Name: finding a tangent plane from parametric curves
Uploaded: 2026-06-08T09:39:03.545Z
Duration: 1 min 22 s
Channel: JoVE

Consider a paraboloid surface where r represents the position vector of any point on the surface. Using x and y as parameters, the surface can be described parametrically.A tangent plane is a flat surface that touches this curved surface at a single unique point. Consequently, the tangent plane contains the tangent vectors to any curved paths along the surface that pass through this point.The partial derivative rx gives the tangent vector in the x direction, and the partial derivative ry gives the tangent vector in the y direction.Evaluating these at point A gives the tangent vectors in the x and y directions contained in the tangent plane.Their cross product gives a normal vector n perpendicular to the tangent plane.For any point P in the tangent plane, the vector v from A to P lies in the plane and is therefore perpendicular to the plane&#x2019;s normal vector n.As a result, the dot product of the vector n and v is zero. Expanding this dot product and simplifying gives the final equation of the tangent plane at point A to the given surface.

tangent planes to a parametric surface

A tangent plane provides a linear approximation to a curved surface at a specific point, capturing the local behavior of the surface. It can be understood as the plane that just touches the surface at that point and is defined by the tangent directions of curves lying on the surface. These tangent directions arise naturally when the surface is described parametrically, allowing systematic construction of the plane.For a surface expressed in parametric form, the position of any point is determined by two parameters. At a fixed point on the surface, varying each parameter independently traces curves along the surface. The partial derivatives with respect to these parameters produce tangent vectors that lie along these curves. One vector corresponds to variation in the first parameter, while the other corresponds to variation in the second parameter. Evaluating these vectors at the point of interest provides two independent directions that span the tangent plane.The cross product of the two tangent vectors produces a normal vector perpendicular to the surface at the given point. This normal vector is essential for defining the orientation of the tangent plane. Any point lying on the plane can be connected to the point of tangency by a vector that remains entirely within the plane. Because the normal vector is perpendicular to the plane, this connecting vector must be orthogonal to the normal direction.The defining property of the tangent plane is that any vector within it forms a right angle with the normal vector. This orthogonality condition provides a concise way to characterize the plane. By expressing the relationship between a general point on the plane and the point of tangency, and enforcing perpendicularity to the normal vector, the complete description of the tangent plane is obtained.

Tangent Planes to a Parametric Surface

https://cloudfront.jove.com/files/ftp_upload/40705/40705_article_thumb_40705.jpeg

Education

Didattica

JoVE Core

Calculus

Analisi matematica

Unit

Unità

Vector Calculus and Theorems

Calcolo Vettoriale e Teoremi

KEY TERMS AND CONCEPTS

TERMINI E CONCETTI CHIAVE

Piani tangenti a una superficie parametrica

finding a tangent plane from parametric curves

A tangent plane gives a linear approximation to a curved surface at one point. It is the plane that just touches the surface there. For a parametric surface, the tangent plane comes from the directions of curves that lie on the surface.

A parametric surface uses two parameters to locate each point. If one parameter changes while the other stays fixed, a curve appears on the surface. The partial derivative with respect to each parameter gives a tangent vector along one of these curves. At the point of interest, these two tangent vectors provide two independent directions that span the tangent plane.

The cross product of the two tangent vectors gives a normal vector. A normal vector is perpendicular to the surface at that point. It is also needed to set the orientation of the tangent plane. Any point in the plane can be connected to the point of tangency by a vector that stays inside the plane.

Because that connecting vector lies in the plane, it must be perpendicular to the normal vector. This orthogonality property is the key test for the tangent plane. By writing the relationship between a general point on the plane and the point of tangency, then requiring the vector to be perpendicular to the normal direction, the tangent plane can be fully described.

Finding a Tangent Plane from Parametric Curves

finding-a-tangent-plane-from-parametric-curves

introduction to vector fields

Vector Fields in Everyday Motion

Vector fields describe motion and force across space with both direction and size. They are used to model wind flow, ocean currents, magnetic forces, and fluid motion. In weather maps, wind can change from place to place, with both speed and direction varying across a region. To show this kind of change on a flat map, arrows are drawn at selected points. Each arrow points in the local direction of motion, and its length shows the strength of the field. A vector field in two dimensions is often...

gradient fields

Gradient Vectors and Level Curves

A gradient field shows how a scalar field changes across space. A scalar field gives one number at each point, such as temperature, pressure, or electric potential. The gradient field turns that information into a vector field that shows the direction of the fastest increase and the rate of change in that direction. For a scalar field f(x, y), the gradient is written as ∇f = . In three dimensions, for f(x, y, z), it is ∇f = . Each component is a partial derivative, which measures how the...

line integrals in the plane

Arc Length Formulas for Line Integrals

Line integrals in the plane let us add up quantities along a curve, such as mass, work, or surface area. A curve C in the plane is usually written in parametric form as x = x(t) and y = y(t), with t moving over an interval [a, b]. This single-variable form makes it easier to study both the shape of the curve and the quantity spread along it. For a scalar function f(x, y), a line integral along C is defined from a Riemann sum. The curve is split into small pieces with length Δs. On each piece,...

line integrals in space

Calculating Work Along Curved Paths

Line integrals in space are used to measure accumulation along a curved path in three dimensions. The path can be like a thin coiled spring, and it is described by a position vector r. That vector gives the x, y, and z coordinates in terms of one parameter t, which is often time or an angle. As t changes, r traces a smooth curve through space. For a scalar-valued function, the line integral with respect to arc length uses the magnitude of r'(t). Arc length is the distance measured along the...

applications of line integrals

Line Integrals in Work and Induction

Line integrals help measure work along a curved path and explain electromagnetic induction in a loop. In physics, they add up small contributions along a path when the force or electric field changes from point to point. For a particle moving on a curve, the work done by a force is written as W = ∫C F · dr. Here, F is the force and dr is a small displacement along the path. The dot product keeps only the part of the force that points along the motion. The same idea appears in electromagnetism...

the fundamental theorem for line integrals

the-fundamental-theorem-for-line-integrals

Path Independence in Line Integrals

Line integrals measure how a vector field adds up along a curve between two points. They compare the field’s direction and strength with the direction of motion along the path. In some cases, this calculation becomes much easier when the vector field comes from a potential function. A vector field F in two or three dimensions is called a gradient field when there is a scalar function g such that F = ∇g. In that case, g is the potential function. The gradient points in the direction of the...

conservative vector fields

Testing Whether a Vector Field Is Conservative

A conservative vector field is a force field where the work done between two points depends only on the start and end points. Gravity is a simple example. For a ball in Earth’s gravitational field, the work depends on the change in height. That stays true even if the ball moves straight up or along a curved path. A vector field is conservative when it can be written as the gradient of a scalar potential function, f. In two dimensions, this is written as F(x,y) = = ∇f. The components come from...

green’s theorem

Green’s Theorem: Curl and Boundary Circulation

Green’s Theorem links a line integral around a closed curve to a double integral over the region inside it. It is used with a vector field F(x, y) = ⟨P(x, y), Q(x, y)⟩, where P and Q have continuous first partial derivatives on an open set that contains the region. The curve C must be simple, closed, piecewise smooth, and positively oriented. Positive orientation means the curve is traced counterclockwise, so the region R stays on the left side as you move along the boundary. Green’s Theorem...

extended versions of green’s theorem

Green’s Theorem on Regions with Holes

Green’s Theorem can be used on regions with holes when the boundary is oriented correctly. The theorem links the circulation of a vector field around a closed curve to the behavior of the field across the region inside that curve. It also replaces a line integral around the boundary with a double integral over the interior. This makes it useful in plane geometry, fluid flow, and vector calculus. The setup becomes more interesting for a region that is not a single simple shape. A region can be...

curl and divergence of vector fields

Reading Flow Patterns with Curl and Divergence

Curl and divergence describe two basic ways a vector field can behave. A vector field gives each point in space both a size and a direction. A river current is one example. Floating leaves can show where the water swirls and where it spreads out or gathers in. Curl measures how much a field tends to rotate around a point. If leaves move in a small whirlpool, the flow has rotational behavior, and the curl is nonzero. In three-dimensional vector notation, curl is found with the cross product of...

vector forms of green’s theorem

Using Curl to Measure Circulation

Green’s Theorem links circulation around a closed curve to rotation inside the region. In a fluid example, such as a pond with pollutants, tracing the water along an irregular shoreline can be difficult. The theorem offers a faster way to connect what happens at the boundary with what happens throughout the water. The motion of the fluid is described by a vector field. A vector field assigns a vector to each point in the region. Each vector shows both the speed and direction of the flow at...

parametric surfaces

Grid Curves on Parametric Surfaces

Parametric surfaces use a vector-valued function to describe points in three-dimensional space. The surface is written as r(u, v) = x(u, v)i + y(u, v)j + z(u, v)k, where u and v are parameters in a chosen domain D in the uv-plane. As the parameters change, the position vector traces a continuous surface in space. This method is useful for shapes that are hard to describe with explicit or implicit equations. It gives a clear way to model complex geometry. That makes it especially helpful in...

A tangent plane gives a linear approximation to a curved surface at one point. It is the plane that just touches the surface there. For a parametric surface, the tangent plane comes from the directions of curves that lie on the surface. A parametric surface uses two parameters to locate each point. If one parameter changes while the other stays fixed, a curve appears on the surface. The partial derivative with respect to each parameter gives a tangent vector along one of these curves. At the...

surface integrals

Surface Area of Parametric Surfaces

Surface area of parametric surfaces can be estimated by breaking a curved surface into small patches. A curved roof is one example, since its true surface area is usually larger than its flat projection. To find the painting cost, the curved area must be calculated first. If the roof is described by a vector-valued function r(u, v), then each point in a parameter domain D matches a point on the surface S. This makes it possible to study the curved surface using a two-dimensional region. The...

oriented surfaces

Surface Normals and Orientation

Surface normals and orientation help show which side of a surface is chosen as positive. A surface is orientable if one unit normal vector can be chosen consistently at every point. A thin soap film stretched across a wire loop is a familiar example. The film separates the air on one side from the air on the other, so one side can be labeled positive and the other negative. Once that choice is made, a unit normal vector points perpendicular to the surface at each point. The vector changes...

surface integrals of vector fields: flux

Calculating Mass Flow Across a Surface

Calculating mass flow across a surface is an important tool in meteorology and atmospheric modeling. It helps scientists measure how much air moves into or out of a region over a given time. This idea uses mass flux across a boundary surface to describe a complex air system in a simpler way. First, an imaginary surface S is drawn around the region of interest. A unit normal vector n is used to orient the surface. This vector shows the direction perpendicular to each point on the surface.

stokes’ theorem and its applications

Stokes’ Theorem for Curl and Circulation

Stokes’ Theorem connects circulation around a closed curve with curl across the surface it surrounds. Circulation is the total tendency of a vector field to move along a boundary. Curl is the local turning, or rotational effect, of the field at each point on the surface. For a smooth three-dimensional surface with an oriented boundary curve, the theorem gives one relationship between edge motion and internal rotation. The line integral around the closed curve equals the surface integral of the...

divergence theorem in 3d space

Flux Through Closed Surfaces

Flux through a closed surface in vector calculus measures how much of a vector field passes outward across the boundary. When the surface in three-dimensional space has an irregular shape, calculating that outward flow directly can be difficult. The Divergence Theorem gives a faster way to connect the surface flux to what is happening inside the enclosed region. The theorem states that the outward flux of a vector field through a closed surface equals the triple integral of the divergence over...

vector calculus: problem solving

Curl of Gravitational Fields

Vector calculus helps describe gravitational fields that change across space. A useful example is the gravitational interaction between the Earth and a satellite. The Earth can be placed at the origin, and the satellite can be located at a point in three-dimensional space. The gravitational force on the satellite has components along the coordinate directions, and those components together form a vector field around the Earth. A key question in vector calculus is whether a force field causes...

key terms and concepts

Learn how partial derivatives, tangent vectors, and a normal vector work together to define the tangent plane of a parametric surface at a point.

Finding a Tangent Plane from Parametric Curves | JoVE K12

The JoVE Core Calculus collection provides a comprehensive visual guide to the entire calculus sequence, seamlessly connecting mathematical theory to real-world applications in physics and economics. Through dynamic animated lessons, the course transitions smoothly from foundational single-variable concepts to advanced multivariable topics. Students will explore everything from standard differentiation and integration to spatial vectors, multi-dimensional derivatives, and complex vector fields. By breaking down abstract coordinate systems, infinite series, and spatial motion, this structured approach builds the robust analytical skills and advanced mastery essential for STEM success.

calculus

Finding a Tangent Plane from Parametric Curves

Description

Transcript

Tags