Name: resonance in driven oscillators
Uploaded: 2025-05-22T09:05:41.000Z
Duration: 1 min 6 s
Channel: JoVE

끈에 묶여 있고 단단한 지지대에 매달려 있는 4개의 진자를 생각해 보십시오. 진자 A와 C의 길이는 같고 진자 B와 D의 길이는 다릅니다.
진자 A가 변위되면 고유 주파수로 자유 진동을 겪습니다. 고유 주파수는 진자가 감쇠력이나 구동력이 없을 때 자연적으로 진동하는 주파수입니다.
진자 A의 에너지는 다른 진자로 전달되어 구동 주파수로 진동하도록 합니다. 진자 A에 의해 가해지는 외부 추진력으로 인한 이러한 결과 진동을 강제 진동이라고 합니다.
진자에 작용하는 추진력은 진폭 F0 및 구동 각도 주파수를 사용하여 주기적으로 변화하는 힘으로 나타낼 수 있습니다.
얻어진 구동력을 감쇠 고조파 발진기의 힘 방정식에 추가함으로써, 강제 발진기의 운동 방정식이 얻어집니다.

강제진동

오실레이터에 주기적인 구동력이 가해지면 모션이 혼란스러워 보일 수 있습니다. 이러한 발진기의 움직임을 과도 현상이라고 합니다. 과도 현상이 사라진 후 발진기는 정상 상태에 도달하며, 여기서 모션은 주기적이며 변위가 결정됩니다.

<img alt="Equation1" src="/files/ftp_upload/12771/12771_Equation_1.png" style="text-align: center; height: 13px;" />

힘과 운동의 방정식을 사용하여 구동 발진기의 진폭을 얻습니다. 자연빈도와 주행빈도에 따라 다릅니다.

<img alt="Equation2" src="/files/ftp_upload/12771/12771_Equation_2.png" style="text-align: center; height: 40px;" />

진폭 방정식에서 구동 주파수가 고유 주파수보다 훨씬 작거나 훨씬 클 경우 두 각주파수 차이의 제곱이 양수이고 크기 때문에 진동에 대한 진폭이 작아집니다. 질량. 구동력의 주파수가 시스템의 고유 주파수에 가까워지면 진동의 진폭이 증가합니다. 구동력의 주파수가 시스템의 고유 주파수와 같을 때 최대 진폭이 발생합니다.

실제 사례를 살펴보겠습니다. 우리 대부분은 손가락에 매달린 패들볼처럼 고무 밴드로 지지되는 물체가 포함된 장난감을 가지고 놀았습니다. 처음에는 손가락을 안정적으로 잡으면 공이 약간의 감쇠와 함께 위아래로 튕겨 나옵니다. 손가락을 천천히 위아래로 움직이면 공은 스스로 많이 튀지 않고 따라갑니다. 손가락이 위아래로 움직이는 빈도가 증가함에 따라 공은 진폭이 증가하면서 진동하여 반응합니다. 공이 고유 진동수로 구동되면 공의 진동은 구동되는 동안 진동할 때마다 진폭이 증가합니다.

시스템의 고유진동수와 동일한 주파수로 구동하는 현상을 공진이라고 합니다. 고유 주파수로 구동되는 시스템을 공진한다고 합니다. 구동 주파수가 공진 또는 고유 주파수보다 점차 높아짐에 따라 진동의 진폭은 진동이 거의 사라지고 공에 거의 영향을 주지 않고 손가락이 단순히 위아래로 움직일 때까지 작아집니다.

이 텍스트는 <a href="https://openstax.org/books/college-physics/pages/16-8-forced-oscillations-and-resonance"> 에서 수정되었습니다. Openstax, 대학 물리학, 섹션 16.8: 강제 진동 및 공명 </a>및 <a href="https://openstax.org/books/university-physics-volume -1/pages/15-6-forced-oscillations">Openstax, 대학 물리학 1권, 섹션 15.5: 강제 진동.</a>

오실레이터에 주기적인 구동력이 가해지면 모션이 혼란스러워 보일 수 있습니다. 이러한 발진기의 움직임을 과도 현상이라고 합니다. 후...

Education

교육

JoVE Core

Physics

물리학

Unit 1

제1단원

Oscillations

진동

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Forced Oscillations

resonance in driven oscillators

Resonance in driven oscillators describes how a periodic force changes an object’s motion. A driven oscillator may first move in a messy way. These early motions are called transients. After the transients die out, the oscillator reaches a steady state. In this state, the motion becomes periodic and the displacement is determined.

The amplitude of a driven oscillator can be found from the equations for force and motion. That amplitude depends on the natural frequency of the system and the driving frequency. If the driving frequency is much lower or much higher than the natural frequency, the difference between the two angular frequencies is large. In that case, the amplitude is small. As the driving frequency gets closer to the natural frequency, the amplitude increases. When the two frequencies are equal, the amplitude reaches its maximum.

A common example is a paddle ball suspended from a finger by an elastic band. When the finger stays still, the ball bounces up and down with only a small amount of damping. If the finger moves up and down slowly, the ball follows along and does not bounce much on its own. As the finger moves faster, the ball responds with larger oscillations.

When the ball is driven at its natural frequency, its motion grows with each oscillation for as long as the force continues. This is resonance. A system driven at its natural frequency is said to resonate. If the driving frequency becomes higher than the resonant or natural frequency, the amplitude drops again. The oscillations then nearly disappear, and the finger moves up and down with little effect on the ball.

Resonance in Driven Oscillators

simple harmonic motion

Period and Frequency in Simple Harmonic Motion

Simple harmonic motion describes oscillatory motion when the net force follows Hooke's law. In this type of motion, the force acts toward the equilibrium position. If there is no damping from friction or other non-conservative forces, the oscillator moves with equal displacement on both sides of equilibrium. The period of a simple harmonic oscillator is found from the equation of motion. Period is the time for one complete oscillation. Frequency is the inverse of period, so the two values can...

/files/media/science-education/science-education-thumbs/12762.jpg

characteristics of simple harmonic motion

characteristics-of-simple-harmonic-motion

Simple Harmonic Motion: Period and Phase

Simple harmonic motion depends on how displacement, force, and acceleration work together. In this motion, the acceleration of the system, and therefore the net force, is proportional to the displacement and points in the opposite direction. That restoring force pulls the object back toward equilibrium. The period and frequency of a simple harmonic oscillator do not depend on amplitude. A diving board shows this idea well. A stiff, thick diving board has a large force constant, so it has a...

/files/media/science-education/science-education-thumbs/12763.jpg

oscillations about an equilibrium position

oscillations-about-an-equilibrium-position

Stable Equilibrium and Atomic Oscillation

Stable equilibrium is a key idea in oscillation. When an object sits at a stable equilibrium point, a small push moves it away, but it then tends to oscillate around that point. If the equilibrium point is unstable, a slight disturbance will not bring the object back. The transcript also describes a half-stable equilibrium point. It is still considered unstable, but the name comes from the fact that the force on only one side points toward the equilibrium point. That makes it different from a...

energy in simple harmonic motion

Simple Harmonic Motion: Energy and Speed

Simple harmonic motion combines potential energy and kinetic energy. In a spring-like oscillator, Hooke’s law explains the potential energy stored when the string or spring is stretched or compressed. Because there are no dissipative forces, the object also has kinetic energy as it moves.

/files/media/science-education/science-education-thumbs/12765.jpg

frequency of spring-mass system

How Mass and Spring Stiffness Set Oscillation

A spring-mass system shows simple harmonic motion, and its oscillation rate depends on the mass and the spring force constant. In this model, the angular frequency, period, and frequency are set by those two values. They do not depend on the motion’s amplitude or on the initial conditions. To find these relationships, the system can be analyzed with Newton’s second law. Imagine a block on a spring on a frictionless surface. Three forces act on the mass: weight, the normal force, and the spring...

/files/media/science-education/science-education-thumbs/14718.jpg

simple harmonic motion and uniform circular motion

simple-harmonic-motion-and-uniform-circular-motion

Simple Harmonic Motion from Circular Motion

Simple harmonic motion and uniform circular motion are closely linked. Simple harmonic motion is oscillatory motion in a system where the net force follows Hooke’s law. Uniform circular motion is motion along a circular path at constant speed. A simple way to create simple harmonic motion is to use uniform circular motion. One example is a ball attached to a vertical turntable that spins at a steady rate. If you watch the ball’s shadow on the floor, the shadow, or projection, moves in simple...

problem solving: energy in simple harmonic motion

problem-solving-energy-in-simple-harmonic-motion

Energy Conservation in Simple Harmonic Motion

Energy conservation in simple harmonic motion explains how a spring and mass system shares energy as it moves back and forth around equilibrium. Simple harmonic motion, or SHM, is periodic motion in time and position. The object oscillates with a constant amplitude and frequency. In SHM, kinetic energy and potential energy change into each other continuously. A good example is the spring in a car shock absorber as the car moves on a bumpy road. The wheel attached to the spring oscillates in...

/files/media/science-education/science-education-thumbs/14743.jpg

simple pendulum

Pendulum Motion and Period

A simple pendulum is a small ball, or bob, hanging from a string that has negligible mass and does not stretch. Pendulums appear in everyday life, including clocks, swing sets, and a sinker on a fishing line. Their motion is a useful model for studying repeating movement. The period of a simple pendulum depends on two factors: its length and the acceleration due to gravity. The period does not depend on the bob’s mass or on the maximum displacement. For small angles, the pendulum behaves like...

torsional pendulum

Angular Oscillation in a Torsion String

Angular oscillation in a torsion string is shown by a rigid body suspended from a string that twists as it moves. The twisting of the string provides the restoring force. The string is ideally massless, and in practice its mass is much smaller than the rigid body&amp;#39;s mass, so it is neglected. When the angular displacement is small, the motion can be modeled as linear angular oscillation. The amplitude is measured as an angle. In this system, the role of mass is played by the rigid...

/files/media/science-education/science-education-thumbs/12768.jpg

physical pendulum

Physical Pendulum Motion and Inertia

A physical pendulum is a rigid body that hangs from a fixed pivot point and swings when it is displaced. Its motion is similar to a simple pendulum. To describe that motion, physicists use the small-angle approximation, where sin θ ≈ θ. This approximation is valid up to about 14°. The period and angular frequency of a physical pendulum can be found by comparing it with a spring-mass system. The mass moment of inertia is the key quantity that describes how the body’s mass is spread around the...

/files/media/science-education/science-education-thumbs/14719.jpg

measuring acceleration due to gravity

Using Pendulums to Find Gravity

Pendulums can be used to measure the acceleration due to gravity. A simple pendulum is a point mass attached to a string. A physical pendulum is an object that swings in a similar way, but its mass is spread out, so it cannot be treated as a point mass on a string. A physical pendulum is described using rotational motion and moment of inertia. In both types of pendulum, gravity provides the restoring force that brings the object back toward the middle of its swing. For a simple pendulum,...

/files/media/science-education/science-education-thumbs/14720.jpg

damped oscillations

Energy Loss in Oscillations

Oscillations in the real world often lose energy as they move. A system that keeps the same amplitude without any loss is called undamped. That kind of motion is rare, because friction and other non-conservative forces usually reduce the motion over time. Common examples show this clearly. A guitar string stops vibrating a few seconds after it is plucked. A swing also needs a person to keep pushing it if the motion is to continue. In some devices, such as car shock absorbers, damping is useful...

types of damping

How Damping Changes Oscillations

Damping changes how a system oscillates by reducing its back-and-forth motion. As damping increases, the period and frequency begin to change because damping opposes motion and lowers the net force in both directions. When damping is very large, the system stops oscillating altogether. It then moves slowly toward equilibrium. An overdamped system reaches equilibrium slowly. An underdamped system reaches equilibrium faster, but it oscillates around the equilibrium point while doing so. A...

forced oscillations

Resonance in driven oscillators describes how a periodic force changes an object’s motion. A driven oscillator may first move in a messy way. These early motions are called transients. After the transients die out, the oscillator reaches a steady state. In this state, the motion becomes periodic and the displacement is determined. The amplitude of a driven oscillator can be found from the equations for force and motion. That amplitude depends on the natural frequency of the system and the...

concept of resonance and its characteristics

concept-of-resonance-and-its-characteristics

Resonance in Music, Cars, and Radios

Resonance is a key feature of driven oscillators, and it depends strongly on damping. Damping is the process that reduces motion by removing energy from the system. When a system must resonate at one specific frequency, very light damping is needed. Piano strings and many other musical instruments are common examples of this kind of response. Heavy damping works better when the goal is small-amplitude oscillations. A car suspension system uses this approach so that bumps do not produce large...

/files/media/science-education/science-education-thumbs/12772.jpg

key terms and concepts

See how driven oscillators reach steady motion, why amplitude depends on driving and natural frequency, and how resonance makes a paddle ball swing higher.

Resonance in Driven Oscillators | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Resonance in Driven Oscillators

Description

Transcript