Name: electron speed selector in thomson’s tube
Uploaded: 2023-09-18T17:11:19.000Z
Duration: 1 min 19 s
Channel: JoVE

K12 Standards

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

9-12

Chemistry

Structure And Properties Of Matter

Atomic structure

Thomson's e/m Experiment

J. J. Thomson의 실험은 전자의 전하 대 질량 비율을 결정했습니다.
그는 전기장과 자기장이 교차하는 설정을 사용하여 전기장과 자기장의 비율인 특정 속도의 전자만 통과하도록 했습니다.
진공 된 유리관에서 전자는 뜨거운 음극에서 가속되어 음극과 두 양극 사이의 전위차에 의해 빔으로 변환되었습니다.
전자에 의해 얻어진 운동 에너지는 손실된 전위 에너지와 같습니다. 그래서 그는 전자의 속도를 결정했습니다.
속도가 선택된 전자가 형광 스크린에 부딪혀 빛을 냈습니다.
그런 다음 그는 전자의 전하 대 질량 비율을 결정하기 위해 두 방정식을 풀었습니다.
오른쪽의 모든 양은 튜브의 잔류 가스 유형, 음극 물질 또는 실험의 다른 측면과 무관하며, 이는 빔의 전자가 모든 물질의 기본 구성 요소임을 의미합니다.
e/m의 가장 정확하게 계산된 값은 킬로그램당 1.759 x 1011쿨롱입니다.

<ol>
	<li>Young, H.D. 및 Freedman, RA (2012). 현대 물리학을 가진 대학 물리학. 샌프란시스코, 캘리포니아 : 피어슨; 섹션 27.5; 896–897쪽.</li>
</ol>

톰슨의 e/m 실험

가열된 음극에 의해 생성된 하전 입자 빔에서 입자는 서로 다른 속도로 움직입니다. 그러나 많은 응용 분야에서는 입자 속도가 균일한 빔이 필요합니다. 속도 선택기로 알려진 배열은 전기장과 자기장을 사용하여 빔에서 특정 속도의 입자를 선택합니다.

전하 q, 속도 v, 질량 m을 가진 입자가 자기장과 전기장이 있는 위쪽 영역으로 들어갑니다. 입자의 움직임과 서로 수직입니다. 자기장은 종이 평면에 있는 반면, 전기장 E은 왼쪽에 있습니다. 전하 q가 양수이면 자기력은 qvB 크기로 오른쪽을 향하고, 전기력은 qE 크기로 왼쪽을 향합니다. . 두 힘은 v의 특정 값에 대해 주어진 전계 강도 E 및 B에 대해 강도가 동일합니다. 여기서 총 힘은 0입니다. , 제공:

<img alt="Equation1" src="/files/ftp_upload/14197/14197_Equation_1.png" style="text-align: center; height: 40px;" />

J. J. Thomson(1856~1940)은 19세기 말 고전 물리학 실험 중 하나에서 전자의 전하 대 질량 비율을 결정하기 위해 이 개념을 사용했습니다. 고도로 진공화된 유리 용기에 있는 두 개의 양극과 음극 사이의 전압 차이는 뜨거운 음극 전자 빔을 가속화하고 형성합니다. 가속 전위 V는 전자' 속도 v. 잃어버린 전기 위치 에너지는 얻은 운동 에너지와 같습니다.

E/B와 같은 속도를 가진 전자만이 교차된 전기장과 자기장을 똑바로 통과하여 충격 지점에서 빛나는 형광 스크린에 부딪힐 수 있습니다.

전자의 전하 대 질량 비율은 다음과 같이 계산됩니다.

<img alt="Equation2" src="/files/ftp_upload/14197/14197_Equation_2.png" style="text-align: center; height: 42px;" />

값은 다음과 같이 결정됩니다.

<img alt="Equation3" src="/files/ftp_upload/14197/14197_Equation_3.png" style="text-align: center; height: 34px;" />

Thomson이 이 숫자에 대해 단 하나의 값만 발견했다는 사실은 그의 측정의 필수적인 특징이었습니다. 음극 물질, 튜브에 남아 있는 가스 또는 실험의 다른 측면은 아무런 영향을 미치지 않았습니다. 이러한 독립성은 현재 전자로 알려진 빔의 구성 입자가 모든 물질의 구성 요소임을 입증했습니다. 그 결과 톰슨은 전자를 최초의 기본 입자이자 진정한 기본 입자로 발견한 공로를 인정받았습니다.

미국 과학자 로버트 밀리컨(Robert Millikan)은 톰슨의 연구 이후 15년이 지나서 전자의 전하를 정확하게 측정할 수 있었습니다. 이 숫자와 전하 대 질량 비율을 통해 전자의 질량을 계산할 수 있었습니다. 현재 얻을 수 있는 가장 정확한 값은 다음과 같습니다.

<img alt="Equation4" src="/files/ftp_upload/14197/14197_Equation_4.png" style="text-align: center; height: 20px;" />

가열된 음극에 의해 생성된 하전 입자 빔에서 입자는 서로 다른 속도로 움직입니다. 그러나 많은 응용 분야에는 균일한 빔이 필요합니다.

Education

교육

JoVE Core

Physics

물리학

Unit 1

제1단원

Magnetic Forces and Fields

자기력과 자기장

KEY TERMS AND CONCEPTS

주요 용어 및 개념

electron speed selector in thomson’s tube

A velocity selector uses electric and magnetic fields to choose charged particles with one speed from a beam. Many beams from a heated cathode contain particles moving at different speeds, so this setup helps produce a uniform beam. The electric and magnetic fields are perpendicular to the particle’s motion and to each other.

In this arrangement, a particle with charge q, speed v, and mass m enters from the top. The magnetic field points into the plane of the paper, and the electric field points to the left. For a positive charge, the magnetic force acts to the right with magnitude qvB, while the electric force acts to the left with magnitude qE. The two forces cancel when the speed has a specific value, given by E/B, so the total force becomes zero.

J. J. Thomson used this idea to measure the electron’s charge-to-mass ratio in a classic physics experiment from the end of the 19th century. In a highly evacuated glass container, a voltage difference between the anodes and cathodes accelerates hot cathode electrons and shapes them into a beam. The accelerating potential V sets the electrons’ speed, and the lost electric potential energy becomes kinetic energy. Only electrons moving at speed E/B pass straight through the crossed electric and magnetic fields and strike a fluorescent screen, which glows at the impact point.

Thomson calculated the electron’s charge-to-mass ratio from this beam. A key result was that he found only one value for this number. It did not depend on the cathode material, the remaining gas in the tube, or other details of the setup. That independence showed that the particles in the beam, now called electrons, are part of all matter. For that reason, Thomson is credited with discovering the electron as the first elementary and truly fundamental particle. About 15 years later, Robert Millikan measured the electron’s charge with high precision. Together with Thomson’s charge-to-mass ratio, this made it possible to calculate the electron’s mass.

Electron Speed Selector in Thomson’s Tube

magnetism

Magnetic Poles and Everyday Uses

Magnetism appears in many everyday objects, from toys and hangers to elevators, doorbells, and computer devices. Magnets have two poles, called north and south. Like poles repel each other, while unlike poles attract. Both poles can also attract unmagnetized iron. A single magnetic pole cannot be isolated, because every part of a magnet contains both a north pole and a south pole. A compass needle is a simple example of a magnet. It is a thin bar magnet suspended at its center, so it can turn...

magnetic fields

Magnetic Force on Moving Charges

Magnetic force on moving charges depends on motion, charge, and field direction. A moving charge or a current creates a magnetic field in the space around it, along with its electric field. That magnetic field can then push on other moving charges or currents in the field. A magnetic field is a vector field, so it has direction as well as strength. At any point, the field direction is the direction a compass needle’s north pole points. The field strength is defined from the force a charged...

magnetic field lines

Reading Magnetic Field Lines

Magnetic field lines show the direction and strength of a magnetic field. They make it easier to picture how a magnet acts in space. Each line forms a closed loop around the magnet. For a bar magnet, the field lines leave the north pole and curve around to the south pole. They then continue through the magnet back to the north pole. This loop has no beginning or end. Magnetic field lines follow clear rules. The magnetic field points tangent to a field line at any point. A small compass points...

magnetic flux

Magnetic Flux Through Surfaces

Magnetic flux through a surface describes how much magnetic field passes across that surface. It is measured in weber (Wb), the SI unit for magnetic flux. Magnetic flux is a scalar quantity, not a vector. Three factors shape magnetic flux. They are the magnetic field strength B, the area the field crosses, and the orientation of the field relative to the surface. For a small area element dA, the flux depends on the part of the magnetic field that is normal, or perpendicular, to that element at...

motion of a charged particle in a magnetic field

motion-of-a-charged-particle-in-a-magnetic-field

Charged Particle Paths in Magnetic Fields

A charged particle in a magnetic field follows a path that depends on the direction of its velocity. When the field is uniform and the particle moves perpendicular to it, the magnetic field is the main factor that controls the motion, especially in a vacuum. The magnetic force is always perpendicular to the direction of motion, so the particle curves into a circle. Because the force stays perpendicular to velocity, it does no work on the particle. The kinetic energy and speed stay constant...

magnetic force

Magnetic Fields and Moving Charges

Magnetic fields and moving charges create magnetic force. A moving electric charge, or a current made of many moving charges, produces a magnetic field. When another current or moving charge enters that field, it feels a magnetic force in response. At the atomic level, magnetic forces come from interactions between moving electrons in the atoms of two bodies. The strength of magnetic force depends on several factors. It increases with the size of the charge and with the strength of the...

magnetic force on a current-carrying conductor

magnetic-force-on-a-current-carrying-conductor

Current and Magnetic Field Around a Wire

A current-carrying wire creates a magnetic field around it, and moving charges feel a force in that field. Because the magnetic field produced by moving charges is proportional to current, the wire itself acts as a source of magnetic field. A compass placed near the wire shows this effect by lining up tangentially around the wire. The magnetic field around a straight wire forms concentric circular loops. The right-hand rule helps determine the direction of those loops. If the thumb points in...

magnetic force on current-carrying wires: example

magnetic-force-on-current-carrying-wires-example

Balancing Weight with Magnetic Force

Magnetic force can balance the weight of a current-carrying wire when the wire sits in a magnetic field. Moving charges in the wire feel a force, so the wire itself can be pushed upward or downward. This example uses a flexible wire that is 40 cm long and has a mass of 10 g. It is held in a horizontal position inside a constant 0.40 T magnetic field. The goal is to find the current needed to remove the tension in the supporting leads. To do that, a free-body diagram is drawn first. The diagram...

force on a current loop in a magnetic field

force-on-a-current-loop-in-a-magnetic-field

Current Loops and Torque in Motors

Current loops in a magnetic field create the torque that drives a DC motor. A DC motor converts electrical energy into mechanical work. In a motor, wire loops sit inside a magnetic field. When current flows through the loops, the magnetic field pushes on them and makes the shaft rotate. The current is reversed when the loop lines up with the magnetic field. This keeps the torque on the loop going in the same direction. A commutator and brushes handle this reversal. The commutator switches the...

torque on a current loop in a magnetic field

torque-on-a-current-loop-in-a-magnetic-field

Current Loop Torque in Electric Motors

Current loop torque in electric motors shows how magnetic force can make a wire loop rotate. In an electric motor, loops of wire sit between magnets in a magnetic field. When current flows through the loops, the field applies torque. This rotation turns a shaft and converts electrical energy into mechanical energy. A rectangular current-carrying loop with N turns in a uniform magnetic field has zero net force. Even so, it can still experience net torque. The torque depends on the current I,...

the hall effect

Hall Voltage and Charge Carriers

Hall voltage and charge carriers are explained through Edwin H. Hall’s 1879 experiment. His setup helped identify the polarity of the main charge carriers in a conducting material. It also showed, for the first time, that the charge carriers in most metals are negative. A metal slab is placed in a constant magnetic field. The electrons move from right to left, so the magnetic force pushes them toward the top edge of the slab. This leaves excess negative charge at the top and excess positive...

thomson's e/m experiment

A velocity selector uses electric and magnetic fields to choose charged particles with one speed from a beam. Many beams from a heated cathode contain particles moving at different speeds, so this setup helps produce a uniform beam. The electric and magnetic fields are perpendicular to the particle’s motion and to each other. In this arrangement, a particle with charge q, speed v, and mass m enters from the top. The magnetic field points into the plane of the paper, and the electric field...

key terms and concepts

Explore how crossed electric and magnetic fields select electron speed, how Thomson measured the electron charge-to-mass ratio, and why the result proved electrons are universal.

Electron Speed Selector in Thomson’s Tube | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

The Bohr Model

Following the work of Ernest Rutherford and his colleagues in the early twentieth century, the picture of atoms consisting of tiny dense nuclei surrounded ...

The Quantum-Mechanical Model of an Atom

Shortly after de Broglie published his ideas that the electron in a hydrogen atom could be better thought of as being a circular standing wave instead of ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

Quantum Numbers

It is said that the energy of an electron in an atom is quantized; that is, it can be equal only to certain specific values and can jump from one energy ...

Atomic Orbitals

An atomic orbital represents the three-dimensional regions in an atom where an electron has the highest probability to reside. The radial distribution ...

The Pauli Exclusion Principle

The arrangement of electrons in the orbitals of an atom is called its electron configuration. We describe an electron configuration with a symbol that ...

The Energies of Atomic Orbitals

In an atom, the negatively charged electrons are attracted to the positively charged nucleus. In a multielectron atom, electron-electron repulsions are ...

The Aufbau Principle and Hund's Rule

To determine the electron configuration for any particular atom, we can build the structures in the order of atomic numbers. Beginning with hydrogen, and ...

electron-configuration-of-multielectron-atoms

Electron Configuration of Multielectron Atoms

The alkali metal sodium (atomic number 11) has one more electron than the neon atom. This electron must go into the lowest-energy subshell available, the ...

In a beam of charged particles created by a heated cathode, the particles move at different speeds. However, many applications need a beam with uniform ...

Atomic structure
• Evolution of atomic models/theory
• Electrons
• Electron configurations

Content elaboration: Physical Science included properties and locations of protons, neutrons and electrons, atomic number, mass number, cations and anions, isotopes and the strong nuclear force which holds the nucleus together. In this course, the historical development of the atomic model and the positions of electrons are explored in greater detail. Atomic models are constructed to explain experimental evidence and make predictions. The changes in the atomic model over time exemplify how scientific knowledge changes as new evidence emerges and how technological advancements like electricity extend the boundaries of scientific knowledge. Thompson's study of electrical discharges in cathode-ray tubes led to the discovery of the electron and the development of the plum pudding model of the atom. Rutherford's experiment, in which he bombarded gold foil with a-particles, led to the discovery that most of the atom consists of empty space with a relatively small, positively charged nucleus. Bohr used data from atomic spectra to propose a planetary model of the atom in which electrons orbit the nucleus, like planets around the sun. Later, Schrödinger used the idea that electrons travel in waves to develop a model in which electrons travel randomly in regions of space called orbitals (quantum mechanical model). Based on the quantum mechanical model, it is not possible to predict exactly where electrons are located but there is a region of space surrounding the nucleus in which there is a high probability of finding an electron (electron cloud or orbital). Data from atomic spectra (emission and absorption) gives evidence that electrons can only exist at certain discrete energy levels and not at energies between these levels. Atoms are usually in the ground state where the electrons occupy orbitals with the lowest available energy. However, the atom can become excited when the electrons absorb a photon with the precise amount of energy (indicated by the frequency of the photon) to move to an orbital with higher energy. Any photon without this precise amount of energy will be ignored by the electron. The atom exists in the excited state for a very short amount of time. When an electron drops back down to the lower energy level, it emits a photon that has energy equal to the energy difference between the levels. The amount of energy is indicated by the frequency of the light that is given off and can be measured. Each element has a unique emission and absorption spectrum due to its unique electron configuration and specific electron energy jumps that are possible for that element. Being aware of the quantum mechanical model as the currently accepted model for the atom is important for science literacy as it explains and predicts subatomic interactions, but details should be reserved for more advanced study. Electron energy levels consist of sublevels (s, p, d and f), each with a characteristic number and shape of orbitals. Orbital diagrams and electron configuration can be constructed to show the location of the electrons in an atom using established rules. Valence electrons are responsible for most of the chemical properties of elements. In this course, electron configuration (extended and noble gas notation) and orbital diagrams can be shown for any element in the first three periods. Although the quantum mechanical model of the atom explains the most experimental evidence, other models can still be helpful. Thinking of atoms as indivisible spheres is useful in explaining many physical properties of substances, such as the state (solid, liquid or gas) of a substance at room temperature. Bohr's planetary model is useful to explain and predict periodic trends in the properties of elements.

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

atomic-radii-and-effective-nuclear-charge

Atomic Radii and Effective Nuclear Charge

The elements in groups of the periodic table exhibit similar chemical behavior. This similarity occurs because the members of a group have the same number ...

Ionic Radii

Ionic radius is the measure used to describe the size of an ion. A cation always has fewer electrons and the same number of protons as the parent atom; it ...

Ionization Energy

The amount of energy required to remove the most loosely bound electron from a gaseous atom in its ground state is called its first ionization energy ...

Electron Affinity

The electron affinity (EA) is the energy change for adding an electron to a gaseous atom to form an anion (negative ion).



This process can be either ...

Alkali Metals

Group 1 elements are soft and shiny metallic solids. They are malleable, ductile, and good conductors of heat and electricity. The melting points of the ...

Halogens

Group 17 elements, known as halogens, are nonmetals. At room temperature, fluorine and chlorine are gases, bromine is a liquid, and iodine a solid. ...

Noble Gases


The elements in group 18 are noble gases (helium, neon, argon, krypton, xenon, and radon). They earned the name &ldquo;noble&rdquo; because they were ...

Periodic Table
• Properties
• Trends

Content elaboration: In the Physical Science course, the concept that elements are placed in order of increasing atomic number in the periodic table such that elements with similar properties are placed in the same column is introduced. How the periodic table is divided into groups, families, periods, metals, nonmetals and metalloids is also included and will be revisited here. In this course, with more information about the electron configuration of elements, similarities in the configuration of the valence electrons for a particular group can be observed. The electron configuration of an atom can be determined from the position on the periodic table. The repeating pattern in the electron configuration for elements on the periodic table explains many of the trends in the properties observed. Atomic theory is used to describe and explain trends in properties across periods or down columns including atomic radii, ionic radii, first ionization energies, electronegativities and whether the element is a solid or gas at room temperature. Additional ionization energies, electron affinities and periodic properties of the transition elements, and the lanthanide and actinide series are reserved for more advanced study.

Periodic Table

Types of Chemical Bonds

Chemical bonding theories were pioneered by American chemist Gilbert&#xA0;N. Lewis. He developed a model called the Lewis model to explain the type and ...

Lewis Symbols and the Octet Rule

Chemical bonds are complex interactions between two or more atoms or ions, which reduce the potential energy of the molecule. Gilbert N. Lewis developed a ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&#xA0;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

trends-in-lattice-energy-ion-size-and-charge

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&#xA0;

Electronegativity values of ...

bond-polarity-dipole-moment-and-percent-ionic-character

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Resonance

The Lewis structure of a nitrite anion (NO2&minus;) may actually be drawn in two different ways, distinguished by the locations of the N-O and N=O ...

Formal Charges

In some cases, there are seemingly more than one valid Lewis structures for molecules and polyatomic ions. The concept of formal charges can be used to ...

Exceptions to the Octet Rule

Many covalent molecules have central atoms that do not have eight electrons in their Lewis structures. These molecules fall into three categories:


	...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

VSEPR Theory and the Basic Shapes

Overview of VSEPR Theory

Valence shell electron-pair repulsion theory (VSEPR theory) enables us to predict the molecular structure, including approximate ...

vsepr-theory-and-the-effect-of-lone-pairs

VSEPR Theory and the Effect of Lone Pairs

Effect of Lone Pairs of Electrons&nbsp;on Molecule Geometry

It is important to note that electron-pair geometry around a central atom is not the same ...

Predicting Molecular Geometry

VSEPR Theory for Determination of Electron Pair Geometries

The following procedure uses VSEPR theory to determine the electron pair geometries and the ...

Molecular Shape and Polarity

Dipole Moment of a Molecule

Polar covalent bonds connect two atoms with differing electronegativities, leaving one atom with a partial positive charge ...

Valence Bond Theory

Overview of Valence Bond Theory

Valence bond theory describes a covalent bond as the overlap of half-filled atomic orbitals (each containing a single ...

Hybridization of Atomic Orbitals I

The mathematical expression known as the wave function, &#x3C8;, contains information about each orbital and the wavelike properties of electrons in an ...

Hybridization of Atomic Orbitals II

sp3d and sp3d&nbsp;2 Hybridization

To describe the five bonding orbitals in a trigonal bipyramidal arrangement, we must use five of the valence shell ...

Molecular Orbital Theory I

Overview of Molecular Orbital Theory

Molecular orbital theory describes the distribution of electrons in molecules in the same way as the distribution of ...

Molecular Orbital Theory II

Molecular Orbital Energy Diagrams

The relative energy levels of atomic and molecular orbitals are typically shown in a molecular orbital diagram. For a ...

Bonding in Metals

Metallic bonds are formed between two metal atoms. A simplified model to describe metallic bonding has been developed by Paul Dr&#xFC;de called the ...

Chemical bonding
• lonic
• Polar/covalent

Content elaboration: Content in the Physical Science course included recognizing that atoms with unpaired electrons tend to form ionic and covalent bonds with other atoms, forming molecules, ionic lattices or network covalent structures. In this course, electron configuration, electronegativity values and energy considerations will be applied to bonding and the properties of materials with different types of bonding. Atoms of many elements are more stable when they are bonded to other atoms. In such cases, as atoms bond, energy is released to the surroundings, resulting in a system with lower energy. An atom's electron configuration, particularly the valence electrons, determines how an atom interacts with other atoms. Molecules, ionic lattices and network covalent structures have different, yet predictable, properties that depend on the identity of the elements and the types of bonds formed. Differences in electronegativity values can be used to predict where a bond fits on the continuum between ionic and covalent bonds. The polarity of a bond depends on the electronegativity difference and the distance between the atoms (bond length). Polar covalent bonds are introduced as an intermediary between ionic and pure covalent bonds. The concept of metallic bonding is also introduced to explain many of the properties of metals (e.g., conductivity). Since most compounds contain multiple bonds, a substance may contain more than one type of bond. Carbon atoms can bond together and with other atoms, especially hydrogen, oxygen, nitrogen and sulfur, to form chains, rings and branching networks that are present in a variety of important compounds, including synthetic polymers, fossil fuels and the large molecules essential to life.

Chemical bonding

Chemical Formulas

A chemical formula presents information about the proportions of atoms constituting a particular chemical compound or molecule, mainly using symbols of ...

ionic-compounds-formulas-and-nomenclature

Ionic Compounds: Formulas and Nomenclature

An element composed of atoms that readily lose electrons (a metal) can react with an element composed of atoms that readily gain electrons (a nonmetal) to ...

molecular-compounds-formulas-and-nomenclature

Molecular Compounds: Formulas and Nomenclature

Molecular compounds or covalent compounds result when atoms share electrons to form covalent bonds. Since there is no electron transfer, molecular ...

Organic Compounds

All living things are formed mostly of carbon compounds called organic compounds. The category of organic compounds includes both natural and synthetic ...

Classification of Elements and Compounds

Pure substances consist of only one type of matter. A pure substance can be an element or a compound. An element consists of only one type of atom, while ...

Molecular Models

Physical models representing molecular architectures of chemical compounds play essential roles in understanding chemistry. The use of molecular models ...

Representing compounds
• Formula writing
• Nomenclature
• Models and shapes (Lewis structures, ball and stick, molecular geometries)

Content elaboration: Using the periodic table, formulas of ionic compounds containing specific elements can be predicted. This can include ionic compounds made up of elements from groups 1, 2, 17, hydrogen, oxygen and polyatomic ions (given the formula and charge of the polyatomic ion). Given the formula, a compound can be named using conventional systems that include Greek prefixes and Roman numerals where appropriate. Given the name of an ionic or covalent substance, formulas can be written. Many different models can be used to represent compounds including chemical formulas, Lewis structures, and ball and stick models. These models can be used to visualize atoms and molecules and to predict the properties of substances. Each type of representation provides unique information about the compound. Different representations are better suited for particular substances. Lewis structures can be drawn to represent covalent compounds using a simple set of rules and can be combined with valence shell electron pair repulsion (VSEPR) theory to predict the three-dimensional electron pair and molecular geometry of compounds. Lewis structures and molecular geometries will only be constructed for the following combination of elements: hydrogen, carbon, nitrogen, oxygen, phosphorus, sulfur and the halogens.

Representing compounds

Measurement: Standard Units

Every measurement provides three kinds of information: the size or magnitude of the measurement (a number), a standard of comparison for the measurement ...

Measurement: Derived Units

The International System of Units or SI system, by international agreement, has fixed measurement units for seven fundamental properties: length, mass, ...

uncertainty-in-measurement-accuracy-and-precision

Uncertainty in Measurement: Accuracy and Precision

Scientists typically make repeated measurements of a quantity to ensure the quality of their findings and to evaluate both the precision and the accuracy ...

uncertainty-in-measurement-reading-instruments

Uncertainty in Measurement: Reading Instruments

Counting is the type of measurement that is free from uncertainty, provided the number of objects being counted does not change during the process. Such ...

uncertainty-in-measurement-significant-figures

Uncertainty in Measurement: Significant Figures

All the digits in a measurement, including the uncertain last digit, are called significant figures or significant digits. Note that zero may be a ...

Dimensional Analysis

Dimensional analysis, also known as the factor label method, is a versatile approach for mathematical operations. The main principle behind this approach ...

Elements: Chemical Symbols and Isotopes

A chemical symbol is an abbreviation used to indicate an element or an atom of an element. For example, the symbol for mercury is Hg. The same symbol is ...

Quantifying matter

Content elaboration: In earlier grades, properties of materials were quantified with measurements that were always associated with some error. In this course, scientific protocols for quantifying the properties of matter accurately and precisely are studied. Using the International System of Units (SI), significant digits or figures, scientific notation, error analysis and dimensional analysis are vital to scientific communication. There are three domains of magnitude in size and time: the macroscopic (human) domain, the cosmic domain and the submicroscopic (atomic and subatomic) domain. Measurements in the cosmic domain and submicroscopic domains require complex instruments and/or procedures. Matter can be quantified in a way that macroscopic properties such as mass can reflect the number of particles present. Elemental samples are a mixture of several isotopes with different masses. The atomic mass of an element is calculated given the mass and relative abundance of each isotope of the element as it exists in nature. Because the mass of an atom is very small, the mole is used to translate between the atomic and macroscopic levels. A mole is equal to the number of atoms in exactly 12 grams of the isotope carbon-12. The mass of one mole of a substance is equal to its molar mass in grams. The molar mass for a substance can be used in conjunction with Avogadro's number and the density of a substance to convert between mass, moles, volume and number of particles of a sample.

Quantifying matter

Electron Speed Selector in Thomson’s Tube

Description

Transcript

Tags

More videos by Standards