforcement | JoVE K12

JoVE Core Civil Engineering provides a foundational exploration of essential construction materials in civil engineering, focusing on bricks, stones, steel, wood, and concrete through easy-to-understand animated videos. This collection covers the properties, manufacturing processes, and practical applications of these materials. Additionally, the accompanied science-in-action videos demonstrate the research experiments performed in laboratories.

civil engineering

Concrete Materials and Reinforcement

Description

Transcript

Tags