Name: liquid-gas changes on pv curves
Uploaded: 2025-05-22T09:05:49.000Z
Duration: 1 min 18 s
Channel: JoVE

K12 Standards

Tennessee Academic Standards

High School

Chemistry

Matter and Its Interactions

CHEM1.PS1.6

pV-Diagrams

이상 기체의 경우 온도와 몰 수가 일정하면 압력 곱하기 부피가 일정합니다. 압력 대 부피의 플롯은 pV 등온선이라고 하는 쌍곡선을 생성합니다. 서로 다른 일정한 온도의 경우 pV 다이어그램 집합이 표시됩니다.
비이상 기체는 더 높은 온도에서 이상 기체처럼 거동합니다. 비이상 기체의 온도가 임계 온도로 낮아지면 pV 곡선은 기울기가 0인 영역을 보여줍니다.
온도가 더 낮아지면 기울기가 0인 영역이 증가한다고 가정합니다. 이 영역은 압력의 변화 없이 부피의 변화를 나타냅니다.
등온선 T2 의 경우 등온선의 영역 A-B 는 액화 단계를 나타냅니다. 기체는 A 지점까지 증기 상태이고 B 지점을 넘어서는 액체 상태입니다.
온도가 T2 보다 낮은 등온선의 경우 액화는 더 낮은 압력과 더 높은 부피에서 시작됩니다.
임계 온도 이상의 등온선의 경우 액화가 발생하지 않습니다. 임계 온도는 주어진 임계 압력에 대해 연구 중인 가스의 속성입니다.

<ol>
	<li>Young, H.D 및 Freedman, RA (2012). 현대 물리학을 가진 대학 물리학. 샌프란시스코, 캘리포니아 : 피어슨; 섹션 18.1; 596쪽.</li>
	<li>오픈스택스. (2019). 대학 물리학 Vol. 2. [웹 버전]. 원본 주소 <a href="https://openstax.org/details/books/university-physics-volume-2">https://openstax.org/details/books/university-physics-volume-2</a>; 섹션 2.1; 75-77쪽.</li>
</ol>

pv-다이어그램

연구 중인 가스의 압력 대 부피 그래프인 pV 다이어그램은 물질의 특정 측면을 설명하는 데 도움이 됩니다. 물질이 이상기체처럼 행동할 때 이상기체 방정식은 압력과 부피 사이의 관계를 설명합니다. pV 다이어그램에서는 분자 수와 온도가 고정된 상태에서 p를 V의 함수로 표시하는 곡선인 등온선을 그리는 것이 일반적입니다. 그러면 이상기체의 경우 기체의 압력과 부피의 곱이 일정합니다. 예를 들어, 압력이 증가하면 기체의 부피가 감소합니다. 결과 pV 그래프는 쌍곡선입니다.

pV 등온선은 고온 및 저압에서 쌍곡선입니다. 가스를 냉각시키면 pV 그래프가 쌍곡선에서 벗어납니다.  임계 온도(Tc)에서 pV 곡선은 기울기가 0인 점을 표시합니다. 가스가 더 냉각됨에 따라 pV 곡선은 기울기가 0인 영역을 표시하기 시작합니다. 이 영역 내에서 가스의 부피는 변하지만 압력은 변하지 않습니다. 이 동작은 끓음 및 응축에 해당합니다. 물질이 특정 압력에서 끓는점에 있을 때, 액체의 일부가 기체로 변하면서 부피가 증가하거나(낮은 부피에서 높은 부피로 이동), 일부 기체가 액체로 변하면서(더 높은 부피에서 이동) 감소할 수 있습니다. 볼륨을 낮추기 위해), 온도나 압력의 변화 없이. 이는 기화 또는 액화가 일어나는 영역입니다.

<img alt="Figure1" src="/files/ftp_upload/13669/13669_PT_Figure.svg" style="text-align: center; height: 250px;" />

전이 영역 왼쪽에 있는 곡선의 가파른 부분은 거의 비압축성인 액상을 보여줍니다. 부피가 약간 감소하면 압력이 크게 증가해야 합니다. 평평한 부분은 액체와 기체가 공존할 수 있는 압력과 부피의 조합을 나타내는 액체-기체 전이를 보여줍니다. 전이 영역의 오른쪽에는 기체상이 표시됩니다.

Tc 위의 등온선은 액체-기체 전이를 거치지 않습니다. 그러므로 임계온도인 그 온도 이상에서는 액체가 존재할 수 없습니다. 해당 온도보다 충분히 낮은 압력에서 가스는 액체의 밀도를 가지지만 응축되지는 않습니다. 가스는 초임계 상태라고 합니다.  더 높은 압력에서는 단단합니다. 예를 들어, 이산화탄소는 섭씨 31도 이상의 온도에서는 액체상이 없습니다. 임계압력은 액체가 존재할 수 있는 최대 압력입니다. pV 다이어그램의 임계 압력 및 온도 지점이 임계점입니다.

PV-다이어그램

연구 중인 가스의 압력 대 부피를 표시한 그래프인 pV 다이어그램은 물질의 특정 측면을 설명하는 데 도움이 됩니다. 때 ...

Education

교육

JoVE Core

Physics

물리학

Unit 1

제1단원

The Kinetic Theory of Gases

기체 분자 운동론

KEY TERMS AND CONCEPTS

주요 용어 및 개념

liquid-gas changes on pv curves

pV curves show how gas pressure changes with volume. A pV diagram is a graph of pressure versus volume for the gas being studied. It helps describe how the substance behaves. When the gas acts like an ideal gas, the ideal gas equation gives the link between pressure and volume.

A common pV curve is an isotherm, which is a line drawn at fixed temperature and fixed number of molecules. For an ideal gas, pressure times volume stays constant. That means volume goes down as pressure goes up. The curve is a hyperbola, especially at high temperatures and low pressures.

As the gas is cooled, the curve no longer stays perfectly hyperbolic. At the critical temperature, Tc, the pV curve reaches a point with zero slope. Cooling farther creates a flat region where the volume can change without changing the pressure. This is the part of the curve where boiling and condensation occur.

In this transition region, a substance can expand as liquid changes into gas or contract as gas changes into liquid. The temperature and pressure stay the same during this change. To the left of the transition region, the curve is steep. This shows the liquid phase, which is almost incompressible, so a small decrease in volume needs a large increase in pressure.

The flat part of the curve represents liquid and gas coexisting. To the right of this region, the curve shows the gas phase. Isotherms above Tc do not pass through the liquid-gas transition. That is why liquid cannot exist above the critical temperature. At low enough pressure above Tc, the gas can have the density of a liquid but still not condense. This is called a supercritical gas. At higher pressure, the substance is solid. Carbon dioxide is one example, because it has no liquid phase above 31 degrees Celsius. The critical pressure is the highest pressure at which the liquid can exist, and the point at the critical pressure and critical temperature is the critical point.

Liquid-Gas Changes on pV Curves

equation of state

Gas Behavior in the Equation of State

The equation of state describes how a gas’s pressure, volume, temperature, and number of moles are related. These macroscopic properties help define the condition, or state, of the matter in a thermodynamics system. The relationship between these quantities can be written as a simple mathematical expression. In some cases, it is too complex to express in a formula. Even then, the link between the quantities still exists. When an equation of state cannot be written mathematically, scientists...

ideal gas equation

Gas Laws Behind the Ideal Equation

The ideal gas equation links pressure, volume, temperature, and amount of gas. It describes a hypothetical gas and is built from four empirical gas laws: Boyle’s law, Charles’s law, Avogadro’s law, and Gay-Lussac’s law. When these proportionalities are combined, they give one constant called the universal gas constant. This gas constant has the same value for all real gases under certain conditions. In chemical calculations, that constant is used in the ideal gas equation. The equation works...

van der waals equation

How Real Gases Deviate from Ideal Behavior

Real gases often deviate from the ideal gas law, especially at low temperatures and high pressures. The van der Waals equation improves the ideal gas model by adding two corrections that account for these real-world effects. One correction accounts for attractive forces between molecules. These forces become stronger at higher densities and lower the measured pressure, so the equation adds a pressure term based on the square of the molar density and a positive constant a. The second...

pv-diagrams

pV curves show how gas pressure changes with volume. A pV diagram is a graph of pressure versus volume for the gas being studied. It helps describe how the substance behaves. When the gas acts like an ideal gas, the ideal gas equation gives the link between pressure and volume. A common pV curve is an isotherm, which is a line drawn at fixed temperature and fixed number of molecules. For an ideal gas, pressure times volume stays constant. That means volume goes down as pressure goes up. The...

kinetic theory of an ideal gas

Avogadro's Number and Gas Particle Motion

Avogadro's number and gas particle motion help explain how gases behave at the particle level. A mole is the amount of a substance that contains as many molecules as there are atoms in exactly 12 grams of carbon-12. This idea came from Amedeo Avogadro, who proposed that equal volumes of gas at the same pressure and temperature contain equal numbers of molecules, no matter what the gas is. Avogadro's number is the number of molecules in one mole. Its value is 6.02 × 10^23 mol−1. This number...

molecular kinetic energy

Gas Pressure and Molecular Motion

Gas pressure comes from the motion of molecules in a container. The word gas came from a Flemish word meaning “chaos,” and J. B. van Helmont first used it to describe vapors. In a gas, molecules move in a continuous and random way. When a molecule hits a container wall, its velocity changes. The part of the velocity parallel to the wall stays the same. The part perpendicular to the wall reverses direction, but its size does not change. If the molecule’s velocity changes in the x-direction, its...

distribution of molecular speeds

Molecular Speed Curves and Vapor Pressure

Molecular speed curves show how the speeds of gas particles are spread out at a given temperature. For a gas with many molecules, this spread is predictable even though each molecule moves randomly in direction and speed. The pattern is called the Maxwell-Boltzmann distribution. Liquids have a similar speed distribution, but it is not exactly the same as in gases. This difference helps explain boiling and vapor pressure. A molecule must reach at least a certain speed, v a, to escape from the...

maxwell-boltzmann distribution: problem solving

maxwell-boltzmann-distribution-problem-solving

Maxwell-Boltzmann Gas Speed Ratio

The Maxwell-Boltzmann distribution describes how molecular speeds are spread in a gas. Even though individual molecules move in random directions, the whole gas has a predictable speed pattern. This distribution is written as f(v), where v is molecular speed. The distribution function is used to find the expected number of particles with speeds between v1 and v2. Because N is dimensionless, f(v) has units of seconds per meter. The relationship can also be written in differential form for speed...

phase diagram

Water Phase Changes on a Pressure Chart

Water phase changes can be mapped on a pressure and temperature chart called a phase diagram. These plots show which phase a substance is in at different conditions. They also reveal where phase transitions happen, because the boundary lines mark the temperatures and pressures where two phases coexist. The water phase diagram shows how pressure affects boiling. As pressure rises, the boiling temperature increases gradually until it reaches 374 °C at 218 atm. A pressure cooker works this way.

mean free path and mean free time

Gas collisions: path length and time

Gas collisions in a cylinder help explain the mean free path and mean free time. Gas molecules move in random motion. They collide with each other and change speed and direction. The mean free path is the average path length between collisions. The mean free path depends on how many molecules are packed into a volume. It varies inversely with density. When more molecules are present, collisions happen more often, so the mean free path becomes shorter. It also depends on molecule size. Larger...

heat capacity: problem-solving

Heat Capacity of Gases by Degrees of Freedom

Heat capacity of gases depends on the gas type and the motion of its molecules. It is the amount of heat energy needed to raise the temperature of a unit mass of gas by one degree Celsius. This thermodynamic property is important in science and industry. To solve heat capacity problems, first identify the gas. A gas's molecular structure affects its heat capacity because the molecules have different degrees of freedom. These values can be found from tables or from empirical equations. Next,...

dalton's law of partial pressure

Gas Mixtures and Their Partial Pressures

Gas mixtures have a total pressure that comes from the partial pressures of each gas. A partial pressure is the pressure one gas would make if it filled the whole container by itself. This idea helps explain how gases behave when they are mixed together. When two or more gases share a container, their molecules move randomly and collide with one another. If the gases are at the same temperature, they reach thermal equilibrium. Their molecules then have the same average kinetic energy. In that...

escape velocities of gases

Why Lighter Gases Escape Earth First

Earth’s escape velocity is the speed an object needs to leave gravity behind. Near the top of the atmosphere, about 100 km above Earth, that speed is 11.1 km/s. Gas molecules can escape only if their speeds become high enough to reach that limit. The chance of escape depends on gas temperature and molecular speed. According to kinetic theory, the average kinetic energy of gas molecules is proportional to temperature. As temperature rises, the rms speed, or root-mean-square speed, also rises.

key terms and concepts

Explore how pV curves show ideal gas behavior, boiling, condensation, the critical point, and why carbon dioxide has no liquid phase above 31°C.

Liquid-Gas Changes on pV Curves | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Florida Department of Education

Physical Science

SC.912.P.12

SC.912.P.12.10

Georgia Standards of Excellence

9-12

SC5.

gas-laws-pressure-volume-temperature-and-moles

Gas Laws: Pressure, Volume, Temperature, and Moles

formula-mass-and-mole-concepts-of-compounds

Formula Mass and Mole Concepts of Compounds

Formula Mass of Covalent Compounds

Chemical formulas represent the elemental makeup of substances. For covalent compounds, the formula represents the ...

Expressing Solution Concentration

A solute is a component of a solution that is typically present at a much lower concentration than the solvent. Solute concentrations are often described ...

determining-the-mass-percent-composition-in-an-aqueous-solution

Determining the Mass Percent Composition in an Aqueous Solution

Source: Laboratory of Dr. Neal Abrams &#8212; SUNY College of Environmental Science and Forestry
Determining the composition of a solution is an important ...

Solutions and Concentrations

Source: Laboratory of Dr. Michael Evans &#8212; Georgia Institute of Technology
A solution is a homogeneous mixture containing some components in small ...

Reaction Stoichiometry

A balanced chemical equation provides a great deal of information in a very succinct format. Chemical formulas provide the identities of the reactants and ...

stoichiometry-product-yield-and-limiting-reactants

Stoichiometry, Product Yield, and Limiting Reactants

Chemical equations represent how a chemical reaction proceeds from reactants to products through physical or chemical change using chemical formulas.
...

Understand and be prepared to use values specific to chemical processes: the mole, molar mass, molarity, and percent composition. EXPLANATION: During the early and mid-1800s, a tremendous amount of early research poured into building an understanding of the way that atoms combine. This work required analysis of the percent composition of different substances. Joseph Proust's work with tin oxides led him to publish his law of definite proportions noting that a given pure substance will have a constant ratio for the combination of elements making up the substance. Building on Proust's work, John Dalton published his law of multiple proportions and atomic theory noting that multiple patterns exist for the way that atoms combine, yet the combining atoms are invariable. Meanwhile Amedeo Avogadro hypothesizes that given equal pressures and temperatures, two equal volumes of gas will contain equal numbers of atoms. Acknowledging that the exact number of atoms was unknown in these gaseous volumes, the Latin word "mole" was used. "Mole" translates to "lump" recognizing the ambiguous quantity of gas. A number of attempts have been undertaken historically to quantify the mole. Robert Millikan's oil drop experiment revealed the change of a single electron, which could then be divided into Faraday's Constant for the charge of a mole of electrons. Dividing the charge of a mole of electrons by the charge of a single electron yields the number of electrons in a mole, $6.022\times10^{\wedge}23$. Students should be familiar with how to translate between the given quantities. Student's first use atomism/Dalton's atomic theory in third grade noting that matter is made up of particles too small to be seen. This the first time where students will undertake the process of counting these invisible particles. Electrolysis of water provides a tangible experience to demonstrate the constituent parts of water, though the definite proportions of water may not be easily seen due to the solubility of the gasses produced. The concept of relative mass can be explored by comparing small groups of like items. For example, relative masses of beans can be compared with pinto, white, and black beans. If bags are created with equal numbers of like beans, students can develop a concept of why the smallest bean will have a relative mass of 1, analogous to hydrogen.

CHEM1.PS1.1

Chemical Equations

Chemical equations represent the identities and relative quantities of substances involved in a chemical reaction. The substances undergoing reaction are ...

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Chemical Reactions

A chemical reaction is a process by which the bonds in the atoms of substances are rearranged to generate new substances. Matter cannot be created or ...

Balancing Redox Equations

Electrochemistry is the science involved in the interconversion of electrical and chemical reactions. Such reactions are called reduction-oxidation, or ...

Demonstrate that atoms, and therefore mass, are conserved during a chemical reaction by balancing chemical reactions. EXPLANATION: Standard 7.PS1.4 explores the idea that chemical reactions are rearrangements of atoms, and students undertake the process of balancing chemical reactions with that standard in seventh grade. The introduction of molar masses in high school makes an explicit connection between the number of atoms, as previously investigated, and the actual masses of the atoms, permitting the collection of more concrete evidence for the conservation of mass in chemical reactions.

CHEM1.PS1.2

Reaction Yield

The theoretical yield of a reaction is the amount of product estimated to form based on the stoichiometry of the balanced chemical equation. The ...

A balanced chemical equation provides the information of chemical formulas of the reactants and products involved in the chemical change. A ...

Limiting Reactant

The relative amounts of reactants and products represented in a balanced chemical equation are often referred to as stoichiometric amounts. However, in ...

chemical-equilibria-systematic-approach-to-equilibrium-calculations

Chemical Equilibria: Systematic Approach to Equilibrium Calculations

In systems with multiple equilibria, the equilibrium calculations use a systematic approach involving a series of steps to make sure there are as many ...

Perform stoichiometric calculations involving the following relationships: mole- mole; mass-mass; mole-mass; mole- particle; and mass- particle. Show a qualitative understanding of the phenomenon of percent yield, limiting, and excess reagents in a chemical reaction through pictorial and conceptual examples. (states of matter liquid and solid; excluding volume of gasses). EXPLANATION: This standard builds on the idea that balancing chemical reactions provides evidence for conservation of mass and that the behavior of atoms follows predictable patterns. Students now have the opportunity to utilize this understanding as they perform and evaluate chemical reactions. (The concepts of limiting reagent and percent yield are presented; however, students are not expected to determine these values algebraically. Use of molar volume in stoichiometric processes is beyond the scope of this standard.)

CHEM1.PS1.3

Predicting Reaction Outcomes

Kinetics describes the rate and path by which a reaction occurs. In contrast, thermodynamics deals with state functions and describes the properties, ...

Introduction to Chemical Reactions

All chemical reactions begin with a reactant, the general term for one or more substances entering the reaction. Sodium and chloride ions, for example, ...

Chemical Reactions in Aqueous Solutions

Chemical substances interact in many different ways. Certain chemical reactions exhibit common patterns of reactivity. Due to the vast number of chemical ...

Precipitation Reactions

In a precipitation reaction, aqueous solutions of soluble salts react to give an insoluble ionic compound &#x2013; the precipitate. The reaction occurs ...

Oxidation-Reduction Reactions

Oxidation&ndash;Reduction Reactions

Earth&rsquo;s atmosphere contains about 20% molecular oxygen, O2, a chemically reactive gas that plays an essential ...

Oxidation Numbers

In redox reactions, the transfer of electrons occurs between reacting species. Electron transfer is described by a hypothetical number called the ...

Acids, Bases and Neutralization Reactions

An acid-base reaction is one in which a hydrogen ion, H+, is transferred from one chemical species to another. Such reactions are of central importance to ...

Synthesis and Decomposition Reactions

Synthesis and decomposition are two types of redox reactions. Synthesis means to make something, whereas decomposition means to break something. The ...

types-of-chemical-reactions-exchange-and-reversible

Types of Chemical Reactions: Exchange and Reversible

An exchange reaction is a chemical reaction in which both synthesis and decomposition occur, chemical bonds are both formed and broken, and chemical ...

Use the reactants in a chemical reaction to predict the products and identify reaction classes (synthesis, decomposition, combustion, single replacement, double replacement). EXPLANATION: Chemical reactions are rearrangements of atoms that follow predicable patterns. There are patterns both at the macroscopic level in the behavior of some of the reaction classes, as well as patterns in the rearrangements of the atoms underlying the reaction. Students should be able to predict the products of the reactions, which also requires the ability to recognize the general patterns for each type of reaction.

CHEM1.PS1.4

kinetic-molecular-theory-gas-laws-explain-properties-gas

Kinetic Molecular Theory and Gas Laws Explain Properties of Gas Molecules

The test of the kinetic molecular theory (KMT) and its postulates is its ability to explain and describe the behavior of a gas. The various gas laws ...

basic-postulates-kinetic-molecular-theory-particle-size-energy

Basic Postulates of Kinetic Molecular Theory: Particle Size, Energy, and Collision

The ideal-gas equation, which is empirical, describes the behavior of gases by establishing relationships between their macroscopic properties. For ...

Ideal Gas Law

Derivation of the Ideal Gas Law
Gases are a fundamental state of matter. A gas is a collection of molecules that have a significant distance between their ...

gas-laws-boyle-s-gay-lussac-charles-avogadro-s-and-ideal-gas-law

Gas Laws: Boyle's, Gay-Lussac, Charles', Avogadro's, and Ideal Gas Law

Through experiments, scientists established the mathematical relationships between pairs of variables, such as pressure and temperature, pressure and ...

kinetic-molecular-theory-molecular-velocities-temperature-kinetic

Kinetic Molecular Theory: Molecular Velocities, Temperature, and Kinetic Energy

The kinetic molecular theory qualitatively explains the behaviors described by the various gas laws. The postulates of this theory may be applied in a ...

Kinetic Theory of an Ideal Gas

A mole is defined as the amount of any substance that contains as many molecules as there are atoms in exactly 12 grams of carbon-12. An Italian scientist ...

applications-of-the-ideal-gas-law-molar-mass-density-and-volume

Applications of the Ideal Gas Law: Molar Mass, Density, and Volume

The volume occupied by one mole of a substance is its molar volume. The ideal gas law, PV = nRT, &nbsp;suggests that the volume of a given quantity of gas ...

Conduct investigations to explore and characterize the behavior of gasses (pressure, volume, and temperature), develop models to represent this behavior, and construct arguments to explain this behavior. Evaluate the relationship (qualitative and quantitatively) at STP between pressure and volume (Boyle's Law), temperature and volume (Charles' Law), temperature and pressure (Gay-Lussac Law) and moles and volume (Avogadro's Law), and evaluate and explain these relationships with respect to kinetic molecular theory. Be able to understand, establish, and predict the relationships between volume, temperature, and pressure using combined gas law both qualitatively and quantitatively. EXPLANATION: When exploring the behavior of gasses, it is important to consider experimental design. Experiments used to show the relationships between these sets of variables should include one independent and one dependent variable. Other variables should be held constant. Pressure should serve as the dependent variable because it cannot be manipulated directly. Avogadro's Law can be used to relate the amount of gas in two different containers in lieu of knowing actual number of gas particles in an individual container. Individual demonstrations can be performed to explore each of the different gas laws.

CHEM1.PS1.5

Ideal Gas Equation

The ideal gas equation is an equation of state that relates the state variables pressure, volume, temperature, and the number of moles of a hypothetical ...

Source: Laboratory of Dr. Andreas Z&#252;ttel - Swiss Federal Laboratories for Materials Science and Technology
The ideal gas law describes the behavior ...

real-gases-effects-intermolecular-forces-molecular-volume-deriving

Real Gases: Effects of Intermolecular Forces and Molecular Volume Deriving Van der Waals Equation

Thus far, the ideal gas law, PV = nRT, has been applied to a variety of different types of problems, ranging from reaction stoichiometry and empirical and ...

chemical-stoichiometry-gases-using-ideal-gas-law-to-determine

Chemical Stoichiometry and Gases: Using Ideal Gas Law to Determine Moles

Chemical stoichiometry describes the quantitative relationships between reactants and products in chemical reactions.

In addition to measuring quantities ...

The pV diagram, which is a graph of pressure versus volume of the gas under study, is helpful in describing certain aspects of the substance. When the ...

Use the ideal gas law, PV = nRT, to algebraically evaluate the relationship among the number of moles, volume, pressure, and temperature for ideal gases. EXPLANATION: If students have collected data during investigations for CHEM1.PS1.5, these data can then be used to linearize. With pressure assigned as the dependent variable and plotted against (moles) (temperature)/volume, the slope of the graph will be the gas constant, yielding the ideal gas law. After developing the mathematical model, this model can be used to make predictions for other systems.

Separation of Mixtures via Precipitation

Source: Laboratory of Dr. Ana J. Garc&#237;a-S&#225;ez &#8212; University of T&#252;bingen
Most samples of interest are mixtures of many different ...

States of Matter and Phase Changes

The internal energy of a substance&#8212;the total kinetic energy of all its molecules and the potential energy of their associated forces&#8212;depends ...

Distillation: Vapor&ndash;Liquid Equilibria

Distillation is a separation technique that takes advantage of the boiling point properties of disparate elements in a mixture. To perform distillation, ...

Filtration

Filtration is the physical separation of solids from a fluid using a filtration medium.
The filtration medium is chosen depending on the purpose of ...

Centrifugation

Centrifugation is a method of separating suspended particles from a liquid by spinning in a centrifuge at a high number of revolutions per minute.
...

Sublimation

Sublimation is the direct phase transformation from the solid to the gaseous phase, bypassing the liquid state.
For example, solid carbon dioxide, or dry ...

recrystallization-solidsolution-equilibria

Recrystallization: Solid&ndash;Solution Equilibria

Recrystallization is a purification technique used to separate impurities from solid compounds. In this technique, no chemical reactions occur. Instead, ...

Precipitation and Co-precipitation

Precipitation and coprecipitation techniques can be applied to separate a mixture of ions.
When different ions form sparingly soluble salts with the same ...

Electrodeposition

During electrodeposition, ions are separated from a solution by deposition on an electrode in an electrolytic cell.
While reduction occurs at the cathode ...

extraction-partition-and-distribution-coefficients

Extraction: Partition and Distribution Coefficients

The distribution law or Nernst&#39;s distribution law is the law that governs the distribution of a solute between two immiscible solvents. This law, also ...

Extraction: Effects of pH

Consider a weak base,&#160; B, with a partition coefficient, K, between the organic and aqueous phases.&#160;&#160;
While organic bases are usually more ...

Extraction: Advanced Methods

Metal ions can be separated by complexation with organic ligands to form uncharged chelates.
The chelating agent must contain hydrophobic groups and ...

Chromatography: Introduction

Chromatography is a technique used to separate compounds based on differences of partitioning between two phases, the stationary phase and the mobile ...

Dialysis

Dialysis separates desired analyte ions or molecules from unwanted molecules, or &#39;interferents&#39;, by allowing the sample solution to diffuse ...

Analyze solutions to identify solutes and solvents, quantitatively analyze concentrations (molarity, percent composition, and ppm), and perform separation methods such as evaporation, distillation, and/or chromatography and show conceptual understanding of distillation. Construct argument to justify the use of certain separation methods under different conditions. EXPLANATION: In seventh grade, students developed an understanding that chemical and physical properties of a sample of matter could be used to identify a substance. Building on this understanding, students now explore the use of these physical and chemical properties to separate mixtures. Analysis of the substances is performed to aid in further discussion and facilitate further quantitative analysis.

CHEM1.PS1.7

Liquid-Gas Changes on pV Curves

Description

Transcript

Tags

More videos by Standards