Name: diode current in forward bias
Uploaded: 2024-07-08T13:20:19.000Z
Duration: 1 min 20 s
Channel: JoVE

Un diodo è polarizzato in avanti quando la sua regione di tipo p è collegata al terminale positivo della tensione di alimentazione e la sua regione di tipo n è collegata al terminale negativo. 
La caratteristica corrente-tensione diretta mostra una corrente trascurabile per tensioni di polarizzazione inferiori a 0,7 volt, nota come tensione di inserimento. Tuttavia, poiché la tensione di polarizzazione supera leggermente 0,7 volt, la corrente nel diodo aumenta bruscamente.
Di conseguenza, i diodi completamente conduttori con diverse correnti nominali mostreranno la caduta di 0,7 volt a correnti diverse.
La relazione corrente-tensione del diodo comporta una corrente di saturazione che dipende dalla temperatura e dall'area della sezione trasversale.
La tensione termica, che coinvolge la costante di Boltzmann e l'entità della carica elettronica, è espressa in termini di temperatura.
Per una corrente diretta significativa, l'equazione del diodo si semplifica in una forma esponenziale ed è espressa logaritmicamente in termini di tensione termica.
Confrontando le correnti per due tensioni del diodo, l'equazione, utilizzando logaritmi in base 10, indica che una variazione di corrente di dieci volte corrisponde a una caduta di tensione di circa 60 millivolt attraverso il diodo.

diodo: polarizzazione diretta

Nei dispositivi a semiconduttore, i diodi svolgono un ruolo cruciale nel dirigere il flusso di corrente e il loro funzionamento è principalmente classificato in polarizzazione diretta e polarizzazione inversa. Si dice che un diodo è polarizzato direttamente quando la sua regione di tipo p, è collegata al terminale positivo di una batteria e la sua regione di tipo n è collegata al terminale negativo. Questa configurazione riduce la barriera di potenziale all'interno del diodo, consentendo alla corrente di fluire facilmente dalla regione di tipo p alla regione di tipo n.

Il comportamento di un diodo in polarizzazione diretta è governato dalle sue caratteristiche I-V che sono influenzate dal materiale, dalla temperatura e dalle dimensioni fisiche del diodo. Quando polarizzata direttamente, la corrente (ID) di un diodo può essere descritta dall'equazione del diodo:

<img alt="Equation 1" src="/files/ftp_upload/15713/15713_Equation_1.svg" style="height: 26px;">

dove IS è la corrente di saturazione, q è la carica dell'elettrone, VD è la tensione applicata ai capi del diodo, n è il coefficiente di emissione, k è la costante di Boltzmann e T è la temperatura di giunzione. La tensione termica VT (kT/q) misura l'energia richiesta per spostare i portatori di carica attraverso il diodo e il suo valore a temperatura ambiente è di circa 26 mV.

<img alt="Figure 1" src="/files/ftp_upload/15713/15713_Figure_1.svg" style="height: 200px;">

Il diodo mostra una corrente trascurabile per tensioni inferiori alla tensione di inserimento, tipicamente 0,7 V per i diodi al silicio. Nella polarizzazione diretta, per ogni decade di variazione della corrente diretta, la tensione del diodo cambia di circa 60 mV. La corrente di saturazione (IS) varia con la temperatura e con l'area della sezione trasversale del diodo e raddoppia per ogni aumento di 10°C. A causa della dipendenza dalla temperatura di Is e VT, la caduta di tensione di un diodo diminuisce di circa 2 mV per ogni aumento di 1°C della temperatura a corrente costante, una proprietà sfruttata nei circuiti di rilevamento della temperatura come i termometri elettronici. Comprendere queste proprietà è fondamentale per l'elettronica in cui i diodi sono componenti centrali, come raddrizzatori, mixer di segnale e regolatori di tensione.

Diodo: Polarizzazione Diretta

Un diodo è polarizzato in avanti quando la sua regione di tipo p è collegata al terminale positivo della tensione di alimentazione e la sua regione di tipo n è collegata ...

Education

Didattica

JoVE Core

Electrical Engineering

Ingegneria elettrica

Unit 1

Unità 1

Diodes

Diodi

KEY TERMS AND CONCEPTS

TERMINI E CONCETTI CHIAVE

Diode: Forward bias

diode current in forward bias

Diode current in forward bias depends on how the p-type and n-type regions are connected to a battery. When the p-type region is tied to the positive terminal and the n-type region to the negative terminal, the diode is forward-biased. This setup lowers the potential barrier inside the diode and lets current move easily from the p-type side to the n-type side.

The current-voltage behavior of a forward-biased diode is described by its I-V characteristics. These characteristics depend on the diode material, temperature, and physical size. The diode current can also be written using the diode equation, which includes saturation current, electron charge, applied diode voltage, emission coefficient, Boltzmann's constant, and junction temperature.

Thermal voltage, written as kT/q, shows the energy needed to move charge carriers across the diode. At room temperature, it is about 26 mV. A silicon diode also shows very little current below its cut-in voltage, which is typically 0.7 V.

In forward bias, the diode voltage changes by about 60 mV for every decade change in forward current. The saturation current changes with temperature and with the diode's cross-sectional area. It doubles for every 10°C increase. Because of the temperature effect on saturation current and thermal voltage, the diode voltage drop falls by about 2 mV for each 1°C rise in temperature at a constant current.

This temperature behavior is useful in circuits that measure heat, such as electronic thermometers. Diodes are also important in rectifiers, signal mixers, and voltage regulators. Understanding forward bias helps explain why diodes are key parts of many electronics.

Diode Current in Forward Bias

the ideal diode

Ideal Diode I-V Curve and Rectification

An ideal diode is a simple model of a semiconductor diode used to show how current moves through circuits. A diode has two terminals. The anode is positive, and the cathode is negative. In this model, current can flow only in one direction. When a positive voltage is applied to the anode relative to the cathode, the diode is forward-biased. In that state, it conducts current. When the cathode is at a higher potential than the anode, the diode is reverse-biased. It then blocks current and acts...

diode: forward bias

Diode current in forward bias depends on how the p-type and n-type regions are connected to a battery. When the p-type region is tied to the positive terminal and the n-type region to the negative terminal, the diode is forward-biased. This setup lowers the potential barrier inside the diode and lets current move easily from the p-type side to the n-type side. The current-voltage behavior of a forward-biased diode is described by its I-V characteristics. These characteristics depend on the...

diode: reverse bias

Diode Reverse Current and Breakdown

A diode in reverse bias blocks current flow and widens its depletion region. In this setup, the positive terminal of the power source connects to the n-type material, and the negative terminal connects to the p-type material. The reverse connection also raises the barrier potential, so current stays very small. The small reverse current is called leakage current. It comes mainly from minority charge carriers. At room temperature, once the reverse voltage is above the thermal voltage, the...

zener diodes

Zener Diode Voltage Regulation

Zener diodes are semiconductor devices used to hold voltage steady in reverse bias. In reverse breakdown, current flows into the cathode and makes it positive relative to the anode. This behavior is different from a conventional diode and is the reason Zener diodes are useful in voltage regulation. A Zener diode has a nearly vertical current-voltage, or I-V, curve above a threshold called the knee current. That shape lets it keep a fairly stable voltage over a wide range of currents.

modeling of diode forward characteristics

modeling-of-diode-forward-characteristics

Diode Forward Bias: I-V Curve and Models

Diode forward bias is analyzed with the current-voltage, or I-V, curve and two common circuit models. These models help describe how a diode behaves when current flows in the forward direction. They are useful for electronic circuit design and analysis. The exponential diode model is used when the source voltage rises above 0.5 volts. At that point, the diode current increases exponentially above the saturation current. The I-V curve shows this nonlinear response as the forward voltage...

small-signal diode model

Diode Bias and Small-Signal Response

Diode bias and small-signal response describe how a diode behaves when a steady DC voltage and a tiny changing signal act on the same circuit. The DC bias sets the diode’s operating point, or Q point. Around that point, the diode current and voltage follow an exponential I-V relationship. A small time-varying signal can be added on top of the DC bias to study how the diode responds to small changes. When the signal voltage is much smaller than the thermal voltage, the diode’s behavior can be...

modeling of diode reverse characteristics

modeling-of-diode-reverse-characteristics

Zener Diode Load-Line Modeling

Zener diode load-line modeling shows how a reverse-biased diode sets a steady voltage in a circuit. Zener diodes use reverse breakdown in a controlled way, so they can hold a fixed voltage across their terminals. This makes them useful for voltage regulation. When the reverse voltage rises above the Zener voltage, or VZ, the diode enters the breakdown region. In this region, the current-voltage, or I-V, curve becomes nearly vertical after the knee current, IZ, is reached. That means the...

half wave rectifier

Single-Diode AC to DC Conversion

Single-diode AC to DC conversion uses a half-wave rectifier to change alternating current into a unidirectional voltage. The circuit is simple. It uses one diode in series with a load resistor and an AC power source. The diode controls the current because it allows flow in only one direction. During the positive half-cycles of the AC input, the diode is forward-biased. When the input voltage is greater than the diode threshold, current flows and an output voltage appears across the load...

full wave rectifier

AC to DC Conversion with Full-Wave Rectifiers

A full-wave rectifier converts alternating current, or AC, into direct current, or DC. It is more efficient than a half-wave rectifier. The circuit usually uses a center-tapped transformer, two diodes, and a load resistor. The center-tapped transformer is the key part of the circuit. Its secondary winding is split into two equal voltages with opposite polarities. That split lets the rectifier use both halves of the AC input waveform. During the positive half-cycle of the AC signal, diode D1...

bridge rectifier

AC to DC Conversion with Bridge Diodes

A bridge rectifier converts alternating current (AC) into direct current (DC) using four diodes arranged in a bridge layout. It is used to turn both halves of the AC waveform into a single-direction output. That makes it an important part of many electronics circuits. During the positive half-cycle, diodes D1 and D2 conduct. Current then flows through the load resistor R. At the same time, D3 and D4 are reverse-biased, so they do not conduct. The action switches during the negative half-cycle.

clipper circuit

Dual Diode Wave Clipping

Dual diode wave clipping uses diodes and biasing batteries to reshape an AC signal. A clipper circuit is a wave-shaping device that changes waveform parts without changing the whole signal. It is commonly used in television and radar communication systems to improve waveform modulation in transmitters and receivers. A dual-clipper setup uses two ideal diodes, two biasing batteries, and a resistor connected in parallel. The circuit works by responding to the phase of the input AC signal. The...

clamper circuit

DC Restorer for Waveform Level Shifting

A clamper circuit, or DC restorer, shifts a waveform up or down by adding a DC level. It is a special form of rectifier circuit. In this setup, the output is taken across the diode instead of across the capacitor. The circuit works well with square wave inputs and other pulse signals. The diode direction lets the capacitor charge to the most negative peak of the input signal. After that, the diode stops conducting. The capacitor then holds that voltage at a steady value. As a result, the...

voltage doubler circuit

How a Voltage Doubler Raises AC Output

A voltage doubler circuit raises the output voltage by using a clamping section and a rectifier section. The clamping section includes a capacitor, C1, and a diode, D1. The rectifier section includes a second diode, D2, and a capacitor, C2. The circuit starts working when a sinusoidal input signal enters the clamping section. Under ideal conditions, this stage clamps the positive peaks at zero volts. It also lets the negative peak reach a magnitude that is twice the input amplitude. That...

schottky barrier diode

Fast Switching in Schottky Diodes

Schottky barrier diodes use a metal-semiconductor junction to control current flow. They are built by combining a metal layer with a moderately doped n-type semiconductor. This contact creates the Schottky barrier, which gives the diode its one-way current behavior. When the metal touches the semiconductor, charge transfer occurs. The Fermi levels of the two materials align, and a depletion region forms near the contact area. In an n-type semiconductor, this region contains uncompensated...

key terms and concepts

Learn how a forward-biased diode conducts current, how its voltage changes with current and temperature, and why these properties matter in circuits.

Diode Current in Forward Bias | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

Diode Current in Forward Bias

Description

Transcript

Tags