Name: e1 elimination: carbocation stability and rates
Uploaded: 2023-04-30T18:28:36.000Z
Duration: 2 min 46 s
Channel: JoVE

E1メカニズムを介したハロゲン化アルキルの脱離反応は、対応するSN1と同様に2つのステップで発生します。
両方の反応の最初のステップは、ハロゲン化物脱離基が失われてカルボカチオン中間体を形成するゆっくりとした律速ステップです。
E1反応の2番目のステップは、アルケンを形成する弱い塩基によるベータ水素の抽象化を伴います。対照的に、S N1反応は置換生成物をもたらす。
E1のメカニズムを裏付ける証拠は、E1反応が単分子であり、一次速度論に従うことを示す速度論的研究から得られています。つまり、反応速度は基質の濃度にのみ依存します。
重水素同位体研究はさらなる証拠を提供します。tert-ブチルクロリドの脱ハロゲン化水素化水素化反応の場合、非重水素化アナログと重水素化アナログの速度定数の比k H / kDは1.1です。
速度定数はほぼ同じであるため、これは炭素-水素結合が律速ステップではなく、提案されたメカニズムと一致する第2ステップで切断されることを示唆しています。
E1脱離反応に影響を与える要因には、カルボカチオンの安定性、脱離基の性質、溶媒の種類などがあります。
E1反応では、律速ステップはカルボカチオン中間体の形成を伴います。電子供与性アルキル基は、炭素-水素シグマ電子を正に帯電した炭素の空のp軌道に非局在化することにより、正電荷を安定化できます。
この安定化相互作用は、超抱合と呼ばれ、アルキル基の数とともに増加します。そのため、E1反応は第三級ハロゲン化アルキルで最速です。
しかし、第一級カルボカチオンは、1,2-水素化物シフトを受けて第二級カルボカチオンを形成したり、1,2-アルキルシフトを起こしてより安定した第三級カルボカチオンを得ることもできます。
炭素-ハロゲン結合は律速ステップで切断されるため、E1反応はさらに脱離基の品質に依存します。臭化物や塩化物と比較して、ヨウ化物は弱い共役塩基であるため、よりよく脱離基が得られます。
最後に、エタノールのような極性プロトン性溶媒は、律速ステップで形成されるカルボカチオンとハロゲン化物イオンを安定化させ、それによってE1反応を促進します。

<ol>
	<li>Brown, W.H., & Iverson, B.L., & Anslyn, V.E., & Foote S.C. (2014).有機化学。オハイオ州メイソン:Cengage Learning、369-376。</li>
	<li>Solomons, G., & Fryhle, C. & Snyder, S. (2015).有機化学。ニュージャージー州ニュージャージー州:ワイリー、275-281。</li>
	<li>Loudon, M., & Parise, J. (2016).有機化学。ニューヨーク州ニューヨーク:マクミラン出版社、405-513。</li>
	<li>クライン、D.(2017)。有機化学。ニュージャージー州ニュージャージー州:ワイリー、289-308。</li>
	<li>Clayden, J., & Greeves, N., & Warren, S. (2012).有機化学。オックスフォード:オックスフォード大学出版局、383-404。</li>
</ol>

e1 反応: 反応速度論とメカニズム

E1 Reaction: Kinetics and Mechanism

ここでは、E2 反応機構とは対照的に、脱離基の律速損失と弱塩基によるベータ水素の引き抜きという 2 つのステップを持つ E1 反応機構の側面を詳しく掘り下げます。 通常、E1 メカニズムの実験的証明は、速度論的研究または同位体研究によって行われます。 前者は一次反応速度論、つまり反応が基質濃度のみに依存することを示していますが、後者は第 2 段階でのみ水素が引き抜かれることを示しています。

E1 反応に影響を与える要因:

E1 脱離反応に影響を与える 3 つの重要な要素は、(a) カルボカチオンの安定性、(b) 脱離基の性質、および (c) 溶媒の種類です。 これに関連して、カルボカチオンの安定化につながる超共役のメカニズムが実証されます。 これは、カルボカチオンが形成される律速段階の鍵となり、置換ハロゲン化アルキルの反応速度に影響します。 興味深い帰結は、一級カルボカチオンの 1,2-ヒドリド シフトにより二級カルボカチオンが形成されること、または 1,2-アルキル シフトによりより安定な三級カルボカチオンが得られることです。 その後、炭素 - ハロゲン結合の切断が律速段階となるため、E1 反応は主に、弱い共役塩基として脱離するハロゲン化物基の性質によって影響を受けます。 最後に、プロトン性溶媒の極性は、律速段階で中間体のカルボカチオン/ハロゲン化物の安定化に重要な役割を果たすため、解明されます。

第三ハロゲン化物: SN1 対 E1

この段階では、SN1 反応と E1 反応を比較することが重要です。これらの反応はどちらも共通の中間体の形成を介して進行し、その結果、反応性に影響を与える要因に同様に反応するからです。 通常、生成物の形成が SN1 経路で進むか E1 経路で進むかに影響を与えることは困難です。どちらの場合でも、カルボカチオンから起こる活性化の自由エネルギーは非常に小さいからです。 温度が低い場合、SN1 は E1 に比べて単分子反応に有利なことがよくあります。 ただし、一般に、第 3 級ハロゲン化物はすぐに脱離してしまうため、合成経路では置換反応は好まれません。 反応条件の温度が上昇すると、メカニズムが代わりに E1 を優先するように変化します。 暗黙のルールとして、このような三次基質からの脱離生成物が必要な場合、競合する E1 対 SN1 機構に対して E2 機構を促進するために強塩基が使用されます。

E1 反応: 反応速度論とメカニズム

ここでは、E2反応メカニズムとは対照的に、E1反応メカニズムの2つのステップがある側面を掘り下げます。

Education

JoVE Core

Organic Chemistry

有機化学

Unit 1

ユニット1

Nucleophilic Substitution and Elimination Reactions of Alkyl Halides

ハロゲン化アルキルの親核置換反応および脱離反応

nucleophilic-substitution-and-elimination-reactions-of-alkyl-halides

KEY TERMS AND CONCEPTS

主要用語と概念

e1 elimination: carbocation stability and rates

E1 elimination depends on carbocation stability and reaction rate. It follows a two-step path. The first step is the rate-limiting loss of the leaving group. The second step is the abstraction of the beta hydrogen by a weak base.

Experimental support for the E1 mechanism comes from kinetic studies and isotope studies. Kinetic studies show first-order kinetics, which means the rate depends only on substrate concentration. Isotope studies show that hydrogen is removed only in the second step.

Three main factors affect E1 elimination reactions. These are carbocation stability, the nature of the leaving group, and the solvent type. Hyperconjugation helps stabilize carbocations, so it is important during the rate-limiting step when the carbocation forms. In substituted alkyl halides, this stability affects how fast the reaction occurs.

Carbocations can also rearrange to form more stable intermediates. A 1,2-hydride shift can change a primary carbocation into a secondary carbocation. A 1,2-alkyl shift can give a more stable tertiary carbocation. Since carbon-halogen bond breaking is the slow step, E1 reactions also depend on the leaving halide group, which acts as a weak conjugate base. Protic solvents matter too, because their polarity helps stabilize the carbocation and halide during the rate-limiting step.

Tertiary halides often show a competition between SN1 and E1 pathways. Both reactions form the same intermediate, so they respond similarly to the same reactivity factors. At lower temperatures, SN1 is often favored in unimolecular reactions. At higher temperatures, E1 becomes more likely. When an elimination product is wanted from a tertiary substrate, a strong base is used to push the reaction toward E2 instead of the competing E1 and SN1 routes.

E1 Elimination: Carbocation Stability and Rates

e1-elimination-carbocation-stability-and-rates

alkyl halides

Alkyl Halides: Structure and Reactivity

Alkyl halides are halogen-substituted alkanes. In these compounds, one or more hydrogen atoms in an alkane is replaced by a halogen atom such as fluorine, chlorine, bromine, or iodine. The carbon bonded to the halogen is sp3-hybridized and has a tetrahedral shape. Not every carbon-halogen compound is an alkyl halide. If the halogen is attached to an sp2-hybridized carbon in a carbon-carbon double bond, the compound is a vinyl halide. If the halogen is attached to an sp2-hybridized carbon in an...

nucleophilic substitution reactions

SN1 and SN2 in Organic Substitution

Nucleophilic substitution reactions replace one group in a molecule with another. In these reactions, a nucleophile, which is a Lewis base, reacts with an electrophile, which is a Lewis acid. The nucleophile takes the place of a halogen atom bonded to carbon and releases a stable ion called the leaving group. This reaction pattern is closely related to Lewis acid-base chemistry. The electron-rich species acts as the nucleophile. The electron-deficient species acts as the electrophile. A key...

nucleophiles

Nucleophilic Strength in Substitution Reactions

Nucleophiles are electron-pair donors that take part in substitution reactions. The word comes from Greek and means nucleus-loving. Because they donate electrons, nucleophiles are also Lewis bases. Many nucleophiles are negatively charged species, such as hydroxide, chloride, and hydrosulfide. Neutral molecules can also act as nucleophiles when they have lone pairs of electrons. Examples include ammonia, amines, water, and alcohols. Some molecules without a lone pair can still behave as...

electrophiles

Electrophile Reactivity in Organic Reactions

Electrophile reactivity in organic reactions depends on how a species attracts electrons. Electrophiles are electron-poor and are key partners in nucleophilic substitution reactions. Their charge and orbital structure help explain why they react the way they do. Electrophiles can be positive or neutral species. A positive electrophile such as a proton reacts because it has a vacant, low-energy 1s orbital. Other positive electrophiles, such as carbocations, are reactive because they have an...

leaving groups

How Leaving Groups Affect Substitution

Leaving groups affect how nucleophilic substitution reactions happen. In this type of reaction, a nucleophile replaces a functional group on a substrate. The group that leaves is called the leaving group, and it departs when the bond breaks by heterolytic cleavage, taking both electrons with it. A good leaving group is usually a stable weak base. It can leave as an anion or as a neutral molecule. The easier it is for the leaving group to leave, the more it can influence the reaction rate. <br...

carbocations

Carbocation Structure and Stability

Carbocations are reactive carbon species formed during some nucleophilic substitution and elimination reactions. They are electron-deficient intermediates, with the central carbon holding only six electrons and three bonded atoms. Because they are short-lived and highly reactive, they play an important role in many organic reaction pathways. The central carbon in a carbocation is sp2 hybridized and has a trigonal planar shape. It also contains an empty p orbital that sits perpendicular to the...

sn2 reaction: kinetics

SN2 Rate Law and Reaction Mechanism

SN2 reaction kinetics links reaction rate to the concentration of reactants. In a chemical reaction, kinetic studies measure how fast reactants disappear or products appear under fixed conditions such as temperature, pressure, and solvent. These studies help chemists find the rate law, which can give clues about the species involved in the rate-determining step and the reaction mechanism. The rate of a reaction is found experimentally. Scientists withdraw small samples, called aliquots, at...

sn2 reaction: mechanism

SN2 Backside Attack and Inversion

SN2 reactions happen in one step and end with inversion of configuration. The nucleophile and the substrate both take part in the rate-determining step, and no intermediate forms. The substrate contains a polarized carbon-halide bond. The more electronegative halogen pulls the electron cloud toward itself. That leaves the carbon atom electrophilic, or electron-poor, with a partial positive charge. The halide has a partial negative charge. The electrophilic carbon attracts the nucleophile,...

sn2 reaction: transition state

SN2 Reaction: Reactivity and Steric Effects

An SN2 reaction of an alkyl halide happens in one step. The nucleophile forms a bond with the electrophilic carbon while the halide leaves at the same time. No intermediate forms during this process. As the nucleophile approaches with its lone pairs, the leaving group moves away with the electron pair that was bonded to carbon. The transition state is shown with dotted partial bonds and square brackets. This state is very unstable, so it quickly changes into the more favored product state. <br...

sn2 reaction: stereochemistry

SN2 Inversion of Configuration

SN2 reactions cause inversion of configuration at the carbon being substituted. The nucleophile attacks from the back side, while the leaving group departs at the same time. This happens through a transition state, where the carbon changes from tetrahedral to trigonal bipyramidal and then back to tetrahedral. The change in shape helps explain the product stereochemistry. If the substrate is achiral at the alpha-carbon, the inversion is not seen. When the alpha-carbon is chiral, the reversal is...

sn1 reaction: kinetics

SN1 Reaction Rate and Unimolecular Step

SN1 reaction rate depends on the substrate, not the nucleophile. This pattern was identified by Sir Christopher Ingold and Edward D. Hughes while they studied nucleophilic substitution reactions of tertiary alkyl halides. A tertiary alkyl halide can still undergo substitution even when the nucleophile is weak. In their kinetic studies, the rate of product formation stayed the same when the nucleophile concentration changed, as long as the substrate concentration remained constant. That means...

sn1 reaction: mechanism

SN1 Reaction Steps and Carbocation Formation

The SN1 reaction follows a step-by-step pathway that begins with carbocation formation. In a polar protic solvent, a tertiary haloalkane can ionize so that only the substrate takes part in the rate-determining step, which is the slow step. First, the haloalkane undergoes heterolytic cleavage to form a carbocation intermediate and a halide ion. This bond break is highly endothermic and has a large activation energy. The polar protic solvent helps stabilize the ions by solvation, and that makes...

sn1 reaction: stereochemistry

SN1 Pathway and Product Chirality

SN1 reactions can change the chirality of a product because the reaction goes through a carbocation intermediate. First, the bond between the electrophilic carbon and the leaving group ionizes. Then the nucleophile attacks the carbocation. The carbocation formed in an SN1 reaction is sp2 hybridized and has a trigonal planar shape. Its three substituents lie in the same plane, which creates a plane of symmetry. That makes the carbocation achiral, so the nucleophile can approach from either side...

predicting products: sn1 vs. sn2

SN1 and SN2 Reaction Factors

Nucleophilic substitution of alkyl halides can follow an SN1 or SN2 pathway. In an SN2 reaction, the nucleophile attacks as the leaving group leaves at the same time. In an SN1 reaction, the substrate first splits to form a carbocation, which is a positively charged intermediate. The structure of the alkyl halide helps decide which mechanism is more likely. As alkyl substitution increases, steric hindrance also increases, which makes backside attack harder for SN2. More substituted alkyl...

elimination reactions

E2 vs E1 in Alkyl Halide Elimination

Elimination reactions of alkyl halides form alkenes by removing groups from adjacent carbons. A base can act on the substrate instead of causing substitution. It deprotonates the neighboring carbon, and the reaction creates at least one pi bond. The carbon bonded to the halogen is the alpha carbon, and the adjacent carbon is the beta carbon. These are also called beta elimination or 1,2-elimination reactions. Strong bases help drive this process. Common examples include hydroxides, alkoxides,...

e2 reaction: kinetics and mechanism

E2 Elimination: Rate, Base, and Solvent

E2 elimination is a concerted reaction of alkyl halides that forms an alkene. In this mechanism, the base removes a beta hydrogen as the halide leaves from the alpha carbon. The two bonds change at the same time, so the products are formed in one step. The rate-limiting transition state has partially broken carbon-hydrogen and carbon-halogen bonds. It also has a partially formed pi bond between the alpha and beta carbons. Because the beta hydrogen and the halide are eliminated together, the...

e2 reaction: stereochemistry and regiochemistry

e2-reaction-stereochemistry-and-regiochemistry

E2 Elimination: Major and Minor Products

E2 elimination reactions of alkyl halides can form one or more alkenes, and the product mix depends on regiochemistry and stereochemistry. Regiochemistry controls where the double bond appears. Stereochemistry controls the shape of the alkene that forms. When a substrate has two different beta hydrogens, a strong base can remove either one. That can give two regioisomeric alkenes. The more substituted alkene is the major product and is called the Zaitsev product. The less substituted alkene is...

e1 reaction: kinetics and mechanism

E1 elimination depends on carbocation stability and reaction rate. It follows a two-step path. The first step is the rate-limiting loss of the leaving group. The second step is the abstraction of the beta hydrogen by a weak base. Experimental support for the E1 mechanism comes from kinetic studies and isotope studies. Kinetic studies show first-order kinetics, which means the rate depends only on substrate concentration. Isotope studies show that hydrogen is removed only in the second step. <br...

e1 reaction: stereochemistry and regiochemistry

e1-reaction-stereochemistry-and-regiochemistry

E1 Elimination: Zaitsev Product and Carbocation

E1 elimination often gives the most substituted alkene, called the Zaitsev product. In the example, water acts as a weak base and favors elimination over substitution, so two alkene products can form. The Zaitsev alkene is usually more stable than the Hofmann product because it has more alkyl groups attached to the double bond. The lower-energy pathway also helps explain why the Zaitsev product is favored. Its transition state has lower energy, so this product is both thermodynamically stable...

predicting products: substitution vs. elimination

predicting-products-substitution-vs-elimination

Choosing Products in Substitution and Elimination

Substitution and beta-elimination compete when a nucleophile reacts with an alkyl halide. The major product depends on the substrate, the nucleophile, the temperature, and the solvent. Because more than one pathway can happen at once, a reaction often gives a product mixture. The structure of the alkyl halide helps predict which mechanism is more likely. Methyl halides and 1° halides usually favor bimolecular reactions, especially SN2. SN1 and E1 are disfavored for 1° halides because the 1°...

key terms and concepts

Explore how E1 elimination works, including carbocation stability, leaving groups, protic solvents, isotope studies, and why temperature affects SN1 versus E1.

E1 Elimination: Carbocation Stability and Rates | JoVE K12

organic chemistry

JoVE Core 有機化学では、立体化学、反応、メカニズムの基本概念を、簡潔でわかりやすいアニメーション ビデオ レッスンを使用して説明します。さらに、科学者の実際のビデオでは、世界中の今日の研究室で行われている古典的および独自の研究実験における関連概念の適用を示しています。

E1 Elimination: Carbocation Stability and Rates

Description

Transcript

Tags