Name: motion energy in collisions
Uploaded: 2023-04-30T10:55:59.000Z
Duration: 1 min 18 s
Channel: JoVE

K12 Standards

Pennsylvania State Academic Standards

9-12

Physical Science

Energy

3.2.9-12.P

Kinetic Energy - I

물체가 운동으로 인해 가지고 있는 에너지를 운동 에너지라고 합니다. 물체가 속도 v로 움직이는 경우 운동 에너지는 질량과 속도의 제곱 곱의 1/2로 정의됩니다.
여기서 속도의 제곱은 그 자체와 함께 속도 벡터의 내적입니다. 따라서 운동 에너지는 운동 방향과 무관하고 물체의 속도에만 의존하기 때문에 스칼라 양입니다.
질량과 속도의 제곱은 절대 음수일 수 없습니다. 따라서 물체가 가지고 있는 운동 에너지는 항상 양수이며 속도가 증가함에 따라 빠르게 증가합니다.
예를 들어, 질량이 다른 두 개의 볼링공이 같은 속도로 움직이는 경우 두 번째 볼링공은 질량이 두 배이기 때문에 운동 에너지가 두 배입니다.
가벼운 공의 속도가 두 배가 되면 운동 에너지가 4배 증가합니다. 물체의 질량이나 속도가 무시할 수 있는 수준이면 운동 에너지는 0이 됩니다.

운동에너지 - i

신체의 속도가 빠를수록 다른 신체에 더 큰 영향을 미칠 수 있다고 가정하는 것은 타당합니다. 이는 속도의 방향에는 영향을 받지 않고 크기에만 영향을 받습니다. 17세기 말에 한 물체가 정지해 있는 동일한 물체와 정면 충돌하는 두 개의 완전 탄성 물체 사이의 충돌을 설명하기 위해 역학에 양이 도입되었습니다. 충돌하면 첫 번째 몸체가 멈추고 두 번째 몸체는 첫 번째 몸체의 초기 속도로 이동합니다. 당구나 크로케를 해보거나 뉴턴의 요람을 본 적이 있다면 이러한 유형의 충돌을 본 적이 있을 것입니다. 이 양의 이면에 있는 개념은 신체에 작용하는 힘과 관련이 있으며 '운동 에너지'라고 합니다. 나중에 18세기에 운동 에너지라는 이름이 운동 에너지에 붙여졌습니다.

이를 염두에 두고 우리는 운동 에너지에 대한 고전적인 정의를 갖게 되었습니다. 우리가 '고전적'이라고 말할 때는 비상대적이라는 뜻입니다. 즉, 빛의 속도보다 훨씬 느린 속도로 진행됩니다. 빛의 속도에 필적하는 속도에서 특수 상대성 이론은 입자의 운동 에너지에 대해 다른 표현을 요구합니다.

운동 에너지의 단위는 질량에 속도의 제곱을 곱한 것입니다(kg·m·/s·).  힘의 단위는 질량에 가속도(kg·m/s²)를 곱한 것이므로 운동 에너지의 단위도 힘에 거리를 곱한 단위입니다. 이는 작업 단위(줄)입니다.

입자의 운동 에너지는 단일 양이지만 입자 시스템의 운동 에너지는 때때로 시스템과 그 운동에 따라 다양한 유형으로 나눌 수 있습니다. 예를 들어, 시스템의 모든 입자가 동일한 속도를 갖는 경우 시스템은 병진 운동을 겪고 있으며 병진 운동 에너지를 갖습니다. 물체가 회전하는 경우 회전 운동 에너지를 가질 수 있습니다. 물체가 진동하는 경우 진동 운동 에너지를 가질 수 있습니다. 내부 기준계에 상대적인 계의 운동 에너지를 내부 운동 에너지라고 합니다. 무작위 분자 운동과 관련된 운동 에너지를 열에너지라고 합니다. 이 이름은 적절한 경우 이후 장에서 사용됩니다. 이름에 관계없이 모든 종류의 운동 에너지는 동일한 물리량으로 운동과 관련된 에너지를 나타냅니다.

이 텍스트는 <a href="https://openstax.org/books/university-physics-volume-1/pages/7-2-dynamic-energy"> 에서 발췌되었습니다. Openstax, 대학 물리학 1권, 섹션 7.2: 운동 에너지.</a>

운동에너지 - I

물체의 속도가 클수록 다른 물체에 더 큰 영향을 미칠 수 있다고 가정하는 것이 그럴듯합니다. 이것은 의존하지 않습니다 ...

Education

교육

JoVE Core

Physics

물리학

Unit 1

제1단원

Work and Kinetic Energy

일과 운동 에너지

KEY TERMS AND CONCEPTS

주요 용어 및 개념

motion energy in collisions

Kinetic energy is the energy of motion. It depends on how fast an object moves, not on the direction of its velocity. In classical mechanics, this idea helps explain how moving bodies affect other bodies during collisions.

A classic example is a perfectly elastic, head-on collision between two identical bodies, with one body initially at rest. After the collision, the first body stops, and the second body moves away with the first body's original velocity. This same pattern can be seen in billiards, croquet, and a Newton's cradle.

The term was first tied to the idea of the energy of motion and later named kinetic energy in the eighteenth century. Here, classical means non-relativistic, so it applies at speeds much slower than the speed of light. At speeds near the speed of light, special relativity requires a different expression for kinetic energy.

The units of kinetic energy are mass times speed squared, or kg·m²/s². These units are the same as force times distance, which are the units of work. That is why kinetic energy is measured in joules.

For a system of particles, kinetic energy can take different forms based on the motion of the system. If all the particles share the same velocity, the system has translational kinetic energy. Rotating objects can have rotational kinetic energy, and vibrating objects can have vibrational kinetic energy.

Kinetic energy can also be described relative to an internal frame of reference, where it is called internal kinetic energy. The kinetic energy linked to random molecular motion is called thermal energy. Even with different names, each type still represents energy associated with motion.

Motion Energy in Collisions

work

Work in Physics: Force and Motion

Work in physics connects force, motion, and energy transfer. Work is done when a force acts on an object and that object moves from one position to another. If there is no displacement, no work is done, even if a force is present. The amount of work depends on the force and the direction of motion. For a very small displacement, the work done is written as the dot product of force and displacement vectors. That means work depends on the size of the vectors and the angle between them. You can...

positive, negative, and zero work

How Force Direction Changes Work

Work in physics depends on the direction of a force and the way an object moves. Work is done when energy is transferred to an object. It happens when a force acts on a body that moves from one position to another. The work done by a force is defined as the integral of the force with respect to displacement along the path. Forces can change with position, and an object can move along different paths between the same two points. In vector form, the size of a force times the cosine of the angle...

energy

Energy Sources and Forms in Matter

Energy in matter comes from the Sun and changes form in many everyday processes. The universe is made of matter in different forms, and all forms of matter contain energy. On Earth, many energy sources can be traced back to the Sun, which is the ultimate energy source. Plants capture light energy from the Sun during photosynthesis and convert it into chemical energy. This stored energy can then be used in several ways. People get energy from plant foods, and wood or coal, which are fossilized...

types of potential energy

Potential Energy Examples in Everyday Physics

Potential energy is stored energy, and it appears in several everyday forms. It is also called energy at rest because it is ready to be used later. In physics, different systems can store energy in different ways. Gravitational potential energy is the energy stored by an object because of its position. An apple hanging from a tree is one clear example. Electrical potential energy is stored when electric charges attract or repel each other. Chemical potential energy is stored in the bonds...

types of kinetic energy

How Mass and Speed Affect Kinetic Energy

Kinetic energy depends on an object’s mass and speed. A heavier object moving at the same speed has more kinetic energy than a lighter one. An object moving faster also has more kinetic energy when the mass stays the same. The transcript also describes several forms of kinetic energy. Mechanical energy is linked to the motion of an object. A bullet fired from a gun and water flowing down a dam are examples of mechanical energy. Electrical energy comes from the flow of electric charges.

kinetic energy - i

Kinetic energy is the energy of motion. It depends on how fast an object moves, not on the direction of its velocity. In classical mechanics, this idea helps explain how moving bodies affect other bodies during collisions. A classic example is a perfectly elastic, head-on collision between two identical bodies, with one body initially at rest. After the collision, the first body stops, and the second body moves away with the first body's original velocity. This same pattern can be seen in...

kinetic energy - ii

Kinetic Energy, Momentum, and Reference Frames

Kinetic energy depends on mass, speed, momentum, and the frame of reference. For a particle, it is one-half of the particle’s mass times the square of its speed. The same idea can also be written in terms of mass and momentum instead of mass and velocity. The units of kinetic energy are mass times speed-squared. These units match the units of work. Force times distance also gives the same units, so kinetic energy and work are measured in joules. That is why work and kinetic energy are two...

work-energy theorem

Work Done and Kinetic Energy

Work done by the net force is linked to an object's kinetic energy. In physics, the net force is the total force acting on an object. Kinetic energy is the energy of motion. The work-energy theorem states that the work done by all forces on an object equals the change in its kinetic energy. This relationship is useful when acceleration is not constant. If the change in velocity is known, the theorem can still help calculate the work done by a force. It connects force, motion, and energy in a...

work and energy for variable forces

Variable Force Work via Graphs and Energy

Variable force work and energy can be found by using force-displacement graphs and the work-energy principle. When a force changes as an object moves, the calculation is more complex than for a constant force. Work is the product of force and displacement, and energy is the capacity of a system to do work. For a constant force, work is found by multiplying the force by the distance moved in the direction of the force. For a variable force, the work done is the area under the force-displacement...

/files/media/science-education/science-education-thumbs/14699.jpg

work-energy theorem for motion along a curve

work-energy-theorem-for-motion-along-a-curve

Work-Energy Along Curved Paths

The work-energy theorem can be applied to motion along a curved path. A curved path can be treated as many tiny straight paths added together. On each small part, the force can be taken as constant, so the work-energy theorem can be used there. The total result comes from adding the work done along all of those small path segments. The net work is found with an integral, which adds the work from each infinitesimal path. The total change in kinetic energy is the sum of the changes along the way.

/files/media/science-education/science-education-thumbs/14700.jpg

work done over an inclined plane

Gravity and Work on Sloped Motion

Gravity and work on sloped motion can be described with the center-of-mass framework. For a rigid body, internal forces do no work, so they can be ignored. The work-energy theorem then uses only the external forces. The work done by gravity depends on the path of the body’s center of mass. If gravity helps increase kinetic energy, the work is positive. If an object is lifted against gravity, the work is negative because kinetic energy decreases. For horizontal motion, the work done by or...

/files/media/science-education/science-education-thumbs/14701.jpg

work done by many forces

Calculating Work from Multiple Forces

Calculating work from multiple forces can be done in two ways, and both methods give the same result. One method finds the work done by each force first. The other method finds the net force by adding the force vectors first.

/files/media/science-education/science-education-thumbs/14735.jpg

work done by gravity

Gravity and Positive vs Negative Work

Gravity is one of the four fundamental forces in nature. On Earth, the force between an object and Earth is called gravity. Gravity does work on an object when it moves the object toward Earth’s center. In that case, the work done by gravity is positive. When an external force lifts an object away from Earth’s center, that force works against gravity. The net work done in this case is negative. If an object moves along the Earth with no change in distance toward or away from Earth’s center,...

/files/media/science-education/science-education-thumbs/14750.jpg

power

Power in Work and Motion

Power connects work with the time needed to do it. Work depends on force and displacement. The work-energy theorem also links net work on an object to the change in its kinetic energy between two points on its path. These ideas do not include time directly, but time still matters in many real situations. A sprinter is a clear example. Two runners may reach the same finish speed, so they do the same amount of work. The winner is the one who reaches that speed in less time. Power describes this...

power expended by a constant force

Power as the Rate of Doing Work

Power describes how fast work is done. In physics, two sprinters can cross the finish line with the same velocity and do the same amount of work, but the one who finishes first has greater power because the work takes less time. Average power is the work done during a time interval divided by that time interval. When the time interval becomes very small, this becomes instantaneous power. That gives the power at a specific moment instead of over a longer stretch of time. Power can also be...

key terms and concepts

Learn how kinetic energy explains collisions, motion, and energy units. See examples like billiards, Newton's cradle, rotation, vibration, and thermal energy.

Motion Energy in Collisions | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

3.2.9-12.Q

Louisiana Student Standards for Science

High School

HS-PS3-2

HS-PS3-3

HS-PS3-1

Tennessee Academic Standards

PHYS.PS3.1

Minnesota Academic Standards in Science

2.2.1 9P.2.2.1.1

new-jersey-student-learning-standards-for-science

New Jersey Student Learning Standards for Science

Arizona Science Standards

HS+Phy.P4

HS+Phy.P4U1.6

Next Generation Science Standards

Florida Department of Education

SC.912.P.10

SC.912.P.10.1

SC.912.P.12

SC.912.P.12.9

Texas Essential Knowledge and Skills

PHYS.7

PHYS.7.B

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

P-PS3-1

P-PS3-2

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Energy

HS-PS3-1.

Georgia Standards of Excellence

SP3.

Work-Kinetic Energy Theorem.

The universe is composed of matter in different forms, and all forms of matter contain energy.&#160; The different forms of energy on Earth originate from ...

Energy Basics

Chemical reactions, such as those that occur when you light a match, involve changes in energy as well as matter.

Chemical changes and their accompanying ...

Conservation of Mechanical Energy

The mechanical energy E of a system is the sum of its potential energy U and the kinetic energy K of the objects within it. What happens to this ...

/files/media/science-education/science-education-thumbs/14702.jpg

Conservation of Energy

The terms &#39;conserved quantity&#39;&#160;and &#39;conservation law&#39;&#160;have specific scientific meanings in physics, which differ from the ...

Conservation of Energy: Application

When solving problems using the energy conservation law, the object (system) to be studied should first be identified. Often, in applications of energy ...

Students who demonstrate understanding can create a computational model to calculate the change in the energy of one component in a system when the change in energy of the other component(s) and energy flows in and out of the system are known. Clarifying Statement: Emphasis is on explaining the meaning of mathematical expressions used in the model. Assessment Boundry: Assessment is limited to basic algebraic expressions or computations; to systems of two or three components; and to thermal energy. kinetic energy, and/or the energies in gravitational, magnetic, or electric fields.

3.2.9-12.O

Types of Potential Energy

Potential energy is also known as energy at rest or stored energy. Common types of potential energy include the gravitational potential energy stored in ...

Types of Kinetic Energy

The amount of kinetic energy of an object depends on its mass and speed. Consider two balls of different masses rolling down an inclined plane at the same ...

It&#8217;s plausible to suppose that the greater the velocity of a body, the greater effect it could have on other bodies. This does not depend on the ...

Kinetic Energy - II

The kinetic energy of a particle is one-half of the product of the particle&#8217;s mass and the square of its speed. Note that just as Newton&#8217;s ...

Gravitational Potential Energy

Potential energy is not just a property of each object, but also a property of the interactions between objects in a chosen system. For each type of ...

Elastic Potential Energy

Elastic potential energy is the energy stored as a result of the deformation of an elastic object, such as the stretching of a spring. An object is ...

Energy in Simple Harmonic Motion

To determine the energy of a simple harmonic oscillator, consider all the forms of energy it can have during its simple harmonic motion. According to ...

/files/media/science-education/science-education-thumbs/12765.jpg

problem-solving-energy-in-simple-harmonic-motion

Problem Solving: Energy in Simple Harmonic Motion

Simple harmonic motion (SHM) is a type of periodic motion in time and position, in which an object oscillates back and forth around an equilibrium ...

/files/media/science-education/science-education-thumbs/14743.jpg

Kinetic and Potential Energy of a Wave

All forms of waves carry energy; this is directly visualized in nature. For instance, the waves of earthquakes are so intense that they can shake huge ...

Energy and Power of a Wave

The total energy associated with a wavelength is the sum of the potential energy and the kinetic energy. The average rate of energy transfer associated ...

Energy Carried By Electromagnetic Waves

Anyone who has used a microwave oven knows there is energy in electromagnetic waves. Sometimes, this energy is obvious, such as in the summer sun&#39;s ...

Students who demonstrate understanding can develop and use models to illustrate that energy at the macroscopic scale can be accounted for as a combination of energy associated with the motions of particles (objects) and energy associated with the relative positions of particles (objects). Clarifying Statement: Examples of phenomena at the macroscopic scale could include the conversion of kinetic energy to thermal energy, the energy stored due to position of an object above the earth, and the energy stored between two electrically-charged plates. Examples of models could include diagrams, drawings, descriptions, and computer simulations. Assessment Boundry: N/A

What is Energy?

The universe is composed of matter in different forms, and all forms of matter contain energy. &#xA0;The different forms of energy on Earth originate from ...

Energy Transfer in Chemical Reactions

Chemical reactions require sufficient energy to cause the matter to collide with enough precision and force that old chemical bonds can be broken and new ...

Students who demonstrate understanding can design, build and refine a device that works within given constraints to convert one form of energy into another form of energy. Clarifying Statement: Emphasis is on both qualitative and quantitative evaluations of devices. Examples of devices could include Rube Goldberg devices, wind turbines, solar cells, solar ovens, and generators. Examples of constraints could include use of renewable energy forms and efficiency. Assessment Boundry: Assessment for quantitative evaluations is limited to total output for a given input. Assessment is limited to devices constructed with materials provided to students.

Students who demonstrate understanding can plan and conduct an investigation to provide evidence that the transfer of thermal energy when two components of different temperature are combined within a closed system results in a more uniform energy distribution among the components in the system (second law of thermodynamics). Clarifying Statement: Emphasis is on analyzing data from student investigations and using mathematical thinking to describe the energy changes both quantitatively and conceptually. Examples of investigations could include mixing liquids at different initial temperatures or adding objects at different temperatures to water. Assessment Boundry: Assessment is limited to investigations based on materials and tools provided to students.

3.2.9-12.R

force-and-potential-energy-in-one-dimension

Force and Potential Energy in One Dimension

Force can be calculated from the expression for potential energy, which is a function of position. The component of a conservative force, in a particular ...

force-and-potential-energy-in-three-dimensions

Force and Potential Energy in Three Dimensions

Consider a particle moving under the action of a conservative force that has components along each coordinate axis. Each component of force is a function ...

Energy Diagrams - I

The dynamics of a mechanical system can be easily understood by interpreting a potential energy diagram. Since energy is a scalar quantity, the ...

Energy Diagrams - II

Energy diagrams are important to understand the dynamics of a system. The topology of an energy diagram helps illustrate the equilibrium points of the ...

Students who demonstrate understanding can develop and use a model of two objects interacting through electric or magnetic fields to illustrate the forces between objects and the changes in energy of the objects due to the interaction. Clarifying Statement: Examples of models could include drawings, diagrams, and texts, such as drawings of what happens when two charges of opposite polarity are near each other. Assessment Boundry: Assessment is limited to systems containing two objects.

3.2.9-12.S

Motion Energy in Collisions

Description

Transcript

More videos by Standards