Name: position change and instant velocity
Uploaded: 2023-04-30T10:51:36.000Z
Duration: 1 min 12 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Physical Science

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.PSc.4.1

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

평균 속도는 해당 변위 동안의 시간 간격에 대한 변위의 비율로 제공됩니다. 2차원 공간에서 변위 벡터 Δr은 위치 변화를 나타냅니다.
주어진 순간의 속도를 고려하면 경과 시간은 0에 가깝습니다. 이제 평균 속도의 한계는 순간 속도에 가까워지고 시간에 대한 위치 벡터의 도함수와 같습니다.
어느 지점에서든 순간 속도 벡터의 방향은 항상 해당 지점에서 경로에 접하는 선을 따라 있습니다.
2차원 공간에서 속도의 구성 요소는 좌표 x와 y의 시간 도함수입니다. 따라서 순시 속도 벡터는 두 단위 벡터를 포함하는 합입니다.
3차원 모션을 설명할 때는 z축도 포함되며, 속도 벡터는 3개의 단위 벡터를 사용하여 표현됩니다.
순간 속도 벡터에서 크기는 물체의 속도를 나타냅니다.

평균 및 순간 속도 벡터

운동학에서 다른 물리량을 계산하려면 시간 변수를 도입해야 합니다. 시간 변수를 사용하면 물체가 움직이는 동안 물체의 위치(위치)를 알 수 있을 뿐만 아니라 물체가 얼마나 빨리 움직이는지도 알 수 있습니다. 물체가 움직이는 속도는 시간에 따라 위치가 변하는 비율로 나타납니다. 각 직위마다 특정 시간이 지정됩니다. 각 순간의 움직임의 세부 사항이 중요하지 않은 경우 속도는 일반적으로 평균 속도 v로 표시됩니다. 이 속도 벡터는 단순히 두 지점 사이의 총 변위를 두 지점 사이를 이동하는 데 걸린 시간(경과 시간이라고도 함)으로 나눈 값입니다.

그러나 현실 세계의 물체는 공간과 시간을 통해 연속적으로 움직이기 때문에 단일 지점에서의 물체의 속도는 중요한 매개변수입니다. 물체가 경로를 따라 어느 곳에서나 얼마나 빨리 움직이는지를 알려주는 양은 순간 속도로 알려져 있으며, 종종 간단히 속도라고도 합니다. 이는 두 지점 사이의 시간(따라서 변위)이 0에 가까워지는 한계 내에서 경로의 두 지점 사이의 평균 속도입니다. 평균 속도와 마찬가지로 순간 속도도 시간당 길이 차원의 벡터입니다.

이 텍스트는 <a href="https://openstax.org/books/university-physics-volume-1/pages/4-1-displacement-and-velocity-에서 수정되었습니다. 벡터">Openstax, 대학 물리학 1권, 섹션 4.2: 가속 벡터.</a>

운동학에서 다른 물리량을 계산하려면 시간 변수를 도입해야 합니다. 시간 변수를 사용하면 객체가 어디에 있는지 설명 할 수있을뿐만 아니라 ...

Education

교육

JoVE Core

Physics

물리학

Unit 1

제1단원

Motion in Two or Three Dimensions

2차원 또는 3차원 운동

KEY TERMS AND CONCEPTS

주요 용어 및 개념

position change and instant velocity

Position change and instant velocity are key ideas in kinematics. To describe motion, time must be included. Time tells us where an object is and how fast it is moving.

The speed of an object comes from how its position changes with time. Each position is tied to a specific time. When the details of motion at each instant are not important, the rate is given as average velocity. Average velocity is a vector. It equals the total displacement between two points divided by the elapsed time.

Real objects move continuously through space and time. Because of that, velocity at a single point along the path is also important. This is called instantaneous velocity, and it is often just called velocity. It is the average velocity between two points in the limit where the time interval, and therefore the displacement, approaches zero. Like average velocity, instantaneous velocity is a vector with units of length per time.

Position Change and Instant Velocity

position and displacement vectors

Describing Motion with Position Changes

Describing motion starts with position. Position tells where an object is at a particular time. It must be measured relative to a frame of reference, which is an arbitrary set of axes used to describe position and motion. Earth is often used as a frame of reference. It helps describe an object’s location in relation to stationary objects on Earth. Many important motions also take place in two dimensions, or in a plane. In those cases, position, velocity, and acceleration can each be described...

average and instantaneous velocity vectors

Position change and instant velocity are key ideas in kinematics. To describe motion, time must be included. Time tells us where an object is and how fast it is moving. The speed of an object comes from how its position changes with time. Each position is tied to a specific time. When the details of motion at each instant are not important, the rate is given as average velocity. Average velocity is a vector. It equals the total displacement between two points divided by the elapsed time. Real...

acceleration vectors

How Velocity Changes Create Acceleration

Acceleration describes how velocity changes over time. In physics, acceleration is a vector, which means it has both size and direction. It points in the same direction as the change in velocity, written as Δv. The larger the acceleration, the larger the change in velocity over a given time. Because velocity is a vector, it can change in more than one way. An object can speed up, slow down, change direction, or do both at once. A runner traveling 10 km/h due east who stops, turns around, and...

direction of acceleration vectors

Negative Acceleration and Motion Reversal

Acceleration describes a change in velocity. That change can be a change in speed, a change in direction, or both. The acceleration vector points in the direction of the velocity change, not always in the direction the object is moving. When an object slows down, its acceleration points opposite to its motion. This is often called deceleration. The term can be confusing in physics because deceleration is not a vector. It does not give a direction relative to a coordinate system, so the correct...

projectile motion

Projectile Paths Under Gravity

Projectile motion describes the path of an object thrown into the air under Earth’s gravity. The object is called a projectile, and its curved path is called the trajectory. This motion appears in many real situations, such as fireworks, a golf ball in flight, meteors entering Earth’s atmosphere, and bullets being fired. When a falling object has no horizontal movement, it is described as one-dimensional projectile motion. When motion includes both horizontal and vertical parts, it is...

/files/media/science-education/science-education-thumbs/12634.jpg

projectile motion: equations

Solving Projectile Motion with Components

Projectile motion can be solved by breaking the motion into horizontal and vertical components. This approach is used for common examples like a basketball throw, an arrow shot from a bow, and kids jumping into a pool. The motion is then analyzed along the x-axis and y-axis. Start by separating displacement into x and y parts. The horizontal and vertical parts of velocity are also separated. If the projectile has speed v and direction θ relative to the horizontal, the vertical component is...

projectile motion: example

Projectile Motion in Sports and Orbit

Projectile motion helps explain both sports throws and motion near Earth. A javelin thrower uses this idea to send the javelin as far as possible. The thrower also takes a short run-up to increase the initial speed of the javelin. For a projectile on level ground, the range is the horizontal distance it travels. The range is largest at a 45° angle, so javelin throwers try to release the javelin as close to that angle as possible. In this case, the range equation assumes the distance is very...

uniform circular motion

Centripetal Acceleration in Circular Motion

Uniform circular motion describes motion in a circle at constant speed. An object follows a curved path, but its speed does not change. The motion of a point on a propeller spinning at a steady rate and the second, minute, and hour hands of a watch are common examples. Even with constant speed, these objects are still accelerating. That idea can seem surprising because in one-dimensional motion, constant speed means zero acceleration. In two- and three-dimensional motion, a particle can...

non-uniform circular motion

Circular Motion with Changing Speed

Circular motion can happen with changing speed. In this case, the object still follows a circular path, but it may speed up or slow down as it moves. When speed changes during circular motion, the motion is called non-uniform circular motion. This adds tangential acceleration, which points along the path of motion and shows a change in speed. Centripetal acceleration is still present in circular motion. It describes the time rate of change of the direction of the velocity vector and points...

relative velocity in one dimension

Relative Motion in a Train and Earth

Relative motion depends on the reference frame used to measure velocity. A reference frame is the point of view from which motion is described. In many examples, Earth is the reference frame. If someone is said to be sitting in a train moving east at 10 m/s, that speed is measured relative to Earth.

relative velocity in two dimensions

Adding Velocities Across Reference Frames

Relative velocity describes motion as measured from a chosen reference frame. It can also describe the motion of one reference frame compared with another. In two dimensions, this idea helps track how position and velocity change from frame to frame. Consider a particle P and two reference frames, S and S′. The position of the origin of S′, measured in S, and the position of P, measured in S′, can be combined with vector addition to find the position of P in S. This relation shows how motion...

key terms and concepts

Learn how time, displacement, average velocity, and instantaneous velocity describe motion in kinematics. Clear high school physics support for grades 9–12.

Position Change and Instant Velocity | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

PS.Phy.1.2

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Forces And Motion

Motion

Motion Graphs

Virginia  Standards of Learning

HIgh School

PS.8

PS.8.a

PH.2

PH.2.a

PH.2.c

Texas Essential Knowledge and Skills

High School

PHYS.5

PHYS.5.D

Arizona Science Standards

HS+Phy.P3

HS+Phy.P3U1.3

Alabama Course of Study Science

Motion and Stability: Forces and Interactions

9-12.P.1.1

9-12.P.1.1.c

Florida Department of Education

SC.912.P.12

SC.912.P.12.2

Georgia Standards of Excellence

SPS8.

Describing Motion

SP1.

Two-Dimensional Motion

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Linear Momentum

The term momentum is used in various ways in everyday language, most of which are consistent with the precise scientific definition. Generally, momentum ...

Force and Momentum

Force and momentum are intimately related. Force acting over time can change momentum, and Newton&#39;s second law of motion can be stated in its most ...

Analyze and interpret data to explain the motion of an object moving with a constant velocity or that is accelerating.

Electrical Current

Electrical current is defined as the rate at which charge flows. When there is a large current present, such as that used to run a refrigerator, a large ...

Drift Velocity

The high speed of electrical signals results from the fact that the force between charges acts rapidly at a distance. Thus, when a free charge is forced ...

Current Density

The total amount of current flowing through one unit value of a cross-sectional area is referred to as current density. If the current flow is uniform, ...

Resistivity

When a voltage is applied to a conductor, an electrical field is generated, and charges in the conductor feel the force due to the electrical field. The ...

Resistance

When a current moves through any conductor, the conductor causes some level of difficulty for the current to flow. The measure of that difficulty is known ...

Ohm's Law

Many materials exhibit a simple relationship between the values of current, voltage, and resistance, known as Ohm&#8217;s law. The current that flows ...

Non-ohmic Devices

In most substances, the current flow is proportional to the voltage applied to it. A simple relationship between the values of current, voltage, and ...

Construct an explanation to compare simple series and parallel circuits in terms of Ohm's Law.

PS.PSc.6.2

Continuity Equation

The total amount of current flowing per unit cross-sectional area is called the current density. Hence, the current passing through a cross-sectional area ...

Boundary Conditions for Current Density

Current density becomes discontinuous across an interface of materials with different electrical conductivities. The normal component of the current ...

Electrical Conductivity

In perfect conductors, the electric field inside is always zero due to the abundance of free electrons, which nullify any field by flowing. As a result, ...

Theory of Metallic Conduction

The conduction of free electrons inside a conductor is best described by quantum mechanics. However, a classical model makes predictions close to the ...

Obtain, evaluate, and communicate information to explain how current is affected by changes in composition, length, temperature, and diameter of wire.

PS.PSc.6.3

Magnetism

Magnets are commonly found in everyday objects, such as toys, hangers, elevators, doorbells, and computer devices. Experimentation on these magnets shows ...

Magnetic Fields

A moving charge or a current creates a magnetic field in the surrounding space, in addition to its electric field. The magnetic field exerts a force on ...

Magnetic Field Lines

The representation of magnetic fields by magnetic field lines is very useful in visualizing the strength and direction of the magnetic field. Each of the ...

Magnetic Flux

The magnetic flux measures the number of magnetic field lines passing through a given surface area. The SI unit for magnetic flux is the weber (Wb). ...

motion-of-a-charged-particle-in-a-magnetic-field

Motion Of A Charged Particle In A Magnetic Field

A charged particle experiences a force when moving through a magnetic field. Consider the field to be uniform and the charged particle to move ...

Magnetic Force

In addition to the electric forces between electric charges, moving electric charges exert magnetic forces on each other. A magnetic field is created by a ...

magnetic-force-on-a-current-carrying-conductor

Magnetic Force On A Current-Carrying Conductor

Moving charges experience a force in a magnetic field. Since the magnetic fields produced by moving charges are proportional to the current, a conductor ...

magnetic-force-on-current-carrying-wires-example

Magnetic Force On Current-Carrying Wires: Example

In a magnetic field, moving charges encounter a force. If a wire contains these moving charges, i.e., if the wire is carrying a current, then a force acts ...

force-on-a-current-loop-in-a-magnetic-field

Force On A Current Loop In A Magnetic Field

Magnetic forces on wires carrying current are most frequently applied in motors. A DC motor is a device that converts electrical energy into mechanical ...

torque-on-a-current-loop-in-a-magnetic-field

Torque On A Current Loop In A Magnetic Field

The most common application of magnetic force on current-carrying wires is in electric motors. These consist of loops of wire, which are placed between ...

The Hall Effect

Edwin H. Hall, in the year 1879, devised an experiment that could be used to identify the polarity of the predominant charge carriers in a conducting ...

Magnetic Field due to Moving Charges

A stationary charge creates and interacts with the electric field, while a moving charge creates a magnetic field.
Consider a point charge moving with a ...

Biot-Savart Law

The Biot-Savart law gives the magnitude and direction of the magnetic field produced by a current. This empirical law was named in honor of two ...

Biot-Savart Law: Problem-Solving

The magnitude and direction of a magnetic field created by a steady current can be calculated using the Biot-Savart law.
Consider a mobile phone battery ...

Magnetic Field Due to Two Straight Wires

Consider two parallel straight wires carrying a current of 10 A and 20 A in the same direction and separated by a distance of 20 cm. Calculate the ...

magnetic-force-between-two-parallel-currents

Magnetic Force Between Two Parallel Currents

Two long, straight, and parallel current-carrying conductors exert a force of equal magnitude on one another. The direction of the force depends on the ...

Magnetic Field Of A Current Loop

Consider a circular loop with a radius a, that carries a current I. The magnetic field due to the current at an arbitrary point P along the axis of the ...

Divergence and Curl of Magnetic Field

The magnetic field due to a volume current distribution given by the Biot&#8211;Savart Law can be expressed as follows:

To evaluate the divergence of the ...

Ampere's Law

A fundamental property of a static magnetic field is that it is not conservative, unlike an electrostatic field. Instead, there is a relationship between ...

Ampere's Law: Problem-Solving

Ampere&#x27;s law states that for any closed looped path, the line integral of the magnetic field along the path equals the vacuum permeability times the ...

Solenoids

A solenoid is a conducting wire coated with an insulating material, wound tightly in the form of a helical coil. The magnetic field for a solenoid is the ...

Magnetic Field of a Solenoid

A solenoid is a conducting wire coated with an insulating material, wound tightly in the form of a helical coil. The magnetic field due to a solenoid is ...

Toroids

A toroid is a closely wound donut-shaped coil constructed using a single&#xA0; conducting wire. In general, it is assumed that a toriod consists of ...

Use models to explain magnetism in terms of domains, interactions of poles, and magnetic fields.

PS.PSc.6.4

Analyze motion in terms of speed, velocity, acceleration, and momentum.

Position Change and Instant Velocity

Description

Transcript

More videos by Standards