Name: e2 vs e1 in alkyl halide elimination
Uploaded: 2023-04-30T18:28:36.000Z
Duration: 2 min 25 s
Channel: JoVE

알킬 할라이드가 뉴클레오필과 반응할 때, 뉴클레오필은 대체 생성물을 제공하기 위해 할로겐을 대체하거나 제거 반응을 통해 알케인을 형성하기 위해 인접한 수소를 추상화할 수 있다.
제거 반응에서, 뉴클레오필은 양성자에게 전자의 쌍을 기증하여 루이스 기지로 기능합니다. 제거 반응을 촉진하는 데 사용되는 일반적인 기지 중 일부는 수산화 나트륨과 같은 수산화, 칼륨 테트와 같은 알칸산화물 - 그러나 산화물, 또는 에탄올과 같은 알코올을 포함한다.
제거 반응은 전형적으로 적어도 하나의 π 결합을 형성하기 위하여 기판에서 작은 분자 단편의 손실을 관련시킵니다. 알킬 할라이드에서 제거 반응은 수소 원자 1개와 할로겐 원자 1개를 잃어서, 따라서 이름 탈수화로 진행됩니다.
탈보그룹에 결합된 탄소는 α 탄소이고 인접한 탄소의 수소는 β 수소이기 때문에, 이러한 반응은 종종 β 제거 또는 1,2제거 반응이라고 합니다.
대부분의 제거 반응은 E2 또는 E1 메커니즘을 통해 발생합니다.
E2 반응의 경우, 나트륨 에산화수소와 같은 강한 염기가 사용됩니다. 공동 메커니즘은 β 탄소의 분해에 의해 시작되며, α β 위치 사이의 π 결합의 형성으로 이어지는 할라이드 떠나는 그룹의 출발에 의해 시작됩니다.
대조적으로, E1 반응은 두 단계로 진행됩니다. 첫 번째는 카보케이션 중간체를 형성하기 위해 떠나는 그룹의 출발과 π 결합을 형성하기 위해 기지에 의한 환하를 포함한다.
알킬 할리데에는 두 가지 β 탄체가 함유되어 있으며, 제거 반응은 둘 이상의 알케네를 생성할 수 있습니다. 여기서, 더 대체 알케네는 가장 안정적이며 자이체프 제품이라고 하며, 덜 대체된 알케네는 호프만 제품이라고 합니다. 따라서, 제거 반응은 regio선택적이라고합니다.
또한, 제거 반응은 시스 -이소마를 통해 트랜스알케인의 형성을 선호, 그들에게 고정 입체 선택적 만들기.

<ol>
	<li>Brown, W.H., & Iverson, B.L., & Anslyn, V.E., & Foote S.C. (2014). 유기 화학. 오하이오주 메이슨: Cengage Learning, 366쪽.</li>
	<li>Solomons, G., & Fryhle, C. & Snyder, S. (2015). 유기 화학. 뉴저지, 뉴저지: 와일리, 299.</li>
	<li>Loudon, M., & Parise, J. (2016). 유기 화학. 뉴욕, NY: Macmillan Publishers, 412쪽.</li>
	<li>클라인, D. (2017). 유기 화학. 뉴저지, 뉴저지 : 와일리, 271.</li>
	<li>Clayden, J., & Greeves, N., & Warren, S. (2012). 유기 화학. 옥스포드 : Oxford University Press, 382.</li>
</ol>

제거 반응

Elimination Reactions

친핵체는 할로겐화 알킬과 반응하여 할로겐을 대체하여 치환 생성물을 만들어 낼 수 있습니다. 또는 알켄을 형성하기 위해 이웃 탄소의 탈양성자화에 의해 제거 생성물을 제공하는 염기 역할을 할 수도 있습니다. 제거 반응에서 기질은 적어도 하나의 π 결합을 형성하는 인접한 탄소로부터 두 개의 그룹을 잃습니다. 할로겐에 결합된 탄소를 α 탄소라고 하고 인접한 탄소를 β 탄소라고 합니다. 따라서 이러한 반응을 β 제거 또는 1,2-제거 반응이라고 합니다.

친핵체는 양성자에게 전자쌍을 제공함으로써 루이스 염기의 역할을 합니다. 제거 반응을 촉진하는 데 사용되는 일반적인 염기에는 수산화물(OH−), 알콕시드(OR−) 및 아미드(NH2−)가 포함됩니다. 강염기가 있는 경우, 알킬 할라이드는 β 탄소에서 양성자를 잃고 α 탄소에서 할로겐을 잃어 두 탄소 원자 사이에 π 결합이 형성됩니다.

제거 반응의 메커니즘

제거 반응은 일반적으로 E2 또는 E1 메커니즘을 통해 발생합니다. E2 메커니즘은 단일 공동 단계로 발생합니다. 염기에 의한 β 수소의 추출은 α-탄소-할로겐 결합의 절단을 동반합니다. 따라서 E2 반응은 하나의 전이 상태를 통해 진행됩니다.

E1 반응은 두 단계로 진행됩니다. 먼저, 알킬 할라이드는 이온화되어 탄소양이온 중간체와 할라이드 이온을 형성합니다. 다음으로, 염기에 의한 탄수화물 양이온의 탈양성자화로 인해 π 결합이 생성됩니다. 따라서 E1 반응에서는 탄소양이온 중간체가 하나의 전이 상태를 통해 형성되고, 탈양성자화 단계에서는 두 번째 전이 상태가 존재합니다.

지역 및 입체 선택성

알킬 할라이드가 두 개의 서로 다른 β 탄소를 가질 때 제거 반응은 하나 이상의 알켄을 생성할 수 있습니다. 이러한 경우 자이체브 생성물로 알려진 더 치환된(그리고 가장 안정적인) 알켄이 일반적으로 관찰됩니다. 그러나 어떤 경우에는 덜 치환된 알켄(호프만 생성물)이 얻어집니다. 염기의 선택은 어떤 위치선택적 생성물이 형성되는지 결정하는 데 중요한 역할을 합니다. 제거 반응은 또한 시스-이성질체보다 트랜스-알켄의 형성을 유리하게 하여 이를 입체선택적으로 만듭니다.

친핵체는 할로겐화 알킬과 반응하여 할로겐을 치환하여 치환 생성물을 제공 할 수 있습니다. 또는 그것은 제공하는 기초로 기능 할 수 있습니다 ...

Education

교육

JoVE Core

Organic Chemistry

유기 화학

Unit 1

제1단원

Nucleophilic Substitution and Elimination Reactions of Alkyl Halides

알킬 할라이드의 친핵성 치환 및 제거 반응

nucleophilic-substitution-and-elimination-reactions-of-alkyl-halides

KEY TERMS AND CONCEPTS

주요 용어 및 개념

e2 vs e1 in alkyl halide elimination

Elimination reactions of alkyl halides form alkenes by removing groups from adjacent carbons. A base can act on the substrate instead of causing substitution. It deprotonates the neighboring carbon, and the reaction creates at least one pi bond. The carbon bonded to the halogen is the alpha carbon, and the adjacent carbon is the beta carbon. These are also called beta elimination or 1,2-elimination reactions.

Strong bases help drive this process. Common examples include hydroxides, alkoxides, and amides. The base donates an electron pair to a proton, so it behaves as a Lewis base. In the presence of a strong base, the alkyl halide loses a proton from the beta carbon and the halogen from the alpha carbon. This lets a pi bond form between the two carbon atoms.

Elimination reactions often follow either the E2 or E1 mechanism. The E2 pathway is a single concerted step. The base removes the beta hydrogen at the same time that the alpha carbon-halogen bond breaks. This means E2 has one transition state.

The E1 pathway happens in two steps. First, the alkyl halide ionizes to form a carbocation intermediate and a halide ion. Then the base removes a proton from the carbocation, which forms the pi bond. In E1 reactions, the first step has one transition state, and the deprotonation step has a second transition state.

When an alkyl halide has two different beta carbons, more than one alkene can form. The more substituted and usually more stable alkene is called the Zaitsev product. In some cases, the less substituted Hofmann product forms instead, and the base helps decide which product is favored. Elimination reactions also tend to give trans-alkenes over cis isomers, so they are stereoselective.

E2 vs E1 in Alkyl Halide Elimination

alkyl halides

Alkyl Halides: Structure and Reactivity

Alkyl halides are halogen-substituted alkanes. In these compounds, one or more hydrogen atoms in an alkane is replaced by a halogen atom such as fluorine, chlorine, bromine, or iodine. The carbon bonded to the halogen is sp3-hybridized and has a tetrahedral shape. Not every carbon-halogen compound is an alkyl halide. If the halogen is attached to an sp2-hybridized carbon in a carbon-carbon double bond, the compound is a vinyl halide. If the halogen is attached to an sp2-hybridized carbon in an...

nucleophilic substitution reactions

SN1 and SN2 in Organic Substitution

Nucleophilic substitution reactions replace one group in a molecule with another. In these reactions, a nucleophile, which is a Lewis base, reacts with an electrophile, which is a Lewis acid. The nucleophile takes the place of a halogen atom bonded to carbon and releases a stable ion called the leaving group. This reaction pattern is closely related to Lewis acid-base chemistry. The electron-rich species acts as the nucleophile. The electron-deficient species acts as the electrophile. A key...

nucleophiles

Nucleophilic Strength in Substitution Reactions

Nucleophiles are electron-pair donors that take part in substitution reactions. The word comes from Greek and means nucleus-loving. Because they donate electrons, nucleophiles are also Lewis bases. Many nucleophiles are negatively charged species, such as hydroxide, chloride, and hydrosulfide. Neutral molecules can also act as nucleophiles when they have lone pairs of electrons. Examples include ammonia, amines, water, and alcohols. Some molecules without a lone pair can still behave as...

electrophiles

Electrophile Reactivity in Organic Reactions

Electrophile reactivity in organic reactions depends on how a species attracts electrons. Electrophiles are electron-poor and are key partners in nucleophilic substitution reactions. Their charge and orbital structure help explain why they react the way they do. Electrophiles can be positive or neutral species. A positive electrophile such as a proton reacts because it has a vacant, low-energy 1s orbital. Other positive electrophiles, such as carbocations, are reactive because they have an...

leaving groups

How Leaving Groups Affect Substitution

Leaving groups affect how nucleophilic substitution reactions happen. In this type of reaction, a nucleophile replaces a functional group on a substrate. The group that leaves is called the leaving group, and it departs when the bond breaks by heterolytic cleavage, taking both electrons with it. A good leaving group is usually a stable weak base. It can leave as an anion or as a neutral molecule. The easier it is for the leaving group to leave, the more it can influence the reaction rate. <br...

carbocations

Carbocation Structure and Stability

Carbocations are reactive carbon species formed during some nucleophilic substitution and elimination reactions. They are electron-deficient intermediates, with the central carbon holding only six electrons and three bonded atoms. Because they are short-lived and highly reactive, they play an important role in many organic reaction pathways. The central carbon in a carbocation is sp2 hybridized and has a trigonal planar shape. It also contains an empty p orbital that sits perpendicular to the...

sn2 reaction: kinetics

SN2 Rate Law and Reaction Mechanism

SN2 reaction kinetics links reaction rate to the concentration of reactants. In a chemical reaction, kinetic studies measure how fast reactants disappear or products appear under fixed conditions such as temperature, pressure, and solvent. These studies help chemists find the rate law, which can give clues about the species involved in the rate-determining step and the reaction mechanism. The rate of a reaction is found experimentally. Scientists withdraw small samples, called aliquots, at...

sn2 reaction: mechanism

SN2 Backside Attack and Inversion

SN2 reactions happen in one step and end with inversion of configuration. The nucleophile and the substrate both take part in the rate-determining step, and no intermediate forms. The substrate contains a polarized carbon-halide bond. The more electronegative halogen pulls the electron cloud toward itself. That leaves the carbon atom electrophilic, or electron-poor, with a partial positive charge. The halide has a partial negative charge. The electrophilic carbon attracts the nucleophile,...

sn2 reaction: transition state

SN2 Reaction: Reactivity and Steric Effects

An SN2 reaction of an alkyl halide happens in one step. The nucleophile forms a bond with the electrophilic carbon while the halide leaves at the same time. No intermediate forms during this process. As the nucleophile approaches with its lone pairs, the leaving group moves away with the electron pair that was bonded to carbon. The transition state is shown with dotted partial bonds and square brackets. This state is very unstable, so it quickly changes into the more favored product state. <br...

sn2 reaction: stereochemistry

SN2 Inversion of Configuration

SN2 reactions cause inversion of configuration at the carbon being substituted. The nucleophile attacks from the back side, while the leaving group departs at the same time. This happens through a transition state, where the carbon changes from tetrahedral to trigonal bipyramidal and then back to tetrahedral. The change in shape helps explain the product stereochemistry. If the substrate is achiral at the alpha-carbon, the inversion is not seen. When the alpha-carbon is chiral, the reversal is...

sn1 reaction: kinetics

SN1 Reaction Rate and Unimolecular Step

SN1 reaction rate depends on the substrate, not the nucleophile. This pattern was identified by Sir Christopher Ingold and Edward D. Hughes while they studied nucleophilic substitution reactions of tertiary alkyl halides. A tertiary alkyl halide can still undergo substitution even when the nucleophile is weak. In their kinetic studies, the rate of product formation stayed the same when the nucleophile concentration changed, as long as the substrate concentration remained constant. That means...

sn1 reaction: mechanism

SN1 Reaction Steps and Carbocation Formation

The SN1 reaction follows a step-by-step pathway that begins with carbocation formation. In a polar protic solvent, a tertiary haloalkane can ionize so that only the substrate takes part in the rate-determining step, which is the slow step. First, the haloalkane undergoes heterolytic cleavage to form a carbocation intermediate and a halide ion. This bond break is highly endothermic and has a large activation energy. The polar protic solvent helps stabilize the ions by solvation, and that makes...

sn1 reaction: stereochemistry

SN1 Pathway and Product Chirality

SN1 reactions can change the chirality of a product because the reaction goes through a carbocation intermediate. First, the bond between the electrophilic carbon and the leaving group ionizes. Then the nucleophile attacks the carbocation. The carbocation formed in an SN1 reaction is sp2 hybridized and has a trigonal planar shape. Its three substituents lie in the same plane, which creates a plane of symmetry. That makes the carbocation achiral, so the nucleophile can approach from either side...

predicting products: sn1 vs. sn2

SN1 and SN2 Reaction Factors

Nucleophilic substitution of alkyl halides can follow an SN1 or SN2 pathway. In an SN2 reaction, the nucleophile attacks as the leaving group leaves at the same time. In an SN1 reaction, the substrate first splits to form a carbocation, which is a positively charged intermediate. The structure of the alkyl halide helps decide which mechanism is more likely. As alkyl substitution increases, steric hindrance also increases, which makes backside attack harder for SN2. More substituted alkyl...

elimination reactions

Elimination reactions of alkyl halides form alkenes by removing groups from adjacent carbons. A base can act on the substrate instead of causing substitution. It deprotonates the neighboring carbon, and the reaction creates at least one pi bond. The carbon bonded to the halogen is the alpha carbon, and the adjacent carbon is the beta carbon. These are also called beta elimination or 1,2-elimination reactions. Strong bases help drive this process. Common examples include hydroxides, alkoxides,...

e2 reaction: kinetics and mechanism

E2 Elimination: Rate, Base, and Solvent

E2 elimination is a concerted reaction of alkyl halides that forms an alkene. In this mechanism, the base removes a beta hydrogen as the halide leaves from the alpha carbon. The two bonds change at the same time, so the products are formed in one step. The rate-limiting transition state has partially broken carbon-hydrogen and carbon-halogen bonds. It also has a partially formed pi bond between the alpha and beta carbons. Because the beta hydrogen and the halide are eliminated together, the...

e2 reaction: stereochemistry and regiochemistry

e2-reaction-stereochemistry-and-regiochemistry

E2 Elimination: Major and Minor Products

E2 elimination reactions of alkyl halides can form one or more alkenes, and the product mix depends on regiochemistry and stereochemistry. Regiochemistry controls where the double bond appears. Stereochemistry controls the shape of the alkene that forms. When a substrate has two different beta hydrogens, a strong base can remove either one. That can give two regioisomeric alkenes. The more substituted alkene is the major product and is called the Zaitsev product. The less substituted alkene is...

e1 reaction: kinetics and mechanism

E1 Elimination: Carbocation Stability and Rates

E1 elimination depends on carbocation stability and reaction rate. It follows a two-step path. The first step is the rate-limiting loss of the leaving group. The second step is the abstraction of the beta hydrogen by a weak base. Experimental support for the E1 mechanism comes from kinetic studies and isotope studies. Kinetic studies show first-order kinetics, which means the rate depends only on substrate concentration. Isotope studies show that hydrogen is removed only in the second step. <br...

e1 reaction: stereochemistry and regiochemistry

e1-reaction-stereochemistry-and-regiochemistry

E1 Elimination: Zaitsev Product and Carbocation

E1 elimination often gives the most substituted alkene, called the Zaitsev product. In the example, water acts as a weak base and favors elimination over substitution, so two alkene products can form. The Zaitsev alkene is usually more stable than the Hofmann product because it has more alkyl groups attached to the double bond. The lower-energy pathway also helps explain why the Zaitsev product is favored. Its transition state has lower energy, so this product is both thermodynamically stable...

predicting products: substitution vs. elimination

predicting-products-substitution-vs-elimination

Choosing Products in Substitution and Elimination

Substitution and beta-elimination compete when a nucleophile reacts with an alkyl halide. The major product depends on the substrate, the nucleophile, the temperature, and the solvent. Because more than one pathway can happen at once, a reaction often gives a product mixture. The structure of the alkyl halide helps predict which mechanism is more likely. Methyl halides and 1° halides usually favor bimolecular reactions, especially SN2. SN1 and E1 are disfavored for 1° halides because the 1°...

key terms and concepts

Explore how alkyl halides form alkenes through E2 and E1 elimination, including beta hydrogen removal, Zaitsev and Hofmann products, and trans selectivity.

E2 vs E1 in Alkyl Halide Elimination | JoVE K12

organic chemistry

JoVE Core Organic Chemistry explains basic concepts of stereochemistry, reactions, and mechanisms using concise and easy-to-understand animated video lessons. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

E2 vs E1 in Alkyl Halide Elimination

Description

Transcript

Tags