Name: disk method for rotated region volume
Uploaded: 2026-01-12T12:24:09.000Z
Duration: 1 min 29 s
Channel: JoVE

I volumi di oggetti dalla forma irregolare possono essere determinati con precisione utilizzando il concetto di solidi di rivoluzione. Ad esempio, consideriamo una funzione curva in un piano bidimensionale. Ruotando questa curva attorno all'asse x si genera una forma tridimensionale simmetrica nota come solido di rivoluzione. La linea attorno a cui ruota la regione è l'asse della rivoluzione.Quando la regione si trova direttamente contro l'asse, produce sezioni circolari solide. Per determinare il volume di tale solido, si può utilizzare il metodo del disco.Questo metodo divide il solido in sottili fette perpendicolari all'asse. Ogni fetta diventa un disco con una larghezza e un raggio piccoli pari alla distanza dall'asse alla curva.Il volume di ogni disco si ottiene moltiplicando la sua area per il suo spessore. Il volume totale del solido viene approssimato sommando i volumi di tutti i dischi circolari formati.Man mano che il numero di dischi aumenta e il loro spessore si avvicina a zero, la somma passa all'integrale definito dell'area della sezione trasversale nell'intervallo dato, ottenendo il volume esatto.La variabile di integrazione e l'espressione per il raggio dipendono dall'orientamento dell'asse.

volumi dei solidi di rotazione

Volumes of Solids of Revolution

I volumi di oggetti di forma irregolare possono essere determinati in modo sistematico mediante il concetto di solidi di rotazione. Questo approccio prende avvio da una regione definita da una curva nel piano bidimensionale. Quando tale regione viene ruotata attorno a una retta fissa, detta asse di rotazione, si genera un oggetto tridimensionale dotato di simmetria di rotazione. Oggetti di questo tipo compaiono frequentemente nella modellazione matematica, in fisica e nelle applicazioni ingegneristiche.
Quando la regione che viene ruotata &#xE8; a diretto contatto con l&#x2019;asse di rotazione, il solido risultante &#xE8; costituito da sezioni trasversali circolari prive di cavit&#xE0; interne. In questo caso, il metodo dei dischi offre una tecnica efficace per calcolare il volume. Il solido viene concettualmente suddiviso in un gran numero di fette molto sottili, ricavate con sezioni perpendicolari all&#x2019;asse di rotazione. Ogni fetta ha uno spessore ridotto e forma un disco il cui raggio &#xE8; determinato dalla distanza tra l&#x2019;asse e la curva di confine in quel punto.
Ogni disco rappresenta un solido geometrico semplice, il cui volume pu&#xF2; essere approssimato moltiplicando la sua area circolare per lo spessore. Sebbene un singolo disco fornisca soltanto un&#x2019;approssimazione di una porzione del solido, l&#x2019;insieme dei dischi costituisce una rappresentazione fedele dell&#x2019;intero oggetto. Sommando i volumi di tutti i dischi si ottiene un&#x2019;approssimazione del volume totale. E man mano che le fette diventano sempre pi&#xF9; sottili, tale approssimazione aumenta in precisione.
Nel caso limite, in cui lo spessore di ciascun disco tende a zero e il numero di fette tende all&#x2019;infinito, la somma dei volumi dei dischi si trasforma in un calcolo esatto mediante integrazione definita. L&#x2019;integrale accumula le aree delle sezioni trasversali lungo la lunghezza del solido, fornendo il volume esatto del solido di rotazione. La scelta della variabile di integrazione, cos&#xEC; come l&#x2019;espressione utilizzata per rappresentare il raggio del disco, dipende dal fatto che la rotazione avvenga attorno a un asse orizzontale o a un asse verticale.
Il metodo dei dischi &#xE8; uno strumento fondamentale del calcolo infinitesimale ed &#xE8; ampiamente applicato a problemi che coinvolgono forme solide lisce generate per rotazione. La sua semplicit&#xE0; concettuale e l&#x2019;interpretazione geometrica lo rendono particolarmente utile per l&#x2019;analisi di sistemi fisici e di componenti ingegneristici con simmetria di rotazione.

Volumi dei solidi di rotazione

I volumi di oggetti di forma irregolare possono essere determinati in modo sistematico mediante il concetto di solidi di rotazione. Questo approccio ...

Education

Didattica

JoVE Core

Calculus

Analisi matematica

Unit

Unità

Applications of Integration

Applicazioni dell'integrazione

KEY TERMS AND CONCEPTS

TERMINI E CONCETTI CHIAVE

disk method for rotated region volume

The disk method is used to find the volume of a solid formed by rotating a region around an axis. The region is first drawn in a two-dimensional plane. When that region spins around a fixed line, called the axis of revolution, it creates a three-dimensional shape with rotational symmetry. These shapes appear often in math models, physics, and engineering.

When the region touches the axis of revolution, the solid has no hollow space inside. Its cross-sections are circular, so the shape can be broken into many thin disks. Each disk is taken perpendicular to the axis of rotation. The radius of each disk comes from the distance between the axis and the curve at that point.

Each disk has a small thickness and a circular area. Its volume can be estimated by multiplying that area by the thickness. One disk gives only an approximation, but many disks together give a close model of the whole solid. As the slices become thinner and more numerous, the estimate becomes more accurate.

In the limit, this sum of disk volumes becomes an exact volume through definite integration. The integral adds the cross-sectional areas along the length of the solid. The variable of integration and the radius expression depend on whether the axis of rotation is horizontal or vertical. This method is a key idea in calculus for finding the volume of smooth, rotated shapes.

Disk Method for Rotated Region Volume

area between curves: integrating with respect to x

area-between-curves-integrating-with-respect-to-x

Vertical Slices for Area Between Curves

Area between curves can be found by using vertical slices and a definite integral. For two continuous functions on a closed interval from a to b, the region is bounded by their graphs on the sides and by the interval endpoints across the bottom and top edges of the setup. A first estimate comes from splitting the interval into many narrow vertical strips of equal width. Each strip is treated like a rectangle. Its height is the vertical difference between the two functions at a chosen point...

area between curves: integrating with respect to y

area-between-curves-integrating-with-respect-to-y

Horizontal Slices for Area Between Curves

Area between curves can be found with horizontal slices when both boundaries are written as functions of y. The left and right curves are continuous from y = c to y = d, and those lines set the vertical limits of the region. Because the curves depend on y, the area is best measured by moving across the shape with thin horizontal strips. The method uses a Riemann sum. The region is divided into many thin strips with the same height, delta y. For each strip, the width is the horizontal distance...

area between curves: problem solving

Piecewise Area Between Curves

Piecewise area between curves uses more than one integral to find the size of a region on a graph. In this example, the region is enclosed by a square root function, a reflected cube root function, and a linear function. The line intersects each of the other two curves, and those intersection points show where the boundary of the region changes. The area cannot be found with one setup over the full interval because the top and bottom curves are not the same everywhere. The region is split at...

calculation of volume of solids by integration

calculation-of-volume-of-solids-by-integration

Slicing Methods for Solid Volume

Slicing methods help find the volume of solids with changing cross-sections. A basic solid, like a rectangular box, is easy to measure because its base area stays the same along its height. Many real objects do not have that regular shape, so elementary geometry is not enough. The slicing method solves this by breaking a solid into many very thin slices. These slices are taken perpendicular to a chosen axis, often the x-axis. Each slice has a small thickness, written as delta x, and a...

volumes of solids of revolution

The disk method is used to find the volume of a solid formed by rotating a region around an axis. The region is first drawn in a two-dimensional plane. When that region spins around a fixed line, called the axis of revolution, it creates a three-dimensional shape with rotational symmetry. These shapes appear often in math models, physics, and engineering. When the region touches the axis of revolution, the solid has no hollow space inside. Its cross-sections are circular, so the shape can be...

finding volume using cross-sectional area

finding-volume-using-cross-sectional-area

Tetrahedron Volume from Triangle Slices

Tetrahedron volume can be found by adding the areas of triangular slices. This method uses cross-sectional area, which is the area of a flat slice taken through a 3D solid. It is useful when a solid changes shape in a regular way and a simple geometric formula is not available. A tetrahedron is a good example. It has a height h and an equilateral triangle base with side length a. The coordinate system places the origin at the top vertex, and the y-axis goes downward along the height to the...

problem solving: volume

Finding the Volume of a Jet Fuel Tank

The volume of a jet fuel tank can be found with solids of revolution. The tank is modeled by rotating a two-dimensional region around the x-axis. This creates a three-dimensional shape that is symmetric about the axis of rotation. The region runs from 0 to 2 meters, so the tank’s shape can be measured along that length. Because the boundary curve touches the axis, the disk method works well here. The disk method breaks the solid into many very thin circular slices that are perpendicular to the...

average value of a function

Estimating Function Behavior with Average Value

The average value of a function gives one number that summarizes how a quantity changes over a closed interval. It can also be viewed as the height of a rectangle whose area matches the net area under the curve. That net area includes both positive and negative parts of the function, so the result reflects the function’s overall behavior. A greenhouse temperature over a 24-hour period is a practical example of this idea. The temperature may rise and fall throughout the day, but it is still...

key terms and concepts

Learn how the disk method finds the volume of a solid of revolution by slicing a rotated region into thin disks and using definite integration.

Disk Method for Rotated Region Volume | JoVE K12

The JoVE Core Calculus collection provides a comprehensive visual guide to the entire calculus sequence, seamlessly connecting mathematical theory to real-world applications in physics and economics. Through dynamic animated lessons, the course transitions smoothly from foundational single-variable concepts to advanced multivariable topics. Students will explore everything from standard differentiation and integration to spatial vectors, multi-dimensional derivatives, and complex vector fields. By breaking down abstract coordinate systems, infinite series, and spatial motion, this structured approach builds the robust analytical skills and advanced mastery essential for STEM success.

calculus

Disk Method for Rotated Region Volume

Description

Transcript

Tags