Name: power triangle in ac circuits
Uploaded: 2024-07-08T13:19:51.000Z
Duration: 1 min 14 s
Channel: JoVE

Si consideri un carico collegato a una fonte CA. La tensione e le correnti attraverso questo carico possono essere rappresentate nel dominio della frequenza.
La potenza complessa è definita come la metà del prodotto della tensione e del complesso coniugato della corrente.
L'entità della potenza complessa è nota come potenza apparente.
Quando si esprime la potenza complessa in forma rettangolare, la parte reale rappresenta la potenza media, mentre la parte immaginaria rappresenta la potenza reattiva.
La potenza complessa può anche essere espressa in termini di impedenza, che è il rapporto tra tensione e corrente.
Separando le parti resistiva e di reattanza dell'impedenza e confrontandole con l'espressione di potenza complessa ottenuta si ottiene un'espressione che coinvolge l'impedenza.
La parte reale della potenza è l'unica potenza utile erogata al carico.
La potenza reattiva riflette lo scambio di energia tra la sorgente e il carico. È zero per i carichi resistivi, negativo per i capacitivi e positivo per i carichi induttivi.
La potenza complessa, reale e reattiva può essere visualizzata sotto forma di un triangolo, noto come triangolo di potenza.

potenza complessa

Gli ingegneri energetici hanno introdotto il concetto di potenza complessa per determinare l'effetto cumulativo dei carichi paralleli. Questa idea gioca un ruolo cruciale nell'analisi della potenza perché comprende tutti i dettagli relativi alla potenza consumata da un carico specifico.


La potenza complessa è definita come la moltiplicazione della tensione per il complesso coniugato della corrente. L'entità di questa potenza, nota come potenza apparente, viene misurata in volt-ampere (VA). In particolare, l'angolo della potenza complessa equivale all'angolo del fattore di potenza.


In termini di valori efficaci, la potenza complessa è rappresentata da


<img alt="Equation 1" src="/files/ftp_upload/15120/15120_Equation_1.svg" style="height: 18px;">

Può anche essere espressa in termini di impedenza di carico, come


<img alt="Equation 2" src="/files/ftp_upload/15120/15120_Equation_2.svg" style="height: 20px;">

La potenza complessa è il prodotto del fasore di tensione efficace e del complesso coniugato del fasore di corrente efficace. Essendo una quantità complessa, la sua parte reale è chiamata potenza reale P, e la sua parte immaginaria è chiamata potenza reattiva Q. L'introduzione della potenza complessa consente il recupero diretto delle potenze reali e reattive dal fasore di tensione e corrente, dimostrando come la potenza complessa incapsula tutte le informazioni di potenza pertinenti in un carico specifico.

La potenza reattiva rappresenta il trasferimento di energia tra la sorgente e il carico. Per i carichi resistivi è zero, per i carichi capacitivi è negativa e per i carichi induttivi è positiva.


È possibile visualizzare il potere complesso, reale e reattivo sotto forma di un triangolo, comunemente noto come triangolo della potenza. Questa visualizzazione è utile a comprendere questi concetti di potenza.

Potenza Complessa

Si consideri un carico collegato a una fonte CA. La tensione e le correnti attraverso questo carico possono essere rappresentate nel dominio della frequenza.
La potenza complessa è ...

Education

Didattica

JoVE Core

Electrical Engineering

Ingegneria elettrica

Unit 1

Unità 1

AC Steady State Power

Potenza in regime stazionario CA

KEY TERMS AND CONCEPTS

TERMINI E CONCETTI CHIAVE

Complex Power

power triangle in ac circuits

Power triangle and complex power help describe how an AC load uses energy. Engineers use complex power to capture the combined effect of parallel loads. It gives a full picture of the power consumed by a specific load.

Complex power is found by multiplying voltage by the complex conjugate of current. Using rms values, it is written with the rms voltage phasor and the complex conjugate of the rms current phasor. It can also be written in terms of load impedance.

The magnitude of complex power is called apparent power. Apparent power is measured in volt-amperes, or VA. The angle of complex power is the same as the power factor angle.

Because complex power is a complex number, its real part is real power P and its imaginary part is reactive power Q. Real and reactive power can be read directly from the voltage and current phasors. This shows how complex power stores all the important power information for a load.

Reactive power describes energy transfer between the source and the load. For resistive loads, reactive power is zero. For capacitive loads, it is negative, and for inductive loads, it is positive.

These power terms are often shown in a triangle called the power triangle. The triangle includes complex power, real power, and reactive power. This visual model makes the relationships between the power quantities easier to understand.

Power Triangle in AC Circuits

instantaneous power

AC Power and Phase Shift

Instantaneous power in an electrical circuit comes from the voltage across an element and the current through it. It is written as p(t) and follows the passive sign convention. For sinusoidal input, this product helps show how power changes at each moment. When instantaneous power is expanded, it has two parts. One part is constant and depends on the phase difference between voltage and current. The other part is a sinusoidal term that varies at twice the frequency of the voltage or current. <br...

average power

Power Consumption in AC Circuits

Power consumption in AC circuits is often described with average power. In practical electrical work, the changing value of instantaneous power is less useful than the average over a time period. Average power is found by integrating instantaneous power over that time and then dividing by the duration. The time-domain expression for average power comes from simplifying the equation for instantaneous power. In that form, one cosine term averages to zero over a complete cycle. The result does...

effective value of a periodic waveform

RMS Value for AC Power Measurement

The RMS value, or effective value, helps measure how much power a periodic voltage or current can deliver. It is the direct current, or DC, value that gives the same average power to a resistor as the periodic signal does. This idea is especially important in AC circuits. To find the effective value of current, calculate the root mean square, or RMS, current. First square the instantaneous current values over one period. Then find the mean of those squared values and take the square root. The...

complex power

Power triangle and complex power help describe how an AC load uses energy. Engineers use complex power to capture the combined effect of parallel loads. It gives a full picture of the power consumed by a specific load. Complex power is found by multiplying voltage by the complex conjugate of current. Using rms values, it is written with the rms voltage phasor and the complex conjugate of the rms current phasor. It can also be written in terms of load impedance. The magnitude of complex power...

conservation of ac power

AC Power in Series and Parallel Circuits

AC power in series and parallel circuits follows a power preservation rule. In AC circuits, the complex power, real power, and reactive power produced by the source are equal to the total complex, real, and reactive powers absorbed by the loads. When two load impedances are connected in parallel to an AC source V, the source power can be written as the sum of the complex powers delivered to loads Z1 and Z2. If those same loads are connected in series with the voltage source, the complex power...

power factor

Power Factor and AC Load Behavior

Power factor describes how voltage and current behave in an AC load. It is the ratio of average, or active, power to apparent power. The power factor angle is the phase difference between voltage and current, and the cosine of that angle gives the power factor. It also matches the angle of the load impedance. Power factor shows how much apparent power becomes real, or average, power. Its value ranges from zero to one. When a load is purely resistive, voltage and current are in phase. In that...

power factor correction

Reducing Reactive Power in AC Loads

Power factor correction helps AC systems use electrical power more efficiently. In a factory circuit, transmitted power includes apparent power, which is made of active power and reactive power. Power factor is the ratio of real power, measured in kW, to apparent power, measured in kVA. It shows how much of the supplied power becomes useful work. A low power factor often happens when an inductive load draws too much reactive power. This creates a lagging power factor. It can also cause large...

the power superposition principle

Power from Multiple AC Sources

Power from multiple AC sources is found by adding the effects of each source separately. In a circuit with two sinusoidal voltage sources, each source acts independently. The superposition principle says the total current is the sum of the currents produced by each source alone. If those currents are labeled i1 and i2, they combine to give the total current. Instantaneous power is the power at one moment in time. In this circuit, it equals the square of the instantaneous current times the...

the maximum power transfer theorem

Matching Load Impedance for Maximum Power

Maximum power transfer in an AC circuit depends on matching the load impedance to the Thevenin equivalent of the source network. The load draws current, and the circuit delivers power to that load. To analyze the current, the voltages, currents, network impedance, and load impedance are written in rectangular form. The average power delivered to the load comes from the square of the current multiplied by the load resistance. To find the condition for maximum power, the power is differentiated...

key terms and concepts

Learn how complex power, apparent power, real power, and reactive power are related in AC circuits, and how the power triangle helps explain them.

Power Triangle in AC Circuits | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

Power Triangle in AC Circuits

Description

Transcript

Tags