Name: force, motion, and mechanical effects
Uploaded: 2023-09-22T11:49:19.000Z
Duration: 1 min 25 s
Channel: JoVE

남자가 상자를 당기거나 밀면 수평 방향으로 움직입니다. 상자를 움직이게 하는 당기거나 미는 것을 힘이라고 합니다. 뉴턴으로 표시되는 벡터 수량입니다.
바디에 작용하는 힘은 외부 힘과 내부 힘으로 분류할 수 있습니다. 신체 외부에 가해지는 힘이 효과를 낼 때 이를 외력이라고 하며, 신체 내부에 존재하는 반력을 내력이라고 합니다.
전염성의 원리는 물체에 가해지는 힘의 적용 지점이 변하지만 동일한 작용선에 남아 있으면 물체에 가해지는 결과적인 힘은 변하지 않는다는 것입니다.
강체에 작용하는 두 가지 힘을 생각해 보십시오. 투과성의 원리에 따르면, 신체에 작용하는 힘이 다른 지점에서 작용하더라도 동일한 작용선에 있으면 신체는 변하지 않습니다.
이러한 힘은 같고 반대이기 때문에 그 합은 0과 같고 몸체에 가해지는 힘은 변하지 않습니다.

<ol>
	<li>Meriam, JL, Kraige, LG, 볼턴, JN (2018). Engineering Mechanics \u2012 Statics, New Jersey: John Wiley & Sons. 쪽 – 23-24.</li>
	<li>맥주, F.P.; 존스턴, ER; 마주렉, D.F; 크롬웰, PJ 및 셀프, BP (2019). 엔지니어를 위한 벡터 역학 \u2012 Statics and Dynamics. 뉴욕 : McGraw-Hill. 85쪽 \u2012 86쪽.</li>
</ol>

힘의 소개

노즐에서 터빈 날개로 흐르는 물을 생각해 보겠습니다. 물이 터빈 날개에 닿으면 방향의 흐름을 따라 움직이게 하는 힘을 발휘합니다. 힘은 물체의 움직임, 모양 또는 방향을 바꾸는 충격입니다. 힘은 밀거나 당기는 것과 같은 물리적 접촉이나 자기력이나 중력과 같은 비접촉 상호작용을 통해 발생할 수 있습니다. 힘은 크기와 방향을 모두 갖는 벡터량이며 SI 단위계의 뉴턴(N)으로 측정됩니다. 1m/s2의 가속도로 앞으로 움직이는 질량 1kg의 물체를 생각해 보겠습니다. 이 경우 물체에 가해지는 힘은 1N과 같습니다.
역학에서 외력과 내력은 고려 중인 강체에 작용하여 외부 및 내부 효과를 일으키는 두 가지 유형의 힘입니다. 외부 효과는 물체의 무게, 사람이 가하는 힘, 마찰력과 같은 외부 힘으로 인해 물체가 주변에 가하는 반력입니다. 내부 효과는 물체의 재료 내에서 발생하는 내부 힘과 변형입니다. 외력을 받는 브래킷의 예를 생각해 보겠습니다. 브래킷에 대한 이 힘의 외부 효과는 기초와 볼트가 브래킷에 가하는 반력입니다. 브래킷에 가해지는 힘의 내부 효과는 브래킷 재료 내에서 발생하는 내부 응력과 변형입니다. 이러한 내부 힘과 변형은 브래킷 재료 전체에 분산되며 본체의 재료 특성과 기하학적 구조에 따라 달라집니다.
전달 원리는 동일한 작용선을 따라 가해진 힘의 적용 지점을 이동시키는 효과를 설명하는 개념입니다. 강체에 힘이 가해지고 그 힘의 적용 지점이 변하지만 동일한 작용선에 남아 있으면 몸체에 작용하는 합력은 변하지 않고 유지된다는 것입니다. 서로 다른 지점에서 강체에 작용하는 두 개의 동일한 힘을 고려해봅니다. 전달성의 원리에 따르면 물체에 작용하는 힘은 동일한 작용선에 있으므로 특정 지점에 작용하는 단일 힘과 동일해집니다. 이러한 힘의 적용 지점이 변경되거나 동일한 작용선을 따라 이동할 때 물체에 작용하는 합력은 동일하게 유지됩니다. 동일한 작용선에 작용하는 동일한 힘이기 때문입니다.

노즐에서 터빈 베인으로 흐르는 물을 생각해 보십시오. 물이 터빈 베인에 부딪히면 터빈 베인의 흐름을 따라 움직이게 하는 힘을 가합니다.

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Force Vectors

힘 벡터

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Introduction to force

force, motion, and mechanical effects

Force changes the motion, shape, or orientation of an object. A flowing stream of water can push on a turbine vane and make it move in the direction of the flow. In mechanics, force is treated as a vector quantity, which means it has both magnitude and direction. It is measured in newtons, or N, in the SI unit system.

Forces can act through direct contact or without contact. A push or pull is a contact force. Magnetic and gravitational forces are examples of non-contact interactions. For an object with a mass of 1 kg that accelerates at 1 m/s2, the applied force is 1 N.

When a rigid body is under load, mechanics separates the effects into external forces and internal forces. External forces produce the reactive forces that the body exerts on its surroundings. These can include body weight, forces applied by people, and frictional forces. Internal effects are the stresses and deformations that develop inside the material.

A bracket loaded by an external force shows both kinds of effects. The foundation and bolts react to the force on the bracket. At the same time, internal stresses and deformations spread through the bracket material. These internal forces depend on the material properties and the shape of the body.

The principle of transmissibility explains what happens when the point of application of a force moves along the same line of action. If the force stays on that line, the resultant force on a rigid body does not change. Two equal forces on a rigid body can therefore be treated as a single equivalent force when they act along the same line of action.

Force, Motion, and Mechanical Effects

scalar and vectors

Scalar vs Vector Quantities in Mechanics

Scalar and vector quantities are two main ways to describe physical quantities in mechanics. Common examples include force, speed, velocity, and work. Some of these are scalars, and others are vectors. A scalar is a quantity that has magnitude only. It does not need direction. Mass, area, and length are examples of scalar quantities. Scalars with the same units can be added or subtracted like ordinary numbers. A class that ends 10 min earlier than 50 min lasts 50 min minus 10 min, which is 40...

vector operations

Adding and Multiplying Vectors

Vectors are quantities with both magnitude and direction, and their operations include addition, subtraction, and scalar multiplication. Scalar multiplication means a vector is multiplied by a scalar value, which creates a new vector with a different magnitude. If the scalar is positive, the direction stays the same. If the scalar is negative, the direction reverses. A common example is momentum, which comes from multiplying mass by velocity. In this case, mass is the scalar quantity and...

introduction to force

Force changes the motion, shape, or orientation of an object. A flowing stream of water can push on a turbine vane and make it move in the direction of the flow. In mechanics, force is treated as a vector quantity, which means it has both magnitude and direction. It is measured in newtons, or N, in the SI unit system. Forces can act through direct contact or without contact. A push or pull is a contact force. Magnetic and gravitational forces are examples of non-contact interactions. For an...

force classification

Types of Forces in Physics

Forces in physics can be grouped by how they act and where they come from. These groups help describe motion, behavior, and equilibrium in the physical world. They are also useful in physics and engineering. One common way to classify forces is by whether they need contact. Contact forces act only when two objects touch. Frictional force, tension, and normal force are all contact forces that come from surface contact. Forces can also act without physical touch. These are called non-contact...

vector addition of forces

Resultant Force from Tugboats

Resultant force can be found with vector addition when two or more forces act on the same object. This idea helps explain how multiple pulls combine to create one net force. It is a key tool for understanding motion in physics. A clear example is a ship pulled by two small tugboats. The forces, F1 and F2, act at the same time but in different directions. The net force on the ship is the vector sum of those two forces. The parallelogram law gives a geometric way to add vectors. In this method,...

two-dimensional force system

Resolving Forces in a Plane

Resolving forces in a plane is a key part of two-dimensional mechanical analysis. A force vector can be split into x- and y-components, which show how the force acts in each direction. These components are written with the help of unit vectors, one for the x direction and one for the y direction. To find the components in a Cartesian coordinate system, first identify the angle theta between the force and the positive x-axis. If the line of action passes through the origin, basic trigonometry...

two-dimensional force system: problem solving

two-dimensional-force-system-problem-solving

Two-Dimensional Forces: Free-Body Analysis

Two-dimensional force analysis starts with a free-body diagram. A free-body diagram shows the object and every external force acting on it. It includes each force’s size, direction, and point of application. After the diagram is drawn, each force is broken into x- and y-components. This uses vector analysis and trigonometry, especially sine and cosine. The forces can then be written in Cartesian vector form, which makes them easier to work with. Next, the components in each direction are...

scalar notation

Vector Components for Force Calculations

Scalar notation helps simplify vector calculations by breaking a vector into separate x and y parts. When vectors are added or subtracted, each component can be handled on its own using scalar notation. This makes force problems easier to solve.

cartesian vector notation

Vector Components in 3D Space

Cartesian vector notation shows how to write vectors in three-dimensional space using x, y, and z components. It gives a clear way to represent direction and size for quantities used in mechanical engineering. The notation uses the unit vectors i, j, and k for the x, y, and z axes. A vector pointing in the direction (3, −4, 5) can be written as A = 3i - 4j + 5k. The unit vectors are i = (1, 0, 0), j = (0, 1, 0), and k = (0, 0, 1). This form is useful for describing displacement, velocity,...

direction cosines of a vector

Vector Orientation with Direction Cosines

Direction cosines describe how a vector is oriented relative to the x, y, and z axes. For a vector A written in Cartesian form with i, j, and k unit vectors, this idea helps connect the vector’s components to its direction in space. The magnitude of vector A is the square root of the sum of the squares of its components. Its direction is described by the coordinate direction angles α, β, and γ with the x, y, and z axes. These angles can be found by projecting vector A onto each axis. The...

three-dimensional force system

Force Components in 3D Space

A three-dimensional force system describes forces acting in x, y, and z directions. In mechanical engineering, this framework helps students and engineers study how objects and structures behave in three-dimensional space. One common example is a force acting on a particle in space. That force can be split into three parts: the x-component, the y-component, and the z-component. Vector mathematics is used to calculate each component, and together they make up the full three-dimensional force...

three-dimensional force system:problem solving

three-dimensional-force-systemproblem-solving

Resolving Forces in 3D Coordinates

Three-dimensional force systems involve forces acting in three different directions at the same time. These problems are common in physics and engineering. They are used to find the resultant force, which helps predict or analyze how an object or structure will behave. The first step is to resolve each force into scalar components. A scalar component is the amount of force along one axis. Trigonometric functions and vector addition are used to break the force into parts and then combine those...

position vectors

Using Position Vectors to Locate Points

Position vectors are used to locate points in space and show the direction and distance between two points. In math and science, they help describe spatial relationships and make calculations easier. A position vector can connect one point to another point or show a point’s location relative to the origin of coordinates. For a point P(x, y, z) relative to the origin O, the position vector r runs from O to P. In Cartesian vector form, it is written as r = x i + y j + z k. Here, i, j, and k are...

force vector along a line

Finding a Cable Force from Two Points

A cable force can be found from the two points that define its line of action. In three-dimensional statics, this setup often appears with a pole and a cable anchored to the ground. The cable ends are labeled A and B, and their position vectors are written as P_A and P_B. The position vector from A to B is found using the triangle law of vector addition. First, subtract P_A from P_B to get P_AB. Then find the magnitude of P_AB by taking the square root of the sum of the squares of its...

dot product

Using Dot Product to Find Work and Angle

The dot product connects vectors, work, and direction in mathematics and physics. In engineering, it is found by multiplying the magnitudes of two vectors and the cosine of the angle between them. It is shown with a dot symbol between the vectors. A real-world example is a vehicle pulling an object along the ground with a rope. If the rope is angled above the horizontal axis, the work done can be calculated with the dot product of the applied force and the object’s displacement. This makes the...

dot product: problem solving

Using the Dot Product to Solve Vector Questions

The dot product helps solve vector questions by combining vector size and the cosine of the angle between them. It is useful when the angle is measured anti-clockwise and when a problem asks for a vector relationship in component form. A good first step is to identify the question being asked. Then list the given vectors and write them in Cartesian form, also called component form. This makes the data easier to use in a calculation. Next, decide whether the dot product is the right operation.

cross product

Cross Product Direction and Magnitude

The cross product is a vector operation in vector algebra that creates a third vector from two input vectors. Unlike the scalar product, it does not give a single number. The result is a vector perpendicular to both original vectors. The size, or magnitude, of the cross product depends on the magnitudes of both vectors and the sine of the angle between them. A larger angle between the vectors gives a larger cross product magnitude. The direction is found with the right-hand rule. If the...

key terms and concepts

Learn how force changes motion, shape, and orientation, plus the difference between contact and non-contact forces, internal effects, and transmissibility.

Force, Motion, and Mechanical Effects | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Force, Motion, and Mechanical Effects

Description

Transcript

Tags